my atom pure's touchscreen is totally not functioning. tried to upgrade different roms but still no help. so i buy a touchscreen replacement and send it to somebody who can fit it on. the touchscreen replacement fits well but the problem is when im on the screen alignment program, point tapping dont end!! i meant the alignment process never ends. i installed a registry editor so that i can edit the touch settings value. but since the screen is not aligned cant use the virtual keyboad to input the necessary value. so i need the help of chefs here to apply my idea. is it posibble to cooked the correct alignment value on rom and at the same time skipping the alignment screen after a had reset just like what we have on some of hermes rom? if this proceedure is already implemented please send me a link of that rom so that i could try it coz i have a feeling that it will solve my problem.
thanks a lot more power
Related
Hi,
I got an O2 Comet (Atom Live). Also got a protective film on the touch screen.
Now the pressure needed to use the touch screen is quite high in my opinion.
Is it possible to tweak/change the threshold value for the touch screen via registry tweaks etc. ? Or is the touch screen sensitivity for the Atom Life not changeable?
I got Medkid's Atom Life WM6.1 ROM installed btw.
Thx for any help,
boba
Have you tried this??
HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\Touch
or find 'Threshold'
Change the value of Pressure Threshold.(INCREASE value ONLY!!!)
Example, just set the value at 11880.
That doesn't exist in the registry
Any other suggestions?
Try and see if its in there,
HKEY_LOCAL_MACHINE\Drivers\TouchPanel
What registry editor are you using?
Search your registry for DWORD, "PressureThreshold".
Nope its not there I'm using resco registry editor
Ok download the registry editor below and install it. (phone or storage card it doesn't matter)
Run the app and it should start something like this...
SCREENSHOT_1
Make sure you highlight HKEY_Local_Machine like in the photo otherwise it won't search correctly
SCREENSHOT_2
Now click on "FIND"
SCREENSHOT_3
Copy what you see in the photo onto your phone and click "FIND NEXT"
SCREENSHOT_4
And it should come up with something, if not I don't know what to tell you the instructions I have given are as handicapped as possible.
SCREENSHOT_5
Hi, thanks for the help. It couldn't find the key either. I don't think atom life phones have this key. Are you using an atom life under WM6 too?
no, but there are plenty of posts where people have done it.
That posts I have read reference different registry locations, so I assume that the pressure configuration is set by each manufacturer.
Hi guys! Does anybody know where I have to put my hands in the registry to set as default this ClassID??
And does anybody know which is the classid for the phone pad?
I had a look in the wiki but nothing interesting for raphael and WM 6.1.
I only need the registry keys and where to put these keys in order to have the phone pad as default after every soft reset and by default in my rom (so after every hard reset).
Thank u guys if u can help me to do this!
Any help guys? Incredible, is there really no solution?????
My new HTC S740 is excellent except for one thing - the keypad backlight goes out after only 15 seconds. Very irritating in the dark.
I've looked for kb_light_timeout in hklm/software/htc/keypad but this does not exist.
I've found keylight timeout and qkeyledtimeout in hkcu/control panel/backlight which looks like the right place but altering values and rebooting makes no difference.
I've also looked in hklm/drivers/builtin/keylight and keypad.
I feel I'm very close. Can anyone help?
Yes Its most annoying as well as fact that only numbers or keys round circular button light seperately. Look forward to someone cracking it. Otherwise an excellent phone.
I agree, this is very annoying.
So theres no fix for this issue? To bad no ACT for this phone. An awesome phone, just wm standard gets so little love it seems.
I did some research today and he're the results:
1. This is far of to be a new issue. First complaints about the keyboard backlight timeout you can find under Qtek models...
2. Apparently, they were just few (2-3?) HTC models supporting a registry entry included in WM hkcu/control panel/backlight/QKeyLedTimeout - Rose definitely doesn't
3. The issue could be a case of WM 6.1 limitation - Rose has in fact three keyboard backlight arrays with separate light managements (soft keys, numeric, QWERTY - try to use them simultaneusly and you will see - their timing is independent on each other) and I've found some extra HTC registry entries concerning power management confirming a bit non-standard settings. Unluckily, nothing useful there for the kb backlights.
Sorry, based on my experiments, I can advice you only one very strange way how to overcome it for now: Limit the display timeout to the same 10 seconds as the keyboard has. At least, first press of any key will become inactive and just light-up both display and keyboard. Until display works, all keys are still active even the keybord backlight is off.
Nevertheless, any opposite finding will be appreciated...
Thank you for your investigation
I have a new s743 and this is the exact problem I came searching for fix for!
Too bad - it really is a sweet phone.
-John
To me this is a winmo thing. I don't understand why this option isn't included from the factory. It is a plain "NO BRAINER"! It's been this way on all my previous devices whether pro or standard. The diff being the pro os has wonderful tweaks and various cabs one can install to set the time out. What we need is to get some tweaking guru to set up something like ACT for standard. Problem is so little love for the standard os. The screens are to small anyway for my taste. I'll just stick to pro, the tweaks are better.
Well, i set the display timeout on my device to 5 seconds. Backlight of the qwerty and numeric keypads went off after 5 seconds.
The softkeys remained lit till 10 seconds was up.
sir/mam
my dual cam has a wrong touch alignment
is it lcd touch or the program??
pls help
Are you able to realign it using the Screen control panel?
The only way to tell if it's software is to do a hard reset or may even flash an alternative ROM (depending on your circumstances).
If nothing works then it's a hardware fault.
awts is it possible
ok sir
thnx to ur concern
SALAMAT-thnx hehe
Windows Mobile Version: 6.5
Manila Version: 2.5.20181527.0
ROM Version: 3.14.405.2 (04666) WWE
Hi, bought my HD 2 a week ago and every time I am in an active call the touch screen buttons don't seem to function. Specifically, the 'end call' touch screen button, menu buttons etc. The hardware buttons work fine, which is why I end the call using the end call hardware button.
Outside of an active call, the touch screen buttons work fine. Just seems to be during an active call.
Was wondering if there's any help on this. Seems to be like there's not a fault, but more like a restriction or something stopping the touch screen buttons from being able to function when in an active call. However, I'm a new HD 2 user so I am slightly inexperienced as to what to do.
Further info can be given if needed. Thanks and any help is appreciated
I have exactly the same problem after I installed ROM 3,14. After some tests, I found out, that the screen buttons are working if you hold and swipe carefully, but they are very unresponsive. I think there should be a registry tweak available for this - I tried to find hints in the XDA forums without any luck. Anyone could help?
I have the same problem with all of the 3.14 based roms too.Is there any help to solve this massive problem?
alijani said:
I have the same problem with all of the 3.14 based roms too.Is there any help to solve this massive problem?
Click to expand...
Click to collapse
I think I just found the solution - at least it worked for me...
Have you done the registry tweak #44 from the registry tweak thread? If yes, revert back, and voila, problem solved. I copy here for reference:
"44. Prevent Accidental Link Activation When Scrolling
Do you scroll and find you accidentally click on something? This tweak is for you. Note: Can cause problems for some so remember original value in case to revert back. Note: for some, users cannot tap on screen buttons during a call. Revert to original reg entry if this is the case.
HKLM/System/GWE/Touch/Filter/Minimumtaptime
Change from 0 to 30"