Hi all!
I'm searching for some kind of weatherproof box to use on my Dragstar.
Something not too bulky and with recharge connection possibility.
So, if anyone has ever made or bought this kind of fixation, please, share your experience!
For now I'm using Krusell BikeHolder with PDair Aluminium Case and thinking about Krusell ORBIT FLEX. Both are not weatherproof, so just for café rides...
Thanks!
The product you are looking for is the Otterbox 3600 - my mates use them on their trail bikes and they are the dogs danglies. It is big and bulky byt it is crush proof and waterproof. you need to buy the box (about £60) and a handlebar mount. they also have an access hatch top and bottom to run leads through for charging and headphones.
Good luck and post pics
Thanks, matt_not_andrew. I know them well, even thought about Armor 2600, but it is still a little bulky. I don't make trial rides, just highways' journeys, so a good rain protection can be enough.
Thanks anyway for an advice!
matt_not_andrew said:
The product you are looking for is the Otterbox 3600 - my mates use them on their trail bikes and they are the dogs danglies. It is big and bulky byt it is crush proof and waterproof. you need to buy the box (about £60) and a handlebar mount. they also have an access hatch top and bottom to run leads through for charging and headphones.
Good luck and post pics
Click to expand...
Click to collapse
Hello. I have ordered the Otterbox 1900 and it will be interesting to how to fit my Blackbird ..
My DIY approach:-
I bought a transparent pencil case for 30 pence and cut it to size around the Blackstone. Sewed up the edges with linen thread and glue and kept the zip on one side for inserting the phone. I had a handlebar mount from an old TomTom Rider unit and I attach my case with the phone on to this mount using heavy duty velcro. I made a little whole at the bottom of the case to accept the usb lead for charging from the cigarette lighter socket. It never comes off but I attached a piece of string/cord on the zip which clips around the handlebars in case it ever did fall off.
It's probably not completely waterproof at the seams but I have used it in all weathers and not had any problems so far.
I recently glued an old bicycle inner tube around the seam edges cut to size to give it extra protection. Not the prettiest but very light and functional. Use it a lot on my motorbike
Aquapak and velcro.
I've had a RAM mount for a while now and use it on my Thundercat. Cost about fifty quid including the aquabox, arm and mount for handlebars and it works a treat. I've only had my HD for a couple of days and haven't tried it in the box to see if it fits yet (I used to use it with orbit 2 and it fit with room to spare). I'll try it this weekend though.
Just checked and the Touch HD fits in the RAM mount aquabox
Super! Can you tell me which one exactly?
fishes234 said:
Just checked and the Touch HD fits in the RAM mount aquabox
Click to expand...
Click to collapse
Cool! I'm at the verge of ordering the Ram mount Aqua box with handlebar fixture. But would like to know in what size box the HD fits (I suspect the medium...) and if it fits well in there (no sliding around or anything). So any info will be much appreciated.
Yep it was medium from memory - will check for sure later today if I remember when I get home. I got the short arm, the ball that bolts on to the back and there's a bracket that bolts on to the clamp of my clip on - I could take a pic if that would be helpful?
Did my Otterbox 1900 today, and HD is perfectly suited to touch screen. I have mounted RAMmount ball Clutch-reservoir and an arm that goes to the Otterbox None problem to see the dashboard either .. Satisfied with the deal.
fishes234 said:
Yep it was medium from memory - will check for sure later today if I remember when I get home. I got the short arm, the ball that bolts on to the back and there's a bracket that bolts on to the clamp of my clip on - I could take a pic if that would be helpful?
Click to expand...
Click to collapse
Yes, a picture (if possible with the Touch HD in it ) will be much appreciated. That way I can see what it actually looks like instead of the commercial pictures. Thanks is advance.
Oooh, this I can't wait to see. If it works good on your clipon, I'll order a set myself.
Want to use my blacstone w/garmin mobile xt on my new bike
Edit: Sorry, forgot to mention that it's the ram aqua box I'm interessted in
And has somebody tried an Otterbox 2600 Series PDA Case ? It is a little smaller than 1900, but as the interior dimensions fit, it can be a deal.
XOMYT said:
And has somebody tried an Otterbox 2600 Series PDA Case ? It is a little smaller than 1900, but as the interior dimensions fit, it can be a deal.
Click to expand...
Click to collapse
Hello.
Right that you look after the Otterbox.
Good quality.
I have rammounts aquabox and in comparison this is aquaboxs screen NOT so clearly transparent..my otterbox is better clearly screen and much better touchrespons.
Right then, it's the medium aquabox this one
http://www.ram-mount-uk.com/ram-hol-aq2.htm
I've attached a picture of it mounted on the bike. As you can see it's bolted on to the clipon clamp: you just loosen the arma and take the arm and box with you, leaving the bracket and ball attached to the bike. I got the short arm which is more than sufficient I think and you can pull it upwards towards you either in bright sunshine or when you've got a fully loaded tankbag on the bike. The lens bit could be better I guess, but it does the job - the only thing you have to do is make sure you don't get any raindrops inside when it's raining otherwise it tends to steam up with the heat of the phone.
I run a USB cable through a hole drilled in the bottom of the aquabox, down the side of the tank and under the seat where it plugs into a cigarette lighter usb charger which plugs into a maplin lighter socket and into the battery.
Dude, thanks this is exactly what I am thinking about buying.
Would you mind taking a picture of just the bracket with the ball? I mean, when you've detached the arm/aqua box?
The question is what bracket to buy. Is it the RAM Motorcycle Zinc Coated 0.75" To 1.25" Rail Or Handlebar U-Bolt Base?
or the RAM Universal Brake/Clutch & Handlebar Combination Kit?
And they even have more to choose from. I don't even understand how to fix the Brake/Clutch Reservoir Base...
Ah, found the motorcycle mount wizard, which tells me that it's the first one I mentioned...
The bit that bolts to the clip on is this
http://www.ram-mount-uk.com/ram-b-309-1.htm
This bolts on to the bottom of the aqua box
http://www.ram-mount-uk.com/ram-b-202.htm
And one of these arms
http://www.ram-mount-uk.com/ram-b-201.htm
http://www.ram-mount-uk.com/ram-b-201a.htm
Great thread guys, I've been looking at exactly the same mount myself and its good to know it won't be a waste of money!
Related
http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Found this car mount for the G1. As opposed to the universal ones which are significantly bulkier and honestly dont look that good. This one is sleek and will let you open the G1 to keyboard mode without undocking he phone.
I've ordered it. I'll let you know in a few weeks
Any updated?
This thing looks great and cheap!
Nope. Thats the downfall with getting things from HK off Ebay. Takes forever.
I will post a review maybe take some pictures. I really hope it lets me open the screen and use it full out.
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
Thats the downfall with getting things from HK off Ebay. Takes forever.
Click to expand...
Click to collapse
True!!
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
Click to expand...
Click to collapse
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
tehseano said:
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
Click to expand...
Click to collapse
I don't own one 'yet' because the site says it will be available around 12/30. Looking at the pic, it doesn't seem to interfere with the operation of the phone... meaning you can still slide it open as well as charge it.
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
I got this one to use in my car and love it! Charger fits in and it can be rotated in any direction. Plus you can move it from car to car without messy window rings. http://www.amazon.com/gp/product/B001UGMTKC/ref=oss_T15_product
mrhousto said:
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
Click to expand...
Click to collapse
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
billquinn1 said:
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
Click to expand...
Click to collapse
You can never go wrong with a dremel tool!! I didn't know that those ebay holders cover up the speaker too. It kinda makes the phone useless while its in there. I got the idea for the one I made off the proclip website. Rather than spending $30 bucks for theirs, I just made my own! I popped the trim off from around the heater/radio and used 3M double sided tape to secure the metal bracket that I bent to shape. Then used another piece of 3M to secure the back portion of the clear cover to the bracket. Of course, I put the 'Dual' sticker on there just for kicks!!!
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
tekkitan said:
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
Click to expand...
Click to collapse
A little pricey..... I guess!
hi all, i got myself one of these and it comes with a car charger. though i found the cord was not long enough from my cigarette lighter to windscreen.
http://www.amazon.co.uk/Dedicated-W...3?ie=UTF8&s=electronics&qid=1262888830&sr=8-3
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
**Unable to post link due to my restrictions I guess. See mrhousto's original post**
mrhousto
Click to expand...
Click to collapse
So I didn't see anyone comment on this yet. But I went ahead and bought this due to the decent price and what appeared to be the ability to open it while mounted.
So the answer is definitely "yes" to everything I wanted from it.
Yes, it does allow you to open the screen while mounted.
Yes, the clip does hold the phone very well and it is pretty easy to put and remove the phone with one hand.
Yes, you can plug in a charger while mounted and you don't have to remove the little charger door to use it.
Yes, there is a hole in the back so the speaker/camera is exposed so I guess you could record video, or take pictures while driving if that is something you wanted to do. Also, the microphone on the bottom is not blocked in case you want to just use speakerphone while mounted.
Yes, it feels very solid and well made. It says it "Made in Germany" on all of the parts which makes me feel good. "The German's make good stuff!"
Yes, The body clip itself does come off the arm so you could in theory use this for a different phone assuming you can get just the body clip online.
No, you cannot use this with anything other then a regular sized battery/door. (hopefully this was obvious)
Overall, for $20-$25 (depending on shipping), this is an awesome mount for your G1. I haven't actually tried mounting it on my window yet but the big suction cup (~3 inches wide) with the pull lever thing look like they will work great.
Boogy
Ather said:
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
True!!
Click to expand...
Click to collapse
I order this one and finally got it.
It doesn't seem to fit in the way the picture is. The picture shows the "big" tab at the bottom. The problem with this is that it covers the hole for the charger. Also for me it doesn't quite fit so the top tab doesn't clip on to anything and doesn't hold the phone.
If I put it in upside down then the small tab doesn't cover the hole for the charger and it seems to fit nice an snug. But when it is in upside down you can no longer slide it open as the bigger tab is clipped onto the front. That is no big deal for me any ways as I don't plan on opening it while it is in the holder in the car.
the perfect mount/ who needs a navigation system
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
zodagreat said:
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
Click to expand...
Click to collapse
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
benmyers2941 said:
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
Click to expand...
Click to collapse
thats nice and everything, wonderful price...but uuhh...its intended purpose are for navigation devices, although it may have no problem holding, I don't think it would allow all of the g1 usage in dock such as rotating landscape/portrait, opening/closing keyboard, charging with dual 3.5 headset jack/usb extention.
Are there any good carmounts that fit a g1 with the extended battery back cover?
is there any sort of wall/swivel mount/bracket thing for the gtab? or for just any tablet in general?
i want to be able to clip it on or near my bed so i can watch stuff in bed. that would be the ultimate.
gotwillk said:
is there any sort of wall/swivel mount/bracket thing for the gtab? or for just any tablet in general?
i want to be able to clip it on or near my bed so i can watch stuff in bed. that would be the ultimate.
Click to expand...
Click to collapse
I hate to admit it but I'm looking for something similar too. Id like an arm that the dock can stand on.
We're open for low cost ideas?
Sent from my SGH-T959
Someone else mentioned the mountguys.com
I checked it out and while they may not have exactly what you need, they have more mounts for more devices in more places than even where the sunshines!
insight3fl said:
Someone else mentioned the mountguys.com
I checked it out and while they may not have exactly what you need, they have more mounts for more devices in more places than even where the sunshines!
Click to expand...
Click to collapse
yea i checked out mount guys but their stuff isn't that descriptive and only 1 pic of the product.
i'm looking for some like a strong, flexible neck that also has a strong clip so i can just clip it. i don't want to drill any holes in my wall or anything.
Am I the only person thinking really hard about one of these?
joby.com /store /gorillamobile /original
I'm sure I could stuff it in my cup holder just fine, and my nightstand, headboard, lap, living room ottoman...
My only curiousity is if it would support the gtablet..
rswindle said:
Am I the only person thinking really hard about one of these?
joby.com /store /gorillamobile /original
I'm sure I could stuff it in my cup holder just fine, and my nightstand, headboard, lap, living room ottoman...
My only curiousity is if it would support the gtablet..
Click to expand...
Click to collapse
i can't speak for joby products but i've tried something very similar to these and i am pretty sure they won't be able to hold up the gtab. i noticed they don't even have one for the ipad. or any tablet for that matter.
Have you seen the Rocketfish Apple iPad Stand? I saw one of these at Best Buy today for $59.99. I did a quick search for reviews on my blackberry and decided not to get one. It's got 3 sizes of rubber pads which, I think, would allow it to be used to different tablets.
Can't post a link yet, so you'll need to google it.
I'm using a plate hanger I picked for 2. bucks to hang the tab on my wall.
so i guess no one has created or found a way for this to happen yet huh?
it2steve said:
I hate to admit it but I'm looking for something similar too. Id like an arm that the dock can stand on.
We're open for low cost ideas?
Sent from my SGH-T959
Click to expand...
Click to collapse
Your best bet may be to try one of those document holders secretaries would use in the olden days to hold up a document while they would type out a memo or the like. I'd bet a search of Staples' website may give you guys some possible ideas.
Modification
I have not tried this (and have no need) but what about taking a clip on lamp with a flexible arm or even an articulating arm and changing out the bulb socket with one of the cup holder mounts... a few screws or nuts and bolts to hold it tight in the lamp socket ...
http://www.officedepot.com/a/products/681811/Starlite-Clip-On-Task-Lamp-Silver/
http://witglobal.com/goods-2005-Car...nic+Gtablet+10+Car+holder+-Free+Shipping.html
.... or how about a simple tripod with a piece of wood as the base mounted with the camera mount and then either velcro or a combination of wood strips on bottom, top and right side to keep in place. You could place it very close to the side of your bed and use the tripod arm to find the perfect viewing angle.
http://www.overstock.com/Electronic...sional-Heavy-Duty-Tripod/2967060/product.html
http://www.overstock.com/Electronic...or-U-5500-6600-8000-9000/4463658/product.html
Just some thoughts..
anjenaire said:
I have not tried this (and have no need) but what about taking a clip on lamp with a flexible arm or even an articulating arm and changing out the bulb socket with one of the cup holder mounts... a few screws or nuts and bolts to hold it tight in the lamp socket ...
http://www.officedepot.com/a/products/681811/Starlite-Clip-On-Task-Lamp-Silver/
http://witglobal.com/goods-2005-Car...nic+Gtablet+10+Car+holder+-Free+Shipping.html
.... or how about a simple tripod with a piece of wood as the base mounted with the camera mount and then either velcro or a combination of wood strips on bottom, top and right side to keep in place. You could place it very close to the side of your bed and use the tripod arm to find the perfect viewing angle.
http://www.overstock.com/Electronic...sional-Heavy-Duty-Tripod/2967060/product.html
http://www.overstock.com/Electronic...or-U-5500-6600-8000-9000/4463658/product.html
Just some thoughts..
Click to expand...
Click to collapse
thanks for the links! i've actually thought about repurposing a lamp's bendable neck and just attaching some kinda clamp so it can hold up the gtab. the thing is though, the gtab is pretty heavy. the neck would have to be pretty sturdy, and most lamp's have a pretty weak neck. not meant to hold up about a pound and a half of weight.
so i bought this from amazon: http://www.amazon.com/PHR-NB-PB2-26...1?s=electronics&ie=UTF8&qid=1296063786&sr=1-1 the neck is strong but its still not strong enough. i only bought it because it said its made for a dell inspiron mini 9, so i thought for sure it can handle the weight of the gtab. but the clamp didn't fit the gtab properly. the tab was about half an inch bigger than the clamp. and the way i had it positioned on my bed, the neck was not strong enough to hold the tab up. it used suction, and although that was strong, it would still fall off sometimes.
so what i'm looking for is a clip, with a strong neck, and has a clamp that will snap into place around the gtab so it can hold it in place. if i can buy this somewhere, i will be all over it. i can make it myself but it would take me a really long time because i don't have the workspace or time to make it. i'm not that good with arts and crafts stuff lol.
oh and i can't use a tripod because i'm on the top bunk on a bunk bed.
Ok next thought... top bunk ... could you mount a cable (Home Depot) and use pullies? Yes, I found those lights even are a bit tough to manuever and maintain position with just a light bulb in it. I like the type that has articulating arms with springs. Those springs can be beefed up with rubber bands. The next best thing would be a computer monitoring arm but it sounds like you couldn't drill into the bunk bed... so how about the PC monitoring arm and mount it to a piece of wood and then use come C clamps to clamp the wood to the bunk bed. Oh I just found this: http://www.amazon.com/Inland-Monito...3?s=electronics&ie=UTF8&qid=1296069779&sr=1-3
or even this: http://www.amazon.com/Adjustable-Ti...?s=electronics&ie=UTF8&qid=1296069779&sr=1-14
and then again either de-construct your existing holder or construct a velcro based holder... piece of wood or purchase a copy holder and velcro from staples: http://www.staples.com/Staples-BookLift-Copy-Holder/product_515621?cmArea=sku_pd_box1 and http://www.staples.com/VELCRO-Brand-STICKY-BACK-Fasteners-Black/product_31402?cmArea=SEARCH.. Bolt the copyholder (book holder) to the arm, and use velcro to further secure the holder to the arm. A little bit of DIY but should work well up on the top bunk.
yea C clamps can work. and velcro. dunno why i didn't think of velcro. i'm gonna have to do some measurements and figure this out. i have a bookgem holder so i'm gonna see if i can velcro the back of that and attach it to a C clamp arm. that way, i don't have to stick ugly velcro on the back of the tab and i can use the bookgem to clamp the tab in place. thing is i have to figure out how much velcro i can put on the back of that bookgem and if the bookgem will stick. there's not a lot of surface area on the back of that thing. if not, i'll have to find another backing. maybe a piece of wood like you said or the copy holder.
thanks for all the suggestions!
DealXtreme has mount for the iPad which should do the trick;
Car Windshield Swivel Mount Holder for iPad SKU# 47030
Has suction pad for mounting.
If you want a desk or wall mount, consider the Ergotron line of products - http://www.ergotron.com/ - I can vouch for the desk mounted monitor arm and they have a laptop tray attachment - http://www.ergotron.com/Products/tabid/65/PRDID/147/Default.aspx - which looks like it would work for our tablets. (The end of the arm can be adjusted so that the laptop tray is at an angle more suitable for a tablet screen)
Has anyone actually tried one of the windshield mounts?
This one on Amazon doesn't exactly had rave reviews - http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
I just received this from Amazon...
http://www.amazon.com/gp/product/B005PR3IC0/ref=oh_o00_s00_i00_details
not sure if i like it...it seams secure, but i had a problem with it on a bike ride today and i think im going to send it back...anyone have a good one that they recomend?
i thought about getting one for my bike also, but then for some reason i don't think i want my expensive phone getting crushed if i happen to fall over or hit something.
surprisingly that never went through my head with my iphone.
Trident offers a bike mount for their Kraken case, which should be released soon. I've used RAM mounts before, very very sturdy.
one028 said:
not sure if i like it...it seams secure, but i had a problem with it on a bike ride today and i think im going to send it back...anyone have a good one that they recomend?
Click to expand...
Click to collapse
I ride with my wifes old Aria in an Otterbox (REAL Otterbox) + standard 4 hole GPS mount motorcycle mount. It stays in place pretty well, but no way to interact with the phone, so I gotta leave the screen on, and the box isn't that clear, has some amount of frosting to it, although I haven't had any problems reading through it.
Plusses are it's waterproof and pretty bomb proof, so if I get caught in the rain or wreck, the phone should be safe. It'd really be nice to be able to interact with it though. I have to stop, pop the latches, open the lid...
The Note actually fits in it if I take off the phone case, but I don't think I'll be riding with it like that.
Anywho, if you want, I'll look up the exact things I got.
I don't think it's a good idea to mount a bike on the Note. It's not that big...
Sent from my SGH-I717R
khaytsus said:
I ride with my wifes old Aria in an Otterbox (REAL Otterbox) + standard 4 hole GPS mount motorcycle mount. It stays in place pretty well, but no way to interact with the phone, so I gotta leave the screen on, and the box isn't that clear, has some amount of frosting to it, although I haven't had any problems reading through it.
Anywho, if you want, I'll look up the exact things I got.
Click to expand...
Click to collapse
Do you have a link for the mount? (and the case)
Thanks
I got the Samsung Car Holder for the Note which holds it very securely . It seems to have the same ball connector. Maybe it would fit together with the handle holder instead of the Window thingy. Just a thought.
Sent from my GT-N7000 using xda premium
If you buy the trident kraken ams case there is a bike clip attatchment accessory you can buy seperately on the website! !
Sent from my SAMSUNG-SGH-I717 using xda premium
Those squeezable mounts suck. Sorry for your loss. I have used these, http://www.ebay.com/itm/Cycling-Bik...962477?pt=PDA_Accessories&hash=item3375756eed. From ebay, and Asia. But they have worked out. You can find different sellers for them.
uztnus said:
Do you have a link for the mount? (and the case)
Thanks
Click to expand...
Click to collapse
The note with a VERY THIN case will fit in this Otterbox. A normal silicon or TPU it wont' fit, or will just barely fit. And remember, you can't interact with the phone in the case! Although with a dremel, you could possibly have a pretty tough case that you could touch though, although it'd obviously be less bomb-proof and you'd have to do something for water resistance. As-is, it's almost bombproof and waterproof.
OtterBox 2000 Series WaterProof Case
http://www.amazon.com/OtterBox-2000-Series-WaterProof-Case/dp/B000EM2O2G
Arkon GN032-AMPS Bicycle and Motorcycle Mount with 4-AMPS Connection Compatible with RAM GPS Holders (Black)
http://www.amazon.com/Arkon-GN032-AMPS-Motorcycle-Connection-Compatible/dp/B003FMUP14
To attach I just templated the holes on the case with the mount, drilled. To maintain water resistance, I put a piece of an old intertube between the mount and the case, just a bit of silicone, and screwed down tight. I've dunked it in in the sink, nothing. The screws on the inside I put duct tape over just in case anything rubs, but I put together a piece of cut-up foam in there to secure the Aria I normally use in the case.
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Here are pics
Sent from my C6833 using xda app-developers app
So you have to put a plate on front and back of your case?
I don't use a case currently. I'm assuming I could just stick one of these pads to the back of the phone?
Are they really secure going over big bumps and stuff like that?
Yeah I put plates on the case because I didn't want to stick anything to the phone. It would obviously be lighter without a case, and thus hold better if you stuck it to the phone. It's been really secure over bumps and at high speeds. Held perfectly during a 7 hr drive last week.
I am using this one.
http://www.ebay.de/itm/281172219396?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
It's the only customfit car holder for the Ultra I could find. When in the car I remove my Ultra from the Nillkin case and put it in the holder. I use it for navigation quite a lot and I hate it when the phone is loose in the car holder which is the case with most universal clamp style holders.
I have the InfiniApps Slyde CD Slot Mount also. Best phone mount ever. CD players are usually in the best location for viewing. I had cup, dash mounts, they were terrible. I used the sticky metal plate and attached it to the back of a case. Also magnetic attachment makes for quick removal of the phone when you want to check a message etc...
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
Hi can you post some pics of it...???
This is the one I got. Worked pretty good until the Z Ultra..
http://www.mountek.com/dp/B004G1L52Q
Cool these look good. Just found another one which is cheaper than the others $12.99 + $2.99 delivery. Looks like it does the same thing and will also fit the Z Ultra (checked the dimensions). Link
Is there any risk that the CD slot ones will damage the CD player? Is the slot strong enough to handle the weight of the Xperia Z Ultra?
I've been using PuGoo sticky pads for a good year or two now to mount whatever smartphone I'm using. It's very handy.
http://www.amazon.com/gp/product/B00F68G58M/ref=olp_product_details?ie=UTF8&me=&seller=
You do need a good spot for it though, which luckily my xB has.
omniphil said:
...., but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
abuihsan said:
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
Click to expand...
Click to collapse
I already have this car holder and it works fine. It keeps the phone firmly in place and it is easy to put in and take out.
cholepuree1 said:
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Click to expand...
Click to collapse
Does it stay in place while driving and when hitting potholes or bumps?
It does hold very strong, I just got one of these. I hate cases on my phone but I put one on so I could attach the metal plate to the inside of the case. It has never fallen off on even the biggest bumps.
I am still deciding if I want to just stick the plate to the back of my phone... I wonder how easy it is to get the adhesive off the back glass if I ever wanted to remove it...
Yes is holds really well. Just had a 6hr drive this morning!
Edit: Here is a picture of how it looks while driving.
Sent from my C6833 using xda app-developers app
Just wanted to say that I just bought this:
Scosche stuckUP
Its early to tell but the quality feels solid compared to the many ebay cheapo one that end up breaking in no time.
The whole things just feel quality..and for the price it better! lol
Several ways to use it...I went with Windshield for now. Holds the phone very tightly and during the trip its very stable.
Also, I did not even have to remove the flip case I have which makes it seem a lot bulkier so I feel it will do great with either the CP12 or any of those battery/case combinations.
Happy to finally have my phone up there even if it blocks most of my view! LOL
I have come to the conclusion that a universal mount for a small tablet is the ideal car mount, so I have been looking at ebay for ones designed for the Nexus 7, Memopad 7 and Samsung Tab 7, and then checking that they can be adjusted small enough for the XZU.
this one in particular looks appropriate:
http://www.ebay.co.uk/itm/160672229905?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
it's a little bit more expensive than I'd expect for a simple product, but I've not seen a similar unit.
The one I bought above works excellent, it is for phones but depends on what you like.
I am very happy with the quality compared to all the crap I bought before lol
I have one of the Imagnet mounts in my F350 I used with another phone. I checked the Z Ultra and it sticks to it without needing the metal plate attached to the back of the phone. Right under the camera area inside the phone is enough metal that the magnet works fine. I have driven with it in that bouncy old truck and it does not come off or move around at all. The only bad thing is the metal is not centered so the phone only sits in portrait orientation. But it beats having to stick a metal plate to the back of the phone.
I like it because I am in and out a lot through the day and it is quick and easy to just toss the phone onto the magnet then just grab it off there when I need it. I have not tried it with a power cable attached but most likely it will just make it tilt over a bit depending on how much the power cable hangs down I guess. With the battery life of this phone it has not been something I have needed compared to the Mega 6.3 that would go dead much quicker streaming slacker radio over bluetooth than this beast of a phone. Most likely the charger cable would have to be supported in some way to keep it from making the phone lean to one side.
For any of you guys that hate regular big car mounts and maybe have gotten creative or found a minimalist product to mount your note 3 in your car, please share! Im talking magnets, clips, adhesive ... anything that doesnt require a huge arm sticking out of your dash.
Im currently on the hunt and the best minimalist solution i can find currently is the tetrax fixway/xway magnets solution.
If anyone has something cooler, please let me know.
Kancerstick said:
For any of you guys that hate regular big car mounts and maybe have gotten creative or found a minimalist product to mount your note 3 in your car, please share! Im talking magnets, clips, adhesive ... anything that doesnt require a huge arm sticking out of your dash.
Im currently on the hunt and the best minimalist solution i can find currently is the tetrax fixway/xway magnets solution.
If anyone has something cooler, please let me know.
Click to expand...
Click to collapse
I can't post links still for some reason (mods?) so do a search for the InfiniApps Slyde on Amazon. Really happy with mine. Just got a second for the wife's GS4 in her car.
YMMV depending on the case you use, the soft-touch stuff doesn't "grip" to the rubber pad quite as well, so keep that in mind.
I went with the Caseology One-Touch. Very stable and sturdy.
Sent from my SM-N900V using Tapatalk
haza12d said:
I went with the Caseology One-Touch. Very stable and sturdy.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Clean. Do you think the arms that hold the phone have enough depth to hold the N3 with a qi charger plate behind it? Maybe another 1/2" or slightly less?
Hmmm... I think so. There's quite a little bit of room but then again I have the Tudia Melody case on my Note. I'm not using that car until tonight, I'll get back to you.
Sent from my SM-N900V using Tapatalk
Did somebody say minimal?
I bought this mount from ebay: http://www.ebay.com/itm/Car-Air-Ven...1564?pt=US_Mounts_Holders&hash=item3f2a732fac
and then I threw away everything but the actual phone holder. I used heavy velcro to attach it to my dash. As you can see in the pictures, I have a hard wired power cord running to it poking out of the dash.
It doesn't budge. I can't picture anything smaller that does not include a part which must go on the phone (like a magnet).
gloster2 said:
Did somebody say minimal?
Click to expand...
Click to collapse
I really would prefer something like this, but need to find the base and arms that will hold the qi behind.
Minimal mounts
My minimalist Note 3 mounts in my two cars, both using a ProClip car specific dash mount, and a pair of ex-hard drive neo-magnets each.
The magnets are held on with 3M acrylic double sided tape, and I put some heat shrink over the magnets on the mount in the Subaru (but I think I'll cut the shrink tape off, I think I prefer the look of the nickel plated magnets in the open as in the Porsche).
On both cars, I have added a hard-wired 5v micro USB charge line installed at the mount, and I've set the 'screen always on when charging'
under the Developer Options menu.
I glued a thin, 1.5" diameter fender washer on the outside of the hard case, under the rubber cover of the Otterbox Defender.
I like this set up because no permanent modifications were made to the cars, and no modifications were made to the phone itself, just the washer glued to the outside of the Defender hard case.
Cheers'
Dan
gloster2 said:
Did somebody say minimal?
I bought this mount from ebay: http://www.ebay.com/itm/Car-Air-Ven...1564?pt=US_Mounts_Holders&hash=item3f2a732fac
and then I threw away everything but the actual phone holder. I used heavy velcro to attach it to my dash. As you can see in the pictures, I have a hard wired power cord running to it poking out of the dash.
It doesn't budge. I can't picture anything smaller that does not include a part which must go on the phone (like a magnet).
Click to expand...
Click to collapse
That ebay one looks good. Do you mind taking a picture along wiht ur Note 3 attached it to your vent, i guess you have directly attached it to your dashboard?
The problem with cd related mounts are 1. they take away the look of your dashboard specially if the interiors of your car is an eye candy *mine is :victory: * 2. On another car forum i read that car mount that attaches to your cd slot can damage the internals if you ever slam your breaks to hard and your car jolts to a stop.
I can sacrifice a vent but cannot place a mount on the top of my dashboard as it looks hideous. Plus i wouldnt want to attach a charging cable to the car mount, i usually keep my phone charged at max most of the times.. thanks to QI technology, plus if et all i need to charge my phone in a car during long drives i will keep a standby cable handy that is removable and attached directly to the phone (like most other mounts do)
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
tdd2 said:
My minimalist Note 3 mounts in my two cars, both using a ProClip car specific dash mount, and a pair of ex-hard drive neo-magnets each.
The magnets are held on with 3M acrylic double sided tape, and I put some heat shrink over the magnets on the mount in the Subaru (but I think I'll cut the shrink tape off, I think I prefer the look of the nickel plated magnets in the open as in the Porsche).
On both cars, I have added a hard-wired 5v micro USB charge line installed at the mount, and I've set the 'screen always on when charging'
under the Developer Options menu.
I glued a thin, 1.5" diameter fender washer on the outside of the hard case, under the rubber cover of the Otterbox Defender.
I like this set up because no permanent modifications were made to the cars, and no modifications were made to the phone itself, just the washer glued to the outside of the Defender hard case.
Cheers'
Dan
Click to expand...
Click to collapse
Dan, can you post links to both the items the mount and the magnet?
I do like the Kenu Airframe Portable Car Vent Mount but they make it for the iphones and most android phones do work wiht it, but not the Note 3.
MANswers said:
Dan, can you post links to both the items the mount and the magnet?
Click to expand...
Click to collapse
The mounts can be found at ProClipUSA.com, the magnets were from old desktop HDD's I had - each drive contains 2 neodymium magnets, and are pretty easy to remove.
Cheers'
Dan
MANswers said:
That ebay one looks good. Do you mind taking a picture along wiht ur Note 3 attached it to your vent, i guess you have directly attached it to your dashboard?
Click to expand...
Click to collapse
I did attach it directly to my dashboard using heavy duty velcro tape. Unfortunately, I threw away the vent mount which came with the phone holder. So I can't take a picture. I did use it for a few days just to see what it was like. It worked well and was reasonably stable. But, I prefer the reduced clutter of just attaching the phone holder to the dash.
tdd2 said:
The mounts can be found at ProClipUSA.com, the magnets were from old desktop HDD's I had - each drive contains 2 neodymium magnets, and are pretty easy to remove.
Cheers'
Dan
Click to expand...
Click to collapse
Thanks i will check that out.. i think i will go with these mods as well..
tdd2 said:
The mounts can be found at ProClipUSA.com, the magnets were from old desktop HDD's I had - each drive contains 2 neodymium magnets, and are pretty easy to remove.
Cheers'
Dan
Click to expand...
Click to collapse
I use a similar setup, but with an iMagnet rig screwed to the proclip mounting plate. Works very well, very clean, and gives you some adjustability on angle.
Sent from my enormous Note 3 via Tapatalk.
MANswers said:
The problem with cd related mounts are 1. they take away the look of your dashboard specially if the interiors of your car is an eye candy *mine is :victory: *
Click to expand...
Click to collapse
What kind of car, and what interior mods have you done? Post a pic of your car's interior.
SwiftKey'ed from my White Sprint Note 3 via XDA Premium
tdd2 said:
My minimalist Note 3 mounts in my two cars, both using a ProClip car specific dash mount, and a pair of ex-hard drive neo-magnets each.
The magnets are held on with 3M acrylic double sided tape, and I put some heat shrink over the magnets on the mount in the Subaru (but I think I'll cut the shrink tape off, I think I prefer the look of the nickel plated magnets in the open as in the Porsche).
On both cars, I have added a hard-wired 5v micro USB charge line installed at the mount, and I've set the 'screen always on when charging'
under the Developer Options menu.
I glued a thin, 1.5" diameter fender washer on the outside of the hard case, under the rubber cover of the Otterbox Defender.
I like this set up because no permanent modifications were made to the cars, and no modifications were made to the phone itself, just the washer glued to the outside of the Defender hard case.
Cheers'
Dan
Click to expand...
Click to collapse
I need some info . . . I've decided, now that I'm using wireless charging, that I want to modify my 2 minimalist car mounts to include QI transmitters . . . I've been to every mobile/electronics/cell phone shop and/or kiosk in my area, and QI stuff around here is non-existent.
I'm looking for the smallest diameter (I prefer to try using a round unit first, oval if needed), as well as thinnest QI transmitter available - that also uses mico-USB for power (I'm already wired up with stable micro-USB 5v sources in both cars). I've done countless searches on Ebay and Amazon, and it appears the thinnest I'll find is around 9-10mm, by roughly 65mm (.35" x 2.5").
I'm kind of hoping I can get info from people who have already bought some of these, before I start buying every 'mini/micro' charger on Ebay and Amazon for comparison as to actual size/quality/other potential issues.
Thanks!
Dan