Hello, I have just opened my S200 and I saw that the LCD connector on the mainboard is missing its top part (part that soldiers LCD flex cable into MB)
I plug the LCD into it but the picture is white only. Please tell me what can I do, and is it repairable? I saw that connector on eBay but I am not sure if it can be fixed... here is the eBay item
And in addition, I destroyed speaker while trying to plug lcd flex into it's spot
use the search function and you will find this :
http://forum.xda-developers.com/showthread.php?t=386289
Related
I am looking for the Rigid-Flex Board with ribbon cables attached that sits behind the LCD and is the board that the Front Keypad inputs to... Anyone got one that they could part with? It is part #:50H10045-01M I believe...
Thanks,
just dropped qtek and lcd is broken :S
on the ebay I ve found the replacement but theres a notice
series 1-P/N: 60H00018-00 AND series 2-P/N: 60H00038-00, have different lcd screens
how to know which qtek is mine ?
(PN under the battery is 99HAB025-00 T01)
thank you
ok answer was logical so here it is if you need it sometime...
when you disasemble the PDA
http://www.pdacenter.ru/razborka/razbor_htc_blue_angel/
on the back of the LCD there is a flat cable, it comes in 2 colours golden (its his natural colour) and silver (have silver sticker over the cable) also there is SN on the back which is one of the mentioned above...
Now Im waiting for the LCD and then I ll try to asemble it...
I am having trouble identifying properly what colour flex cable LCD replacement I need to get. I've opened my SPV M3100 but the flex I see is striped, black and gold! Is there any way to tell definitively. Please help I'm confused and need to buy a new screen ASAP.
Hey, first time tread starter and maybe there is a tread already for my question but I cant find it. So my question is, on my atrix 4g, I was replacing the digitizer and when I was pulling up the triangle/ arrow part of the flex cable that snaps onto the digitizer connector I ripped it off on accident, I wanted to know if that would be a cause for my brand new digitizer not working?
I already ordered the flex cable off ebay and it should be here by the end of the week. I buy and sell phones on ebay so I know how common it is to get bad digitizers.
I am asking here in order to see if that ripped triangle/ arrow that points down on the flex cable is the cause of the non working digitizer or is it the a faulty digitizer from the seller that sold it to me?
I am attaching a picture of the piece I ripped off, it is circled in red. If it cant be seen please let me know, as I have never done this before.
Hi!
I have broken the display on my Z2.
I have ordered a new one online and changed it. Soon I realized it's not working properly (ghost touches and unresponsive screen). After looking for a solution, I found out that this may be a grounding problem.
Since i saw, that the new display didn't come with adhesive covers for the chips on the flex cable, i have fitted them from the original display, but the problem still persists.
So how do I properly ground the display?
Does the bottom metal part of the display flex cable, have to touch the metal part of the frame? I suspect that sometimes it doesnt (new display didn't have the grey adhesive, the original had - but I can't remove it). Do I have to fix it with some kind of conducting adhesive?.
What about the top metal part of the display flex cable? Must it touch (ground) somwhere or it's not neccessary?.
Do I have to be carefull that some parts of the flex cable doesnt touch some other part of the phone?
BTW, I know the display isn't faulty because if I remove the back cover, sometimes i get perfect screen rensponse (maybe i ground it with my hand).
Thanks in advance.