hi to all,
trying to hard-SPL my htc-hermes (also in V9) doesnt work.
HARD-SPL7 fails getting device informations
and V9 returns an image corruption after loading bar at 100%
....boot loader screen displays:
HERM200
IPL-1.04
HERM200
SPL-2.03
Can you kindly help me?
device is connected via usb to my notebook and Vista with the upgraded drivers for HTC sync
dARN
DARN i got the same problemzzz
Related
I have SPV M3100,
Always update error [262],
And now it stuck on Boot loader (3 color screen)
Actually i want to upgrade this but i could not, i made reset and all procedure but same,
And now i cant flash this always error [262] and showing me boot loader only,
HERM100
IPL-1.0.1
HEMR
SPL-1.40.01ipro
Please help me,
I would suggest reading this http://forum.xda-developers.com/showthread.php?t=296722
It was amazing help for me.
During th eflash of my rom radio with 1.54.00.10 the program stopped and my mobile restart in bootloader.
The problem is that the flash program doesn't want to restart flashing and my mobile stay on bootloader menu.
HELPPPPP Please..
What do you mean by "the flash program doesn't want to restart flashing"
Did you try to flash your original shipped ROM entirely to the device?
What is IPL/SPL on your device?
Sorry for my english...
I flashed with RUUWrapper.exe on my PC with usb connection but during the verification the soft said me error 260 the device not connect.
Is there a possibility to flash the rom radio without PC, directly on my mobile ?
Thanks
on the bootloader screen :
HERM200
IPL-1.04
HERM200
SPL-2.03
Looks like the FLASHING TOOL is not compatible to your device! What OPERATING SYSTEM are you using?
I am not sure if your device is already CID unlocked?
If you run on XP and your device is CID unlocked use the CustomRUU (search the forum), if not: read the WIKI!
My device is unlocked and I use wwindows XP
How can I flash with serial?
this is what you get for not flashing Hard-SPL. idiot
I'm ok but how can I do?
please...
HELLLP (ive been upgrading since the xda II) and i recently got a tmobile hermes with wm5! then got wm6 upgraded it and got to about 78% and my pc died and then i tryed recovery did not work had to go to work so i left it! got back and ive tryed so many more upgrades of the image with no luck its stuck on splash screen! ive placed it into bootloader mode then ran ruu wrapper and it gets to the bit of updrading (25mins and a progress bar) and the phone goes white with upgrading image 0% then on the pc i get error 262!! and thats as far as i got please can some1 help thankyou so much
here is all my information that ive got!
bootloader mode = herm300 IPL -1.01 (in white text)
Herm300 SPL - 1.04 (yellow text)
when i restart the phone and its stuck on bootloader mode this is the info
m 05 - r 1.05.05.00
s 04 g 32.36.7010.04h
b 06 d 3.62
please can u ask as many people as you can ive known about this since the xda II days but never needed help and i know some1 can help this is a great website and forum thanks
Hey friens and developers,
I have read the information in post " dead hermes? corrupted radio? Post comments here" and follow the instruction "Device is stuck in bootloader mode".
My problem is, I can´t get a connection to my device (mtty), I have on 4 different PCs (XP or Vista Operation System) every time the same information --> "USB Port can´t not open".
My Question is, is the Bootloader damage ?
History:
The hermes are function well and I get yesterday a problem with frozen the Device. I solve the problem and do a hard reset, but after Installation the Device boot and stay now in the HTC Screen. (Look attachment). If i hardreset the device a see the tri-color Boot-Picture for a 0,5 sec, but no numbers.
THX for some idea´s
Thomas
Did you read the Wiki page for unbricking the Hermes?
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Yes I do, but I have the Problem with the USB Connection (mtty). You have any Idea for the USB Problem?
The Hermes now is function with USB. I install a new XP with SP2 on my PC and I have a connection.
Now I see the BOOTLOADER
HERM200
IPL-1.04
Herm200
SPL 2.-03
I want to flash the Device, but every Solution STOPT by 1%, "the image file is corrupted". Any Idea how to change the Bootloader to a compatibility Bootloader over mtty?
What ROM you trying to flash? It has to be a Hermes ROM or you're gonna end up with a permanent brick.
Have you installed Hard SPL V7? If you have you can use the sd card method to install the ROM.
If its a Hermes ROM and you keep getting the "the image file is corrupted" message, good, it means you won't have a brick at the end as the file is corrupted and could result in a brick. Either download the ROM image again or download something else. That error message is there to save your Hermes from brickage.
Cheers...
I want to help someone on this please , bcs HTC SPV M3100 when i'm trying to switch on phone was stuck on HTC logo and nothing more , i have try to put on boatloader mode and phone was going on bootloader mode three color screen and show this:
HERM100
IPL-1.04
HERM100
SPL-2.03
i'm trying with hard spl from Pof soft but error getting.
Can someone find a time to help me?
hallooo
experts please!
Hello haveri,
what ROM are you trying to start? I was stuck on HTC logo too, when I tried to start a ROM without installing Striped ROM first, which was highly needed. So I done hard reset(three color screen), and flashed again.
For starters, put in bootloader, connect to PC (1st untick "Allow USB Connections" in activesync) and run Hard SPL V7. Install it on your Herms and hope it works because otherwise you are in for a whole heap of hairpulling frustration...
If you get Hard SPL onto your Hermes then use the sd card method to flash a new rom...
You could have avoided this by doing a little research instead of going full pelt into flashing, you Hard SPL BEFORE you get into trouble, NOT AFTER....
Hi guys,
I have a similar problem with a T-Mobile branded TyTn from a friend of mine who thought flashing ROMs without putting device into HardSPL would be clever.
The devices has also IPL-1.04 and SPL-2.03 and from the bootscreen it looks like WM5 should have been installed. I also get the "NO GSM" message and I REALLY tried every fking method but without success.
I even created a Goldcard (and verified on another device it's working, level 0 instead FF) and tried to flash several ROMs (also Cingular WM5 ROM and original german T-Mobile ROM) but no luck.
I also tried to run HardSPL V7 but as far as I remember it just said it cannot connect.
Funny thing: HardSPL V9 DOES start flashing and on the PDA and the PC the bar shows 100% but some moments later it says "Could not update" (or something like that).
I even tried different mtty methods from several posts from the forum (erasing the NAND on different ways, qtek loader method with erasing the first blocks) but I'm really really frustrated now and I believe there is no solution here?! (device has no guarentee)
So, if someone has ANY hint or useful information write it down or send me a PM.
I gladly appreciate your help and hope for a solution!
Cheers
P.S.: I couldn't find any information saying Goldcard method works (or even exists) for Hermes. Can someone confirm it does really work?
Im trying to flash hard spl v7 on my at&t 8525 and every time i flash it goes to the color screen and it says usb, ive done all the steps from the htc guide and still no juice
i hear the windows sound make a disconnect and connect sound but i get a usb error can any one help - the phones current spl is SPL-2.03 and IPL is 1.04
can any one help plz just got the phone today and have never flashed anything on it
My PC's os is Vista Home Premuim 32 bit
Use XP with netframeworks 3.5 on it if it wont works search for the method to upgrade the HSPL v7 for olipro or pof in the SD card method