Hello ppl. After i upgrade my device to TouchVII i try to change pool with active sync method. After the reset i cant install anything on my device or storage card. Everything else is working. Also i try to downgrade the rom with the official but every time i get error message that it cant find my device. I try 2 pc, but no luck. I also try to reinstall the TouchVII but i get error message "Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync"
Any help here pls
PS:Sry for my poor english
itsutilsdll
Look here : http://forum.xda-developers.com/showthread.php?p=1504383&highlight=itsutils.dll#post1504383
No luck. I think somehow lock the CID . I try some methods found in forum but none working. Everytime i try to install a program on pda i get error" Installation of xxx was unsuccessful"
I also try to downgrade with many roms or upgrade to another rom but same.
I fix it. I SR and get into bootloader. After that i run again the official rom update program and everything work now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i got this problem too.
using gullum touch vii e.g. installation of ringo mobile is unsuccessful.
even after hardreset problem not solved. some cabs still able to install, some cabs not able to install to device, but to storage card
try re-flashing now...
also not working after downgrade and new update to touch vii
i use this installation cab: http://electricpocket.com/RingoMobile.cab
why does that not work :'(
same me I hard reset and follow step by hard reset after finished 1 and 2, it's work
Hello ppl. After i upgrade my device to TouchVII i try to change pool with active sync method. After the reset i cant install anything on my device or storage card. Everything else is working. Also i try to downgrade the rom with the official but every time i get error message that it cant find my device. I try 2 pc, but no luck. I also try to reinstall the TouchVII but i get error message "Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync"
Any help here pls
Click to expand...
Click to collapse
Did you use the pp changer for 6.0.0.0 or 4.0.0.0
Coz, trhis is a problem for changing PP with the wrong fix.
I saw it now. I use the 4.0.0.0 Stupid Here
THANKS rohanmaini for this clue. i used the changepp from transform v1 with the touch vii which i downloaded before (cause i testet transform v1 before). i will try ones more and tell you then. hope this works then
wtf ... that really was my fault all the time. i flashed new pagepool size with the wrong app... strange ..
thanks rohanmaini!
Related
Hi,
I am using at the moment following ROM:
CE OS 5.2.20755 Build 20755 1c.M2D.2009
cooked by Hoang An,
which I downloaded from this site.
It is fast and working very good EXCEPT:
very once in a while the phone starts suddenly searching for service provider and it stays in this searching state. When I turn off the phone through comm. manager and turn it on - it finds the service provider again.
When I use the same SIM card in another phone - this problem does not come up. So, it is the problem of the phones' hardware or its software.
As I am often on on-call duty, I must be sure that the phone has always found the provider.
That is why I have following questions:
1. Has anybody had this problem?
2. Is this problem specific for this cooked ROM or is it often that something like this happens with Prophet?
3. Does anybody know how to correct this problem?
Thanx for your help.
Pavana
Maybe you need to use a diferent radio?
Can you tell me how to change it?
I am rather new to all this.
Which radio would you recommend and where can I get it?
BTW, thanx for a VERY quick answer.
Pavana
in the wiki you got everything
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_List
Try the last radio If doesnt work, try other
pavana said:
Hi,
I am using at the moment following ROM:
CE OS 5.2.20755 Build 20755 1c.M2D.2009
cooked by Hoang An,
which I downloaded from this site.
It is fast and working very good EXCEPT:
very once in a while the phone starts suddenly searching for service provider and it stays in this searching state. When I turn off the phone through comm. manager and turn it on - it finds the service provider again.
When I use the same SIM card in another phone - this problem does not come up. So, it is the problem of the phones' hardware or its software.
As I am often on on-call duty, I must be sure that the phone has always found the provider.
That is why I have following questions:
1. Has anybody had this problem?
2. Is this problem specific for this cooked ROM or is it often that something like this happens with Prophet?
3. Does anybody know how to correct this problem?
Thanx for your help.
Pavana
Click to expand...
Click to collapse
1. yours should be "1d.M2D.2009", NOT "1c.M2D.2009",
2. you were downloaded the rom from [size=+3]HERE[/size],
3. Why didn't you post your question [size=+3]THERE?[/size]
4. your answer should be [size=+3]THIS ONE[/size],
5. did you say a thank to that thread yet?
6. why didn't you read but start a new thread?
Try it like dioxda said, if it does not work install 2.19 radio rom and you should be fine.
deltav13 said:
Try it like dioxda said, if it does not work install 2.19 radio rom and you should be fine.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
deltav13 said:
Try it like dioxda said, if it does not work install 2.19 radio rom and you should be fine.
Click to expand...
Click to collapse
I had a problem about the phone is not ready and wait 15 sec, like this.
2.19 radio is solved .
hello,
last night I made mad
impossible to install the rom that of the Medoc and htc new rom
I try on 3 different PCs
the same problems?
After waiting for the bootloader to the 98% I have this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help
boolat said:
hello,
last night I made mad
impossible to install the rom that of the Medoc and htc new rom
I try on 3 different PCs
the same problems?
After waiting for the bootloader to the 98% I have this:
please help
Click to expand...
Click to collapse
Please tell us the complete detals of your operating system and service pack etc.
htc hero
about phone :
model number : htc hero
firmware version : 1.5
baseband version : 63.18.55.06U_6.35.04.25
kernel version : 2.6.27-a5504199 [email protected] "#521
build number : 1.79.428.2.3 146733 cl#49365 release-keys
software version : 1.0.0.A6288
system recovery 2
home+back reboot system now
alt+a apply eny zip from sd
alt+w wipe data/factory reset
alt+b nandroid v2.2 backup
alt+f repair ext filesystems
cyanogenmod V1.4 + JF
thx for help
I buy yesterday htc
The workaround looks like;
Install HTC-sync
Connect the phone with the cable with the pc
Select on the dropdown-screen : sync
Then run the RUU*******.exe on youre PC and follow the steps on youre screen.
same error here , my hero is native i didn't use any custom rom or made on it any changes bought from uk , i'll add details of my device later .
but i tried the following , the error stated that this is a usb connection error so i thought it might be problem with the htc driver so i upgraded the htc-sync application with the one in support site. restarted and tried again . but it didnt work... a new error showed up error 155: unknown error.
same error..any solution?
Reload the drivers in c:\program files\HTC\HTC Drivers\Driver Files\<your os>\ through device manager. Should solve it.
Sent from my HTC Hero using Tapatalk
I am venkatesh, and i am using xperia mini pro, unlocked bootloader..
Today, i got strange problem..
I tried to install custom rom via cwm. It shows some error while installing and not installed any os...Then my sd card was shown error while connecting to laptop, then my card doesn't work properly, it almost in dead condition..
So, i just thought to lock the bootloader for the purpose of flashing ftf original firmware...then the flashtool shows error "ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
I don't know the way to give life to my phone...I can able to change kernal, i tried to restore some os via panic kernal, but SD card not shown..
You don't need to relock bootloader to flash the original ftf. Just try again flashing the firmware ftf. But be sure it is the right one for your device.
If it still doesn't work, check the option "no final verification" when you select the firmware. But be sure it's the right one for your device, or your phone will completely brick!!
Sent from my SK17i running Jelly Bean via CM10
mihahn said:
You don't need to relock bootloader to flash the original ftf. Just try again flashing the firmware ftf. But be sure it is the right one for your device.
If it still doesn't work, check the option "no final verification" when you select the firmware. But be sure it's the right one for your device, or your phone will completely brick!!
Sent from my SK17i running Jelly Bean via CM10
Click to expand...
Click to collapse
Hi, mihahn......
I tried almost many ftf firmwares, all things shows "ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";E RR_DYNAMIC="SIN header verification failed"
What can i do, if the phone is bricked like this....
Now, i tried to flash very old firmware, then the flash tool like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Umm, that error only occurs with the final data verification check turned on. But, in your case that's a preety peculiar bug. Sorry.
prime_225 said:
Umm, that error only occurs with the final data verification check turned on. But, in your case that's a preety peculiar bug. Sorry.
Click to expand...
Click to collapse
hi mihahn and prime_225...
Dudes, my problem is solved now.....I flash successfully....
The main problem is, my 16gb dead while installing custom rom.... so , every thing collapsed, got panic..
I observe that, official sd cards(free 2gb) doesn't show in clock work mode....Now, i got spare of 2gb and installed octane successfully...
Thank you guys....
So guys, Im new in this forum.
And just wanted to mention that Im a noob in programming.
I have a little issue with my phone. It is an iOcean X7 Elite with MT6589 progressor.
After getting bored with stock andriod I wanted to test the MIUI os and flashed it to my phone. It worked fine, but i didn't like the the rom that much and wanted to flash back to stock. I downloaded the stock rom for my Phone and flashed it with SP Flashtool. It finished without any error.
But the won't turn on. It wont even show the bootlogo. My PC does not recognize the Phone as a Phone.It says: Unknown USB device.
I have tried installing the drivers and used several flashtools (i case there is a version out there getting the job done).
Im really frustrated.
Last time I had a simmilar problem my phone showed the bootlogo and got stucked. But i got it to work by flashing. Now I have no idea what to do.
I'm already thankful for your help.
Was the backup your own?
Try to flash only the preloader, then if that goes thru you can do the full restore again... Come to think about it you might need diff drivers, or maybe meta mode (-vol and power)
I'm not at the computer atm sorry I can't be more help
-D
Sent from my STUDIO 5.5 using XDA Free mobile app
Well, it always stopps at this point. No matter what i try to flash.
What are diff drivers?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well it's being recognized so it's not a driver issue.
Is that your backup?
Do you have a backup?
Your not getting any errors?
Sent from my STUDIO 5.5 using XDA Free mobile app
Have no backup.
It just breaks up the process when reaching the 100% of the red bar.
From time to time I get the drivers issue error. Nothing more.
okay guys.
i tried an other stock rom version and now it says:
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
Does anybody know what this means?
Thanks a lot for minding.
I think just do the full flash.
And DO NOT CONNECT your phone until the progress bar have passed the violet colored progress bar.
I just bricked my Nubia N1, by doing a factory reset. Now the phone starts and it asks me to start configuring it, by choosing the language.
The problem is: It does not recognize and touch on the screen, so I can not choose anything and it does not pass from there. I've read on another forum that someone had this same problem.
I tried to use the recovery to flash another room, but the recovery was also reverted back to original, and it only allow me to flash from sd card. But the phone does not have option to insert an sd card.
I tried also to flash another recovery, using the fastboot, but it does not work, because the oem is locked. When I try to unlock it, it says: FAILED.
Does anyone have any idea that would help with this situation?
to resolve
use pc mouse connect to USB TYPE C Converter then put mouse to it. You will use mouse as pointer therefore you can select point click....
i have the same problem
i buy Nubia n1 from aliexpress
NX451J_CNCommon_v1.24
i try to update with : NX541J_Z69_EN_2SXPO1LD00L128
update sttoped on 81%
now the phone work but touch screen not working
i can use the mouse but i can not use mu hand
please help me
camera not working after jun 2017 update
After i installed the update for jun 2017 , the update slows at 81% it reboot. And then i check for camera it says "make sure ur camera is being used by some other app, or reboot. recovery mode , data wipes< flashing from sd card nthng helps
. help me with the solution if u knw any
Camera and flashlight not working
After update my nubia n1 v1.30 Indian version mobile camera not working it shows unfortunately camera not working...plz help to solve the problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Raja1404 said:
After update my nubia n1 v1.30 Indian version mobile camera not working it shows unfortunately camera not working...plz help to solve the problemView attachment 4268166
View attachment 4268167
Click to expand...
Click to collapse
Apply pressure on the back of your, especially on camera portion. Reboot and then try.
It's a hardware issue, where i guess the connectors fell loose.
Hope it helps.
problem with my zte nubia n1
the screen turning off during a call