I need some help and I'm not technical... when using my XDAII with only a Jabra FreeSpeak BT250 I had no problems at all. Recently I had my car dealer install a bluetooth hands free system (Parrot CK3000 - www.bluedrive.com) in my car and when I pair with my XDAII the headset connection is lost with the Jabra becuase there is no handsfree option on the XDAII. As I understand it, I must have a headset profile for the Jabra and a handsfree profile for the CK3000. Is it possible to have two profiles on my XDAII for two types of connections? If so, how? If not, does anyone know how I could have two headset profiles that I could easilly switch between based on the pairing device I want to use? Please help...
Re: Headset option available but no Hands Free option on XDA
Charles said:
Is it possible to have two profiles on my XDAII for two types of connections? If so, how? If not, does anyone know how I could have two headset profiles that I could easilly switch between based on the pairing device I want to use? Please help...
Click to expand...
Click to collapse
Well, the XDA II comes with Microsoft's Bluetooth stack, and that stack just does not implement the Handsfree Profile. Some people have, with some degree of success, installed a Widcomm Bluetooth stack on an XDA II. However, as the Widcomm stack was never officially ported to the XDA II, it cannot completely replace the Microsoft stack, so that solution has a few quirks (having two stacks, and switching betrween them for different applications). If you want to try that, just search for "Widcomm". Be advised, however, that the Widcomm stack is not freeware, and is not sold separately. So, all version you find are pirated.
Then there are the Pocket Bluetooth Tools (http://bluetooth.i-networx.de). I think they would allow you to have more than one Bluetooth headset paired with your XAD II, but unfortunately at least the version 1.1.0 does not work with your Parrot. I know that for sure, because I have a Parrot CK-3000 myself (firmware 3.13), and no matter what I tried, it didn't work.
And this is where your options end... no luck, I am afraid.
Cheers
Daniel
Two BT Stacks...what are the potential problems
Thanks for the initial support...very helpful!
If I install the Widcomm Bluetooth software what functions will not be supported/available. I currently have he Jabra FreeSpeak BT250 and the Parrot CK-3000 I would like to pair but also have a BT Sony Vaio Laptop PCG-Z1WAMP3 that I will pair over the next few days and plans to purchase a BT GPS unit in a week that works on the XDAII and the Laptop. Will Widcomm software support all my needs or will it fall short.
PS - before reading your post I tried Pocket Bluetooth Tools (http://bluetooth.i-networx.de) version 1.1.0 and I could not pair the two either. I was initially happy and finally maddened! Should this be removed before adding Widcomm if I do elect to proceed?
Cances of getting anything to work with your sony vaio (other than other sony kit) are slim, sony use their own peculiar bluetooth stack and it doesn't support any but the most basic profiles on any other stack. If I try to search services on my sony c1-mhp from my xda 2 with either widcomm stack or microsoft stack all i get is a load of serial ports.
I did see a thread a while ago about using the widcomm stack on a vaio, but can't remember where.
Re: Two BT Stacks...what are the potential problems
Charles said:
Will Widcomm software support all my needs or will it fall short.
PS - before reading your post I tried Pocket Bluetooth Tools (http://bluetooth.i-networx.de) version 1.1.0 and I could not pair the two either. I was initially happy and finally maddened! Should this be removed before adding Widcomm if I do elect to proceed?
Click to expand...
Click to collapse
Well, it'll be hard enough to get two stacks together working on one hardware, so I don't think it'll be a good idea to add a third player (the Bluetooth Tools) to the game.
I had the Widcomm installed only very briefly. Some time after that, more elaborate instructions on how to install and set up the beast occured on this forum, so your best bet is to search the forum for "Widcomm" and read everything you find. Be warned - it still is a big hack that involves manually adjusting Registry entries and such things.
Cheers
Daniel
Sorry if it has been answered before, but I tried searching and it came up with about 1500 responses... :roll:
I used the Broadcomm BT stack but it doesn't support the headset profile. So I removed them, but during the removal process my 2020 hard reseted... Any way I got up and working with a fresh backup with the standard MS BT Stack, but now the Bluetooth Headset Plugin in the Today Screen, the one used to set on or off the Headset option has dissapeared. Now I paired my BT headset but have no way to start the BT Handsfree profile since I miss the BT Plugin... Any way to find it back?
Thanx and sorry for the mess...
Thanx for your... help. Solved the problem.
welcome
after i bought my new VW Passat CC, i realized i couldnt pair my Niki with Manila Rom to the car.
i spoke to VW and they said the BT car was compatible with all phones with SAP application, and they gave me list of Nokia compatible models. most of the nokia models are old, so i figured if i could get an old Niki Rom, i could pair it.
by luck, i tried the NETRUNNER Portuguese Oficial Rom and i found the SAP aplication. after i activate the remote sap, i paired the Niki to the car
like you all know, that Rom has alot of bugs.
what i want to know, is, what roms have this SAP aplication.
In my previous HTC Polaris i can to start "Cyberon Voice Commander" simply pushing the button of headset bluetooth, the voice of program make me questions via bluetooth headset and i answer via bluetooth headset (in car my device can be locket in my pocket).
Now in Neotouch this function it is not supported, questions & answers works only via speacker and microphone of device (needless !!!!!!!!! in car).
Can someone to help me to find a solution ?
nb: i try to solve with JETware Hands-free Extension but don't work.
Thank's in advance
I have TomTom Navigator 7.913(9189) on my Leo. It is a custom ROM using the latest shipping base & packages (3.14) and WM 6.5.3 (5.2.23152). I have a Bluetooth carkit (XCarLink) and the pairing is set up OK as far as I can see. The XCarLink has Hands-free and Stereo Audio. Playing music is fine, however the audio from TomTom is at maximum and whatever I change the volume to in TomTom it stays the same. It is so bad that there is clipping. I have changed the 'Link volume to car speed' to enabled and disabled and there is no difference.
I had the same version (same .CAB) on my Blackstone and the audio worked perfectly on this.
Any ideas?
Andy
Hi,
had a similar problem with the Mobile Navigator
I think it has something to do with HTC's own Bluetooth stack.
Strangely, it was not at all tested Costumrom's
One solution I have not found yet.
Hi!
This is just to let you know taht you are not alone. I got the very same problem on my HD2, Jabra connector and Navigator.
The problem apears just using blutooth, using the earphone jack it works flaweless.
I would appreciate any help.
Thanks
Gabriel
After a lot of searching I now understand that the BT stack on the HD2 is the Widcomm/Broadcom BT stack and this is the issue. On the Blackstone its the MS BT stack. Apparently the Broadcom stack doesn't support volume control - this is supposedly a function of the bluetooth audio device and the volume must be controlled by it. Its not part of the BT standard if I am to believe other posts? This is obviously different from how the MS stack worked as this worked perfectly on my Blackstone.
I did some research into maybe getting the MS stack transplanted back into the HD2 ROM but I never got very far with it - I assume its possible as the Windows Phone 7 ROMs for the HD2 have the MS BT Stack don't they? Plus all the HD2 Android ROMs using other drivers for the BT?
Andy