Related
before i buy jabra 250 . is it work well with pda2k now after the new rom????
also do you have something better than jabra?
jabra 250
no good 4 a xda2
jabra also confirm this if asked
so which bluetooth headset is best ?
Sony Ericsson Akono HBH-300 ok ?
Mine works faultlessly with my XDAII.
Mine works, but there is no actual handsfree. i.e. you cannot do a last number redial, as with the wired headphones, so I presume it is not legal to use in UK when driving?
When you ring someone there is a second delay then the XDA transfers the call to the headset. When you recieve a call you have to press the answer but on the headset then it is transfered. You don't get it ringing in your ear. Well mine doesn't.:-(
Regards
I get ringing in my ear with mine and no dely when transferring.
I can confirm that only answering and ending calls work. There is no dialing on LNR.
Headset
I have a blue angel ( SX-66) and neither my BT200 or 250 work with it....
The Stack is too old as well so my BT keyboard will not work either !
Stay away from Jabra 250 on these phones. Jabra 200 *might* be ok.
HBH-300, HBH-660, Plantronics M3000, Logitech Freedom are few that work well.
HS820 will work but audio is poor compared to above head sets.
You can patch that SX66 with i-mate patches.
Hard Reset and apply these in this order.
OEM_WWE_124_008.sa.CAB
OEM_Patche_12100401.sa.CAB
http://www.blueridge.net/dereck/bt/PDA2k_Bluetooth_Fix.CAB (same as OEM_WWE_124_008.sa.CAB)
http://forum.xda-developers.com/download.php?id=2306
Here is some commentary from Tech Support. Does this make any sense?
Dear Sir.
Thank you for writing in and for your query. Regarding your issue, I would like to tell you that you should install the Bluetooth patches after upgrading your device in order to fix the device Bluetooth issues. On the other hand, regarding Bluetooth headsets, Sony Ericsson HBH-65, Cellink, Jabra and Motorola headsets work perfectly with i-mate devices. Most of these headsets have been tested by i-mate technical team. There have not been any reported complaints regarding these headsets as they are quite compatible and error free with the i-mate™ devices.
Regarding Plantronics M3000 Bluetooth headset have not been tested yet from i-mate technical team.
On the other hand, make sure that your headset has the following specifications: Bluetooth Ser. Version 1.1 and supports the headset profile.
I brought a jabra 250 and didn't know it had problems with this device 100$ later I reallized that it doesn't work it pairs and I can hear people but if I am more than 2 feet from the phone the audio become muffled.
my coworker has a nokia headset. and the same thing happened.
I am not sure what my bluetooth version is but I I do have the latest roms.
Hi,
I have the Jabra BT200 with the non bluetooth adapter and I get more crackle in my ear that I get out of my bowl of Rice Krispies! And there is no point in using the adapter with it when the headset is bluetooth and is supposed to work with my MDA III. Oh! and for the record... I also have the SX56 and the bluetooth adapter and it didn't work with that device either. When I plugged it in the jack and turn on the set , no sound. Jabra is a decent product. But lets face it, Any company that is going to make anything or install anything Bluetooth need to stick with one set of Bluetooh frequency protocols instead of trying to make it customized to work with just certain devices. Because everybody is not going to stick with the same headset or the same phone and people upgrade all the time and others just stick with what works. In my research I did fine that any of the Plantronics headsets (M2500 best pick) works well. Which I will pick up this weekend. I hope this helps. Cheers everyone.
Shane
using a bt200
I'm using a blue angel (XDA2s) with a Jabra BT200 headset, I have installed the recently released patch from o2 to fix the bluetooth problems, and now I find it works ok, audio is reasonable withing a couple metres, gets a bit flaky further away but I'm never sure if that's the bluetooth or network signal in my house!
It IS slightly annoying that you can't do dialing, not even last number redial from your headset, but mostly if I'm driving I'm not making calls, merely expecting them, so I can answer on my headset OK and talk to the caller. I DO get a short ring tone in my ear (series of short beeps).
I got my headset free with my phone so I'm happy to live with it's limitations til I've finished paying for Xmas, then I might ebay it and buy an officially supported one which I can do LNR with.
I have heard (dont know if anyone can confirm) that the blue angel doesnt support voice dialling via your headset (for any bt headset) as the bluetooth headset doesnt take over the microsoft for all applications on the blueangel.
Jabra FS-258 (Jabra 250 + car charger)
No problems here (crackle) after upgrading to the 3500 stack. Making voice commands isn't the fault of the gadget -- blame the stack on the XDA. Originally bought mine for the SE T68i and it worked perfect. Moving to the SE K700i the call button didn't work anymore. So, this is a software driver implementation problem definitely. The best thing about the Jabra is its linked to all the previous devices and I just have to turn off the bluetooth on one so the connection hops to the other. Seamless integration with the XDA IIs.
My Jabra 250 works perfectly on my the XDA II and my XDA IIs. On the IIs i do get some crackle/static related to the bad stack especially so after the 3500 update but hopefully that will be fixed soon, anyway that is no fault of the headset.
Also on the IIs it is extremely loud and i had to turn it down. I always had it on full on the II.
On both II and IIs there is a ringing in the headset aswell as the devices ringing.
It is a shame that handsfree is not fully supported still in the new IIs.
o2 don't like making it easy to find out about compatability, do they?
There's the list on the my-xda website, but that's not very exhaustive.
Muggins here phoned up customer services trying to find out whether the Logitech stuff worked. After taking me through security, I got another number...
...which was engaged for 20 minutes.
So, eventually I got thru, and was told to phone customer services (on a different number) and ask for data support.
I got through there. "Nick", a helpful chap, then passed me onto tech support.
Tech support insist that the only things that work are the:
SonyEricsson HBH200 and 65, and the Nokia HS 4W, 3W, HD W3 and W2.
I suspect they are talking what is known technically as "balls".
This site seems much more helpful...
Any recommendations or ones to avoid?
I think I'll need one for when I'm driving.
OR do I actually need one? Do the supplied headphones do a good enough job?
Thanks
Bill
billuk said:
Any recommendations or ones to avoid?
I think I'll need one for when I'm driving.
OR do I actually need one? Do the supplied headphones do a good enough job?
Thanks
Bill
Click to expand...
Click to collapse
I have a Jabra 620BT, it works perfectly with the TyTN, and it has also a small display that shows the number of the caller, so you can keep it in the cas!
may be worth waiting for this
link
daddyo said:
may be worth waiting for this
link
Click to expand...
Click to collapse
Most of thge mobile bluetooth headset are manifactued by jabra anyhow
this is very similar
http://www.jabra.com/JabraCMS/EM/EN/MainMenu/Products/WirelessHeadsets/JabraJX10/JabraJX10
and this is the best
http://www.jabra.com/JabraCMS/EM/EN/MainMenu/Products/WirelessHeadsets/JabraBT800/JabraBT800
if you like earbuds, the hbh-ds970's work perfectly with A2DP.
Switches effortlessy between phone calls and conduits pocketplayer, very good quality sound.
Minor drawback -- have noticed infrequent 1-second hangs, but seems to be related to mailbox access intervals.
cheers
Problem using handsfree
Hello! I am using a Nokia handsfree (from my old phone!) connected to a TyTN. The problem is that it's not handy at all. When using the Nokia 6310i phone I could do the following:
- press the headset button and wait for a BEEP
- say a name and hear the headset repeating that name
- the phone started to call that person
When using the TyTN things changed. If I'm trying to follow the same three steps, I get the following:
- press the headset button (nothing happens and only after a few tries I hear a BEEP on the TyTN, not in the headset)
- I don't know when to say a name if the TyTN is far away from me because I can't hear the BEEP
- when I say that name it looks like the TyTN is not "listening" for what I'm saying in the headset but it uses it's own microphone instead
- when the conversation starts everything works ok
Imagine that all this is quite annoying when driving. Anyone ever had similar problems?
Re: Handsfree problem
Same here Innov. For voice dialing the Sony Ericsson HBH-30 worked as you describe with my Sony Ericsson T39m, except there were 3 beeps before I had to say the name. With the TyTN, after pairing apparently succesfully, the HBH-30 never stops beeping!
So only certain bluetooth headsets are compatible with the TyTN?
:?
I use the Nextlink Bluespoon AX2 - only 10g, sits inside your ear and great quality. Boasts up to 1500 hours standbye too! Pics/review on my website... http://rakh1.homeip.net Cost is just over £25 from mobilefun - not bad considering the original AX was nearly £100!!!
I use the Motorola H700 and have also used the Motorola HS850 both work really well and initiate MS Voice Command reliably for driving.
Software or headset?
Sorry, but I really don't think that the solution to this problem is in the headset that you are using. I believe that what I need is a software for my TyTN with Windows Mobile 5. The fact that the TyTN only starts to use the hands-free's microphone and speaker AFTER the conversation has started (and not before, in order to be able to use the voice dialing) proves that what I need is some piece of software for my PDA.
Another example. If I use my hands-free with another mobile phone it works ok, but the sounds that I hear when it asks me for a name to call are different. Because they come from the mobile phone to the hands-free.
Any ideas of such a software?
Hi,
I want a headset for my Wizard that meet the following requirements:
1. SUPER sound quality.
2. 2.5mm jack - I don't want an adapter.
3. Prefered Mic.
4. Prefered Volume control.
Can anybody post any useful items??
P.S. : Does anybody sell original Wizard headsets with Mic (mine is O2 Branded and I live in the UK)????
Thanks,
Mohammad
i have a nokia hs-16 headset and i'm very enjoy it hs-16 has three different cable to connect to 3,5mm, 2,5mm and 2,5mm nokia jack. i used a 2,5mm nokia cable and mic works good with my wizard it only doesn't have volume control...
ps. sound quality is very good for me
Hey, Thanks
How does the sound quality compare to the original headset? and Where from did you buy it?
Cheers
well stupid answer, but have you not just tried the o2 shop mohammed, thats where i got my last one from, about four months ago
No, I haven't. but I will give it a try and repost the result here.
Cheers
well, I searched in O2 UK shop but I found only blueooth headsets for Wizard, can you provide me a link for the ones you got?
Thanks
Mohammad
i never found mine online, i went into the o2 store, i have checked online and ,like you , have only found bluetooth headsets. I have found a link here though
http://www.mobilefun.co.uk/product/10097.htm
it isnt the original o2 one, but it is Genuine i-mate JAM Stereo Personal Handsfree Kit
Yes, I've seen it.. I even found the original O2 ones, but the link is in my other computer..
but I am now searching for a Super quality 2.5mm headsets..
The only thing I saw in the market was the miniBuds Boxwave's headsets, but I don't know if anybody tried them?? are there any other brands?
I have a T-Mobile MDA and my headphones went dead a month or two ago. I just bought a replacement from e-bay. A simple search will bring many results. I think I paid about $5.
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I bought from a seller called sami809
HS-47
I've just bought a Nokia stereo headset HS-47. It has a 2.5 mm jack, so I one can use it without adapter. The microphone and the answer button both do there job, but there is no volume control. The quality of the equipment is good, but the sound quality isn't that good. For a super sound I think you have to buy a HS-16.
bought what a seller told was an ome headset. got questions: im i suppose to hear from both left and right ear buds, and im i suppose to able to end or start accept call with the button next to the volume button onthe headset. wonder if i have open circuits on the headset jack on my wizard.
If you have the right headset, then you are supposed to hear from both left and right ear buds, answer incoming calls and end conversation by pressing the button next to the volume control.
If these are not the case, it doesn't necessarily mean that something is wrong with your phone or the headset. It might be that they are not compatible. That would mean the one you got isn't an OEM piece, or maybe it's OEM, but intended for a different device.
answer
collwatt said:
bought what a seller told was an ome headset. got questions: im i suppose to hear from both left and right ear buds, and im i suppose to able to end or start accept call with the button next to the volume button onthe headset. wonder if i have open circuits on the headset jack on my wizard.
Click to expand...
Click to collapse
Maybe the headset is the wrong color, no wait I know your phone hates you and is secretly plotting to drive you mad and have you committed to an insane asylem and then join with my phone in its plot to take over the world. or it could just be as simple as there is something wrong with the headset who knows about these things??
i would expect such flaming wise crack from a senior memeber ; )
is it possible for incomng/outgoing calls to use the same bluetooth earpiece with two devices?
if so... what brand should i get?
the two devices are a Blackstone and a Polaris.
Thats a question I would love an answer to. So far the onlt bluetooth device that i've found to do this is the Jabra BT8040. I own one and it works as advertised though with some bugs....
TechAnimal
what kind of bugs?
An example, when you're in a call with one phone and the other rings, it switches to the ringing phone without you answering, which leaves the person you were speaking to wondering what the heck happened.
TechAnimal
I could live with that... I just switch one off =)). Kidding now... it's rather rare when this happends. Just that I can't find the earpiece here... i searched each romanian online store... nothing
istoica said:
is it possible for incoming/outgoing calls to use the same bluetooth earpiece with two devices?
if so... what brand should i get?
the two devices are a Blackstone and a Polaris.
Click to expand...
Click to collapse
Sure, it is called BlueAnt and I have two of them. Both the black color and the red color. Couldn't decide which one to get, so went for both colors.
However, one is sufficient!
The z9i:
http://www.myblueant.com/z9i_headset.htm
Since then they have come out with a newer model called V1, which has voice command build into the bluetooth.
http://www.myblueant.com/v1_voice_control.htm
I paid $75 each for the z9i year ago, they are now less than $40 each .
KOR!
Also, they give you a cable for firmware upgrade. When I bough mine it had v1.0 firmware on them, since then I have upgraded to v1.1
KOR!
istoica said:
I could live with that... I just switch one off =)). Kidding now... it's rather rare when this happends. Just that I can't find the earpiece here... i searched each romanian online store... nothing
Click to expand...
Click to collapse
this is the head set that I use with my Trinity and my Breeze:
http://www.plantronics.com/north_america/en_US/products/mobile/bluetooth-headsets/voyager-815
and you can find it in romania too.
Jabr BT8010 can do it as well. I own one and its a pretty cool peace of toy. Especially to see on the screen of the headset who is calling and that you can even dial with this headset names from your phoneboock is very convinient. I dont want to miss it anymore.
bh10mjr
Thanks a lot! I found it at a good price here which is awsome.
Multumesc!
was my pleasure to help you.
I did buy it from vodafone, on points (was free for me)
you can try in there if you have some points.
SE HBH-DS980 works fine with two devices.
gentillo
too many wires I already ordered the plantronics earpiece. as soon as it arrives i'll let you know how it works.
it arrived
While on vacation, the earpiece arrived.
+ good sound quality
+ easy pairing
+ it pairs to more than two devices
+ accessories (it was shipped with different earbugs and earloops, to fit more customers)
= battery life
- small range: if more than 5 meters (even with direct line of sight) the call could be considered as dropped
- no car charger or USB charger in the package (uses proprietary charging socket)
I'd say it's a 8/10.
bh10mjr said:
this is the head set that I use with my Trinity and my Breeze:
http://www.plantronics.com/north_america/en_US/products/mobile/bluetooth-headsets/voyager-815
and you can find it in romania too.
Click to expand...
Click to collapse
Eh?! What the deuce? I use this headset every day but never knew you can get dual connections on it?
Are you sure you don't mean multiple PAIRING? I haven't seen a headset (other than dodgy $5 nobrand ones) that can't multi-pair, it's pretty much a prerequisite of any bluetooth headsets to even make it to market these days.
But being able to connect to more than 1 host device is the challenge here...eg: listening to music via A2DP on the Blackstone and have my music automatically pause to answer a call coming in a Trinity for example...and vice versa... and if I press the voice command button, which phone does it issue the voice command to... etc..
plantronics voyager 520 with noise canceling
Hi guys, anyone here encountered this issue of a non-stereo headset (mine is an SE HBH PV705) that while playing music/audios, it would cutoff from the headset and play through the ppc-speaker at every 4-5 mins.?? Each time I'll have to press the headset button to resume listening through the headset.
...I've never had this issue with my WM5 ppc with the same headset - I can listen through the headset for hours even w/o any interruptions.
...solved.
For in car use both Nexus and Movon have products that do this - both available from amazon.co.uk or were last time I looked:
http://www.maplin.co.uk/Module.aspx?ModuleNo=227944&C=AffilWin89477&T=41513_
http://www.amazon.co.uk/Movon-MK30-Bluetooth-Hands-Free-Car/dp/B001EKMRVU
Jabra BT 8010 or 8040 do the job well with the glitches already mentioned with simultaneous calls. They have "multipoint technology" that is they poll both the handsets alternately making both think that have an individual headset paired.
I had problem with 8040 due to sweating. Sweat like hell.. and they are NOT water resistant, something you need to keep in mind if u are planning to get one.
2 devices, one headset
Yes, I also have the problem. I got a headset which can connect two mobiles, both are Nokia but I can't do that with one PPC phone and one Nokia?
What wrong or may be some setting on PPC need?
Thanks
I apologize for my English. Translated from Google.
Tell me how to solve small problem. The essence is as follows:
Presented with a headset on the iPhone 4, while listening to music and watching videos, sound is muffled. If you press and hold (!), The Play button on the headset the sound is normal. In another Nexus One, and he has them working properly. In what may be the problem? How to decide? Interestingly, once already tested the sound quality of these headphones, and it was not.
http://androidforums.com/sony-erics...0-headset-issue-problem-norm.html#post2675162
It's the way it is made.
iPhone is not built the same way the x10 headphone jack is
But I had included, works fine.
Maybe you didn't read what I posted.
Simple answer for the issue. Sony does things their way, while everyone else caters to the iPhone industry.
Headphones w/ mics have a male plug have 4 pins.....both Sony and iPhone, the first 2 pins are the same, but the 2nd two are different.
Pressing the answer button on the headset connects rings 3 & 4 on both headsets. (Which, in effect is the same as a listening only headset.)
Either use headphones without a mic (for music) or use a bluetooth headset (for phone) or use the Sony headset that came with the phone or visit the Sony store.
beau420 said:
Maybe you didn't read what I posted.
Click to expand...
Click to collapse
I read your message. And I can not understand why, then, to work? May be the case even in the firmware? Now is not the official 2.2.1
I heard that it happens only on headphones with mic, so I just taped the answer button on controller and they work fine You can also try some adapters from ebay or some similar pages...