Related
How to upgrade from WM5 TO WM6
To upgrade your prophet to WM6 I recommend that you first of all downgrade to the NVID version of WM5 AKU2.2 and get the latest Active Sync:
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe YOU CAN USE Step1 of PdaMobiz or PDAViet Temp INSTEAD OF NVID(no vendor) AKU2.2 ROM...
2. After it has been downloaded get the latest Active Sync from Microsoft.com
3. Install active sync, you might need to reboot
4. When your computer has rebooted, run the file from step No 1 . Follow the steps, remember that it can take some time and seem to stuck at 80% and higher, but just wait.
5. When you have done this, your pda will reboot. After it comes with the welcome to windows mobile screen,"Tap Here To Begin",JUST LEAVE IT. In fact don't touch your device before the next steps are finished.
6. Now download one of the WM6 versions( http://forum.xda-developers.com/showpost.php?p=1279985&postcount=1 )
7. Now find a file named Upgrade.bat,and run it.(you don't have to run Step1 of PdaMobiz or PDAViet Temp,as you have already downgraded to AKU2.2)
8. Wait until the upgrade finishes(usually takes 12-15minutes)..WAIT WAIT WAIT
9. A message will be displayed in the dos box,and it will say that the upgrade is finished etc....etc...,now you HAVE to HARD RESET,to finish the upgrade and enjoy you new WM6!
How to downgrade from WM6 TO WM5
The downgrade process from WM6 to WM5 is pretty simple. All you have to do is to downgrade to WM5 NVID and after that upgrade to the WM5 you want:
1. Download the NVID(no vendor) AKU 2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exeYOU CAN USE Step1 of PdaMobiz or PDAViet Temp INSTEAD OF NVID(no vendor) AKU2.2 ROM...
2. After it has been downloaded get the latest Active Sync from Microsoft.com.. Simply search for "Active Sync"
3. Install active sync, you might need to reboot
4. When your PC is ready run the NVID file you downloaded in step1 and follow the guide, remember that it can take some time and seem to stuck at 80% and higher, but just wait
5. When its done downgrading to the NVID WM5 rom, you prophet will reset and you can upgrade to the version of WM5 you want.
NOTICE
If you use a different AKU 2.2 ROM(like PDAViet Temp),you may have two EXEs in the folder you extracted.Be careful and use the one that is made for your device:
FILENAME G3.EXE
is for G3 devices:IPL x.xx.0000, SPL x.xx.000.0 (this is shown when you reset)
FILENAME G4.EXE
is for G4 devices:IPL x.xx.0001, SPL x.xx.000.1 (this is shown when you reset)
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
How to switch or upgrade/downgrade between WM6 versions(for example PDAViet->Trueneytral)
1. First you have to downgrade to WM5 AKU2.2 using the WM6->WM5 guide(some say that you don't have to do that,but i believe that it's better to downgrade first rather than making a simple overwrite)
2. Now follow STEP 5 of the WM5->WM6 guide
Device doesn't connect to PC after flash
If your device doesn't connect to your PC after flash,just enter bootloader(press camera button+while pressing soft reset and hold,until a tri-color screen shows up),and flash the NoVendor WM5 Rom: http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe .Then repeat the whole process...
----------------------------------------------------------
KEEP IN MIND:
UPGRADING CAN BE DANGEROUS,YOU ARE RESPONSIBLE FOR THE DAMAGE TO YOUR PHONE
DO NOT RESTORE BACKUPS FROM ANY ROM OTHER THAN THE ONE IT WAS CREATED ON
THERE IS NO "BEST WM6 ROM",THE BEST IS THE ONE THAT WORKS BEST FOR YOU
(part of the guide is taken from Da9L's guide,in the WM6 Rom Collection)
I will edit/update this post soon and clean it up, ask questions in another thread, and by god please read the wiki first, 90% of the questions asked are answered in the wiki....
WM6 Upgrade Guide...reply
great info sir! thanks so much! downloading...i'll be happy to send feedbacks on this WM6 ROM! thanks again!
Thanx a lot tonydeli7 , very very good guide and a lot of ppl really needed it
Great
Thanks to you all. I have Qtek S200 and trobuled with WM6 it wonderfull guide for me thank you very much.
I need to downgrade to WM5, 'couse I cannot boot anymore. After running the setup I get an error that the device cannot be found. I have connected the S200 with the boot loader running.
Edit: Now it works on an "old" WinXP machine.
Huge Problem!!
Ok guys I am having a huge problem. I tried to upgrade to WM6 but when running the RUU and changing the rom, it encountered an error saying the nbf file cannot be installed on my pda phone and now my phone is stuck(i think permanantly) on the bootloader screen.
No matter what I do to try to fix this, IE: restart device, power down by removing battery, try to run the RUU again, nothing helps. Its is really stuck and I really need this cell phone.
PLEASE HELP IF YOU CAN.
Dan.
dharvey4651 said:
Ok guys I am having a huge problem. I tried to upgrade to WM6 but when running the RUU and changing the rom, it encountered an error saying the nbf file cannot be installed on my pda phone and now my phone is stuck(i think permanantly) on the bootloader screen.
No matter what I do to try to fix this, IE: restart device, power down by removing battery, try to run the RUU again, nothing helps. Its is really stuck and I really need this cell phone.
PLEASE HELP IF YOU CAN.
Dan.
Click to expand...
Click to collapse
Put you pda on bootloader mod... and try any of this rom's i have managed http://forum.xda-developers.com/showthread.php?t=316062
Stay cool!
I followed the instructions carefully, and my phone (Qtek S200) seemed to boot with WM6.0
However, after aligning screen, it tried to initialize the phone with some extended roms, a procedure which failed, and I had to soft reset.
After reboot, it seems to work fine.
Is it?
EDIT: Another thing I noticed is that keyboard is in THAI !!! How can I make US the default? Olso, I have Resco keyboard GR edition. Will this work with WM6?
tonydeli7 said:
1. Download the NVID(no vendor) AKU2.2 rom for WM5 here :http://rapidshare.com/files/17208693/RUU_Prophet_220734_2207114_024721_NVID.exe
Click to expand...
Click to collapse
Is this G3 only, or both?
I'm asking, because in PDAviet's temp file there are two different rom updaters, but in the file linked above there is only one.
yoda_143 said:
Is this G3 only, or both?
I'm asking, because in PDAviet's temp file there are two different rom updaters, but in the file linked above there is only one.
Click to expand...
Click to collapse
i don't know mate.i believe you can use pdaviet's temp instead of aku2.2 nvid...
Another thing I noticed, is that it looses pairing with my bt handsfree...
I am making the pairing, and works fine. However, when at night I am shutting off my hf in order to save battery, the next morning the pairing is gone.
Any solution to this?
i hav a problem!i have sucessful boot wit wm6 and everythings fine but only i can't access to contacts,everytme i press it will automatic switch back to today screen...and there is no autoconfig???anyone help???i can't save my contacts...
dufchan said:
i hav a problem!i have sucessful boot wit wm6 and everythings fine but only i can't access to contacts,everytme i press it will automatic switch back to today screen...and there is no autoconfig???anyone help???i can't save my contacts...
Click to expand...
Click to collapse
You've forgot to do a hard reset after flashing, please read one of the flashing guides.
I-mate Jamin
hello evrybody
i just wanted to know if i can upgrate my WM5 to WM6 on my I-mate JAMin?
rondol1 said:
You've forgot to do a hard reset after flashing, please read one of the flashing guides.
Click to expand...
Click to collapse
thank u very much!!now my dopod working fine!!thanks a lot!!
thanx for the guide
help me please..
P4k1t0 said:
Put you pda on bootloader mod... and try any of this rom's i have managed http://forum.xda-developers.com/showthread.php?t=316062
Stay cool!
Click to expand...
Click to collapse
how to do that?
thx..
Choice of ROM
Hello guys, tanks for a so nice job !
I would like to have more information about the choice of ROM.
I don't want any special feature, just the row wm6.
no programs added, no tweaky today, no bugs, no battery problem, etc etc
which one would fit that the best ?
thanks
Thnx for this man, much appreciated!
i had a t mobile g4 device which was simunlocked but not cid unlocked.
i upgrade only the radio version without cidunlocking it..
not i cant get gsm line in boot menu
the device cannot charge niether cannot be seen by my computer.
when i put in boot loader menu an coonect it to usb in boot loader menu
there is usb written in down left cornor but i cant load any room to even the original t mobile room
did i breach my phone..i think yes..
i can manage to replace my usb (phone usb not cable) does this will fix it or not
halder said:
i had a t mobile g4 device which was simunlocked but not cid unlocked.
i upgrade only the radio version without cidunlocking it..
not i cant get gsm line in boot menu
the device cannot charge niether cannot be seen by my computer.
when i put in boot loader menu an coonect it to usb in boot loader menu
there is usb written in down left cornor but i cant load any room to even the original t mobile room
did i breach my phone..i think yes..
i can manage to replace my usb (phone usb not cable) does this will fix it or not
Click to expand...
Click to collapse
read the post
How to flash a new ROM to your Wizard... a little tutorial!
http://forum.xda-developers.com/showthread.php?t=310831
G4.1 Does you're device start normally (yes) or is it stuck on the three-colored bootloader screen (no)? YES... go to step G4.4, NO go to step G4.2
G4.2 Turn off you're device totaly. Remove the SD card and disconnect the USB cable from you're device. Turn on the device while holding the camera button. You will get into bootloader mode (3 colored screen). Connect the USB cable to the computer and you will see USB at the bottom of your screen above the left softkey (Activesync will not connect in bootloader mode, but you can flash from this screen!). go to G4.3
G4.3 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G4.4.
G4.4 Is your device CID-unlocked (note: it's not the same as SIM-unlocked!)? YES... go to step G4.7, NO OR DON'T KNOW go to step G4.5. (note: CID-unlocking a G4 is only possible by paying for it at imei-check!)
G4.5 Download enable-rapi.zip. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND. Turn your device off and on or wait 5 minutes before soft resetting. Done? Go to G4.6.
G4.6 Follow this great thread by the-equinoxe: [solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED] and load the softSPL on your device using his method. Make sure you take a G4 safe rom (see the thread for details). After the steps you'll have the rom of your choise on your device!
G4.7 You're reade to flash the AKU2, AKU3, WM6 rom of you're choise IF the rom DOESN'T contain IPL/SPL. AKU3 and WM6 roms normally don't contain IPL/SPL. If you want to flash an AKU2 rom, make sure you take the G4 version. If you get an error 300 (invalid update tool) while trying to flash your device look at this thread!
NOTE: If you tried to flash a G3 rom with IPL/SPL in the rom on a G4 you probably will have a bricked device! DON'T flash the new 3.08 and 3.09 IPL/SPL to your G4!
NOTE2: If you got problems flashing with softSPL: Follow this great thread by mun_rus: Solutuion found: how to flash any rom to CIDLOCKED DEVICE. If your device won't start after flashing you can use step G4.2 and G4.3 and try again. Also look at this thread by eddieitman: Faria G4 Step by step installer with instructions to make sure you did all the necessary steps!
thank you thank you very much
if say thank from now till the end of this years its not enough for u
i did that and folow this tremendus amount of instruction.it work again ican not believe my eye.....
now can i upgrade it wm6
do u have a link for wm6 for g4
thank again
As soon as you load SoftSPL or HardSPL into your G4 Wizard, you should be able to use any new WM6 ROM released in the "Wizard WM6" subforum.
Just double check the ROM does not have IPL and SPL in it, then you can go flashing with equipped RUU directly.
And...make sure you have your T-Mobile original ROM or Wizard ROM ready in case of any accident during flashing so you can always return to original WM5.
Hi
My phone is I-mate k-jam (kind of G4).I unlocked my phone’s CID by hard SPL program from your website . I could not install phone’s original rom. Then I installed original rom by shelltools program. My phone is not operated after hard resetting. When I switch on my phone, it stopped in three-colored page. Please be kind enough to conduct me.
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
randomgoon said:
You need to remove the hard spl in order to go back to the original rom
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
START-sSPL.exe error : no device connected please help
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
LancerV said:
http://www.htcamerica.net/support/8125/software-downloads.html
I ran that just fine with HardSPL installed
Click to expand...
Click to collapse
is not installed
error [294] : invalid vender id
please help
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
hi
i installed K-JAM_Arabic_2160901_21609102_20710_ship.exe
error : [296] : upgrade only
this nbf file cannot be use for your pda phone. please get newer nbf file help please please
the-equinoxe said:
@behzad_sedat
What is the SPL version?
Invalid Vendor ID means it's not CID unlocked..
So you need the original i-mate ROM obviously. Not the HTC/Qtek ROM..
BTW.: Soft SPL doesn't work in bootloader, it needs WM 5/6 in order to load the Soft SPL.
Connect USB cable, kill wscecomm.exe (in PC's taskmanager) and start the RUU.
Forget the warning the Ruu tells you about having an active activesync connection. Flash the original iMate ROM.
Click to expand...
Click to collapse
ipl : 2.17.0001
spl : 2.17.0001
behzad_sedat said:
ipl : 2.17.0001
spl : 2.17.0001
Click to expand...
Click to collapse
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
the-equinoxe said:
You haven't got Hard SPL.
So only way to flash is original ROM (in original Language it came with).
Click to expand...
Click to collapse
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
behzad_sedat said:
Dear Sir
I explain my problem more accurat. I downloaded Soft SPL accompanied by Vodafone Qtek 9100 G4 IPl&SPL.zip after reading topic of How To Remove HardSPL and according teaching I transferred nk.nbf file from Vodafone Qtek 9100 G4 IPl&SPL.zip file to Soft SPL file .Then I wanted to perform Start-sSPL.exe file but I could not perform. Then I found Soft SPL is not operated in Bootloader.Then I performed 2.exe (ROMUpdateUtility MFC Application) file in Soft SPL file accidentally. I thought it is being installed. After accomplishment I found my phone’s spl has turned from olip to 2.17.0001.So I wanted to install original ram but I couldn’t install. It is installed wm6 on my phone completely now but it is stopped in spl page. I think I could not remove my phone’s hard spl completely. Please be kind enough to help me.
Click to expand...
Click to collapse
tyr the ,wizard love, rom did the trick for me
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
i cant download wizard love rom
You have requested http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar (54413 KB).
You have reached the download-limit for free-users. Want to download more?
Get your own Premium-account now! Instant download-access! (Or wait 92 minutes)
lol.. Wait 92 minutes then
bill4676 said:
tyr the ,wizard love, rom did the trick for me
Click to expand...
Click to collapse
Dear Sir
I installed rom of wizard love and my phone is operated.
Thank all of you
I was trying to make upgrade from wm5 to wm6,and was looking in tutorial xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide. First,I found a Upgrade_HardSPL_G4.rar, and did what was said in tutorial,copy the 3 files from the jumpspl.zip to the root directory of your Prophet and then unplug / disconnect Prophet,Execute the SPL.lnk IN THE DEVICE, then you see Prophet in all bright or white screen,Execute the ROMUpdateUtility_NV_G4 (I have a g4 device) to upgrade hardspl. I got message that my update utility was old and that I need new. Then I restarted device,just run ROMUpdateUtility_NV_G4 from the hardspl folder and instalation went smooth,pda restarted and worked well. Then I went back on xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide,found this sentence: ''Step 3 and 4 are necessary only if the WM6 rom you have downloaded instead of nk.nbf has os.nb file and the ExtROM folder'', and as I downloaded wm61_korand_3_1.rar that contains only nk.nbf file,I put it in Update_Package\Update Utilities,and run ROMUpdateUtility_NV_G4 fron that folder. The instalation finished and pda booted in bootloader. After that I tried flashing Shadow My Edition 2,no DualSIM,and followed the instructions to recover pda from wiki/ prophet recovery(downloaded PDAMobiz_Prophet_WM6_V1.00_Step1),everything was the same,always bootloader. Is there a help for my prophet? Could someone give me a step by step istruction how to bring it to life? Any help is welcome. Thanks
What is the IPL/SPL displayed?
Are you sure your device is a G4?
Try a hard reset.
Try this again: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
IPL 2.58.0001
SPL 2.58.0001
I'm sure that my device is g4. Did a hard reset and it went to bootloader again. Is there a hope? I will try http://wiki.xda-developers.com/index...ophet_recovery, but I noticed that when I run RUU and after verificatio informations on my pda it shows image version :_____________(blank),,then I click update,and then it shows
From:
image version :
To:
image version :
there is no numbers.
If you can enter bootloader, the device is recoverable.
HardSPL???
nikolah said:
I was trying to make upgrade from wm5 to wm6,and was looking in tutorial xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide. First,I found a Upgrade_HardSPL_G4.rar, and did what was said in tutorial,copy the 3 files from the jumpspl.zip to the root directory of your Prophet and then unplug / disconnect Prophet,Execute the SPL.lnk IN THE DEVICE, then you see Prophet in all bright or white screen,Execute the ROMUpdateUtility_NV_G4 (I have a g4 device) to upgrade hardspl. I got message that my update utility was old and that I need new. Then I restarted device,just run ROMUpdateUtility_NV_G4 from the hardspl folder and instalation went smooth,pda restarted and worked well. Then I went back on xda-developers > Prophet > Prophet mobile 6> New WM6 Upgrade Guide,found this sentence: ''Step 3 and 4 are necessary only if the WM6 rom you have downloaded instead of nk.nbf has os.nb file and the ExtROM folder'', and as I downloaded wm61_korand_3_1.rar that contains only nk.nbf file,I put it in Update_Package\Update Utilities,and run ROMUpdateUtility_NV_G4 fron that folder. The instalation finished and pda booted in bootloader. After that I tried flashing Shadow My Edition 2,no DualSIM,and followed the instructions to recover pda from wiki/ prophet recovery(downloaded PDAMobiz_Prophet_WM6_V1.00_Step1),everything was the same,always bootloader. Is there a help for my prophet? Could someone give me a step by step istruction how to bring it to life? Any help is welcome. Thanks
Click to expand...
Click to collapse
would you mind to read me thread?
dioxda2,I read your thread. and I will now try a other hardspl that you linked there. Was that the remark you wanted me to come to my notice?
Same Issue
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
georgexavier said:
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
Click to expand...
Click to collapse
there are sucessful cases , please read my post or.... are you using Vista?
If so, you need other solution. (not with me ... sorry ~~ )
georgexavier said:
I face the same issue.. have tried hard reset, hardSPL and downgrading to WM5 ROM.. only the downgrade is working.. but every time I try to upgrade to WM6 it enters RGB screen.. have tried with atleast 5 WM6 ROM... any senior member to help pls.
Click to expand...
Click to collapse
What is the SPL of your device?
When recovering to WM5 you better NOT use the Mobis step 1. Any other step 1 or NVID will be fine. The Mobis ROM is too manipulated for flashing their own WM6 ROM. It will give all kinds of problems when it is used for other purposes.
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
nikolah said:
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
Click to expand...
Click to collapse
see my thread la~~~~
dioxda2,I have read your thread. This is what I know at the moment,and what I think it should be done (correct me if I make any mistake):
-my pda boots in bootloader mode
-it shows on screen IPL:2.58.0001, SPL:2.58.0001
-it's G4 model
-it has no hardspl on it
First one wild shot:
1. Download this jumpspl http://forum.xda-developers.com/showthread.php?t=329147
2.follow the instructions,and instead nk.nbf file from desired rom I put a nk.nbf file found in hardspl rar archive to the SoftSPL folder ,and hopefully flash hrdspl.
3.from bootloader flash any desired wm6 rom with RUU
Second solution:
1.download PVTemp
2.try to flash it from bootloader
3.if it's ok,then on to the next step like on your page one for old method.
Is there something else,diferent way to do this from bootloader?
Thanks for all help
In bootloader, try to flash this: ftp://xda:[email protected]/RUU_Prophet_220734_2207114_024721_NVID.exe
nikolah said:
dioxda2,I have read your thread. This is what I know at the moment,and what I think it should be done (correct me if I make any mistake):
-my pda boots in bootloader mode
-it shows on screen IPL:2.58.0001, SPL:2.58.0001
-it's G4 model
-it has no hardspl on it
First one wild shot:
1. Download this jumpspl http://forum.xda-developers.com/showthread.php?t=329147
2.follow the instructions,and instead nk.nbf file from desired rom I put a nk.nbf file found in hardspl rar archive to the SoftSPL folder ,and hopefully flash hrdspl.
3.from bootloader flash any desired wm6 rom with RUU
Second solution:
1.download PVTemp
2.try to flash it from bootloader
3.if it's ok,then on to the next step like on your page one for old method.
Is there something else,diferent way to do this from bootloader?
Thanks for all help
Click to expand...
Click to collapse
Hi there ~~~~ tell you what~~ ^_^
1. there are 2 ways to upgrade
a. " New " Method.
b. " Old" method.
2. for more update rom flashing.... better have you device hardSPL.
then you can go by 3 means to flash....
1. straight upgrade that is: connect to PC via activesync, activate RUU right ahead ( I don't like this method as sometimes will stuck @ bootloader,
2. copy the 3 files from the jumpspl to the prophet's root directory then activate manually...
3. force bootloader ( by manually buttons combination and not reboot in 3 color hang )...
then 2 and 3 is fine, ( 3 is more convenience though), you should see " USB " at the bottom prophet screen if you did things right. ^_^,
then flash...... ^_^
This is my [size=+2]little handmade tool [/size], a combination tool with Taiwan Cook - YouZii and XDA cook - Korand,
just unzip, execute the " UPGRADE.cmd " , the some on screen clicks, wait and done. !!!
Don't forget to hardSPL before so. OK?
Enjoy ~~~
A Batch flashing tool and Korands clean rom 3.1... Check it out ! ^_^
P.S. Connection Error? Please try again ~~ ^_^
nikolah said:
I tried recovery with RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and it reported error,saying that it's only for upgrade. Where to find NVID
Click to expand...
Click to collapse
You will find it here:
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/
i just bought it and thinked it`s a rom problem....after reading many hours and writing wizard love rom molski aku 3.3...nothing changed ..tried tu update ipl spl but nothing ...hard reset do not work << FAT FORMAT..FORMAT FAILED >>i can do soft reset i can even flash it but nothing starts...if you know a solution please help me... the device ony shows ipl 2.16.0001
spl 3.08
i was a nokia fan no windows mobile devices...so please tutorial for stupids
Use the attached file... copy YOUR nk.nbf file in the folder you extracted
and then run ROMUpdateUtility.exe
1. Extract RUU_NoID.zip
2. Copy the nk.nbf from the wizard love rom
3. Paste in the RUU_NoID folder
4. Run ROMUpdateUtility.exe
5. Follw the instruction of the programm
6. be happy if it works
please heeeeeeeellllppppp
done that with wizard love and witn no ui utility...but nothing changed....i can write rom....it say`s congratulatios on rom installer...but pda still stuck on the same tricolor screen with the same ipl/spl :|
:S update ipl/spl to 3.08.0001 then do the update ? use the german tmobile aku... 3.3 http://www.t-mobile.de/downloads/t-mobile/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
wait a second and i`ll tell if it works
i uploaded t-mobile rom all ok but stiilllllll nothing changed :| wtffff
If you have an SD Card in your phone, take it out. That's it 99% of the time.
Myrddin Wyllt said:
If you have an SD Card in your phone, take it out. That's it 99% of the time.
Click to expand...
Click to collapse
no sd card nothing ...HOW CAN I REPAIR THIS STUbBORN THING ???
Sounds like memory has bad sectors.
You may be holding a brick. Sorry.