Related
My Mobile Screen is blank and is not turning on. It happened by it self, I was not upgrading nor charging. Only thinking I can tell is that when ever I'm charging it is showing RED light instead of Yellow. If I remove the battery and put it on cardle to charge, cardle will show that the battery is Full by GREEN Light.
I hope it can be fixed. Would appreciate if some one can help me ASAP.
Thankx in advance
try softreset
try hardreset
try leaving the batt out for a long time
I tried all that but still same. Neither Soft nor Hard reset or taking the battery out. Nothing on the screen, its blank.
Unfortunely i having the same problem, i suspect the backup battery problem ....
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
jspasatc said:
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
Click to expand...
Click to collapse
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?[/quote]
I sent my hima to a service repair center to check the soldering on the mainboard. It's not an authorized repair center, as there's none in Macedonia, it's a place for repairing digital cameras and stuff. It's the place where they changed my bottom connector few months ago, so I thought that the problem might be in the connector soldering (something loossened or something) but , I was told yesterday that the hardware seems ok and there's no problem whatsoever with the connectors and the m/b. This is how it all started:
My problem started a week after I upgraded to tofclock's 2k5 2.01wwe, and after altering the shell.exe file and the registry in order to get the clock shown in the title bar instead of the battery indicator. So after couple of days enjoying the 2k5, one morning my phone turned off, and I couldn't power it. I tried soft reset, tried hard reset, nothing. So I thought I should reflash it, but I couldn't enter b/l mode. I try leaving the battery out for some time (couple of hours) and when I place it back, the screen turns on, just a plain white light for about 15 seconds, and then turns off again. If I try hard reset, the screen lights up again (white screen, no image or anything) and after 15 seconds turns off and so on. I noticed that when the screen lights up after hard reset, if I place the hima in the cradle, the white screen stays on for 3 minutes, and this was exactly my settings in the power management(15seconds on battery, 3 mins on craddle), and the led light in the upper right corner is yellow, and after some time, it turns to green, as in battery charged. Active sync doesn't recognize the phone, I can't get serial screen, and nothing other than what I described in this post. I've tried hundreds of times the entire procedure, but nothing still.
Any ideas. Thanks,
J.
Latest news:
After many attempts to enter b/l, I wasn't successful. Now I placed the device in the cradle, the screen turned white as usual, the amber light turned on, and I received a message in the system tray in my pc the a new hardware was detected, and that XP is instaling..... After that, I received a message that the new device is Windows based Mobile Device.
And then, xp created a new LAN, but , it shows a limited or no connectivity.
why is this happening? And what is happening?
the pda show up as shuch if it's ready to receive a rom from the rom upgrade
But still, when I start himaupgradeut_noid.exe I get error 101, connection error
Note that I only get ehite blank screen, and not serial v1.06/usb v1.06, like I had before my last upgrade to 2k5. perhaps the b/l is corrupted or something?
cheers,
J.
hi guys,
Is this the backup battery we need:
http://www.ipaqrepair.co.uk/view_product.php?product=375
Please advise,
10x,
Jordan.
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
alikhan321 said:
man i am stuckin th whitescreen softspl my phone is on in the background i e i can hear things going on i can alsossyncwith it but i cannot sync via usb just ira what can i do, why can i not syncwith usb ,i cannot sync now cause i cant see screen to activate sync help how to get out of white screen :
Click to expand...
Click to collapse
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
the-equinoxe said:
on the right side of your device is a little hole.
Your stylus has a pointy end.
Put the pointy end of your stylus into the hole, press softly untill you feel a "click".
Behold, the device reboots.
For future references, its called Resetting a device..
Click to expand...
Click to collapse
LOL nice one Eqx
duh
i done that it dont work man i need exprt advice help
alikhan321 said:
i done that it dont work man i need exprt advice help
Click to expand...
Click to collapse
Soft SPL is put to MEMORY, it's not FLASHED.
Rebooting the device will clear the memory.
Thus removing the sSPL.
Try pulling your battery for a few minutes.
Then put it back again and boot the device.
HELP
I Took Out The Battery For 1hr Still The White Screen,help
Took Out Sd Card Took Out Sim ???????????
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
dferreira said:
Press and hold the top left and right sided buttons (Comm + Talk) and hit the reset switch. The screen should turn black, and a request to do a hard format will appear. Press the call button. That should do it
Click to expand...
Click to collapse
That is the exact same advice I PM-ed him.
yes done all that nothing yet just some white screen always on can hear background noices of the phone ,the leds working like normal
please help i love my wizard its been 3 days now my coldrx turkey is very hard now
That's odd... if he can hear the phone start menu going on... maybe you can do it again (use sSPL to flash another ROM). Maybe that will work?
Could it have something to do with DROPPING HIS PHONE instead of the sSPL?
Because the sSPL isn't flashed as I said many times before, it is in MEMORY, not flash..
new screen
i put the new screen in same white screen tested the screen in mda(pic inclosed) so nothing to do with screen
any more ideas
the screen is fine howcan i switch white screen off
to any one who can help
the more you know.....http://www.mdatweak.com/downloads/Wizard_Service_Manual.pdf
make hard reset and then
contecet with ubs and use the SPL again.
its happend to me and i did what i wrote and its worked....
I'm in the same boat! My Wizard is in the stuck white screem as well.
Zpyro said:
I'm in the same boat! My Wizard is in the stuck white screem as well.
Click to expand...
Click to collapse
could you give us more details?
-device (G3/G4)
-what you did (exactly) before you got this white screen.
It is a 8125 (G4) that is unlocked.
I created a ROM from one of the kitchens, and flashed it ... White Screen.
WOO HOO!!! GOT IT!!!
Steps to recovery:
1. Fully charge your phone (VIA Power Cord ... NOT USB)
2. Get the phone to bootloader (three color mode) - by soft resetting and holding the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Download your providers ROM (The "real" rom provided by Cingular/ATT). You can get the one for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
5. Stop ActiveSync (from Task Manager)
6. Run the program downloaded in step 4. This will reflash your phone with the ROM. This seems to be the ONLY WAY possible to reload a ROM from BootLoader.
Enjoy!
Hello,
now I use WM6 for a long time, but i have a big problem, the device lock.
With older builds of WM6 de device is after reset(but not every) locked and the unlock code didn't work.
so my question ist, is this problem now fixed in the new builds? I don't want to test because evertime my data deleted without a backup^^
if the problem isn't fixed, is there any alternative?!
i want to use the device lock because of the security, but wm5 isn't an alternative^^
(who have once run wm6 on his prophet, don't want to miss it^^)
i have used the search button but with no result..
thx 4 answer
Eckki
I've never had that problem. I've been using later ROM versions.
after i enter the lock code the screen makes an irritating blink then its shows the today screen, there is no problem with wm5, can this blinking problem be resolved?
Have you tried a different ROM?
all wm6 rom do the same thing, after u set a lock key, press power off to turn backlight off, then press the power button again to turn on the backlight and there's an irritating blinking of the screen try it yourself
It use to happen on my Orange WM5 ROM aswell... I'd ask a cooker to see if there's anything that can be changed...
Hi I have a htc hd2 that when I try and load it I get a plain white screen,it doesnt have htc on the screen at all its just plain white and when I try to hold the power to put it off it wont switch off,I have to pull the battery.
However when I press down and power it takes me to a screen with red green and blue and white,the white part says serial until I plug it into usb then it comes up usb.
The red part says PB81100 HX-BC
SPL-1. 42. 0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
I have done nothing to the phone and dont understand y it has went white screen all of a sudden,when I try and load it up with windows mobile center it says not connected although it is.
I got the phone just under a week ago from someone and it has been fine until this started.Any help anyone can give will be appreciated,thnx for ur time in reading this
White screen
Hi, I have just had the same white screen problem whilst trying to upgrade to win7 or Android.
I fixed the white screen by downloading the latest upgrade rom file onto my pc from the htc site. Then I got into the bootloader screen on my phone by holding the volume down button while restarting the phone. The phone was then conected to pc and installed the standard rom and the phhone rebooted back to normal.
Hope this helps you.
Hi Little,
Have you solve your HTC HD2 problem? I have the same problem right now. Can you tell me please what you did if you had solve the problem.
Thank you...
Hope to hear from you soon.....
Thes
htd hd2 white screen
ateth2004 said:
Hi Little,
Have you solve your HTC HD2 problem? I have the same problem right now. Can you tell me please what you did if you had solve the problem.
Thank you...
Hope to hear from you soon.....
Thes
Click to expand...
Click to collapse
I tried to restore the original rom by putting the leoimg.nbh file on the sd card and reboot to tricolor. Upon loading from the tricolor, an error message of either 'not allow' or some numeric code appear before the screen goes blank white again. Any help will be appreciated.
P.S. I was running android until a day when the screen turned white suddenly.
Hello, I have a problem with my Sk17i, the screen is not working, I do not know if it is hardware problem or system problem, pressing the power button the phone vibrates, lights up the screen but does not give image, is charging also normally, turns the Flash light when charging, but there is no picture, stay in black screen, when I press the home button the screen turns on but no image, a technician in support told me it was something like the problem of the motherboard for upgrade to ICS (but it was ICS from three months ago), so I think that's not the problem, any suggestions of what could be or a possible solution
I really are appreciate your help.
Pd.- sorry for the bad english, is a traduction from google xD
Pd2.- the phone have Lock bootloader
Androidx10rky said:
Hello, I have a problem with my Sk17i, the screen is not working, I do not know if it is hardware problem or system problem, pressing the power button the phone vibrates, lights up the screen but does not give image, is charging also normally, turns the Flash light when charging, but there is no picture, stay in black screen, when I press the home button the screen turns on but no image, a technician in support told me it was something like the problem of the motherboard for upgrade to ICS (but it was ICS from three months ago), so I think that's not the problem, any suggestions of what could be or a possible solution
I really are appreciate your help.
Pd.- sorry for the bad english, is a traduction from google xD
Pd2.- the phone have Lock bootloader
Click to expand...
Click to collapse
You couldn't have done any fatal damage since you still have locked BL (except probably hardware-based).
Why not try repairing with SEUS (Sony Ericsson update service) or PC companion?
Androidx10rky said:
Hello, I have a problem with my Sk17i, the screen is not working, I do not know if it is hardware problem or system problem, pressing the power button the phone vibrates, lights up the screen but does not give image, is charging also normally, turns the Flash light when charging, but there is no picture, stay in black screen, when I press the home button the screen turns on but no image, a technician in support told me it was something like the problem of the motherboard for upgrade to ICS (but it was ICS from three months ago), so I think that's not the problem, any suggestions of what could be or a possible solution
I really are appreciate your help.
Pd.- sorry for the bad english, is a traduction from google xD
Pd2.- the phone have Lock bootloader
Click to expand...
Click to collapse
Do a repair using Sony update service (SUS).You will get it on sony's official site.
Hi
Connect your phone to PC, start adb and with catlog see what happens in your boot.