My HTC is under the S/N : H7XXXXX, but accidentally use the H8XXXX to flash it. Now my HTC unable to start except press the "Camera" key and "Power" key to up my HTC, and it only shows the 3-color screen on it.
When I tried to use the original ROM "P3400 - 24 March 2007" to do the flash, but the upgrading fails and shows "Invalid Vendor ID".
Please help me on this. Thanks
Please advise on a solutions
I have the same serial number on my htc but mine i hardspl it with stock rom wm6.1. Tried the reflashing it and still don't wanna work.also tried the mmty program but it not work on my device
Time to visit the Docs. Sorry!
try changing the spl first... check the old posts for old gene..... man you have to do some reading b4 flashing...which spl its showing now is it oref or olpiro.. is it still detecting the Usb... showing at btm lft corner?
the one and only solution is to send the device to HTC service centre...
ther is also 2nd option,,,, if u flash ur device with stock WM5 version 1.7.455.2 WWE
but this ROM is nowhere available..
i hv faced exact same problem , which u r facing now....thn i tried almost every method...but nothing worked....thn finally i send device to HTC service center.....
next day they returned my device fully working again....
so........this is the only way for u now....!!!
bst of luck..
Related
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Dear friend
I think you have to install the original rom on your phone , not another cooked ROM.
If you can do that , your phone will be downgrade to original spl .
dead htc advantage
kanwalgee said:
--------------------------------------------------------------------------------
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
Click to expand...
Click to collapse
my frnd i got the 100% same problem pls do let me know if u could get rid of it im also trying my best to solve this but im still there....
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
dead athena
kanwalgee said:
Set your wifi adress with Mtty software after that upgrade with original rom all ok.
Click to expand...
Click to collapse
hi my frnd but mitty is giving me an error msg could u pls let me know how could i get orginal rom and how could i flash it...
hi every 1 ...
here is the situation i'm in:
i tried to upgrade my HTC Touch Dual with an HTC Touch official ROM ,i prosed with the operation but it did not complete for an error then my phone was stuck on the three colors Screen after that I've reseted the phone ( hard reset ) by pressing the call ,end call ,power and reset buttons all together and here...i realized that i made a disaster because that my phone is not starting and make no response on the screen and it's totally black and when i connect it to the PC ,the indicator light led torn's red!!! and the PC dose not see it i tried to hard reset it again it didn't work.
Please help me ....
Regards.
hi
hey m8 i had this problem b4 also i just ran a different rom whilst it was in the tri colour screen and it was all up and working again.
hope this helps
kind regards Martin J
Thank's 4 the fast response bro but the problem that is when i flashed the phone with wrong ROM i had the tri color screen but after that i hard reseted the phone as i described above and the phone went died and red lid light indicator on USB cable.
Regards
Saif Al.Deen.
have you tried to enter the bootloader?
yes i did if it mean's pressing the camera and the reset button together but i learned this method in an HTC Touch thread replay so if it's the same (pressing the camera button and the reset button by the styles) it means that I've also tried it and did not work. and please ,if there is any other way to enter the Bootloader just feel free to tell me about it cuz i think that when i get the tri color screen again i will able to flash the phone with official English ROM of WM 6.1 that I've downloaded from the HTC site unless there is some thing that i don't under stand.
thank's Midget.
http://wiki.xda-developers.com/index.php?pagename=Enter in bootloader
I did use the method (pressing Power+Camera+Reset) and I've got the tri-color screen the PC saw the phone and I've got the "USB" text on the phone screen then i started the ROM upgrade utility then i noticed the text under the tri-color is changing once "Serial" and another "USB" and so on until it stay's on the "Serial" and the upgrade utility show's an "Exit" button ,i press it ---> it exit's!!!.then i just disconnected the phone and reconnected it to the USB the tri-color showed the "USB" text then i started the ROM upgrade utility and got the same results.then i soft reseted the phone by the styles and get back to the same old situation ( black screen and red led on connection) and the phone is not entering the tri-color mode using the same method using the same method u linked me in ur last replay (pressing Power+Camera+Reset)!!!!!!!!
What should i do ...
please help me coz no one to ask near me and we have no HTC center here in Iraq and it look's like that i'm the only one who carry an HTC phone in my hole country!!!
Now ...here is what I've got:
thankfully managed to get back to the tri-color screen it seem's that i had a problem with USB cable ,any way ...i started the ROM upgrade utility that i downloaded from the HTC official web site that named (RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) at the first time i had a connection error 260 then i disconnected the phone then reconnected it the PC saw the phone and the upgrade utility did too and started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
It's some kind of a progress .. right..but what's wrong ?? Q/ is the ROM ?? A/ I downloaded it from the official web site and it's for the HTC Touch Dual...then what????
Please do not let me down ... my hops are only on ur experiences.
Regards.
Now ...here is what I've got:
thankfully managed to get back to the tri-color screen it seem's that i had a problem with USB cable ,any way ...i started the ROM upgrade utility that i downloaded from the HTC official web site that named (RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) at the first time i had a connection error 260 then i disconnected the phone then reconnected it the PC saw the phone and the upgrade utility did too and started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
It's some kind of a progress .. right..but what's wrong ?? Q/ is the ROM ?? A/ I downloaded it from the official web site and it's for the HTC Touch Dual...then what????
Please do not let me down ... my hops are only on ur experiences.
Regards.
sparketo said:
thankfully managed to get back to the tri-color screen
Click to expand...
Click to collapse
That's good. Ready to flash again.
RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) ...started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
Click to expand...
Click to collapse
The phone is locked to a particular phone company. You'll need to unlock it first. So, a bit more work needed. Follow this thread. but make sure you read it carefully:
http://forum.xda-developers.com/showthread.php?t=395945
Ok now...here is the situation:
as u advised ,i went to http://forum.xda-developers.com/showthread.php?t=395945 and it say's in (1.) that i must have a HardSPL 1.15 MFG installed (i have SPL 1.18 installed) then i went to the thread http://forum.xda-developers.com/showthread.php?t=355730 to get the HardSPL 1.15 MFG and i've found it but here is the problem:
in step (4.) i have to install sspl 1.16 nike.exe by copying it to the phone memory ,but i only managed to enter the tri-color screen and i can not copy any thing in to my phone so who am i gonna install it??? then i saw the other attached files flash-hardspl-niki.zip and flash-splash-niki.zip and all others ,what i get when i start the utility after unzipping the attachment is error in connection and the bar stay's on 0% and start the recovery system....
by the way ...all i see on the tri-color screen is the following:
RUUNBH on the right upper side of the screen.
NIKI 100 ,SPL-1.18.0000 and CPLD-4 on the upper left side of the screen in the red bar.
USB of Serial in the bottom wight bar.
thank u all 4 ur effort ,but i have no place else to ask for help....
so please stay with me to the end ...i hope it will be a happy end.
Thank's
sparketo said:
what i get when i start the utility after unzipping the attachment is error in connection and the bar stay's on 0% and start the recovery system....
by the way ...all i see on the tri-color screen is the following:
RUUNBH on the right upper side of the screen.
NIKI 100 ,SPL-1.18.0000 and CPLD-4 on the upper left side of the screen in the red bar. USB of Serial in the bottom wight bar.
Click to expand...
Click to collapse
From this point, we know you have SPL 1.18 on board, with a locked ROM to a phone carrier.
Best advise I can think of is to get the official ROM from the carrier and flash that. It will get you back to starting point
After that, copy SSPL 1.16 to phone, and run that on phone, followed by falsh to Hard1.15MFG before trying to unlock the phone.
ok Rling .....
the phone was sent to me from Holland (Netherlands) and when i was turning it on on startup it show's a logo of number (1) or something like that.
so please can any one tell which carrier is that and where to find it ????
by the way Rling and Medget and every one ,thank u all for ur time u spend helping me ^_^.
Best Regards.
try to find your phone's original country in following website.
http://service.htceurope.com/htcdistributor/Default.aspx
then, you can know which language rom is suitable to your phone, try to find it.
flash the original rom
everything will be ok...
Good luck
Thank u 4 ur help Justsun i really pretiate ur help i found this link qaite helpfull and i managed to find the original carrier which is KPN and it's in Netherlands, the problem is, i do not understand any word in the web site because it's not in english and some how it look's like that there is no traise for the ROM in the site.
so please any one can help me with providing a link for the original carrier ROM of KPN or send it to my email or just any any thing just i'm feeling so disperet ...
Thank u all...
Yes Yes Yessssssssss at last Windows boot's up my phone after a long week ...
spesial thanks to homerh ... thank u bro without ur help i would throw my phone in the garbage. God bless u.
And thank u all for ur help.
Best Regards.
Saif Al.Deen.
sparketo said:
Thank u 4 ur help Justsun i really pretiate ur help i found this link qaite helpfull and i managed to find the original carrier which is KPN and it's in Netherlands, the problem is, i do not understand any word in the web site because it's not in english and some how it look's like that there is no traise for the ROM in the site.
so please any one can help me with providing a link for the original carrier ROM of KPN or send it to my email or just any any thing just i'm feeling so disperet ...
Thank u all...
Click to expand...
Click to collapse
you can go to www.htc.com then find suport, use your sn, you can download the original ROM. flash it first, then flash other rom which you need.
Thank u Justsun ,i just solved it by the help of Homerh and now i have the original ROM on my phone and by the way , i did not flashed it ,Homerh teached me how to restore the original ROM on the phone using the mtty and that's it. now i'm looking for a ROM that support Arabic for my HTC Touch Dual ,if u can help me find it ,i'd be pretiated.
Thank's.
hi...
i hv HTC gene (HT8XX) (Old Gene)..
SPL 1.07.0000
ONBL 1.07.0000
right now i have stock WM5 Rom...
but last night i tried to flash WM6.1 fusion 9 Rom on my device..but
when i started RUU, everything was fine...but at last it showed
ERROR [300] INVALID UPDATE TOOL
history:
( previously i used same RUU to flash my phone....i was using Fusion 9.0 perfectly
but since i flashed wrong Rom so it bricked my phone....
than i gave my phone to HTC service center , they made it all right again..but they flashed stock WM5 ROM...
now i wanted to flash WM6.1 ROM but when i tried to flash than RUU showed this "ERROR [300] INVALID UPDATE TOOL" )
so....please tell me....what can i do to fix this problem ???
thanks in advance...!!! plzzz help
i think you are using wrong rom update utility...use the rom update utility that comes with the rom... and make sure that you are using the correct rom for old gene...which is your spl.
is it showing oref spl at tricolor screen then you must use jtag method......
go4thomman said:
i think you are using wrong rom update utility...use the rom update utility that comes with the rom... and make sure that you are using the correct rom for old gene...which is your spl.
Click to expand...
Click to collapse
dear.....i m using correct RUU as i used this RUU several times b4 i got my device bricked....
this problem is started after return of the phone from HTC service centre...
i hv tried almost all RUU which is available for gene..
and i also tried flashing almost 5-6 different roms...but same error all the time....i m using the same RUU which comes with ROM by default..
My SPL is 1.07.0000...
go4thomman said:
is it showing oref spl at tricolor screen then you must use jtag method......
Click to expand...
Click to collapse
i m using olipro method for hspl...
in which spl doesnt change...it just temporary unlocked for me..
it was working perfact for me...
i hv used almost every ROM available for OLD GENE..
but last time bcuz of flashing wrong ROM m device got bricked...
since than this problem started ..
go4thomman said:
is it showing oref spl at tricolor screen then you must use jtag method......
Click to expand...
Click to collapse
and..................i never got tricolor screen ....
whenever i hspl my device than phone reboots thn screen becomes white....thereafter...i used to flash ROM
everything is working well as usual upto white screen....
but at the time of flashing ROM RUU shows error....
hksin1988 said:
dear.....i m using correct RUU as i used this RUU several times b4 i got my device bricked....
this problem is started after return of the phone from HTC service centre...
i hv tried almost all RUU which is available for gene..
and i also tried flashing almost 5-6 different roms...but same error all the time....i m using the same RUU which comes with ROM by default..
My SPL is 1.07.0000...
Click to expand...
Click to collapse
Hey buddy, since you have given your ROM to HTC, they have again locked your CID, please go throught the stickey to how to flash again. Best of Luck
No Shaunak, there is something else wrong. He is saying that he tried to use the JumpSPL method. Its an alternative and temporary method to unlock CID for flashing ROM. HardSPL is different, it makes changes permanent.
Dear sksin
The phone is again bricked or you are currently using(able to boot) the wm5?
Dear hksin
Same problem i also have faced and finally i recovered it.
Please go through
1.The serial no. of the phone Is the sticker shows same S/N as before?
2.The HTC people has changed your IMEI No ?
If Yes then ,Now after comming from service centre your Gene has become the new Gene.
and you have to treate like this.
so do the gene unbricker solution by MTTY method and you may recover
All the best.Good luck!!!!
rkpatro said:
Dear sksin
The phone is again bricked or you are currently using(able to boot) the wm5?
Click to expand...
Click to collapse
dear..
I m currently Using the Phone With WM5 Stock
its not bricked and working perfactly..!!!
rkpatro said:
Dear hksin
Same problem i also have faced and finally i recovered it.
Please go through
1.The serial no. of the phone Is the sticker shows same S/N as before?
2.The HTC people has changed your IMEI No ?
If Yes then ,Now after comming from service centre your Gene has become the new Gene.
and you have to treate like this.
so do the gene unbricker solution by MTTY method and you may recover
All the best.Good luck!!!!
Click to expand...
Click to collapse
Dear rkpatro,
i hv checked IMEI no of phone ,,,its is same as previous..
and can u please tell me that how to check my phone's serial no. via phone only.
bcuz on the phone's box its serial no starts frm HT80XXX
but i found no way to check serial no frm the phone to confirm.
is ther any way ??
Remove the battery and you will be able to see the serial number. Please check the stickey by krazy. Now Old ROMs are appearing with 8xxx serial numbers!
Looking at your spl version, i could be wrong but I think yours is an old Gene
Addicted2xda said:
Remove the battery and you will be able to see the serial number. Please check the stickey by krazy. Now Old ROMs are appearing with 8xxx serial numbers!
Looking at your spl version, i could be wrong but I think yours is an old Gene
Click to expand...
Click to collapse
yeaa my phone has serial no starting form HT8XX
but it always works as old gene.
as before breaking my device , i almost flashed all the ROMs available for Old gene.
but mistakenly i flashed Krazy's Rom, cuz i thought tht my phone is also HT8XX
but later on i understood that my phone's SPL is 1.07.0000, which is for old gene..
anyhow my device became unbricked....but unable to flash the same Roms which i flashed in past...
so i m confused that wht is wrong with the device now..
i think that HTC guy has put some kinda Lock for flashing .. is that it ???
or is ther some other reason..
As dear rkpatro suggested that after returning from service center is has become new gene, but i am not satisfied with this . becuz everything is same as past time...
SPL n ONBL r also same as well as IMEI and serial no, even they flashed exact same ROM as it had previously..
so i m not getting that wht the problem is..
becuz everything is same , than y the Roms r not working..
i hv tried each Rom again which i was using in past...
but flashing ends up by error 300..
so guys,,,, please think something abt it...
ur attention to my problem is always appreciable....
thanks in advance..!!!
Yes, HTC has again cid locked your device, I think it should be better to get help from the krazy's sticky post on flashing a locked Gene.
Best of Luck
Black metal rom, p3401 can?
I'm having problems.
All the ROMS are giving p3401 error and my machine is only on screen color.
my SPL is 1.10. olip
someone can help me
rom or tell me what works?
Addicted2xda said:
Yes, HTC has again cid locked your device, I think it should be better to get help from the krazy's sticky post on flashing a locked Gene.
Best of Luck
Click to expand...
Click to collapse
Hi dear...
just wanna know.....that when i firstly flashed my device, than i used olipro's spl method
1.10-Olipro.nb
and Jump slp
that time my device was CID locked also, but i succesfully Flashed WM 6 Rom by this method/..
no error was ther..
now as u r sayin that its again CID locked.. so i followed exact same procedure as i followed for the first time....but this time i ended up with this strange error...
so....is ther any possibility of something else ???
solution ???????????????????????
Any Solution guys ??????????????????????????????????????????????????????
problem Solved...!!!
finally..............my problem has solved,,,,infact....my old gene has become new gene now....isnt it miracle...
nyways....even being onbl n spl 1.07.0000 originally....i successfully patched my device with hspl for new gene...and i installed Sumit's VanillaManila ROM ( for new gene)...
its working superb....thanks...!!!
I tried to flash rom wm 6.1 edition but suddenly when flashıng was %80, its broke and failure.
Now my phone broke only htc pic came.Please some one help.I read all the post about it.I cant master reset on my phone because when i push the 0 button htc pic came again.Only bootloader mode can works but ı try many than 10 roms it starts but when they are %5-4 ,they broke too.Then this type came "İmage file corrupted and please check update utiltiy"
I read at one blog if this situtaion came i must use smartflip stock rom to flash but i cant find imateclub's web site is broke too.
Here is the smartflip official rom http://rapid share.com/files/307222427/i-mate_smartflip_WWE_1.2.301.2_ship.exe
check my post about gold card method, and then you could flash with your official rom
Hello everyone
i got similar problem too. it can restart the phone but goes to all white screen.
i even tried over 15 Roms to reinstall it but it all got failed.
Here is my phone video below
http://www.youtube.com/watch?v=W9h91HWdkvA
Please give me some help.
Thank you so much
someone had told because i have IPL 1.02 & SPL 1.02 but with WM6 above system.
i need to re flash phone to IPL 2.00 & SPL 2.00, BUT .....How to do it ?
Please help!!
Thanks
read my post about gold card method. i had the same problem and recoverd my phone. good luck