Hi All,
I have an issue that's bugging me. I have upgraded to DCD 3.2.6 Rom and now I cannot get my time zone to be correct. I am in Eastern time zone but it keeps showing Atlantic time zone. Also my text messages are 4 hours off. It keeps showing 4 hours ahead of the time I am in. I have tried changing the time zone to no effect.
Anybody with any suggestions on how to rectify this issue? Any help will be greatly appreciated.
Is your phone set to automatically update time from the network?
Settings » Personal » Phone » Services » Time Synchronization
Yes the phone is set to automatically update time from the network.
I have also tried DCD's latest ROM 4.1.2 as well as the Titan Reloaded 1.3.4 ROM, however I still have the same issue.
I believe the problem may be with the radio. I have Radio 3.42.50 loaded and tried to downgrade to a lower radio, but I get an error that it's not allowed or something similar. I am at work right now, I cannot check it.
Is there a procedure for downgrading the radio? I have checked the Wiki, but I am not clear on the process.
Downgrading the radio should work, at least by using the MicroSD card method (check the 6800 Wiki for more information). If not, make sure you have the latest PRL from your carrier, etc. Radio 3.42.50 is good though, shouldn't have problems with it. I have never came across such a problem, so don't know how else I could be of assistance.
Thanks I will try downgrading the radio and returning to a Bell stock rom to see if it will help.
Related
I'm a newb and this is the first time I've flashed my VX6800, and I have verizon service.
I flashed the following seemingly successfully:
dcd ROM: 3.2.0: 6-24-08 WM 6.1 CE OS 5.2.19958 Build 19958.1.2.0
dcd RADIO: 3.42.02
I can make/receive calls and use the internet, but after every reset (both soft and hard) my phone searches for about 20 minutes before it acquires the network.
Can anyone give me any tips as to what I may try to solve this issue.
Greg
Did you run the Verizon carrier cab?
If so, and you are 100% sure you did, see try using the MicroSD method and flash to either Radio 3.39 or 3.42.20 and see if you notice a difference.
If not, well run that damned thing!
I'm pretty sure I ran that VZN Carrier cab. Is there a way that I can tell for sure?
I've also learned that if I reset the phone outside it acquires a network within a minute or less. It's just when I'm in the house it takes a long time. I never noticed it takeing a long time with the default Radio. I would have expected the performance of the 3.42.02 radio to be better than the default radio.
I've also run *228 option 1 and 2 successfully.
Maybe I should try flashing 3.42.30, like you've suggested.
there is a thread on this in this forum from a while back.
you need to go into EPST and change M.IP settings to "Mobile IP Only" and reset. then go into EPST again and change back to "Mobile IP Preferred". (or vice versa - i cant rmemeber- search for that old thread.)
Follow this thread... Worked wonders for me! No problems since.
http://forum.xda-developers.com/showthread.php?t=390609
I've got a problem! I've been working with this phone all day, and I've learned a lot! I have the verizon xv6800 and have flashed my phone 3 complete times now. Each time, the phone takes forever to get a signal. I've used the dcd 3.2 rom, with two different radios, about to try a 3rd. The two I've tried, 3.42.02, 3.42.30 both do the same thing, it will intermittently detect a signal... and finally after a while maintain the signal. The default setup doesn't have this problem, each time i flash it back it instantly picks up a signal. I'm trying the 3.37.20 radio here in a few minutes. Have I been wasting my time? Is it normal to not have phone functionality for a little while and have it intermittently at best? I've taken note of the compatible roms/radio thread so I've stayed with what's been suggested, still just no luck. Suggestions??? Help???
try this: http://forum.xda-developers.com/showpost.php?p=1944961&postcount=1
this thread has some more discussion: http://forum.xda-developers.com/showthread.php?t=371044&page=5
I've had this problem almost everytime i flash a new rom. i try that little trick of changing back and forth the m.ip settings a couple of times and eventually the problem seems to resolve after a day or so...
Thanks!!! That did the trick. I read in a post before that you had to adjust the mobile IP crap... but not the registration retry. I rebooted after following those instructions (kinda, I had to go the epst.exe file in the windows directory and edit it that way) and had signal instantly! Thanks again!
is it weird that my MIP Mode was Mobile IP Preferred by default?
Please post all discussion/issues/comments regarding Bell Mobility GPS/aGPS in this thread.
aGPS locking up
I'm running Bell, dcd 3.2.5, radio 3.42.50 with aGPS working just fine, for a while. After a couple of times of turning the screen off (Power button), or standby, or whatever you call that mode...TomTom 7.450 (and GPStoday and Intelligolf all latest versions) stop locking via aGPS. Normally I get locks in 5-10 seconds with all these programs but afterwards I get nothing. TomTom shows satellites but won't lock on to any of them.
Please ask me questions if I missed anything. Any ideas?
I used to have the same issue. I upgraded to dcd 3.2.6. Still with radio 3.42.50. I also did the aGPS setting enable per another thread. Since then, I no longer have that problem. I get quick satellite fixes for days on end without the need to soft reset.
Power mangement
Hi all,
easy fix, I had the same issue. It is the power management. Once you put your phone to stand by the GPS will not come back up unless you use Quick GPS (don't know why but it bring is out of standby) or you can do the following regedit.
In the regestry I found these settings for power management.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\Interfaces]
"{EB91C7C9-8BF6-4a2d-9AB8-69724EED97D1}"="Power-manageable display"
"{98C5250D-C29A-4985-AE5F-AFE5367E5006}"="Power-manageable NDIS miniports"
"{8DD679CE-8AB4-43c8-A14A-EA4963FAA715}"="Power-manageable block devices"
"{A32942B7-920C-486b-B0E6-92A702A99B35}"="Generic power-manageable devices"
Each one of the {} strings are an IClass for other device including the GPS. The one found in the GPS was this "{A32942B7-920C-486b-B0E6-92A702A99B35}. When I deleted the IClass string out of the following keys, you are now able to put your phone to standby and the GPS will keep running.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GPSID]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SerialGPS]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
Thanks for the info guys! I'll try deleting the registry items first and see what happens.
AGPS and Data usage
Hi, I am hoping someone can answer this for me, does AGPS use data, is it costing me money to use it? I have read many posts and still I am confused. I am using dcd rom 3.2.6, radio 3.42.50 PRI 2.02_007. Thanks
I noticed a significant decrease in lock times after going to PRI 2.02_007, FWIW.
incenseguru said:
Hi, I am hoping someone can answer this for me, does AGPS use data, is it costing me money to use it?
Click to expand...
Click to collapse
Yes, by default the assisted mode will request to transfer small amounts of data (download satellite ephemeris data) over the network everytime the GPS is initiated and when satellite coverage is obscurred (location determination from a IP defined assistance server).
I have confirmed this with my online data summary with Telus.
Thanks for the for the help.
CarmeloR said:
When I deleted the IClass string out of the following keys, you are now able to put your phone to standby and the GPS will keep running.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GPSID]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SerialGPS]
"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"
Click to expand...
Click to collapse
Thank you! This works perfectly.
ande8150 said:
I noticed a significant decrease in lock times after going to PRI 2.02_007, FWIW.
Click to expand...
Click to collapse
What kind of lock times are you seeing? I'm seeing 10-15 seconds. I'm fine with that.
88fingerslukee said:
What kind of lock times are you seeing? I'm seeing 10-15 seconds. I'm fine with that.
Click to expand...
Click to collapse
About 10 seconds. It was way longer before. Sometimes a few mintues.
I'm running DCD 3.2.6 with radio 3.42.50 and PRI 1.34_007. I have ridiculous lock times most of the time. I don't use QuickGPS or anything else other than Google Maps. I've waited minutes sometimes to get a lock. I live in Milton, ON, and use GPS typcially anywhere in that area and the GTA (Toronto) area. I don't use GPS all that often and perhaps that's why is slow to lock each time I try and use it?
Regarding the PRI comment made earlier in this thread. I'm curious how you upgrade your PRI? I've tried the "Update PRI" icon in Settings | Connections, and although it reboots after doing something it's always the same rev afterwards. It also returns an error after it tries to update and prior to the reboot -"backup EFS failed" in a window with a window title of "PPST". Tap okay to that window and the phone soft reboots and nothing has changed.
I also could not update PRI using the icon provided by DCD. He provided the attached cab version in another post. You will have to install it on your device, then run /windows/ppst.exe
Also, be sure to do the GPS fix found at this link:
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
These 2 things should fix your lock times.
ande8150 said:
I also could not update PRI using the icon provided by DCD. He provided the attached cab version in another post. You will have to install it on your device, then run /windows/ppst.exe
Also, be sure to do the GPS fix found at this link:
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
These 2 things should fix your lock times.
Click to expand...
Click to collapse
I concur, these are the same steps I followed to get aGPS working.
ande8150 said:
I also could not update PRI using the icon provided by DCD. He provided the attached cab version in another post. You will have to install it on your device, then run /windows/ppst.exe
Also, be sure to do the GPS fix found at this link:
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
These 2 things should fix your lock times.
Click to expand...
Click to collapse
S-W-E-E-E-E-T! Performed both steps, and got my first lock in about 20 seconds. I'll test it over the next few days in different areas to see if this is now the norm. Many thanks for the info.
No problem. Enjoy!
I am running DCD 4.1.2 and Radio 3.42.40... Of course I am will Bell...lol
My GPS Radio got signal ONCE and never has sice. Do I need to perform the two mentioned steps above?
The Carrier CAB install.
The QPST Modifcations/Fix.
Let me know!
mcfz said:
I am running DCD 4.1.2 and Radio 3.42.40... Of course I am will Bell...lol
My GPS Radio got signal ONCE and never has sice. Do I need to perform the two mentioned steps above?
The Carrier CAB install.
The QPST Modifcations/Fix.
Let me know!
Click to expand...
Click to collapse
Definitely install the carrier cab file (are you getting data right now?) and perform the GPS fix. Beware of the PRI update as I have had issues with PRI 2.02_007.
88fingerslukee said:
Definitely install the carrier cab file (are you getting data right now?) and perform the GPS fix. Beware of the PRI update as I have had issues with PRI 2.02_007.
Click to expand...
Click to collapse
Right now the phone isnt doing squat. I think I am going to downgrade my DCD a lower version then run the carrier cab and GPS fix...
I will do it up and post if I need help
R 3.42.50
D 3.3.4
Verizon Service
I've been running on this awhile. A few weeks ago, I noticed that my GPS just stopped working. Ie meaning that it was working before, and I made zero changes and now none of the GPS applications can detect that there is a GPS.
I'm looking for the most painless recommendation that I can do to get it working.
A. Do I need to flash a new radio rom and then do another set of the GPSFix using the windows tools again?
B. Do I need to upgrade both the rom and radio at the same time (ugh ...)
C. Is there another reason for the fact it no longer works, such as the IP address changed for assisted GPS or anything and I could just change it?
Anything you can offer would help. I went through a few pages of the 70+ page posts here on these subjects but couldnt find anything relating to prior working phones randomly stop working.
I will say that my friend is also on Verizon, has a mogul, I think he has a similiar radio and firmware and his has stopped working as well, so my guess is something has change carrier side and we're just not in the know =)
Thanks in advance for any points, and no flames for not being magical and finding the right post with the answer already in it ..
I just went through the latest updates to the AGPS article at:
http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
I have updated the IP address to the one listed there (mine was different), and still no luck.
Working now. Had to restart it twice, turn location on and off and on again, and then let it sit for awhile. I just didnt have the patience.
Any ideas how to get GPS going? I've tried multiple roms, messing with QPST, following wiki, different cabs / reg settings, and I can't get anything.
There does seem to be some NMEA data flying around on COM4, but it is lines like $GPR,,,,,,,,,,,,,,,,,,,,,, , no GPS data in it.
I have tried many different programs, never getting even one satellite in view.
Currently system is:
ROM: dcd 3.3.4
Radio 3.37.75
PRL version 51574
PRI version 1.35_002
I have been searching google, here, ppc forums, and HOFO for DAYS trying to get this to work.
(also I am wanting to get QNC internet working, that is a secondary goal though)
If anyone can help me I would appreciate it.
Ok you are are with Verizon. And I bet you had MR1/2 before you went custom. The stock verizon rom blocks gps out with any custom rom afterwards. If you want a custom rom and gps then do the following roll back rom then go to custom again. http://forum.ppcgeeks.com/showthread.php?t=21161 Then apply gps settings. http://forum.xda-developers.com/showpost.php?p=3555579&postcount=703
The phone is activated on Page Plus, a MVNO that utilizes Verizon network. I got it from someone who used it on verizon.
When I first got it, I updated to latest "official" ROM, which I believe was MR2. I downloaded it from HTC's website.
I have just now tried to update my PRI using RadioRefurbish.exe but it does not seem to be working...
I will look at those things you posted. I had come across something mentioning that.. wasn't sure if it was what I needed to do or not.
**** Verizon. Ugh. Evil. Pure Evil.
Edit: I tried some Valhalla Legends, GPS Fix, blah blah other CAB files when I had MR2, with same results.
Ok, I have relocked device, and now I am loading the stock firmware.
What do I do after that? I can follow those steps. but... it does not seem complete information there on that link.
Do I install some version of valhalla, then do those steps?
Won't all that be lost on a hard reboot / ROM flash to custom ROM though?
Flashing to stock get you a 1.35 pri. You then can unlock, flash radio, and the go to which ever custom rom you like. The only thing is that i dont know if agps will work for you since you arent on verizon. But you so know agps requires a data package for use. You will have standalone gps without installing anyhting on the custom rom. I use standalone with no problems.
already have that pri as per my original post.
I was trying to get to the 2.x pri before.... do I not want that?
I also tried to flash a higher radio when I was on custom rom but it would not work.
So what do I do now, and in precisely what order?
.... right! Well, that makes it easy.
I unlocked again with 2.40, now I am trying to flash the latest version radio found on DCD's file server.
I flashed latest radio... unit hard reset, then afterwards I still have Radio 1.30.60 on device information screen.
If you could tell me step by step what I need to do, I would appreciate it.
Currently :
ROM version 2.09.605.8
rom date 05 03 07
radio 1.30.60
PRI version 1.35_002
GPS is now somewhat working, I haven't gotten a lock yet. Also haven't gone outside yet, might have something to do with it.
Now to get aGPS working.
Except DCD sucks, and QPST doesn't work in half his ROMs. Sigh. I'll have to find a decent ROM to use so I can get aGPS and QNC internet working.
Thanks for your help drewcam888, it set me on the right path to getting where I am now.
DCd is awesome and qpst works on all this roms. You must have a carrier cab installed to allow use of ## codes.
I believe you are mistaken. Why can I not connect then? I have installed Verizon Carrier cab. Com4 is showing up as "NO PHONE". Before it showed my phone.
I took my sister to breakfast this morning. On the way there, no GPS lock. Sigh. Sats in view, but only using one or two.
I shut down phone, then rebooted.
After eating inside, I fired up VisualGPSCE again. After only a few brief moments, locks on 7 satellites. Then it went back and forth between 6 and 10 locks.
Awesome!
So, either ephemeris was finally downloaded, or aGPS is working. Unsure which.
I loaded google maps, turned on satellite view, and the satellite imagery overlay correctly showed me on the south end of the restaurant. Cool stuff. GM claimed 30 meters accuracy, but it had to be much better. I would estimate 1-5.
I am wondering if this gpsOne chip is sensitive enough to use for geocaching. That would be cool.
Dude it isnt always on com 4. I have had it on com 10 and many others. Click add a port and find the diagnostic port. Don't blame others for your lack of knowledge. Your computer assigns this port and it can change.
The gps should be accurate to 1-2 meters I would think. But only is clear view of sky where you can find the most satellites.
There are no diagnostic ports to add.
Lack of knowledge my ass.
Google will reveal many others with the same issue.
Now unable to authentic my phone on Verizon.. just tried to make a call. Weird since apparently data and SMS both work.
Well I have gotten qpst to work on 3.2.5, 3.2.6, 3.3.4, and 4.1.2. So yes you are having a problem. It isn't with the rom. Are you sure you are dialing ##3424 send to enter diagnostics mode
Can you elaborate on how you have done this?
I go to add a port in QPST, but there are no ports to add in the left column.
Yes I am sure I am entering diagnostics mode.
I open QPST configuration. Then select "add new port". Then find which port my phone is on. Also are you using XP? I am guess you have the modem drivers installed being that you have used qpst before.
Yes, and yes.
There are no additional ports to add listed.
hmm. Maybe a computer problem. Do you see the phone listed under com ports under device manager. If not your computer isnt seeing your phone for some reason.
Under comp mgmnt there is HTC USB modem (with a yellow ! reinstalling drivers now)
Then there is a HTC diagnostic interface on COM4.
I can confirm that aGPS is working, since when I turn on GPS with GPS toggle, I instantly get a network logon request.
My akey has been deleted, that's why it doesn't automatically connect with EVDO.
See dont blame others. Ask questions and get answers before you accuse.