Related
HELLO my friends!
Can you help me to revive my qtek 9100 whit Jtag interface.
I need testpoins for Jtag of G4 mainboard (TDO,TDI,TMS,TCK...)
Thanks in advance for ALL!!!
To the best of my knowledge nobody has revived their wizard using JTAG contacts. It might be a myth, or just unproven yet.
Wizard jtag Done yeeeeehaaa!
ok i made it happen n have done that successfully
i made a mistake of doing hard spl thing before downgrading to t mobile custom rom, first it was stuck on splash screen n than was totally dead after resetting
i searched n found the procedure of jtag it n bring back to life, im very happy i did it with slight modifications according to my logic n made it till bootloader, much thanks to all who left so many ideas and materials at different places. ok now my problem is that it does the whole flashing but after that it gets back to boot loader with the same incorrect ipl spl
i guess ill be needing a monster pack with ipl spl included i tried ruu mun otherwise the nb sawith the custom gave invalid tool msg. any ideas guys?
fsl13 said:
ok i made it happen n have done that successfully
i made a mistake of doing hard spl thing before downgrading to t mobile custom rom, first it was stuck on splash screen n than was totally dead after resetting
i searched n found the procedure of jtag it n bring back to life, im very happy i did it with slight modifications according to my logic n made it till bootloader, much thanks to all who left so many ideas and materials at different places. ok now my problem is that it does the whole flashing but after that it gets back to boot loader with the same incorrect ipl spl
i guess ill be needing a monster pack with ipl spl included i tried ruu mun otherwise the nb sawith the custom gave invalid tool msg. any ideas guys?
Click to expand...
Click to collapse
HEY lissten HOW DID U GET THE places where to solder the JTAG cables to motherboard ? please answere
Wizard jtag test points
I found this on another site, hope it is some help.
I am extremely sorry that ihave been away and couldnt respond
Ok im all ears and here to help you till you make it to the end
now tell me your actuall status and what you need
i luckily have all the files needed to jtag but
right these unfortunately i have a very bad internet connection
PM me and we ll take it from there
dont worry i am with you now
Mr FSL13
Can you please come to PM or IM
i have also a one WIZA200 Dead while Update
and i need to JTAG it
its very urgent
can you please help me in this problem?
Thanks in Advance
[hello
thank you , i woulid if you cna help me to make the same , means jtag for my htc wizard i did the same mistake , is dead now, , thank you
souriant said:
[hello
thank you , i woulid if you cna help me to make the same , means jtag for my htc wizard i did the same mistake , is dead now, , thank you
Click to expand...
Click to collapse
RIFF JTAG Wizard look at http://www.jtagbox.com/tag/security-features/
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
hamed_ppc said:
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
Click to expand...
Click to collapse
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
eraserbabyboy said:
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
Click to expand...
Click to collapse
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
hamed_ppc said:
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
Click to expand...
Click to collapse
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
eraserbabyboy said:
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
Click to expand...
Click to collapse
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
hamed_ppc said:
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
Click to expand...
Click to collapse
I don't know. In my country I have a htc services and they say to me that my motherboard must be replaced because is to hard to change only radio chip and they only change all motherboard. For 350 Eur(+some Eur) I can by new Tytn. Now I use my pda in my home (in toalet) via wireles to look internet. Work's fine, but sometimes freeze OS and I must do soft reset.
ok guys , i might found a temp solution or maybe it will work permenantely with some one , but i need some one who have spare time and steel nerves coz i'm sick and tired of trying many files and roms and radios .
so any one is willing to start this experiment with his hermes and his spare-time lets begin .
first of all i want to declare that this method revived my radio and i used my device for one day just fine receiving and making calls . then the next day i decided to make a hard reset to see if the radio will stay working , and the result was the radio was dead .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
feedback
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
a-h-t1,
thx for your discription,I'll try your method as soon as i can(because ADSL isn't much available!!)
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???[/QUOTE]
Hamed I dont know what's happened with my hermes, because I get him with the no gsm error. I have a bootloader 1.09 with enable kitl mode. In PB I lose many, many night to boot os but without sucess. And post many question here, but without answer, a-h-t1 is the first men who try to help and meny 10x for that.
So, before 2 week I send my hermes to Imei-check and before few days I get it back with bootloader 1.01 mfg and instruction from imei teamroblem_Description: The radio chip is faulty 100%. Now the handset is usable as PDA only (wifi + bluetooth working too), but not as a phone (the GSM module refuse to answer/flash).
DO NOT attempt to upgrade the firmware in the phone with a firmware which has RADIO upgrade, as it will put the handset back to the brick mode!!!
Model is SVP3100.[/COLOR][/COLOR]
After that I put the SPL 2.30 Olipro to prevent any future damage, and continuing to "play" and experiment, because I don't have more than, to loose. I have P3300 who work's very nice....
It's possible to boot any OS without radio. (I use nbh tool 1.01 to extract nbh file to nb and after make Ruu_signed but without radio).Also try metod via SD card and same to you, stop when try to flash radio. Also it's happened on 12-13%(independed of the rom version) when start full RUU upgrade. And when try to flashing only radio they stop on 0%. On 12-13% ruu upgrade try to flash radio in this moment, and this is the end. I am not sure is this hardware problems, but imei (I dont belived too much) said YES. In win OS I don't have a imei identification (in device info/identity) and of course radio version is blank. Sometimes happened that os blocked(freeze) or device just totaly go to power off mode and I must to do soft reset. Is any way to totaly disabled phone function in registry? I mean that freeze when phone try to find network or sim, but I am not shure. Last night I open my devices, and get out motherboard, just to see this famously radio chip. It's not possible in "home made" to change yourself this chip. Only if I have a more lucky and found some broken hermes with ok motherboard for 100-150 eur...
I hope that my info just little help to you to know "mystery" about our problems.
And one more time 10x to a-h-t1!
eraserbabyboy said:
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
Click to expand...
Click to collapse
I just tried it and same result like you
but many thx for a-h-t1 and eraserbabyboy's help.now I want to try fix it in hardware way!!
but if anyone has idea about our problem please say here.i think it's going to be common problem,because i see many people in xda who has the same problem.
Read this, to see how I solve my problem. But I still have a hope, that it's not hardware problem and in the future I hope that someone will found software key to solve our corrupted radio.
http://forum.xda-developers.com/showthread.php?t=338413
ok,i think it was almost three months ago that i had posted my last post!!
you know my problem and i feel it has became a common problem for poeple who have hermes,unfortunately.
last week,i found a service man who believed that my phone's problem is fixable.
so i gave my pda to him,and because he lives in another city,i returned to mine and waited for him.
yesterday i phoned him,and this is what he said to me:
"first,I tried software methods,but the result was nothing!then I disassembled the device and changed the piece of RF of your ppc.it hung first,but now it loads the windows and find the antenna too!!but immediatly after finding,it hangs."
he has used the Dopod's RF in my htc TyTN and thinks that this problem(hanging after finding the antenna) is because of not matched radiorom.
I have good feel about his say,and i'm trying to help him find the correct radio rom,because he is so busy and cant search the internet to find the radiorom.so I've mailed him the link of wiki's radio rom for hermes and I hope someday this tragedy will finish but i'm not sure.
if anyone have comment about this case please help us,specialy about the RF,because I don't know anything about the Radio Frequency.
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
1a
Its called a 1a brick. Look in the sticky brick section. like 170+ pages of this issue. I believe I have the same device. No GSM/ no imei no radio. Can flash rom's all day long, as long as rom doesnt include GSM. Try to flash ANY GSM does nothing, let it sit 10hrs... Nice free PDA, till i can figure out the wiki & there must be hope for me. Till then my wiz100 keeps rocking. Like the 8525, but wanted it more as a phone then just pda.
nicknowsky said:
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
Click to expand...
Click to collapse
I hope you will fix your device,but when I read about your solution,I felt that guy who brought back to life your device,has just used a ROM whitout GSM,the way that we have been using since months ago.if I'm in mistake so tell us more.
The end of the Tragedy
o0o0k!!
as I've said in my post,the service man that I love! replaced the RF of my pda,but new problem was hanging after finding the antena!!
as he told me yesterday,he tried another used RF,but this time the TyTN's one and it worked) and there is no problem.so after 4 months nearly I can use my pda.
as soon as I can,I will go to get my device and test it myself.
be wait for my smooth experience!!
What is this???
replaced the RF of my pda
Andrey_ORIN said:
What is this???
replaced the RF of my pda
Click to expand...
Click to collapse
its full name is RFSP=Radio Frequency Signal Processor.it's one of ICs on your Hermes mainboard.it needs a professional to replace.I'll explain more early.
but if you have same problem and have tried all of the the wiki methods then you can test my solution.
UnBrick the Bricked Hermes with "SPL 2.03 - IPL 1.04 - NO GSM - KITL Disabled"
There are many people have this kind of brick but still no solution for it.
I want to ask the mods to make this thread sticky so if anyone find a sulotion for this type of brick would post it Here.
Summary :
IPL: 1.04
SPL: 2.03
CID: NO CID (Request timeout on mtty.exe)
NO GSM
KITL Disabled
I have tested all the possible sulotions available in the wiki but none of the could help me unbrick my hermes.
P.S. : Please just post your sulotions here NOT your comments like "you should superCID your device first", "It's your fault to use telstra wm6",....
Has anyone found a sulotion for this???
You Pm-ed me asking what to do and i pointed you in the correct direction so why have you started this thread?!
Hermes Unbricking Thread
and
Wiki page: How to unbrick your bricked hermes
EVERYTHING you need is there, you just have to read.
Maybe You do not read my Pm!
I have read all the wiki and thread concerning my problem several times!
The simple truth is that some phones are unrecoverable and have to be sent off for repair. Yours is one of these situations and I very much doubt that this will change. More and more of the pioneering technical guys will have updated their Hermes to another phone and the much admired POF has not been seen since he was accused of stealing...
The tacit feeling is that there is enough information and utilities to prevent people bricking their phones (i.e HardSPL and Update from MicroSD card) so if you do find yourself in this unfortunate position and can not recover your phone then you have to bite the bullet, and be better informed the next time.
POF accused of stealing !!!!????
What's that all about?
I dunno if I have a the same problem, but a similar issue, and trust me I am "PC guys, AMD fanboy, A+ tech:"whatever you wanna call i, I am expanding my horizons and I got into the mobile PC world. Trust me I am NOT Google lazy, i have read and read and read and researched and cross-checked and tried literally everything. I am stuck, I know what is wrong with my Hermes, I know where it messes up, and I DO see threads in other sites with 99.9% the same problem I have and I see NO soultion or anyone who knows or Really wants to help, I feel for Koorosh we need help, I have come to terms if have to send it away to repair. That bugs me I got it Literally 3 days ago, and ONLY used the OFFICAL AT&T WM6 Rom to upgrade
on my bootloader all I see is this........
IPL: 1.04
SPL: 2.03
I have too see in my display
IPL: 1.04
SPL: 2.03
when i can flash radio 1% and restart device!
try it
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
this will not work in this site again no solution for bricked spl2.03 cid locked
biswajitghosh said:
i also had the same problem.i have resolved using rom update through memory card.look for it in wike section.all the best.try it with original rom that came with the phone.
Click to expand...
Click to collapse
Do you know to read micro sd flash not work when device is not superCID!!!
I maybe have the same issue.
From the HTC ROM I flashed my device to Shannix Grass rom, a few days later I flashed to Satin Black rom, so far so good. After that I want to flash back to Shannix Grass and my deviced crashed. While booting he stuck at the HTC screen.
I tried to hard reset, flash another rom (stuck and reset at 1%), flash the bootloader (stuck and reset at 7%). After the failed ROM flashing I get error 270 image is corrupted.
In mtty I tried to format the NAND, and tried the erase command, nothing worked.
How can I diagnose the problem further. Is it possible to see why the ROM update failed or why the OS won't boot? I did some monitoring with USB monitor but I didn't get results where I get some conclusions of.
---
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
(My device is Herm200)
wow , i have the problem too. i almost live in phoneless .
.
SOLVED !!!!!!!! my phone now works
If your device became inoperable like mine, because i had a failed ROM upgrade,and the device failed to power up i have good news for ya.
MY DEVICE info is as below.
Problem:
Phone does not boot up, and looks like a red brick.
IPL: 1.04
SPL: 2.03
(it always gave an error 206 at 1% of any ROM update i tried)
Solution:
I downloaded the official WM6 ROM from the HTC's website below,
http://www.america.htc.com/support/8525/software-downloads.html
Then reset my device to the bootloader screen.
(holding the 'ok' button and the 'power' button and then using my stylus to push the 'reset' button close to the USB port.
i then disconnect the USB cable from my phone, and the display showed 'serial'.
i then ran the downloaded file, and waited till the collecting information from phone window came up, then i connected the usb cable back to the phone.
it connected, and VOALLA!!!... it started the update.
at least its better to have a working phone(without all the custom stuff), than none.
I hope this was not booring( with all the detail and all), but i hope it will help anyone out there who's device wont bootup.
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Um.... i cant say for sure
weyun0513 said:
wow , congraution!
i will take the method. but i wonder should i have to get the "connecting time" in the right point, or the computer can't find my phone??
( hope u know what i mean?)
Click to expand...
Click to collapse
Well.. i can't say you should wait 1 or 2 seconds, but just plug it in as soon as you get that screen. i hope it works for you tooo.
what was ur exact situation beforeu can unbrick ur phone???
IPL?
SPL?
KITL??
NO GSM ERROR?
what was the rom that has bricked ur device??
where did it stuck during the brick phase?
is that 1st splash,2nd splash,...??
This method did not work for me!!!!!
Try the Official Cingular ROM
koorosh_bsboys said:
This method did not work for me!!!!!
Click to expand...
Click to collapse
My Hermes "red hot brick" happened when i tried upgrading to aCRCs_PHKv12r8, from a Schaps_WM6Pro_Hermes_4.31_WWE_Full ROM.
My device is a Cingulat 8525.
The upgrade went to the tricolor screen, and after 1% , my phone magically went off. I tried powering on, but it went to the tricolor screen again showing
IPL 1.04
SPL 2.03
and underneath showed "serial".
me too i'm having the same problem....any experts out there that could help us?
My HTC is under the S/N : H7XXXXX, but accidentally use the H8XXXX to flash it. Now my HTC unable to start except press the "Camera" key and "Power" key to up my HTC, and it only shows the 3-color screen on it.
When I tried to use the original ROM "P3400 - 24 March 2007" to do the flash, but the upgrading fails and shows "Invalid Vendor ID".
Please help me on this. Thanks
Please advise on a solutions
I have the same serial number on my htc but mine i hardspl it with stock rom wm6.1. Tried the reflashing it and still don't wanna work.also tried the mmty program but it not work on my device
Time to visit the Docs. Sorry!
try changing the spl first... check the old posts for old gene..... man you have to do some reading b4 flashing...which spl its showing now is it oref or olpiro.. is it still detecting the Usb... showing at btm lft corner?
the one and only solution is to send the device to HTC service centre...
ther is also 2nd option,,,, if u flash ur device with stock WM5 version 1.7.455.2 WWE
but this ROM is nowhere available..
i hv faced exact same problem , which u r facing now....thn i tried almost every method...but nothing worked....thn finally i send device to HTC service center.....
next day they returned my device fully working again....
so........this is the only way for u now....!!!
bst of luck..
HELLO
i am a new member and sorry for my bad english
my problem that i ve upgrade my hermes and unloked sid ,but i killed my Hermes by trying to fix a "NoGSM error"
now my hermes don t start i can 'thave the boot screen ,only if take the power botton +to access boot screen i traid all solutions but no success
i ve not access to ktl mode;for this resons i supluy your help,i have connet herms and launch device monitoring and officiel rom ,result is attached down,
herm200
IPL 1.04
SPL 2.03
THINKS
Hello STAMBITA, try with mtty for fix problem.
If your OS don't start you try JTAG mode because your Hermes is not super cid (SPL 2.03) for fix problem.
See the post http://forum.xda-developers.com/showthread.php?t=391047&page=17.
Regards
nico
STAMBITA do you have access to a rom provided by your telco? If so try to flash that rom while you're in the bootloader. Since your device isn't supercid it's either that, or JTAG or send it to a repair centre. I'm sorry.
I ve not access to room .with mtty nothing happen nothing .the last solution is to try jtag but is complicate to do.to send for repair centre it cost the price of new one?