I have a fuze and a friend has a sprint touch pro I installed Diamond TF3D Config and it ran fine on my fuze but when trying to run it on the sprint device it spits out an error. I was trying to help him put the flippy clock normal HTC back ground on.
Any ideas on how I can help him work this out?
Thanks
not sure where the threads are but th are tons of them. basically you need to delete the tweaks part of the program. there is a conflict with data type definitions with the sprint phones.
can it be deleted after the program is installed? or does it need to be unpacked removed than repacked?
Thanks
install the program go to the directory and delete twesks.xml
got it thanks!
hondaguyjoe,
How did you change your clock on your Fuze? I just ordered mine and from what I can tell is you just install Diamond TF3D Config and then the desired theme. Is that about right? Thanks in advance.
Justin
craigwillie-
Thanks! Working well on my Sprint Touch Pro after your suggestion to delete the tweaks xml.
-- Andrew
Related
Hi,
I really want to install the Alltel ROM on my Sprint Mogul. I've searched around and didn't come up with anything, so can someone more knowledgeable on the subject tell me if this is a good idea, or if it's begging to have my phone bricked:
I downloaded the Alltel ROM and extracted its NBH contents using nbhextract. The CID is set to ALLTE001.
I also downloaded the newest Sprint ROM and extracted its NBH contents. That one's CID is set to SPCS_001.
Can I use nbhgen to change the CID of the Alltel ROM to Sprint's?
*edit: Nevermind. Gave this a shot and just got an error from RUU.
Um, yeah you will get an error. And, why are you trying this in the first place?
I use Cricket for my service. I've gotten everything except incoming MMS to work, and the problem is with how Sprint's Data Provisioning is nested in the Mogul's Sprint ROM. There are IOTA settings in the registry, but I really have no idea about how to modify them since Cricket doesn't require any data provisioning.
On my 6700, ArcSoft would automatically dial the connection I had specified in the settings when an MMS arrived. Now, it attempts to connect to Power Vision, and I get an IOTA error about how the device failed to connect to Power and I should contact Sprint. I know that the Alltel ROM would not have these problems.
Another idea that I had was to completely replace my current registry with Alltel's (I have a complete dump), but I'm not too sure how to go about doing that, either. When I restore the file with PHM, the Sprint and Alltel settings just coexist with eachother.
If you have any ideas or suggestions here, they'd be appreciated.
my understanding of crickets data services was that they use simple ip and a proxy for http. have you changed the mogul to use simple ip? i think all you really need is a way of stopping an IOTA aka "vision profile update"
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
to0 said:
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
Click to expand...
Click to collapse
delete the guardian file in Windows startup - then delete the IOTA folder - in program files.. this is what I did to make the mogul work on Alltel before they launched the 6800. I also went through the registry and deleted a couple of IOTA registry keys.. I can't remember where they were though.. Finally, I deleted the error 67 notification in the registry and everything worked perfectly..
Now that the Hard SPL for the device is out you can install the alltel rom directly from the exe after the hard spl is installed.
Yeah I got this going a few days ago. MMS is working perfectly now!
I ran Olipro's unlocker and popped the Alltel ROM WITH the ExtROM and everything works WITHOUT any special consideration. You could say that it "worked straight out the box".
Now the qyestions are 1) now that I've unpacked the RUU_signed.nbh, how do I repack it, and 2) where is the extended rom in the unpacked nbh? I guess these are the big questions for getting Mogul kitchens together and cooking ROMs.
Yeah the Alltel ROM is running pretty well. Definitely an improvement over the stock sprint ROM. Not a huge difference, but it's definitely worth the upgrade until we get some ROM Kitchens/Heavily Modified/Improved ROMs.
don't u guys miss java support?
I can't run opera mini anymore once I switched to Alltel...
Install Esmertec Cloudyfa Java it's better than the builtin on Sprint. Saving space if anything
so how do i get the alltel rom on my sprint mogel? if i am with sprint
eakrish said:
so how do i get the alltel rom on my sprint mogel? if i am with sprint
Click to expand...
Click to collapse
go to ppc geeks and check out the 6800 forum.
instructions are at the top.
Is there a memory difference at all between the 2? If so, what is best to go with? What is the advantage to the Alltel one over the Sprint?...Sorry...kinda a n00b...but not really...lol
hate not having mms - flashin alltel now thanks guys!
Hello All,
First off I want to say I have done a lot of searching in this forum and many others concerning my problem. My problem is trying to switch the TF3D theme from the stock verizon theme to the original black. From what I have read, I have been instructed to dl Diamond TF3D Config Setup, which I did many times. It loads successfully, but when I launch the program it gives me an unexpected error message. Does anybody know what is going on and how I can fix it? Does it have to do with it being a verizon phone; ifso, how can I change my theme?
Thanks.
Hello Noobie
Yea you need to delete the tweaks and it should work. You should also switch your roms. Verison software is horrible-by far the worst. Very slow.
Thanks alot. Its just that one file within the cab right? So I would delete this before putting it on my phone and running it?
Also, I really do want to flash the ROM, but I'm still not sure which one to use. Any recommendations? Are they stable enough at least as much as the stock rom? I just don't want to flash a rom with hella stuff on it that takes up memory and compromises stability and reliability.
Thanks again.
You need to install .Net 3.5 in order for Diamond tweaks to work. Search for .net framework 3.5 and install that first.
i already intstalled 3.5. still did not work. but i have not tried deleting the tweak file. im just not sure if ineed to delet on my computer before i move the cab to my phone and run it.
hi guys can any one till me where can i downmoad the full file of .Net 3.5 ? i mean the 37mb file not the 2.6mb from microsoft website. i have internet only in my phone and i ca't have access to pc with internet. so if anyone can till me where to find the full size .net 3.5 to download i will be thankfull
mytheory. said:
i already intstalled 3.5. still did not work. but i have not tried deleting the tweak file. im just not sure if ineed to delet on my computer before i move the cab to my phone and run it.
Click to expand...
Click to collapse
Yeah, after you have it installed, go out and delete that tweak file and it will work like a charm.
jus use tf3d configuration,works all the time for me
Using tweaks
I stumbled across this zip file the other day.If u wana use the tweak just replace the tweaks.xml with this one. Im not sure who credit for this file belongs to. But if it is yours or u know whos it is let me know and i will definitely give credit where it's due.
help with themes
So have i been searching around for a while and have not been able to figure out what the hell i'm doing wrong...
i installed DiamondTF3d conf tool, i downloaded some themes (.cab(s)) but i was not able to find them while going through TF3D config. I'm sure it's something simple i'm not dong, any help would be appreciated.
well the one i used (the Htc black) was a .theme i think
I've searched the board for several hours and have tried every mUn wallpaper on all tabs cabs I can get my hands on.
There are several errors with the cabs.
1. The clock counts up to 12:59 and stops working
2. The carrier shows up as T-Mobile
3. Touchflo3d stops working
4. When I uninstall the cab everything is jumbled up requiring me to reinstall the theme.
ROM Version: 1.05.671.4
Stock Alltel Rom
My theme is currently the HTC Black theme that is pretty commonly used.
I've done a fair share of research but cannot figure this one out. Any tips/advice?
Note that "Mun Background For All" doesn't work well with stock ver. of Manila
Before directly working with manila files in your /Windows dir, first disable TouchFlo from your Today screen.
Start out fresh, navigate to your /Windows Dir and delete all of the Manila files that you see.
Since the original Manila files are on the ROM, after deleting your Manila files, the ones on the rom will be restored.
Note that "Mun Background For All" doesn't work well with stock ver. of Manila
So to get "Mun Background For All" to work use a whole new set of Manila that someone has created, and over write the stock ver.
Thanks - I was able to get it to work with - Juggalo_X Manila With TF3D Landscape.cab
Thanks
wher did you get it this softver ?
some link )
zizizlo said:
wher did you get it this softver ?
some link )
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3395193&postcount=156
Link can be found here. Thanks
I Have The Sprint Version, Stock Rom, HTC Manila.
I Installed Mun Background For All, It Worked But I Didn't Like It After All. I Uninstalled It, Then It All Started.
After Uninstalled, I Had Some Sprint Manila Files Mixed With HTC Manila Files. I Changed All Sprint Ones With HTC's Again But Just Two Wont Cross Over. I'm Using Total Commander To Move Them But Even That Is Telling Me "Cannot Move Files."
What Do I Do???
Please Help.
Thank You,
Rydah805
Before directly working with the files did you first disable TouchFlo from your Today screen?
Because you should be able to navigate to your /Windows Dir and delete all of the Manila files that you see.
Since the original Manila files are on the ROM, after deleting your Manila files, the ones on the rom will be restored.
Note that "Mun Background For All" doesn't work well with stock Sprint or even Verizon Manila and probably many other stock ver.
So to get "Mun Background For All" to work use a whole new set of Manila that someone has created, and over write the stock ver.
Hey all -
If you are looking for build 23025A, please see Post #3.
Here's 23017B. On my initial boot, I have over 29.5 meg free after running Oxios.
WHAT'S NEW IN THIS BUILD:
A new splash screen (thanks to eigerzoom)
Replaced psShutXP with PowerOptions - this has a functioning shutdown feature, and a few other neat tricks
Replaced Oxios Hibernate with the complete Oxios Suite - this also include Oxios Close-Apps, which will free up even more memory (but will close all of your open apps)
DOWNLOAD LINK:
Click here for 23017B (with white taskbar icons)
Click here for 23017B (with a colored taskbar theme)
Here's a list of some of the things I have included:
Memory and battery meter
Updated video drivers
Stock start menu
HTC Task Manager
Advanced Configuration 3.3
Total Commander
nueLED
Oxios Suite (Hibernate and Close-Apps)
PowerOptions
PocketRAR (automatically set as default for .zip and .rar)
AutoRun (UC)
Bluetooth Explorer
Fixed Comm Manager (both in button assignments, and Systems menu)
New splash screens
Built carrier free (see note below)
And a few personal tweaks - skinny scroll bars, ClearType enabled, larger fonts, the old IE set as default, ReplyAll fix and a few other things.
PLEASE NOTE:
This ROM was built carrier free. You MUST install a carrier cab for this to work. Find your carrier cab from here:
Carrier cabs
TO ENABLE MMS:
Here are a few cabs I have found on here and ppcgeeks that should help you enable MMS (multimedia messaging - pictures/video messaging). If any of these do not work, or if you have a better cab or a cab for another carrier, please post your information and I will update the catalog. I cannot vouch whether or not these work and am relying on you to verify. Please make sure you only install the cab designated for your carrier.
MMS cabs
I have also put together a few of my favorite programs that I install afterward to share. Please look through and enjoy!
Ivan's Collection of Handy Programs
Many many thanks to bbsandkm, mattsm, TPlane37, Joojoobee666, the PPCK team, the authors of all of the cabs linked from this post (I take no claim or responsibility for them) and everyone else who helped me along the way.
Click here to chat with us on our IRC Channel if you need immediate assistance.
Any changes either major/minor now that we've moved to the 23xxx build number?
Any fun screenshots or just the same old stuff?
Until I feel these latest builds have become fleshed out enough to become stable, I will keep them here in the third post. Please keep in mind that anything from this post is not entirely functional and meant as a preview only. I recommend having a stable ROM handy to revert back to after you are done testing.
The current build is 23025A. I have 4 different versions available for you. For the most part, the builds include the exact same programs and tweaks as the builds in Post #1. Here are the links and differences:
23025A - white taskbar icons & no HTC Task Manager
23025A - colorful taskbar icons & no HTC Task Manager
23025A - white taskbar icons & yes HTC Task Manager
23025A - colorful taskbar icons & yes HTC Task Manager
Please keep in mind that having the HTC Task Manager in these new builds is a double-edged sword. It works partially, but causes some distortion in the top taskbar; that is why you have the option to use it or not.
btonetbone said:
Hey all - Here's my 23001 build!
Click to expand...
Click to collapse
Good for you Mr boner.
While the chef's keep changing, thankfully they pass along their recipes. So the final meal keeps getting better and better.
Welcome to the cooking club!
Here's my 23003 build! It's includes very similar programs and tweaks from my previous, but I have removed the Adobe PDF Reader. Download, flash and enjoy!
http://www.4shared.com/file/116232830/e9bb90dc/23003-btonetbone.html
PS - I am accepting submissions for additional tweaks and/or splash screens you would like to see in future builds!
i want outlook to have a "Reply" instead of "reply to all" on the bottom left, i had a 6.5 build a few months ago, and it was the "reply to all" which sucks..
thanks
yznhmr said:
i want outlook to have a "Reply" instead of "reply to all" on the bottom left, i had a 6.5 build a few months ago, and it was the "reply to all" which sucks..
thanks
Click to expand...
Click to collapse
I agree it sucks. I'll look into a fix and see what I can do (but I was under the impression it is actually built in to poutlook.exe, so I'm not sure if there is anything that I actually can do).
OK, I fixed the Reply All issue. If you want to replace the left softkey in Outlook from Reply All to simply Reply, it's a simple reg edit that will go into my next ROMs. In the meantime, here's the edit and a cab which will do it for you:
Code:
[HKEY_LOCAL_MACHINE\\Services\OutlookEnhancement]
"Dll"=""
Enjoy!
Good find and good share man! I will be throwing that in as well. Who wants to reply to all lmao. What a dumb feature. I could see if you could select a few messages then click reply all but..
RyanMogul6800 said:
Good find and good share man! I will be throwing that in as well. Who wants to reply to all lmao. What a dumb feature. I could see if you could select a few messages then click reply all but..
Click to expand...
Click to collapse
No problem. I just put this up on my ppcgeeks thread and was going to send you a link. Glad you saw!
Here it is!
23004 - http://www.4shared.com/file/117005703/610b3d4e/23004A-btonetbone.html
I have kept the same programs from 23003, added the ReplyAll fix and added AutoRun (UC).
Enjoy and please post feedback!
Please forgive me if this is a dumb question, I have been searching the forum trying to find out what to do with this .nbh file. But I cant figure it out... I found some things on google but Im not sure and I dont want to brick my phone. please advise.
ouellettesr said:
Please forgive me if this is a dumb question, I have been searching the forum trying to find out what to do with this .nbh file. But I cant figure it out... I found some things on google but Im not sure and I dont want to brick my phone. please advise.
Click to expand...
Click to collapse
No problem. If you have never flashed before, please be sure to read the wiki:
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
It has some fantastic information and will guide you through all the necessary steps to unlock your phone, upgrade the radio (if needed) and load a new ROM.
I have the .nbh named TITAIMG.nbh because that is what's needed for an SD card flash. If you'd prefer to use the ROM Update Utility (available in the link I pasted above), you will need to rename the nbh to RUU_Signed.nbh.
Also, if you are a carrier other than Alltel, you will need to install the proper carrier cab for your provider. You can pick that up from here:
http://dcd1182.n715dp.com/titan/carriers/
Hope that helps!
Ivan
So does this rom that I got at the beginning of this thread have the radio included? If not, which should I get and from where...
I read that thread you sent me to but theres alot of information that just makes me confused.
I have an alltel ppc6800 with WM 6.1 stock. I only want the rom with 6.5 that I found in this thread.
Im not sure what chef is or a kitchen, except for the obvious...
ouellettesr said:
So does this rom that I got at the beginning of this thread have the radio included? If not, which should I get and from where...
I read that thread you sent me to but theres alot of information that just makes me confused.
I have an alltel ppc6800 with WM 6.1 stock. I only want the rom with 6.5 that I found in this thread.
Im not sure what chef is or a kitchen, except for the obvious...
Click to expand...
Click to collapse
First, a "kitchen" is a program used to create ROMs. A "chef" is a person such as myself who uses the kitchen to create ROMs.
Second, custom ROMs do not contain radios. Make sure you have a 3.x radio. Personally, I use the 3.42.50 (the latet radio made available for our phones). You can check your radio version in Start -> Settings -> System -> Device Information. If you need to upgrade your radio, go here and download the latest Alltel ROM (which does contain the radio):
http://www.htc.com/us/SupportDownload.aspx?p_id=63&cat=2&dl_id=114
You will need to re-unlock your phone afterwards.
Third, make sure you understand everything on that wiki I sent. It is extremely important that you understand what you are doing to your phone when you unlock/upgrade. There is the potential for this to either go great and you will be very happy...or for this to not work out well at all and damage your phone if you make mistakes. I'll do what I can to help explain things, but we need to make sure you understand.
Here is another important page to read:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
Also, please note that you will lose all of the data on your phone. Make sure you backup any contacts, calendar items, etc by using available programs. I prefer PimBackup (http://www.dotfred.net/). Also, make sure you have any cabs you may need to re-install your desired programs after upgrading.
I started the Bootloader update utility and now im stuck at the tri-colored screen. it says SPL-2.40.Olipro CPLD-9 the dos window dissapeared at this point...
I read somewhere I need to disable activesyne and run a program ~ http://forum.ppcgeeks.com/showthread.php?t=9229 ~ and that should take care of it but i cant figure out how to disable activesync in vista.
Uh oh....
ouellettesr said:
I started the Bootloader update utility and now im stuck at the tri-colored screen. it says SPL-2.40.Olipro CPLD-9 the dos window dissapeared at this point...
I read somewhere I need to disable activesyne and run a program ~ http://forum.ppcgeeks.com/showthread.php?t=9229 ~ and that should take care of it but i cant figure out how to disable activesync in vista.
Uh oh....
Click to expand...
Click to collapse
That SPL means your phone is unlocked. Congratulations. Now flash the radio (if necessary) or the new ROM. You're on the right track! And don't disable activesync.
Edit - Vista doesn't even have ActiveSync. We Vista users have Windows Mobile Device Center.
I cant get it to go past the tri colored screen though...
I haven't updated my bootloader in almost a year, so I'm a little rusty. But here are a few things to try:
If you are flashing from the USB, take out your SD card. If you are flashing from SD card, take out the USB cord. It's preferable to flash via SD card if you have one that is compatible.
If that doesn't work, what happens when you try to run the exit bootloader program from the thread you linked?
Ok, I figured it out thanks to you. It was just waiting for the new Rom..
Thanks for your help..