I just bricked my Nubia N1, by doing a factory reset. Now the phone starts and it asks me to start configuring it, by choosing the language.
The problem is: It does not recognize and touch on the screen, so I can not choose anything and it does not pass from there. I've read on another forum that someone had this same problem.
I tried to use the recovery to flash another room, but the recovery was also reverted back to original, and it only allow me to flash from sd card. But the phone does not have option to insert an sd card.
I tried also to flash another recovery, using the fastboot, but it does not work, because the oem is locked. When I try to unlock it, it says: FAILED.
Does anyone have any idea that would help with this situation?
to resolve
use pc mouse connect to USB TYPE C Converter then put mouse to it. You will use mouse as pointer therefore you can select point click....
i have the same problem
i buy Nubia n1 from aliexpress
NX451J_CNCommon_v1.24
i try to update with : NX541J_Z69_EN_2SXPO1LD00L128
update sttoped on 81%
now the phone work but touch screen not working
i can use the mouse but i can not use mu hand
please help me
camera not working after jun 2017 update
After i installed the update for jun 2017 , the update slows at 81% it reboot. And then i check for camera it says "make sure ur camera is being used by some other app, or reboot. recovery mode , data wipes< flashing from sd card nthng helps
. help me with the solution if u knw any
Camera and flashlight not working
After update my nubia n1 v1.30 Indian version mobile camera not working it shows unfortunately camera not working...plz help to solve the problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Raja1404 said:
After update my nubia n1 v1.30 Indian version mobile camera not working it shows unfortunately camera not working...plz help to solve the problemView attachment 4268166
View attachment 4268167
Click to expand...
Click to collapse
Apply pressure on the back of your, especially on camera portion. Reboot and then try.
It's a hardware issue, where i guess the connectors fell loose.
Hope it helps.
problem with my zte nubia n1
the screen turning off during a call
Related
Hey Guys!
I purchased two android TV boxes few months back. and one box got stuck at the android logo and i flashed it using MATRICOM_MX2_115_FULL_AUG_09_2013.imgc image file, and now it works fine.
The other box just shows a blank screen nothing displays. When i power it on the LED flashed and then nothing else. I tried to flash it but it ddnt work just the black screen.
i took it apart to flash it and this is how it looks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help appreciated guys....
Thanks.
same problem but cant flash
I have the same box, i took it apart to find the reset botton, i couldn't find any. It is stuck on the android logo, how did u manage to flash it. Plz provide ur steps.
afshandc said:
Hey Guys!
I purchased two android TV boxes few months back. and one box got stuck at the android logo and i flashed it using MATRICOM_MX2_115_FULL_AUG_09_2013.imgc image file, and now it works fine.
The other box just shows a blank screen nothing displays. When i power it on the LED flashed and then nothing else. I tried to flash it but it ddnt work just the black screen.
i took it apart to flash it and this is how it looks.
View attachment 2778028 View attachment 2778044
Any help appreciated guys....
Thanks.
Click to expand...
Click to collapse
I also have the same problem with my device. it doesn't have any reset or volume button on it. I posted about my problem here:
http://forum.xda-developers.com/general/xda-assist/android-box-stuck-boot-logo-t3127923
could you please provide the steps you took.
I found a part on PCB board which said recovery so I connected the two pin and I got it into recovery but there is no option there. there is also three holes which says debug but I don't know how to connect it to pc.
I had a same device and using Online Nandroid backup I made a backup of the ROM which gave me boot.img recovery.img and some other files I put them in the SD card and put the device on recovery but nothing starts and there is only an android guy resting with no option and since there is no volume or power button I can't get into any option
thanks
This is also a picture of the board
hello guys
my bro come back and bought me a new Mobile (Huawei Ascend Ascend Y320-U30) and from first open at 30 mints it was fine and fo a phone call on it last for 12 mints .... when i try setup gmail acc and register it ... got froze and not respond to commands :\
at first there is a message said ( Google+ service stopped work) then i realize maybe cuz this cuz the problem and stopped this program , but the problem still exist and try do factory rest and Hard reset ( press power on with volume up) still froze and much more and when froze , Hauwei welcome screen logo showed to try takeover frozing , and now show UI system stopped working ( show sometimes)
my device support Dual SIM , and Android V4.2.2
the grantee outside my resident country and there is a chance to test and try fix it without broke warranty for a month and then i will send back with my bro , anybody have any tool or method to fix that
i am damn frustrated and sad
thx
and now i try connect my device to my computer with USB and now go on and off continues as u see on this pic .... i think internal memory got problem (like there is bad blocks there)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help guys
i found this site do much support for this phone but in Russian ,
http://translate.google.com.eg/tran...da.ru/forum/index.php?showtopic=545804&anno=2
i take a look and try to re flash my stock rom , anybody have tried before + any one got the right instructions??!!
i got a site have firmwares for u30
http://www.huawei-file.com/index.php?dir=/Y_Series/Y320-U30
but i couldnt find my version y320-u30v100r001c328b906
thx
anybody know how to repair internal memory from bad sector??!!
i think i got bad sectors in my device
up
Rohm was installed wrong phone
Now, the phone is a new operating system, but I did touch and the camera and the flash does not work
MT680 S7 G930FD
model rord : Z6U030HA
model:gxq6580_weg_l
More than 20 system experience
All the same problems
Touch inverse
Have you tried the firmware linked in this thread?
http://forum.gsmdevelopers.com/f51/samsung-s7-sm-g930fd-clone-mt-6580-firmware-here-12699/
Once it is flashed you may need to bring back the Samsung logo by rooting the phone and editing /proc/env_logo_id with a hex editor by adding 01 to the file. Save it, then restart the phone immediately for the changes to take effect.
His experience has been an ongoing problem
I don't understand you mate. If the above mentioned ROM doesn't work, you might want to try this ROM I dumped off my phone:
http://www.4shared.com/rar/6mMhYIk5ce/Galaxy_S7_mt6580_Z6U030HA_V105.html
Is there a password
I think the problem in Lisse rom
Deleted because the calibration file
When you attempt to calibrate the Miracle error appears:
* Waiting for USB Port ...
** Set? PreLoader USB VCOM Port (COM5)?
** Please Hold "ON" to connect with the phone ...
** Waiting for USB Port ...
** Set
** Connecting AT Mode
** Test Mode, Reading Information From the Phone ...
>> Completed, but data not Found
No, the ROM isn't password-protected.
Try pressing the reset pin on top of the phone and see what happens when you connect it.
I did not understand the meaning
Try pressing the reset pin on top of the phone and see what happens when you connect it.
There is a small hole at the top of the phone which you can press with a needle. Press it, and see if it works.
blakegriplingph said:
There is a small hole at the top of the phone which you can press with a needle. Press it, and see if it works.
Click to expand...
Click to collapse
Did not benefit a pin button is pressed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think I need me lcd calibration files
Touch from the bottom and right side parked
I have the same problem. Looking for a solution as well.
Morning,so i am going to try yet again for some help here with regards my mom's Nokia 1 device running on Android 10 Go. Since she updated her phone to Android 10,she has had cmstant issues with the phone. Since updating it,her messages app will not switch to dark mode at all,i have tried uninstalling it and replacing it with other versions etc but it never has a dark mode option available in the app at all.
Then her Google Chrome would not update at all. I got that sorted after a lot of trial and error,resetting the phone and so on. Now the phone has issues with her wallpapers resetting to the default wallpaper the whole time at random. She also suddenly has an issue with her camera after the recent camera related update. She can take a photo,but is unable to view it from her camera app after taking the photo. She also is unable to delete the photo after taking it.
So,i am wanting to know if anyone has any idea of how to perform a software repair or maybe a way to re-install Android 10 on her phone other than just doing a factory reset which does'nt fix any of her issues anyway. Please,we just want to get the phone working properly,so if anyone knows how we can do that,it would be appreciated.
Thank you
Just like any MTK phone use spflashtool then flash it
U should check Wich model first
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Hucin44 thank you. Have you tried this with a Nokia 1 or do you know someone that has? I do not want to try this if nobody else has and were successful. Last thing i want is to brick my mom's phone.
U can follow this
Downgrade Nokia 1 TA-1066 from Android 10 Go to Android 8.1 Go
The Nokia 1 recently got the Android 10 update. The update got lot of bugs like SD card losing write permissions, launcher3 not having widgets and shortcuts on top of other bugs in Pie. This has compelled me to look for going back to Android 8.1...
forum.xda-developers.com
It's work for more secure if afraid to brick the phone uncheck preloader in spflashtool
Thank you
Ok, so i got this random Huawei P20Lite right?
Back isnt pealed off, works fine, no damages.
BUT WAIT... About Works Fine... It Wont really boot up into The OS!!!
Somethimes shows this really weired Image when pluged in and charging the phone, or randomly:
A green Screen with a Red Square on Top and a Blue one Down.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not My Picture
It will then boot up and greed you with A:
Again, not my Picture.
Acording to Huawei, You have to Use HiSuite to recover it.
1. Put the Phone into Fast Boot. AND conect to PC
2. Open HiSuite on Your PC and click on Recovery mode or whatever its called.
3. i donk know i forgot.
anyways, i get this nice little message
(In translated, this means That: Your Device doesnt support System Recovery.
Bro wth
Anyways, our phone story doesnt end there...
I tried doing it without the Computer.
using eRecovery!!! not surprising i know...
Still, it was stuck on booting animation trying to enter eRecovery.
According to Huawei, "this message is displayed when a system file is replaced or modified, or the system is manually updated to an unofficial version". They were responding to another user with the same issue as mine.
I think that this is the Issue. Still, the instructions to fix it, dont work. (as tested above.)
Tutorials show the eRecovery method without the PC.
Here are some info i found:
Another Guy having the same issue:
i forgot the link but someone else on XDA Had the same issue.
please help!!!
hello sir did you have any luck resolving this issue (I've purity much looked every were but I had no chance)