my atom pure's touchscreen is totally not functioning. tried to upgrade different roms but still no help. so i buy a touchscreen replacement and send it to somebody who can fit it on. the touchscreen replacement fits well but the problem is when im on the screen alignment program, point tapping dont end!! i meant the alignment process never ends. i installed a registry editor so that i can edit the touch settings value. but since the screen is not aligned cant use the virtual keyboad to input the necessary value. so i need the help of chefs here to apply my idea. is it posibble to cooked the correct alignment value on rom and at the same time skipping the alignment screen after a had reset just like what we have on some of hermes rom? if this proceedure is already implemented please send me a link of that rom so that i could try it coz i have a feeling that it will solve my problem.
thanks a lot more power
I dont have this phone anymore
mods please delete/lock this thread thanks
hold the navi button and press the camera button to get the calibration screen up
ducamie said:
hold the navi button and press the camera button to get the calibration screen up
Click to expand...
Click to collapse
hiya its not that i need to calabrate ... it seems like a hardware fault ..but titanium doesnt seem to be working properly.. like its not showing up correctly ...so do i need to change the rom ...
or is there a simple way i could open up the phone and re allign the screen ? something like that..
liam12189 said:
hiya its not that i need to calabrate ... it seems like a hardware fault ..but titanium doesnt seem to be working properly.. like its not showing up correctly ...so do i need to change the rom ...
or is there a simple way i could open up the phone and re allign the screen ? something like that..
Click to expand...
Click to collapse
Hardware errors is best sent back to manufacturer to fix.
rling said:
Hardware errors is best sent back to manufacturer to fix.
Click to expand...
Click to collapse
not on warrenty.. unfortuantly .. if this was to be put on ebay as faulty what price could i get max and min
Hello,, how can i fix my htc with a dark screen?? i have tried too flash it. but that dosent work! what can help mee??
It works but it is almost impossible to see the screen??
If u flashed a new rom and the problem persists, it's probably some hardware issue and it needs repair, but, if u haven't done yet, try going to power management and set the backlight brightness adjustment to a fixed value instead of auto.
Elusivo said:
If u flashed a new rom and the problem persists, it's probably some hardware issue and it needs repair, but, if u haven't done yet, try going to power management and set the backlight brightness adjustment to a fixed value instead of auto.
Click to expand...
Click to collapse
i hav e tried too flash it and set the baklights brightness adjusments on manual but it stil dont works : o do u have any other tips??
Even I am facing the same issue. Did anybody get a fix to this solution.
After hard resetting the device, the screen has gone dark. I can see the phone working and also the menus, but since there is no backlight, its barely visible even inside the house. tried setting the backlight from Power adjustment menu, still no use.
Any help on this would be great.
Thanks
I had the same problem.I was taking a great care of my rose,I was overprotected with it,it was in perfect condition untill one day I wanted to sell it here and the next days the screen became dark for no reason.It really dissapointed me.I tried many things but nothing helped...it was 99% a hardware problem..I don't know what is wrong with these phones...anyway in the end I sold it on eBay..my suggestion is to try and replace the screen or just sell it...
To the people of Turl's and Jokersax' CM9.
I have a touchscreen re-calibration app, I just tested it out and it seems to be working perfect. Don't hold me to it, but i think this is a pretty good temporary fix.
I'd love feedback, i didn't code this but after a few searches i was able to realize this is a universal fix for touchscreens that have been acting up.
Special thanks to gojimi. At least i hope.
Can you link the source please.
Cheers!
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
helmy96 said:
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
Click to expand...
Click to collapse
Sometimes, it will act up.
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
helmy96 said:
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
Click to expand...
Click to collapse
I know what you mean, sometimes homework takes away most of my time too. But just use CM9 as your daily driver, and you'll be well informed on any issues that will occur.
This actually screwed up my touchscreen..anyway to uninstall?
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
David Guillot said:
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
Click to expand...
Click to collapse
You are not the one who have this problem I had nottachtrix at first and touchscreen was working well when I instal MIUI 2.4.27 from there started my problem now my buttons sometime stop working when I bloc and then unblock phone buttons start working sometime it need restart phone I didn't try this ap yet but I think it's software because when buttons stop working my touchscreen is working full only buttons are not responsive is there some fix pleas PM me
After using nottachtrix arora installer to calibrate my touch would have random deadzones and w,e,s,z didnt work. Tried recalibrating with installer to only make it randomly worse or slightly better. This did the trick thoough. Thanks very much!!
help me
i was used gingermod rom and change to aokp milestone 6 suddenly yesterday seen that there are area in screen didnt work i have tryied to back to gingermod still not work try this software but also didnt work what i have to do please help me
hi help me
hi help me
i have one tablet eken w70 wiht the touch invsted help me
this touchRecelibrete not succes
help me
[email protected]
Can you please give us the correct way for Re calibration
Sent from my MB860 using xda app-developers app
i'll try it, my screen not responding now
Hello, big problem with screen sensitivity. Really annoying, when typing, only a light touch
brings up multiple or wrong letters. Is there any way to adjust the sensitivity?
It is spoiling my experience of an otherwise great phone.
Any advice appreciated. RH.
I had the same issue. Found a potential fix just now. I'm still experimenting... But it does appear to be effective...
Go into settings......Language and Input...scroll to pointer speed...decrease the slider to make the touch screen less sensitive
screen sensivity
mitchw1971 said:
I had the same issue. Found a potential fix just now. I'm still experimenting... But it does appear to be effective...
Go into settings......Language and Input...scroll to pointer speed...decrease the slider to make the touch screen less sensitive
Click to expand...
Click to collapse
Hi there, many thanks for your suggestion. I have come across this solution before, unfortunately it does not
seem to make any difference to my touch screen. I have tried Swiftkey in the hope that may make a difference - no luck i'm afraid.
Please let me know if you have any success with your experimenting.
Regards RH.