hi everybady, i have Vista and herm200, that's brick i try everythink whire here and the herm200 is still brick, pls give me the right way to unbrick with vista. ipl-1.01 spl-1.09, red green blue white-serial/usb, the program mtty is not working ( only com1 and com2 displayed )
thank's
re
it's alive, thank's for help
how did you fix it ?'
how did u fix ur herm i also have thesame problem
Related
Hi guys....
i'm sorry as i need to post a new tread....i have a problem with my orange m3100 when flashing my radio in process to upgrade window mobile 6 lvsw....i did upgrade my other m3100 and it was success...but i dont know why another one failed....now it stuck in tri color mode....i've being reading all the post regarding howto unbrick it but none of it solve my problem....i really hope that somebody could help me....thanks
Symptom
When i reset it still appear to tri color screen....i can read HERM100 with IPL 1.04(in white text) and HERM100 with SPL 2.10 Olipro(in yellow color text....so which one that currently running on pda?
yahoooo......i'm so damn happy reading this forum that guide me to bring my pda live again....tq very much xda developer!!!
..i tried to install new windows..but ..later it just end up leaving in bootloader mode ...i tried hard spl...hard reset...tried unplug usb and battery too ..but neither work....can anyone help me to retain my jamin.....in bootloader mode it shows
IPL 1013.0001
SPL 2.20.0001
and when i do hard spl it shows
IPL 1013.0001
SPL 2.20.0001
GSM 02.47.21..with imate background ..and dont go further..
help please
which Windows Version u flashed? Cause you have a G4 Device. I hope you flashed G4....
i didi g4
ya ..i did G4...
مشكووووووووووووووووووور
try the Prophet Tools Light.
HELLO
i am a new member and sorry for my bad english
my problem that i ve upgrade my hermes and unloked sid ,but i killed my Hermes by trying to fix a "NoGSM error"
now my hermes don t start i can 'thave the boot screen ,only if take the power botton +to access boot screen i traid all solutions but no success
i ve not access to ktl mode;for this resons i supluy your help,i have connet herms and launch device monitoring and officiel rom ,result is attached down,
herm200
IPL 1.04
SPL 2.03
THINKS
Hello STAMBITA, try with mtty for fix problem.
If your OS don't start you try JTAG mode because your Hermes is not super cid (SPL 2.03) for fix problem.
See the post http://forum.xda-developers.com/showthread.php?t=391047&page=17.
Regards
nico
STAMBITA do you have access to a rom provided by your telco? If so try to flash that rom while you're in the bootloader. Since your device isn't supercid it's either that, or JTAG or send it to a repair centre. I'm sorry.
I ve not access to room .with mtty nothing happen nothing .the last solution is to try jtag but is complicate to do.to send for repair centre it cost the price of new one?
When I attach my niki in bootloader mode with my pc and the i try to do hardspl there comes white screen showing a bar 0% but it did not go ahead like other htc it stays on and after some time there come an error 262 saying this
the rom update utility has encountered a communication error during the update process........etc
i also acted step b step on the guidence of this program but in vain so plez help me how can i hard spl my niki to upgrade new rom ......plzzzzzzzzz
Nofear99 said:
When I attach my niki in bootloader mode with my pc and the i try to do hardspl there comes white screen showing a bar 0% but it did not go ahead like other htc it stays on and after some time there come an error 262 saying this
the rom update utility has encountered a communication error during the update process........etc
i also acted step b step on the guidence of this program but in vain so plez help me how can i hard spl my niki to upgrade new rom ......plzzzzzzzzz
Click to expand...
Click to collapse
if u have already spl 1.5 on ur device then,after runing hard spl 1.22,the moment u c the tri colour on ur device,take the data cable off from pc.when u c 'serial' on ur device,insert the cable again.the process will be complete.
regards
thanks to answer but same problem...
deepankerjha said:
if u have already spl 1.5 on ur device then,after runing hard spl 1.22,the moment u c the tri colour on ur device,take the data cable off from pc.when u c 'serial' on ur device,insert the cable again.the process will be complete.
regards
Click to expand...
Click to collapse
i can see on boot loader mode my spl is 1.16.0000
niki200 cpld-4
plzz tell me another solution
i will be thankful to u
Nofear99 said:
i can see on boot loader mode my spl is 1.16.0000
niki200 cpld-4
plzz tell me another solution
i will be thankful to u
Click to expand...
Click to collapse
is ur device sim unlocked?moreover i think u have already hard spl installed on ur device pal.
hi to all,
trying to hard-SPL my htc-hermes (also in V9) doesnt work.
HARD-SPL7 fails getting device informations
and V9 returns an image corruption after loading bar at 100%
....boot loader screen displays:
HERM200
IPL-1.04
HERM200
SPL-2.03
Can you kindly help me?
device is connected via usb to my notebook and Vista with the upgraded drivers for HTC sync
dARN
DARN i got the same problemzzz