Hi,
I am using at the moment following ROM:
CE OS 5.2.20755 Build 20755 1c.M2D.2009
cooked by Hoang An,
which I downloaded from this site.
It is fast and working very good EXCEPT:
very once in a while the phone starts suddenly searching for service provider and it stays in this searching state. When I turn off the phone through comm. manager and turn it on - it finds the service provider again.
When I use the same SIM card in another phone - this problem does not come up. So, it is the problem of the phones' hardware or its software.
As I am often on on-call duty, I must be sure that the phone has always found the provider.
That is why I have following questions:
1. Has anybody had this problem?
2. Is this problem specific for this cooked ROM or is it often that something like this happens with Prophet?
3. Does anybody know how to correct this problem?
Thanx for your help.
Pavana
Maybe you need to use a diferent radio?
Can you tell me how to change it?
I am rather new to all this.
Which radio would you recommend and where can I get it?
BTW, thanx for a VERY quick answer.
Pavana
in the wiki you got everything
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_List
Try the last radio If doesnt work, try other
pavana said:
Hi,
I am using at the moment following ROM:
CE OS 5.2.20755 Build 20755 1c.M2D.2009
cooked by Hoang An,
which I downloaded from this site.
It is fast and working very good EXCEPT:
very once in a while the phone starts suddenly searching for service provider and it stays in this searching state. When I turn off the phone through comm. manager and turn it on - it finds the service provider again.
When I use the same SIM card in another phone - this problem does not come up. So, it is the problem of the phones' hardware or its software.
As I am often on on-call duty, I must be sure that the phone has always found the provider.
That is why I have following questions:
1. Has anybody had this problem?
2. Is this problem specific for this cooked ROM or is it often that something like this happens with Prophet?
3. Does anybody know how to correct this problem?
Thanx for your help.
Pavana
Click to expand...
Click to collapse
1. yours should be "1d.M2D.2009", NOT "1c.M2D.2009",
2. you were downloaded the rom from [size=+3]HERE[/size],
3. Why didn't you post your question [size=+3]THERE?[/size]
4. your answer should be [size=+3]THIS ONE[/size],
5. did you say a thank to that thread yet?
6. why didn't you read but start a new thread?
Try it like dioxda said, if it does not work install 2.19 radio rom and you should be fine.
deltav13 said:
Try it like dioxda said, if it does not work install 2.19 radio rom and you should be fine.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
deltav13 said:
Try it like dioxda said, if it does not work install 2.19 radio rom and you should be fine.
Click to expand...
Click to collapse
I had a problem about the phone is not ready and wait 15 sec, like this.
2.19 radio is solved .
Related
Hi all,
giving to the wheels one small GPRS control applet:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tested only on my XDAII PH10 Qtek 2020.
1.60.00 WWE ROM
1.60.21 Extended_ROM
1.06.01 Radio_ROM
Georg
The install file:
The install file:
DIKY
The cab, zip or cpl file
The cab, zip or cpl file is on:
http://www.gb-soft.cz/xdaii
or
http://www.gb-soft.cz/xdaii/GBS-Tweak.cpl
Easy install: copy the GBS-Tweak.cpl to windows dir
I haven't tried this yet, but it looks absolutely superb. Just a little thing - bubble has three b's (bubble not buble).
BB
apatrick said:
I haven't tried this yet, but it looks absolutely superb. Just a little thing - bubble has three b's (bubble not buble).
Click to expand...
Click to collapse
Thank for notice. Already is it redress.
Georg
I have always used this cpl, but recently (after upgrading to W2003SE) once I install this app and reset, it HARD RESETS! I have had this happen twice, (but only realized the possible relation later), and now I'm gun-shy to install it again.
Is anyone running this with the 2.02.t1, 2.06.00 ROMs and are NOT have problems.
I would like to turn off looking for GPRS when radio re-starts, (and just to establish a GPRS signal when you need GPRS), (makes searching for a GSM signal MUCH faster)
Alternately, does anyone know what the registry change is to cause the device to NOT look for a GPRS signal, (just a GSM signal) until needed?
Thanks
I have already used gprs tweak.
I didn't found that problem with hard reset even in 2.02t1 ,2.06 or 2.06 merge with 2.02t1.
Your problem may from other softwares which have conflicts with this program or may problem from ROM2.06
tumtum:
Thanks for replying. I installed the cpl again because of your article, and I'm happy to report its working well, (several resets and no Hard Resets). It must have been something else I was installing in the past as well, that was causing the Hard Reset.
Thanks again...
there is new version support SE ?!?!
No there isn't a new version, but it seems the older 2004.02.04 works with SE. I did NOT use the Media Player setting, but the GPRS seems to work fine. I'm using Radio 1.14.00 (I had radio 1.18.00 before), (in case that could have been a problem)...
http://www.gb-soft.cz/xdaii/product_gprs_tweak_en.htm
Hello ppl. After i upgrade my device to TouchVII i try to change pool with active sync method. After the reset i cant install anything on my device or storage card. Everything else is working. Also i try to downgrade the rom with the official but every time i get error message that it cant find my device. I try 2 pc, but no luck. I also try to reinstall the TouchVII but i get error message "Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync"
Any help here pls
PS:Sry for my poor english
itsutilsdll
Look here : http://forum.xda-developers.com/showthread.php?p=1504383&highlight=itsutils.dll#post1504383
No luck. I think somehow lock the CID . I try some methods found in forum but none working. Everytime i try to install a program on pda i get error" Installation of xxx was unsuccessful"
I also try to downgrade with many roms or upgrade to another rom but same.
I fix it. I SR and get into bootloader. After that i run again the official rom update program and everything work now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i got this problem too.
using gullum touch vii e.g. installation of ringo mobile is unsuccessful.
even after hardreset problem not solved. some cabs still able to install, some cabs not able to install to device, but to storage card
try re-flashing now...
also not working after downgrade and new update to touch vii
i use this installation cab: http://electricpocket.com/RingoMobile.cab
why does that not work :'(
same me I hard reset and follow step by hard reset after finished 1 and 2, it's work
Hello ppl. After i upgrade my device to TouchVII i try to change pool with active sync method. After the reset i cant install anything on my device or storage card. Everything else is working. Also i try to downgrade the rom with the official but every time i get error message that it cant find my device. I try 2 pc, but no luck. I also try to reinstall the TouchVII but i get error message "Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync"
Any help here pls
Click to expand...
Click to collapse
Did you use the pp changer for 6.0.0.0 or 4.0.0.0
Coz, trhis is a problem for changing PP with the wrong fix.
I saw it now. I use the 4.0.0.0 Stupid Here
THANKS rohanmaini for this clue. i used the changepp from transform v1 with the touch vii which i downloaded before (cause i testet transform v1 before). i will try ones more and tell you then. hope this works then
wtf ... that really was my fault all the time. i flashed new pagepool size with the wrong app... strange ..
thanks rohanmaini!
OK people
Because i dont have a lot of time at the moment i release my:
WM6.1 Clean Rom from Emulator
Please post Feedbacks and Problems here. I will show to help you
If you like my work, please donate.. I have worked hard for this. You can contact me per PM.
So i wish you a lot of fun and here the link:
Before update Rom u need update Hard-SPL
UPDATE
Update:
- Restart problem solved (Timeout set on "NEVER")
- GPRS problem solved
Im not responsible if your phone brick and i take no liability.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'lltry It Thanks!
Is a WM6 or WM6.1 in german available ?
Thx
So far works great , fast and stable .
Works Very Well!
Thanks!
EXCEPT THIS : INTERNET EXPLORER SAYS " CANNOT CONNECT. VERIFY YOU HAVE NETWORK COVERAGE AND TRY AGAIN."
same here: great ROM, but seems to have a GPRS problem
vorks very well for me also
Downloading...thanks
My Orange SPV C100 is halted on the splash screen, I'll try to force your ROM from the bootloader and post later
Thanks a lot
Oh! RUU_signed.nbh
How to install this ROM from PC?
Before put...
Hi!
Please, would someone tell me - are the MMS there?
Is it really problem with GPRS? Is it also with MMS sending/recive?
Best greetings,
RA
"RUU_signed.nbh"
Really signed?
RUU_signed is only called the name of the file.. It is not really signed.
For MMS and GPRS i cant test at the moment, but i would what i can do.
Can someone confirm that mms dont works?
Greets
Blackdragon_860 said:
RUU_signed is only called the name of the file.. It is not really signed.
For MMS and GPRS i cant test at the moment, but i would what i can do.
Can someone confirm that mms dont works?
Greets
Click to expand...
Click to collapse
To fix gprs problem add to rom AsyncMac.dll and thid in reg..
Code:
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1]
"Group"="NDIS"
"DisplayName"=mui_sz:"netmui.dll,#9008"
[HKEY_LOCAL_MACHINE\Comm\AsyncMac1\Parms]
"DisablePowerManagement"=dword:1
"BusType"=dword:0
"BusNumber"=dword:0
[HKEY_LOCAL_MACHINE\Comm\AsyncMac]
"ImagePath"="AsyncMac.dll"
"Group"="NDIS"
"DisplayName"=mui_sz:"netmui.dll,#9008"
[HKEY_LOCAL_MACHINE\Comm\AsyncMac\Linkage]
"Route"=multi_sz:"AsyncMac1"
THX very much serrios. I hope it works...
It works on china rom, so i think it wiil work there
Can please someone conferm this..so i would post a update..
How to add asyncmac.dll into ROM
Hi serrrios,
Can you please explain a little more about what you mean when you suggest adding asyncmac.dll.zip into the ROM. Using an NBH editor do we just need to add asyncmac.dll or is it more complicated than that? If so can you please provide some instructions about how to do it?
Thanks,
andrew-in-woking
Posted Update
GPRS problem fixed
Thanks Blackdragon for this great ROM, GPRS and everything else is working now!
SMS problem
I've found another issue with SMS in this ROM. Unable to send SMS. The options for the short message service center are missing so I can' t enter the smsc number manually. Maybe the device tries to send the SMS via GPRS, normally there is an option to define CS or GPRS for SMS, but this option is missing too.
Any idea how to fix that?
Hi All
A Search Orginal ROM for the HTC Monet/Lobster
AnY Ideas
If Help me, then Create New Os for this Device
And even someone here has this device?
Alas I gave mine to my dad two years ago; he still uses it but wouldn't be bothered with a new ROM.
But, I just need the original.
Itself, which gave Virgin Mobile - original
I won't be seeing him for a while, but if it is simple to dump the ROM (it wasn't for my X1), and you give full instructions, I may be able to do it.
I am sure there are others on here that can do it sooner.
ETA: Which ROM do you have on yours?
ROM WM6.5 is some uploaded, but probably without the USPL.
I need original dump to SD card
lobby rom
Hi, all my kids have lobbies and a 6.1 or 6.5 rom with the dab radio would be awesome. If you can tell me how or point me at a how to I'll get it sorted for you..
cheers
I do not know if I understand correctly
You have orginal System (ROM) for Lobster?
Hi,
I have devices I can do a rom dump from if you can tell me how.
As far as I know there is no rom available but I will give virgin a call on monday and see if there is anything I can get...
I am already in touch with Virgin Mobile on the original ROM
I search now, how to backup ROM to SD Card
Sorry, but you must tested metod backup ROM to SD
See this http://www.modaco.com/content/typhoon-variants-typhoon-modaco-com/201334/backup-your-typhoon-rom/ or maybe this http://forum.xda-developers.com/showthread.php?t=235734
Look http://translate.googleusercontent....le.com&usg=ALkJrhhQQrT4EdH_DtjErxDRw28cnbIaZQ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any progress?
Could you clarify why you need it?
From your first post I thought you were a developer going to create a new improved ROM, but is this just for you to fix your lobby?
I'm sure it is just a translational thing, but it's a lot of work to dump a ROM (if you are new to it), so people should know clearly why.
Hopefully someone can help you though.
I create new ROM, but first, I need to BackUp the original ROM from this device.
You understand, my Lobster run only into bootloader.
I must unlock CID in BL
Hi, sorry i didnt get an email notification of your replies,
Will take a look at those pages and have a go over the next day or two.
zarn said:
Hi, sorry i didnt get an email notification of your replies,
Will take a look at those pages and have a go over the next day or two.
Click to expand...
Click to collapse
Ok my friend, thanks
I'll have a go too if you like, and if I can find my Lobster after all these years.
@grayme Funny to have two guys from Hertfordshire on one tiny thread
It would be nice
Do you know how to get it into the bootloader? I've tried some normal combinations but haven't got it so far. After that I'm ready to go
Never mind... Just found it.
Ok, new to HD2, just tried to flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ROM][WWE][--grzegorz10_Dusk_Ultimate_2_v1.20--]
to T-Mobile US HD2 and it wouldnt go past 1%. Errored to recovery. Is it bricked, did I flash a non-compatible Rom?
Is there any way to recover? Tried T29, no go past 0%.
Any help please tia
huggs said:
Ok, new to HD2, just tried to flash
[ROM][WWE][--grzegorz10_Dusk_Ultimate_2_v1.20--]
to T-Mobile US HD2 and it wouldnt go past 1%. Errored to recovery. Is it bricked, did I flash a non-compatible Rom?
Is there any way to recover? Tried T29, no go past 0%.
Any help please tia
Click to expand...
Click to collapse
You must Have HSPL!
- Do a task 29 (not essential, but recommended)
- Flash the 2.10.50.08_2 radio (not essential, but recommended)
- Flash The ROM
- Hard Reset (hold the volume up and down button once the flashing reaches 100%)
- Post your feedback
That's taken from Shu.[OP] that was posted on Cruzer's HD2 ROM. It's what you need to do to flash a ROM. Long as you don't use a .51 radio, you're fine. Example: 2.10.50.08_2 is good for Tmobile USA, but if you had a .51 in the radio, it'd brick your cell. All the basics are covered in the tutorials in the HD2 General forums or just do a search for it. Make sure you do the right HSPL. You can do a search to find that out as well. To get into bootloader, just pull the battery and hold down the bottom part of the volume button and then put the battery back in and turn it on. Hold it till you see the rainbow screen. Dusk is good for TMOUS. I've used it and it's pretty cool.
Think I had wrong radio. Trying to recover now...
huggs said:
Think I had wrong radio. Trying to recover now...
Click to expand...
Click to collapse
Doesn't have to be the one I listed. I use 2.12.50.xx
Dusk Is Compatible with T-Mobile.
To every one that want to know.
Of course Dusk Roms can be used on the T-Mobile US
Reason I am so sure and why veru easy to check is that
all of his Beta Theme has T-Mobile US to flash his test roms
on.
Regards
Obalia73