Related
Hey people I flashed my TyTN to the updated HTC version (from the wiki) and am planning on going for the dopod one....if i decided to revert back to the HTC one again that IS possible right???
yes, there should be no problem on doing that.
....quick update, ive got the dopod rom on it but no 3G app or MMS. If i download the latest HTC ext_rom from the wiki how do i get that on the phone??
just unzip and install the cab files manually
Done, im still missing the voice dialer?!? the voice dial button produces an error, and the icon is missing from the settings->personal menu????
....update again
Ive settled for the I-mate ROM which works just great, includes the voice dialling app that i mentions, i also installed the HTC ext rom files and works superbly now....no problems to report infact works a tad faster than the HTC rom shipped with it.
TCPMP works fine, still no luck working with the ATI drivers but the audio stuttering (after a pause or skip to alternate part in video) is resolved so i cna now watch a video at my leisure!
Installing extended ROM
Should I just copy over the unzipped contents (cab files) into the extended ROM area or do I manually install the cab files by clicking on them within the Hermes? Thx.
From what ive seen you can do either sir. If you copy the contents into the External ROM directory (once you have unlocked it) you can just run the "autorun.exe" file and it will do the "will customise device in 3 seconds" just like on the first startup of the device.
Not sure if the Autorun.exe file will work if it is not in the external ROM directory so just run each .cab from file explorer....ignore any prompts for a restart and soft reset the device when you have finished.
mrvanx said:
i also installed the HTC ext rom files and works superbly now....no problems to report infact works a tad faster than the HTC rom shipped with it.
Click to expand...
Click to collapse
I am also using the imate firmware and find it better and quicker than the other HTC and Dopod rom, esp when using Tomtom 5.21.
What benefit did you get from installing the cabs from the HTC Rom?
mrvanx: Thanks for the info. Does the Program and storage space increase or decrease with the i-Mate ROM as compared to the HTC ROM? Thx.
Here I have a bunch of boring ROMs for your StarTrek. I call them boring because they are devoid of any personalization, customization, or 3rd party apps other than what comes with a shipping ROM. These ROMs are OS only, will not change your initial splash or radio (but it does change the operator splash). A text file ReadMe.txt in the download contains brief instructions on how to flash this ROM. Apparently the 3.06 IPL/SPL in QTEK ROMs is broken and cannot recover via MicroSD so I would recommend updating to 4.01.0001 prior to flashing any of these ROMs, although that in itself can be risky (see below for download). Enjoy, and flash at your own risk!
Details
5.2.1711 (Build 18170.0.5.1) Core OS (SYS) is ported from T-Mobile Shadow Feb. '08 update.
OEMAPPS and OEMOPERATORS are straight from CWS 4.1.502.5 ROM. It has the latest camera and apps.
OEMDrivers specific to StarTrek are the latest, from 4.1.502.5 ROM. Some common libraries are from TMO Shadow ROM.
OEM Edition for AT&T 3125 - The same old, boring, Cingular-branded ROM you're used to, only ported to WM6. My objective with the Boring Edition is a ROM that's indistinguishable from what an OEM would put on a shipping device. This is based on Cingular ROM v4.1.502.5 with many changes made throughout to work with the WM6 core, but hopefully the changes are transparent. It comes with all the bloatware and apps that came with the original Cingular ROM. If you want lots of storage and free RAM, this is NOT the ROM for you!
Adobe Reader LE 2.0 (new, from TMO Shadow, replaces original ClearVue PDF)
Office Mobile (new, replaces original ClearVue Office suite)
Windows Live/Live Messenger (new, replaces original MSN Messenger)
Microsoft Voice Command (replaces Cyberon Voice Dial)
English-only xT9 (new, from HTC S730 "Wings", dated Sep 7, 2007, replaces older T9)
Esmertek Java (new, from TMO Shadow update, replaces discontinued Tao Intent Java)
Cingular bloatware, customization, setup, and theme
Clock/carrier block of Cingular theme changed to standard WM6 style (I liked the bigger clock).
SecurityOff (required, because some apps can't install with it on)
Clean ROM WM6 - Similar to the above (same drivers), but lacking Cingular customization and bloatware. Does NOT have Microsoft Office or Adobe Reader. This will leave more storage available for 64MB devices like QTEK 8500 or iMate Smartflip. As this is an unbranded ROM, you will need to manually set up your GPRS and Proxy connections.
Windows Live/Live Messenger (new)
English-only xT9 (dated Sep 7, 2007)
Esmertec Java
Cyberon Voice Dial
SecurityOff (required, because some apps can't install with it on)
Neo Edition Clean WM6 ROM - Same as above, only added Neo theme from the T-Mobile Shadow. No other customizations.
CREDITS
Thanks to pArtizAn (Erofich), Alex[DFR], Strik3r, and Chymmylt for use of the WM6 XIP in early versions of my ROMs. Without it, my first ROM would have been delayed 2-3 weeks.
Known Bugs - Applies to all versions.
Analog Clock 2 and Analog Clock 3 on external display don't look right. NOT a WM6 bug because the original Cingular WM5 has the same problem!
Possible xT9 can't backspace on some websites bug.
Roll your own! Here are the SYS, OEM, and ROM folders for the Clean Edition ROM. Add this to your favorite kitchen. RUU included.
For experienced ROM builders only!
Download Clean Edition Kitchen files
Other Updates
These are from the latest Cingular ROM, newest for STARTREK that I'm aware of. I have tested these and they worked fine on my phone but I am not responsible if you take the risk and they damage your phone! Flash at your own risk!
Download IPL/SPL 4.01.0001 CAUTION: Flashing IPL and SPL could kill your phone... permanently!
Download Radio 4.1.13.34_02.79.30
Download Radio 4.1.13.46_02.97.90
Prerequisites
Your device must be CID unlocked! See this thread.
Please report any bugs with a detailed explanation of how to reproduce them.
Change Log
Mar 6, 2008 - OEM version, single press of RECORD button activates Voice Command. Should support BT activation now. All clean versions now use the same animated HTC splash. Shows HTC logo on outside screen instead of blank (thanks Erofich). I figured how to port XIPs so all ROMs now use my own XIPs ported from scratch. Added Neo and WM6.1 editions.
Feb 21, 2008 - Fixed Vibrate in Profiles bug, possibly fixed Microsoft Live can't connect bug, updated some files (no longer have to press OK after cold boot setup), newer OS build (18170.0.5.1), newer Esmertec Java, Sim Manager, changed Cyberon Voice Dial to MS Voice Command on Boring version.
Feb 18, 2008 - Changed Tao Intent Java to Esmertec Java, T9 to xT9 on all versions. Added download links to latest radio and IPL/SPL.
Feb 16, 2008 - Added kitchen files for Clean Edition.
Feb 15, 2008 - Added Clean Edition. Changes to Boring Edition: T9 problem fixed, Start menu now allows scrolling (no need to press More), SecurityOff to fix programs can't install problem.
Feb 13, 2008 - Original Release of Boring ROM.
Click to expand...
Click to collapse
Extras
Clean ROM a little too clean? Here are some add-ons in CAB form.
Adobe Reader LE 2.0 Build 288531 (from T-Mobile Shadow)
Neo Black & Blue Theme - Only works on ROMs with Neo integrated. Not just a simple color change, I tried to copy the mockup of T-Mobile Black. It looks almost identical to the mockup on my PC, but unfortunately the conversion from 16.7m to 65k colors results in some false contouring.
thanks man!!
does gprs work in this one?
GnatGoSplat said:
Boring ROM WM6 Cingular (AT&T) - It's the same old, boring, Cingular-branded ROM you're used to, only ported to WM6. My objective with the Boring ROMs is to make a ROM that's indistinguishable from what an OEM would put on a shipping device. This is based on Cingular ROM v4.1.502.5 with many changes made throughout to work with the WM6 core, but hopefully the changes are transparent. It comes with all the bloatware and apps that came with the original Cingular ROM. If you want lots of storage and free RAM, this is NOT the ROM for you!
XIP is thanks to Erofich's WM6.
5.2.1711 (Build 18165.0.5.0) Core OS (SYS) is ported from T-Mobile Shadow.
OEMAPPS and OEMOPERATORS are straight from CWS 4.1.502.5 ROM. It has the latest camera and apps.
OEMDrivers specific to StarTrek are the latest, from 4.1.502.5 ROM. Some common libraries are from TMO Shadow ROM.
Changes
Behind-the-scenes changes were numerous, but visible changes are minimal (although I did make a few):
Office Mobile replaces ClearVue apps. Most devices that used ClearVue in WM5 were changed to Office Mobile in WM6 so monkey see, monkey do.
Adobe Reader LE 2.0 from TMO Shadow replaces ClearVue PDF.
Clock/carrier block of Cingular theme changed to standard WM6 style (I liked the bigger clock).
Known Bugs
Analog Clock 2 and Analog Clock 3 on external display don't look right. NOT a WM6 bug because the original Cingular WM5 has the same problem!
OS only, will not change your initial splash or radio (but it does change the operator splash).
Download
Please report any bugs with a detailed explanation of how to reproduce them.
If there is much interest, I can make a cleaner, unbranded version of this ROM or a vanilla kitchen.
Click to expand...
Click to collapse
Will this work on i-mate SmarkFlip (out of box device without any hacks)
Yes, GPRS works, but I use T-Mobile so I had to add a connection to T-Mobile GPRS. It should work with Cingular/AT&T as-is.
It should work on a SmartFlip, but I'm not sure if you need to CID unlock first.
Downloading and installed...
Attempt 1: Read everything within the Word file. Installed right from the RomUpdate program in the root directory of your
WM6 update. Didn't work, so I will attempt what you have in the Readme text file in my next attempt....
Attempt 2: The Update Utility program says version 3.12.3.1 on the title while the pictures you have in the word file says
version 2.99. Also, when I go through to update ROM, it verifies my current Image version as 4.1.502.5,
I click Update and the next screen it indicates that it will be updating from my current version to the
new version of 1.00.000.0. Then, a minute or so later, I get the following message:
ERROR [270] : UPDATE ERROR Image file is corruprted. Please check your Update Utility.
Do you know how I could resolve this matter because you do not list error 270
within your troubleshooting material? Your UpDate program is not even the same version!
Vista Home, Cingular 3125 unlocked with current released Rom version. So, what am I missing here?
Sorry, I shouldn't have included the Word doc, it's the standard doc that came with the RUU and happened to be in the folder at the time.
Are you using SoftSPL? You MUST use the SoftSPL, it won't work to just run the RUU. The doc I wrote is ReadMeWM6.txt.
You also need to CID unlock according to the sticky thread.
kumar00455 said:
Will this work on i-mate SmarkFlip (out of box device without any hacks)
Click to expand...
Click to collapse
@kumar00455,
GnatGoSplat noted that this should work on any StarTrek, but there is something you should be aware of. In the past, it seems like a lot of people that have tried a Cingular ROM on a StarTrek that is not a 3125 model have not liked it, because they ended up with too little storage memory. This is because Cingular has loaded a ton of large crapware programs on their ROMs. Now, that isn't a big problem for the 3125, because it is actually different hardware from all other StarTreks - it has double the storage memory (128MB) all the other StarTreks (which have 64MB). Since GnatGoSplat has tried to make this just like a Cingular ROM, with all the added programs, you may find you have the same problem. However, I do think there is a thread here somewhere that talks about how to clean all the crapware off of a Cingular 3125 ROM and reclaim some storage memory.
@GnatGoSplat,
Thanks for putting this together - I think I will try it soon on my 3125! I would be very interested in a cleaned-up version and a kitchen as well. And of course, many thanks to Erofich and everyone else who worked on getting WM6 on the StarTrek. I thought we would never see this day!
Oh yeah, I forgot the 3125's have double the storage memory!
I'll make a slimmer, cleaner ROM as soon as enough people have tried this one to confirm it doesn't have any significant problems.
What apps are essential to keep in a cleaner ROM and which can go? What are typical apps that come on a Smartflip or 8500?
device PIN lock working?
Can anyone who has tried this ROM tell me if the security PIN lock works correctly without any problems? I sync my 3125 with my corporate Exchange server, and our IT people enforce a device PIN lock requirement through the Exchange server. So I have to enter a 6 digit PIN if the phone has been idle over an hour. Anyway, I'm interested in flashing this ROM, but if there is any problem with that functionality in this ROM, it would be a deal-killer for me... Thanx...
GnatGoSplat said:
Oh yeah, I forgot the 3125's have double the storage memory!
Click to expand...
Click to collapse
I do like your approach here, though. Start with something as much like the carrier ROM as possible until you know that it's pretty stable, then put it on a nice diet to make it lean and mean. Makes good sense to me...
GnatGoSplat:
i am in china. so i download this file so slow,can you send to me ?my e-mail:[email protected]
SoftSPL
Ok I'm where do i put the SoftSPL file and how do i use it. i tried putting it in Windows directory nothing. please help i really want to get WM6 on my 3125
guyver76 said:
Ok I'm where do i put the SoftSPL file and how do i use it. i tried putting it in Windows directory nothing. please help i really want to get WM6 on my 3125
Click to expand...
Click to collapse
Put it in the root of your device /not/ Windows. Start softspl.lnk as it says in the manual
I tried to use the program you directed the user to transfer. Everytime I clicked on it, I would get an error which stated that the link's program could not be found.
Don't get me wrong over here, I read the directions a few times and did everything you instructed. I am pretty good with directions and I am not one for doing things my own way. If I could help in anyway, just say something. I have alot of times on my hands and I am educated in matters, like, programming on my home desktop.
I made several attempts, I still get the same error, time and time again.
Are you trying to run the correct SPL? The one that looks like a square with a blue bar on top is the correct one. The one that looks like a piece of paper with the corner folded and a Microsoft icon in the center is NOT the right one.
Also, copy ONLY the files and NOT the whole folder. All these files need to be on ROOT folder of your device. If you're using ActiveSync, when you open your device icon, it defaults to My Documents so you have to go to My Device.
Okay, there we go. I copied the entire folder. Sorry. :O(
I'll make a new attempt in just a few.
UPDATE: I tried it, and now instead of an error, it just doesn't do anything. Sorry.
GnatGoSplat -
Thanks man, this ROM has been perfect so far. Just like my previous cingular rom with WM5. You did a superb job. This is just what I was looking for. Thanks Again!
I am waiting for the slimmer ROM since my device is teh European QTEK 8500. I am waiting impatiently
Churchill said:
I am waiting for the slimmer ROM since my device is teh European QTEK 8500. I am waiting impatiently
Click to expand...
Click to collapse
Its worth the wait!!
Thanks
Thanks for the reply i got it working now
A kitchen of a cleaned Sprint's 3.35.651.2
running WM 6 CE OS 5.2.1629 (Build 18136.0.4.8)
(no radio included -- requires 3.35.04, 3.37.20, 3.39.10)
With the release of 1.3.0 I think that this project may be complete.
I can't think of how to safely free up any more memory and every module
that I had planned is packaged separately into the kitchen.
Small additions may come but I can't foresee any major revisions.
Using DogGuy's Kitchen Maker this was originall based off of a1jatt's preliminary cleaning of the official Sprint release, v1.3.x is a direct cleaning of the 3.25.651.2 OS ROM.
I have packaged the latest official Alltel, Sprint, and Telus carrier setups, with the rest from DCD.
The base (with Office) of this kitchen installs a ROM at 49 MB and when first after boot providing ~25.6 MB of RAM free at the default 6 MB pagepool:
OEMizer & PagePool Changer utils are included for you to customise your ROM further.
Carriers:
Alltel (settings from the April/08 release), Bell, Cricket, QWest, Sprint (settings from March/08 release), Telecom, Telus (settings from the July/2007), Verizon
Removed:
.NET CF 2.0, HTC Guardian, SQM, HTC Home, HTC Task Manager, Adobe Acrobat
Cyberon Voice Speed Dial, Esmertec Java, remaining items of Sprint Navigator, Lockstream DRM, Windows Live, Office
Kitchen:
Except for the rotten HTC Guardian, the kitchen includes all of the removed
apps and utils, plus some fundamental choices for tweaks,
dotFred's Task Manager & Registry Editor, Oxios Memory, SIPChange,
and No2Chem's nueLED 1.5 & nueAudio 1.0,
Remote Desktop, Today Screen Disable Options, UC Compatibility auto-run after first boot,
choice of the newer .NET CF 3.5 or .NET CF 2.0 as included with the Sprint ROM,
Office, OneNote, Windows Live, DCD's standard registry tweaks....some games..., HTC Zip, Touch Dialer,
Esmertec Jbed 20080222_3_1, Esmertec Jeodek 20080115_4_1 (read here for info on differences)
- you may add your own to the Kitchen's OEM directory.
This kitchen package is released to be a small and stable base for the OS.
Follow to this XDADeveloperWiki page for links to many OEM packages for you to
collect and apply the individual items that you wish to build into the ROM.
MIRRORS:
v1.3.2
http://www.megaupload.com/?d=5VR5SV7S
http://www.mediafire.com/?mawzy1wp5dn
v1.3.1
http://www.mediafire.com/?ehydfqjwtyc
http://www.megaupload.com/?d=A457KYNF
v1.3.0
http://www.mediafire.com/?llebzi2snvd
http://www.megaupload.com/?d=M6X685I0
v1.2.5.1
http://www.mediafire.com/?djyuznmmmtn
http://www.megaupload.com/?d=5IKSTCCX
v1.2.4
http://www.mediafire.com/?jzyyoem1zn2
http://www.megaupload.com/?d=LGSDOOL3
THANKS GOES TO:
DCD, a1jatt, No2Chem, and DogGuy for his excellent kitchen utility!!!​
~~~~~~~~~~~~~~~~~~~~~
Easy installation:
HINT: Avoid hassles with your USB connection and PC by flashing via a non-SDHC microSD card
This ROM requires Olipro 2.40 bootloader
If flashing ROMs via the microSD method then update to 2.40 before continuing on.
radio 3.35.04, 3.37.20, or 3.39.10 is required
via the microSD card flashing method (below), upgrade your Titan directly to the radio without reflashing the OS or via the full Sprint 3.35.651.2 ROM (radio 3.35.04) or Alltel 3.35.671.9 ROM (radio 3.37.20) or Sprint pre-release 3.49.xx (an executable archives, right click to extract the RUU_signed.nbh ROM file)
Use the SD card method to only flash the CDMA radio to 3.37.20 or 3.39.10
Flash to one of the latest Sprint or Alltel ROMs but do NOT boot into the OS after flashing to this ROM.. Carrier specific customisations will run after screen calibration and alter your EPST settings.
Repeat the microSD flashing routine to flash to the kitchen built ROM.
I. OEMizer (optional)
Run OEMizer.exe from the kitchen's tool directory.
Complete your choices to customise your Titan's OS/Owner/Data/etc configurations
Hit the 'Create OEM' buttom for the customizations to be written into the kitche's OEM directory.
Build your ROM via the kitchen.
II. Kitchen
Run BuildNB.bat to execute BuildOS.
Hit the play button when you have selected your choices.
Exit BuildOS once it has completed.
Let the batch file complete its jobs.
quit the ROM Upgrade utility when it loads up and skip onto the following instructions on how to flash via the microSD card method.
OR follow through to finish the flash with the ROM Upgrade Utility via the USB.
III. PagePool Changer (optional)
Run PagePool Changer.exe
Select your ROM -- /RUU/RUU_signed.nbh
The default is 6 MB
The Titan has limited RAM so it isn't recommended to go beyond 8 MB
go smaller if you want more RAM free
Hit 'Close' when ready.
Flash your custom ROM.
IV. Flashing via a non-SDHC microSD card
With a card reader on your PC, format a non-SDHC microSD card into FAT32 (tested to work up to a 4kb cluster size)
From the kitchen's RUU directory, copy the ROM (RUU_signed.nbh) to the root of the microSD
Rename the ROM to TITAIMG.nbh
Insert your card.
Force into the boot loader with POWER-CAMERA-RESET
Follow the instructions and you'll quickly flash your Titan...
This will work to flash with an official ROM and radio, I think regardless of the boot loader you have installed. But ensure that you have the correct boot loader (olipro 2.40 for this ROM) installed for when you do eventually finish with your flashing and are ready to boot into the OS.
change log
Known issues: nada
~~~~~~~~~~~~~~~~~~
v1.3.2 [23/04/08]
Updated Alltel carrier settings to the that of the April/08 Alltel 3.35.671.9 ROM
Alltel specific Arcsoft MMS settings -- waiting for those on alltel to test
Updated from the new Alltel ROM:
bluetooth drivers BTHCI.dll
CDMA_API.dll
InitProv.dll
v1.3.1
updated Sleuth255's UC to v2.0
Choice between the stock and Touch camera
Choice between the old (stock jeodek) and latest Esmertec Jbed 2008/02/22 Java (apparently you may install both -- read here for info on differences)
Changed mxip_notify.vol to remove any Customer Feedback reminders
Customer Feedback link in settings is removed by default without the need to select DCD's common registry tweaks
v1.3.0
Fully cleaned remaining SQM bloat...well, except for the customer feedback link in system settings.
Finally OEM'd the stock dialer so dialer skins are now supported by the kitchen - fttilt's Touch dialer is included
Sprint is now using nearly identical operators settings as the official ROM
The missing '1' in the stock dialer when using Sprint is resolved.
v1.2.5.1
Back to the stock AudioPara.csv only. The available modifed ones are incompatible with the profile of SPB PhoneSuite and tend to lock up the device. They're for WM 6.1 only? I may include a working option from one created with nueAudio within WM 6, but you can include nueAudio into the build and quickly personalise the handset and 'earcuple' settings within the OS.
v1.2.5
Customer feedback and SQM is removed.
Removed Office, OneNote, and Windows Live and added their options to the kitchen.
Added a choice of Scrufdog's louder AudioPara.csv (tested and works with SPB Phonesuite) or the stock file from Sprint.
Added the option of DCD's regular ROM tweaks.
Were previously bundled into the SYS directory by a1jatt.
v1.2.4
Removed Lockstream DRM as it was prompting issues with the PRL and slow boots.
Returned .NET CF 2.0 as per the Sprint ROM providing the choice between that OR the latest 3.5
v1.2.3
A choice of Comm Managers is now possible
Included the popular 10 button manager
Removed the modifed audiopara.csv and replaced it with the stock file.
It was interferring with SPB Phone Suite's profiles
v1.2.2
Changed the .NET CF 3.5 package to the one included in _Alex_'s v5.1 OEM pack.
Removed the Lockstream DRM files and added it as a kitchen option.
Kitchen additions:
FTouchFlo, FTouchFlo Config, Remote Desktop, and Today Screen stock item disable options.
v1.2.1
I was wrong, it was not .NET 3.5 that was causing the trouble but No2Chem's battery .dll was somehow preventing apps from seeing/accessing COM4.
the battery dll is back to stock.
.NET CF 3.5 is back in and 2.0 is once again removed.
v1.2.0
to resolve VisualGPSc not seeing the GPS's COM4, I removed .NET CF 3.5 and reverted back to Sprint's stock 2.0
removed No2Chem's nueAudio from the kitchen as it requires .NET CF 3.5
v1.1
Added carrier selections
Telus based services from last summer's WM6 offical release
Remainder carriers from DCD's releases
Removed Adobe Acrobat Reader
v1.0
My FIRST ROM/kitchen!
Thanks Key... downloading now. I've been looking to cook a custom TELUS ROM with WM6 and drivers that support the new radio.
FIRST IMPRESSIONS:
- Very Speedy ROM overall
- initial free RAM is ~24 as claimed
- I still think an 8MB pagepool is a must for the TITAN so it was nice to still be able to do a custom PP with this kitchen
- Sprint Customization forces carrier back to SPCS. Is there any fix?
- additional OEM dialer skins, smart dial, calc (vogue) would be nice to cook with as well
- Some things like "get good" still need to be removed
Looks like the kitchen still needs some work at the moment. Flashing back to DCD 3.0.1
Would you consider swapping out the extended rom driver with the one in no2chem's rom so that the extended rom can be unlocked. Also, does your rom work with wm5torage. If not, could you add an option to swap the memory card driver with a previous version that does work with wm5torage.
Thanks for the great work. I'm already downloading your rom!!!!
- Sprint Customization forces carrier back to SPCS. Is there any fix?
SO could I be using this as a functioning 3.35 Sprint kitchen? That's what I am really in search of... Thanks,
Josh
Juicy47 said:
- Sprint Customization forces carrier back to SPCS. Is there any fix?
Click to expand...
Click to collapse
Should be resolved now. The ROM this was based upon wasn't fully set-up for Telus and still had some of the previous Sprint settings in the OEMOPERATORS folder. That's all history with the use of DCD's selectable carriers. As it appears DCD did with his Sprint and Verizon settings, hopefully all is fine with my reversion from DCD Telus settings to the official operator settings from last summer's Telus WM6 release.
Juicy47 said:
- additional OEM dialer skins, smart dial, calc (vogue) would be nice to cook with as well
Click to expand...
Click to collapse
For now I just wanted to get this out clean and working. I haven't had a chance to test for skins yet.
Juicy47 said:
- Some things like "get good" still need to be removed
Click to expand...
Click to collapse
I was disspointed by that too... Anyone know the names of the associated files?
Juicy47 said:
Looks like the kitchen still needs some work at the moment. Flashing back to DCD 3.0.1
Click to expand...
Click to collapse
Thanks for helping! I'm learning. Now I will get onto last night's odd COM4 mystery with VisualGPSc.
atomclock said:
Would you consider swapping out the extended rom driver with the one in no2chem's rom so that the extended rom can be unlocked. Also, does your rom work with wm5torage.
Click to expand...
Click to collapse
I did consider that but I wanted to keep things as simple as possible. You're welcome to add it.
Keystone said:
I did consider that but I wanted to keep things as simple as possible. You're welcome to add it.
Click to expand...
Click to collapse
I would be happy to make the changes. Would you mind telling me where you learned how to change the .net version from 2 to 3.5. I tried doing this using dog guy's kitchen and the original rom image and while i had limited success it was really only a cludge which is kind of buggy. long story short, i dont know how to modify the underbelly of the rom which wold be necessary to change the drivers. if you can give me a link or a brief explanation of the process then i will be happy to work out the details of this mod.
thanks
atomclock said:
I would be happy to make the changes. Would you mind telling me where you learned how to change the .net version from 2 to 3.5. I tried doing this using dog guy's kitchen and the original rom image and while i had limited success it was really only a cludge which is kind of buggy. long story short, i dont know how to modify the underbelly of the rom which wold be necessary to change the drivers. if you can give me a link or a brief explanation of the process then i will be happy to work out the details of this mod.
thanks
Click to expand...
Click to collapse
I deleted the net directory within the SYS directory. Then I added the PPCGeeks OEM of 3.5 to the OEM directory of the kitchen.
I have since removed it and gone back to 2.0, as 3.5 alone was giving a single odd error of VisualGPSc not being able to recognise COM4 for the internal GPS. I'm not sure if it was the GPS driver, VisualGPSc, etc., that was having the issue but since 2.0 fixed and I didn't know what other problems 3.5 may cause, I've gone back to the .NET settings that Sprint released.
Thanks for the offer for the carriers, but I was quicker than I expected! All done.
As for learning, I began last night at 10 on a whim of wanting a cleaned version of the Sprint WM6 release for myself. I had the weekend free so all last night I went for it.
Keystone said:
I deleted the net directory within the SYS directory. Then I added the PPCGeeks OEM of 3.5 to the OEM directory of the kitchen.
.
Click to expand...
Click to collapse
This is the same thing I did but it causes errors with some .net applications. If you look at DCDs roms, the SYS/NET directory is replaced by a SYS/NET35 directory. (Note, you can't just replace the directory it doesn't work) In other words, he integrates net35 into the rom instead of using an oem. I believe that there is a place where the registry keys are hiding but I can't find them. The only glimpse I have had of these hidden registry keys is when you do a partial build of the rom and then extract the user.hv and default.hv files. Then you can see the registry keys. Unfortunately, modifying the registry keys at that stage of the build is not really practical because it would have to be done every time the rom is built. I was hoping you had done the integration similar DCD and that you might share you knowledge. I have searched and I can not find the information.
Thanks again for you work!
P.S. By the way, if I ever learn how to do this I am planning on modifying a WM5 kitchen with the latest drivers and gps so that I can reduce the memory footprint.
atomclock, I dunno but since I found that .net 3.5 wasn't at fault for the GPS and I haven't crashed other apps, I think that I will leave it in. If people notice problems then it will be a quick change for me to revert back to 2.0 in the kitchen.
We may get word from DCD and others as to what and how things are working for them.
thank you!
d/l now. i have to let the phone charge up a bit and then will try out your rom. What are the advantage of the 3.5 framework again?
I am currently running the factory rom cause dcd's version would not let me connect to the net after a period of time.
Juicy47 said:
Thanks Key... downloading now. I've been looking to cook a custom TELUS ROM with WM6 and drivers that support the new radio.
FIRST IMPRESSIONS:
- Very Speedy ROM overall
- initial free RAM is ~24 as claimed
- I still think an 8MB pagepool is a must for the TITAN so it was nice to still be able to do a custom PP with this kitchen
- Sprint Customization forces carrier back to SPCS. Is there any fix?
- additional OEM dialer skins, smart dial, calc (vogue) would be nice to cook with as well
- Some things like "get good" still need to be removed
Looks like the kitchen still needs some work at the moment. Flashing back to DCD 3.0.1
Click to expand...
Click to collapse
Did you try going over 8MB with the pagepool and see what effect it had on free RAM after bootup? I'm running a 24MB pagepool on a Touch and the larger size makes a world of difference.
atomclock said:
I would be happy to make the changes. Would you mind telling me where you learned how to change the .net version from 2 to 3.5. I tried doing this using dog guy's kitchen and the original rom image and while i had limited success it was really only a cludge which is kind of buggy.
Click to expand...
Click to collapse
I'll soon repost a link to download my v1.2 that uses CF 2.0 rather than 3.5.
Hmm, I keep crashing BuildOS.exe when running the batch. I have all the packages as DCD suggested, and can cook other ROMs just fine.
Any ideas what might cause this?
If there is an NBH file in the RUU folder (from previous cook), that will block the BuildOS. Delete it if it is there.
morganlowe said:
Hmm, I keep crashing BuildOS.exe when running the batch. I have all the packages as DCD suggested, and can cook other ROMs just fine.
Any ideas what might cause this?
Click to expand...
Click to collapse
I'm sorry morgan, but few ideas.
Are you extracting the archive of the kitchen to a fresh folder?
Do you have appropriate security rights for the folders?
Are you running BuildNB.bat intact and unmoved from there?
When does it crash? Upon loading BuildOS or when BuildOS dumps the new OS to its created TEMP directory?
Well, I configured my OEMs, added a few of my own. It's fully extracted in it's own folder inside my 'phone' folder. I have all the rights. I did not change any of the files after unzipping.
It crashes right as I run the batch, when it goes to load buildOS...
http://www.morninglion.com/crash.jpg is a screen shot.
Just a guess, but do you have the latest MS Visual C++ Resdistributable installed?
Yup, and all the latest .nets... I do all my ROM building on this same PC, this is the only one to give me an issue... Maybe it's the mirror I used, let me try another.
I have a fuze and a friend has a sprint touch pro I installed Diamond TF3D Config and it ran fine on my fuze but when trying to run it on the sprint device it spits out an error. I was trying to help him put the flippy clock normal HTC back ground on.
Any ideas on how I can help him work this out?
Thanks
not sure where the threads are but th are tons of them. basically you need to delete the tweaks part of the program. there is a conflict with data type definitions with the sprint phones.
can it be deleted after the program is installed? or does it need to be unpacked removed than repacked?
Thanks
install the program go to the directory and delete twesks.xml
got it thanks!
hondaguyjoe,
How did you change your clock on your Fuze? I just ordered mine and from what I can tell is you just install Diamond TF3D Config and then the desired theme. Is that about right? Thanks in advance.
Justin
craigwillie-
Thanks! Working well on my Sprint Touch Pro after your suggestion to delete the tweaks xml.
-- Andrew
I've searched the board for several hours and have tried every mUn wallpaper on all tabs cabs I can get my hands on.
There are several errors with the cabs.
1. The clock counts up to 12:59 and stops working
2. The carrier shows up as T-Mobile
3. Touchflo3d stops working
4. When I uninstall the cab everything is jumbled up requiring me to reinstall the theme.
ROM Version: 1.05.671.4
Stock Alltel Rom
My theme is currently the HTC Black theme that is pretty commonly used.
I've done a fair share of research but cannot figure this one out. Any tips/advice?
Note that "Mun Background For All" doesn't work well with stock ver. of Manila
Before directly working with manila files in your /Windows dir, first disable TouchFlo from your Today screen.
Start out fresh, navigate to your /Windows Dir and delete all of the Manila files that you see.
Since the original Manila files are on the ROM, after deleting your Manila files, the ones on the rom will be restored.
Note that "Mun Background For All" doesn't work well with stock ver. of Manila
So to get "Mun Background For All" to work use a whole new set of Manila that someone has created, and over write the stock ver.
Thanks - I was able to get it to work with - Juggalo_X Manila With TF3D Landscape.cab
Thanks
wher did you get it this softver ?
some link )
zizizlo said:
wher did you get it this softver ?
some link )
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3395193&postcount=156
Link can be found here. Thanks