Hi masters
I have a qtek ph10b.
its lock on telefonica/movil.
i want to unlock this unit but when i want to conect it with pc using active sync its demand user password.for this i made hardreset(power and press reset button placed in a whole togater) its sterted again and after total calibration its demand user password again.
i am confused please help me.
its rom is 1.14.00
waiting for good response.
thanks in advance.
Related
Hello All,
Something freaky just happend. I was reading a thread about how someone was unable to access his Bootloader after a WM 2003 install and decided to go into Bootloader mode. No problems there, so I did a soft reset to get out of Bootloader mode and Boom! 'Tap here to set up your device' displayed amid the 'Bliss' background.
I had to setup the device from scratch. Luckily not all that much loss of software and I only lost one appointment which I still remember. Can you guys with WM 2003 try it and let me know your results? Please backup your data first!
Thanks
Yep same thing here! i tried it fater upgrading and its just like i did a hard reset...
:?
Same here! :shock:
BTW I'm using a US T-Mobile PPCPE.
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seens to be broken...
It woked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Dear Fabi,
I know it might not be the suitable question, but could you plz tell the exact steps you did that led you to this situation. This is to allow you to get precise help, and to be a learned lesson for the rest of us, coz I was about to upgrade from 3.25 to 4.00.16 but prefered to ask first.
Don't worry, the guys here are way clever and I 'm sure you will get the help very soon ... TKR
Nooo problem. I was about to Sync my XDA via USB Cradle and noticed that my backlight was turned off. Also my Phone was searching for a Network (now I know why... :roll: ). So I thought it might be good to reset that thing..... *aghhhrrrr* That was a big mistake. After the reset I saw the boot screen and the backlight blinking twice. That was all. My Bootloader (5.15) says "GSM Error"... now I'm without Mobile Phone for a while :?
so in other words, 4.00.16 was OK but you screwed up the XDA by just doing a reset while the backlight was off ?? ... I 'm afraid I don't get it :?
Fabi said:
Hi all,
i've got a slight problem with my XDA. After updating to WM 2003 (4.00.16) my GSM (3.23) seems to be broken...
It worked for a while and then out of nowhere. My XDA now wont boot. Th good news is that i can go into the bootloader.
What can i do now? Where can i get a good WM2002 image to put onto my SD Card? I'd appreciate any help!!!
Click to expand...
Click to collapse
Confirming you used the SD card method to upgrade, right!
Also what radio band is or was your XDA set to before the upgrade?
HTH
No I didn't use SD Card to update my XDA. I used The ROM-Kitchen to generate a exe and updated over USB cradle.
Im running my MDA (i don't have a XDA ) on a german GSM 1800. Eplus. It was always set to this option and I never even tried to change it.
@biso007:
I screwed my MDA because I did a reset. Thats right. But I had some backlight issues in the past few days after upgrading. The backlight sometimes turned off and there was no chance to get it back on... only a reset. I first thought the proplem occured again yesterday but then i saw that my MDA was looking for network. After resetting the GSM part was dead....!
So back to my problem. I now ordered a SD Card Reader/writer. Is it possible to resore my system via XDArit and a backup? Can someone provide me a working 2002 backup from boot, OS and GSM part? Or can I do this by myself. I really appreciate your help!! Thanks a lot.
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
and yes its possible to restore your system via XDArit and a backup.
As far a the 2002 PPCPE ROM goes you should be able to download it from T-Mobile, so visit their web site and search their MDA upgrade/download section.
HTH
Qman said:
Ok I see!
Do this then press the green phone button, tools, Options, Band
and post whats listed.
HTH
Click to expand...
Click to collapse
My MDA does not boot anymore! I can't get into windows and i can't sync anymore! I have the Radiostack and the 2002 image fram the T-Mobile Website but the image ist a NK.nbf. AFAIK XDArit needs *.nb1 Files? I also noticed that it seems not possible to write the GSM Part to the phone via XDArit.
Hiya Folks
I wonder if you could helpme with a bit of a problem, i have recently attempted to upgrade my XDA using the reccommended downloads from O2, this upgraded my ROM and the GSM part of the XDA. however when trying to get into my XDA it freezes, i can get into the bootloader but get a GSM error, am i able to flash the GSM, if so where can i get the flash and how would i carry this out. i have got into the GSM part of the bootloader and the GSM will not turn on. i have tried copying the GSM from a friends XDA only to find the message "please connect to RS232 and run PC monitor now"
Hope you can help
Cheers guys, you are truly more useful than the folks who we obviously look up to at O2!!!! Mind you this does not say much!!
Thanks again
Dave
where can i find the wm 2003 upgrade file for qtek 1010
where can i find the wm 2003 upgrade file for qtek 1010.
plz can any body reply to me at [email protected]
i want to upgrade my qtek1010 2002 wm to 2003 but could not find it .
can any body reply to me at my email
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
Hi All, Please please could anyone help me I have just tried to update my xda2 with the o2 update software (latest) and all the screen will display is serial v1.6, I cant do any reset Hard or Soft!! Should I buy a body bad and call the undertaker?
Let it on the craddle and start to update it again!!!
Hi, I tried that and get ERROR 100 Message?
Thanks
sorry, bro !,
but from where you have tried to update software latest from 02??. (website)
thanks
ajong
Hi Yeah from o2 UK.........
Thanks for your reply
still problem bro ???
try this :
- push together (power+navikey+reset)
-put your device in to cradle
-start upgrade again (from original 02 rom)
- wait 2-3 minutes.
hope this helps !!
-------------------
which one version to upgrade !!
1.60.50 ???
@soulexpress: Don't forget to kill activesync before yoy retry the update.
Does the 'serial' change into 'usb' when the device is in the cradle?
Hi
Just had to hard reset my XDA II as it died and wouldnt respond. I have the message above.
If I put it in the cradle, it says ' USB v1.01' if I take it out it says 'serial' other than that I cannot get it to do anything!
HELP!!!!!!!!!!!!!!!!!!!!
thanks
rich
mmm, seems youre in bootloader mode.
Only way out I know of is to reflash the device.
Dont forget to kill activesync before you do that btw
ok - thanks
but i dont understand, if i download the rom to my pc, surely i need activesync connected to transfer the file to the xda?
what do you mean by kill it?
also what version should i download?
sorry for my lack of pc skills1
cheers
rich
The upgrade package takes care of communicating with the device.
Activesync is not used and would only interfere.
To kill it: ctrl-alt-del, then end "wincemanager.exe" (not exactly sure of the name) process.
The rom you should use is preferable one of your current supplier: 02, T-Mobile, Qtek or CDL (iMate).
I would advise a non-beta 1.72 rom
These are officially available for iMate and QTek devices (search on RUU172*).
I created a good (to me!) 1.72 rom for T_Mobile devices, search on RUU172901*
Is it worth upgrading
I am running 1.60.00WWE on my XDAII is there any real advantage of upgrading to 1.72 ? What are the advantages?? If so which should I use? I Swapped over to the TMobile one a while and I believe it is difficult to change back to the O2 version, have you any comments?
Thanks Adam
Is it worth upgrading
I am running 1.60.00WWE on my XDAII is there any real advantage of upgrading to 1.72 ? What are the advantages?? If so which should I use? I Swapped over to the TMobile one a while and I believe it is difficult to change back to the O2 version, have you any comments?
Thanks Adam
£50
Money
£50.00?
What's going on?
you wouldn't get that for your body!!!
??????????????????????
MY Hermes was dead after upgrad to WM6 PRO 3.54c ROM
--------------------------------------------------------------------------------
Please help!
i upgraded my hermes to WM6 PRO 3.54c ROM. the phone operated well in the begining. however, when i was access the Today Music Plug-in, the phone was reboot by itself then could not entry wm 6 again (can not pass the wm6 green page and reboot and reboot again)
please help me
Hi,
The same thing happened to me with 3.43c. The only way I got passed the WM screen was to hard reset it. Give that a go and see if it helps.
Cheers
Subzuk
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
siulung said:
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
Click to expand...
Click to collapse
Why not try to reflash the OS again?
read the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
Hi siulung,
I believe that you do this by pressing both of the soft keys to the left and right of under the screen and press reset.
Cheers
Subzuk
Siulung,
I would not do any more until you have done a serious amount of reading. The wiki link in the previous post is a good start.
Good luck.
WB
hi,
i solve my Hermes problem by hard reset it again
thank you for your help
siulung