Related
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to threads like TalynOne's The Titan Internal GPS FAQ (01/30/2008) located here...http://forum.xda-developers.com/showthread.php?t=363431
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
xweaponx said:
I have seen many, many threads about POST installation issues regarding the new 3.16 rom. I would like to attempt a problem/resolution thread that hopefully everyone will participate in order to create a "one-stop-shopping" thread regarding these issues.
I figure the mods will later either delete dormant threads or compile related threads into one. Hopefully we can get most if not all issues related to post installation here and properly labeled...
Please post problem(s) and if applicable, the resolution(s) to the problem regarding the 3.16 rom w/ Rev. A & GPS compatibility, including custom & stock rom. Please keep the thread limited to calls, data ( Rev. A & 0 plus Ev & 1X), task bar icons, prl's, etc and refer GPS questions/issues to other GPS threads...
I have included below some links to start off the thread which includes a link to the definition of what the PRL is and what it does and below that is a site with former & current PRL's for numerous carriers.
PRL - http://en.wikipedia.org/wiki/Preferred_roaming_list
PRL Listing - http://corolada.com/prl/
Click to expand...
Click to collapse
I flashed this ROM and I have since, jumped to DCDs version of it, and then back to 2.17.
I have, and apparently, a lot of folks have had inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
The odd thing is that I have loaded new ROMS (including the current Sprint OEM ROM) and I'm still having that problem. (I'm taking suggestions to resolve this)
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
On a kinda more positive note...
GPS worked well (when the EVDO connection did)
New Apps sucked up more of our previous RAM, but I didn't have any
latency or freeze ups.
I myself am experiencing a number of problems with the new ROM version, and will be downgrading to 2.17 soon. It took 3 installations of the new ROM to get the GPS to work. Since then, I've experienced several performance issues, including multiple times where the phone will freeze during web browsing in Opera Mobile. Sometimes, the phone won't even freeze, but will come up with a screen saying that the system memory is low, even when I'm only running Opera Mobile, it'll ask me to close either "Opera Mobile" "Phone" "Phone" or "Phone". Weird? I think so...
Also, there are times where I won't even get the internet to work. I'll have to either go in to the connections menu and disable the data connection, or do a soft reset of the phone completely.
In my opinion, it's probably more trouble than I really need to go through. I will be downgrading to 2.17 until the official release comes out.
Same issues for me:
inconsistent EVDO connection problems. Some times it freezes on "Loading"...other times, I can begin to pull up a web page and it times out. Speeds were good when it rarely did work properly.
Also, like others, voice signal displayed fewer bars than usual. More "Signal Faded, Call lost than I have ever seen with this device.
Spent 30 min with VZW level 2 support today. I called due to ##debug HDR an/aaa was = 0.. I was under the impression was supposed to be set to 1. They did look at my SSDR (I think he said that) and found it had a small issue with the authentication (still reads =0), but after he fixed that I still have issues. My HDR RDX power goes from -71db to -96db.
I also noticed every time I call the phone changes from EV to 1x. I know you don't use EV to make voice calls, but I did not remember (key word) seeing it switch like that before. Maybe someone with 2.17 1.40 radio can confirm.
I have thought about moving back too, but my call ticket history is getting pretty long with VZW and if I needed another A-key (yes I have one written down) it may start to look strange.
I'm on sprint and when I tried to update I was stuck on boot loader so I went online and switched esn over to my Treo for the time being as I worked on my Mogul. Eventually I got to load the rom fully and switched esn back. I noticed afterwards that my internet was only locking at 1x. Upon restart it would say EV but anytime it is connected to the net it is 1x. DSLreports clocked it at 50-90kbps so I know as definitely getting 1x speed. Reloaded the rom several times and still the same. This went on for 2 days. Eventually called Sprint and told them of my problem. They noticed that I was still on the regular Vision plan but I have always been able to connect to EVDO speeds so I never thought that was an issue. They updated me to Power Vision and right after I started getting EVDO speeds. I'm not sure if it was because of the change or maybe a restart of my data service that did the trick.
2 other issues I'm having is I noticed my phone is a little slow with this ROM. Opening programs etc. Sometimes the program using GPS like Live Search or GPS Viewer will lock up temporarily. The 2nd issue is what some are also reporting regarding signal. I noticed I get 1 to 2 less signal bars.
Overall 3.16 has been "ok". No problems with flashing really, and memory usage is "ok", I'm averaging around 17-18mb free with no apps running. It's not exactly the 20-22mb I had free with my prior custom rom, but enough to get by.
I'm not having problems with phone freezes or out of memory errors. I am, however, having some problems with BT and with net connectivity.
Data: I'm using Schap's Advanced config tool, version 1.1, and I've selected the option to keep my 'net connection live all the time. Unfortunately, this is not working, and I'm finding that throughout the day my connection goes down. With my prior custom rom, if I was streaming audio content over evdo or 1x, the connection would stay alive as long as the audio program was running, barring a loss of cell signal. Now I'm finding that about once an hour my data connection goes down and interrupts my audio stream.
BT: I have a Plantronics 320 headset, which worked flawlessly (albeit with less than stellar audio quality) with my prior rom. With 3.16, the volume and sound quality are much improved, BUT I am not able to answer calls on my headset. If I initiate a call with BT on, no problems, I can talk till the call is over, then press the headset hard button to hang up. If I *receive* a call, however, when I press the headset hard button to answer, the call is answered, but the audio is not directed to the headset. Instead, it routes to the handset.
GPS works well with TeleNav, GoogleMaps, Live, and generally locks onto 5-7 satellites within about 60 seconds if I'm somewhere with a clear view of the sky.
I tried using GPS2Blue to redirect the GPS data to a BT comm port. When I have BT enabled and attempt to redirect, GPS2Blue says BT port not open, waiting for BT port to open. If I go into comm manager and turn BT off, then GPS2Blue says BT port is open, and begins to wait for a BT connection to my laptop. If I go back into comm manager, the BT icon has been grayed out as if BT is off, but the little circled "X" icon is not superimposed over the BT icon as it would be when BT is off. If I click the icon again, it acts as if BT is being enabled, but the icon doesn't change, and the BT LED does not begin to blink. Don't know if it's a problem with GPS2Blue software or something else. Wish it would work cleanly, I'd love to use my 6800 as a BT GPS receiver for my laptop.
ETA: I've seen a few folks mention that when they answer a voice call their 6800 switches from Evdo to 1X. I'm wondering if this might be a way of implementing simultaneous voice & data. Has anyone tried taking a call and browsing the web simultaneously? I think this may be dependant upon network services in your area, so this may only work for folks in big cities with the most advanced network features, if it works at all...
ETA2: Just tried the above, and I'm getting the usual message that data connections cannot be initiated while on a voice call. I'm in a large city that *should* have all the latest network features, so if it dual voice/data was possible with this radio then it should work here. I'm assuming it's not presently possible, based on my experiment, but I'd be happy to be proven wrong.
with the sprint rom a ton of us have no audio out using an adaptor to listen through headphones
http://forum.xda-developers.com/showthread.php?t=363087
is a big thread about this going on the main board.
Took the plunge and installed the "stock" 3.16 on both my phone and a friend's last night. The first thing I want to note is that it went extremely smooth. No issues to note. It took a bit too long for my liking but it was fine. I didn't have to modify any MSID or MSN data - my phone worked fine right off the bat. Data was hosed, but a quick client-initiated IOTA Programming fixed that. (Settings, Personal, Phone, Services, Internet, Get Settings)
I have two constantly pinging(one 15 mins, one 30) e-mail accounts(one imap, one Exchange) that must keep my data connection alive. I haven't noticed a single decline in my data rate, nor a problem with disconnections. Then again, I live in NYC, which may make a difference.
GPS sucked last night - I couldn't get a satellite to save my life. On the way to work today, though, it was perfect. 4 satellites found in GMaps and tracking worked great.
I'm pretty happy w/the new additions to PocketOutlook too. Has anyone noticed that Gmail's IMAP works perfectly now, and that when you have multiple accounts - hitting messaging (when it's previously closed) brings up a choice of which account to go to? SWEET!
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
So the phone made me out to be a liar. The LiveSearch download from wls.live.com failed now. It definitely worked last night on my roommate's phone however. Hrm. I downloaded it from my pc and emailed it to myself and it actually downloaded. That's odd.
Foetus said:
Just a quick "me too" regarding both disconnects and getting hung up during certain downloads. I've noticed that both "Live Search" from Microsoft's site and the latest (2.17) OEM ROM from HTC's site both hang up soon after they start downloading. This occurs both on the phone itself and while tethering to my laptop.
Click to expand...
Click to collapse
I didn't try with the ROM update, but I did experience this with Live Search.
New Rom
Vinny75 said:
I didn't try with the ROM update, but I did experience this with Live Search.
Click to expand...
Click to collapse
Had trouble getting my phone to flash, because I flashed the radio before the rom. Once I got phone going is working perfect. Hooked up to pda net on laptop downloading at 1.7 uploading at 500K. Use Holux to get gps started all programs work, Tom Tom is more accurate with my mogul compared to the external gps. Have not tried my s9 headphones yet. Running the DCD beta and I have no complaints except for the memory. Phone quality is the same.
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
I was running Custels V1.1 2.14 and radio 1.47.00. I had my data set to connect all the time (which never idled btw...)and had Ev service everywhere. After installing Dcd's 3.16 & radio 3.27 I first recieved the "twin towers"... One had data connection and the other looked like the searching-for-signal tower. Plus my roam indicator was constanlty blinking.
After searching the forums, a helpful soul recommended *228 then press 3 which programs your phone. Remember that you are not upgrading to a new phone.
I then *228 and pressed 2 this time to program the latest PRL (which was 30029 before and still then). After searching some more, I saw that there was indeed a newer PRL which is 40029 (link in the first thread). I downloaded the PRL to my Sd card, dialed **775, entered my Alltel Unlock Code of 000000 and and the first screen I saw was update prl. Click on "Menu" in bottom right and hit the "Edit" button. Now you should see a empty value with "Browse" below it. Browse to the location where you placed your prl, upload and if you exit out correctly, you should be soft resetting your device.
After completeing the steps above, my roaming triangle was gone as well as the extra tower. I still have my data constantly on with Ev coverage all the time but my data actually idles now. Call quality has been noticed by myself and others as clearer and louder than before.
That Reg Entry doesnt exist on mine.
TalynOne said:
v3.16+ ROM puts a voicemail icon on the 1 key which screws up the keypad if you are using the BlueFrog Big Button Dialer. To fix this, change the registry DWORD value at
Code:
HKCU\ControlPanel\PhoneExtendFunction\CDMA\EnableVoicemailIcon
from 1 to 0, and soft reset.
Click to expand...
Click to collapse
Mine has the following instead:
"HKCU\ControlPanel\PhoneExtendFunction\CDMA\VoicemailIcon
Value name:BtnDN_LAND Value data:Windows\_VoicemailBtn1_Land.bmp" and three other similars.
Should that entry be added in it's entirety or should I remove my current entries? Any body else find they have entries like mine?
I thought I had that problem at first, but when I looked more closely, the reg entry is *in* the CDMA folder, not in a sub-folder below CDMA.
!!Major Bluetooth Issue!!
recently installed DCD's new GPS enabled ROM for Verizon. Everything has been working well even the GPS !!EXCEPT!! Bluetooth OBEX. When I try to send / beam any type of file my XV6800 stops responding and I am forced to soft reset.
I don't know if this only affects the Verizon ROM or all carriers for that matter. Is there any one here that has a fix or know's of a fix to resolve this issue? Has DCD released any news on this? I would Gladly appreciate it, as all the people with this issue.
Searching For Service
I loaded the Sprint Test Rom. No when ever I boot my phone it takes ~4 minutes for the phone to lock onto the network.
You are may differ with this situation....
PRL's didn't change. Even reloaded 60610. EVDO roaming is gone. Guess they didn't like people forcing their phone to roaming in areas where Alltel has EVDO and Sprint doesn't. 60611 also removed EVDO roaming in my area. 60610 and 2.17 work fine with EVDO roaming.
CardExport & the My Documents-redirect-to-SD-card reg tweak:
HKLM\System\StorageManager\Profiles\SDMemory
change the value of the string "Folder" to "My documents"
no longer work.
So, I searched, but couldn't find anything. If I missed it, please direct me w/ a link.
I recently upgraded my XV6800 to DCD's 2.3.2 ROM and Radio 3.27.00, and now my radio takes 17+ minutes to acquire a cellular signal. This can't be normal. So, once I did get a signal, I dialed *228 option 2, but that didn't fix it. I also re-entered my MSID and MDN from ##778. Nothing seems to be fixing my issue. Any suggestions?
-Randy
Why would you use 2.3.2 and radio 3.27 when you could upgrade to 3.0.4 and radio 3.37.20? Radio 3.27 is a beta radio that was leaked and is very unreliable and buggy. I could see not upgrading to 3.0.4 and 3.37.20 maybe if you didn't care about GPS or RevA, in which case you could use 1.7.0...but 2.3.2 is a GPS rom, so why wouldn't you use the official WM 6.1 3.0.4 rom with the official latest radio?
Yeah dude, get with the program. If you are going to update your rom (i.e. hack your phone) anyway, why not go with the latest.
Go here and follow the instructions closely. You wont look back.
Okay, loaded the Sprint ROM to get the radio, then loaded the VZW version of DCD's 3.0.4.
Looked in Device Info and it shows ROM version: dcd 3.0.4 and Radio version: 3.35.04
Still having the exact same problem. It's taking 15+ minuted to acquire a cellular signal.
And yes, I have plenty of reception here. I have tried it in numerous areas actually, where I know I get full reception.
There's a whole thread devoted to this right here somwhere...
You need to do the following:
phone app, dial *22803 or *22802 (whichever one gets you a signal) and hit phone hang-up when you get a signal and it says it's starting to program. Now that you have a signal do the next step.
phone app, dial ##778
select "EDIT" and enter the 000000 unlock code
select "VIEW INFO" and select "M.IP Settings"
Edit MIP_MODE and change to something else, then go back and change it again back to "Mobile IP Preferred".
Do the smae for MIP reg retried, retry timeout and pre-registration timeout.
Change all the values, ok, then change them again back to the original setting.
Settings are: Mob IP Pref, 2 retries, 1750ms retry timeout, 0 pre-reg timeout.
When you're all done save and exit - soft-resets your phone.
You should be good after this.
Good luck!
rp3319 said:
There's a whole thread devoted to this right here somwhere...
You need to do the following:
phone app, dial *22803 or *22802 (whichever one gets you a signal) and hit phone hang-up when you get a signal and it says it's starting to program. Now that you have a signal do the next step.
phone app, dial ##778
select "EDIT" and enter the 000000 unlock code
select "VIEW INFO" and select "M.IP Settings"
Edit MIP_MODE and change to something else, then go back and change it again back to "Mobile IP Preferred".
Do the smae for MIP reg retried, retry timeout and pre-registration timeout.
Change all the values, ok, then change them again back to the original setting.
Settings are: Mob IP Pref, 2 retries, 1750ms retry timeout, 0 pre-reg timeout.
When you're all done save and exit - soft-resets your phone.
You should be good after this.
Good luck!
Click to expand...
Click to collapse
AWESOME~! Thanks for the help man, nobody else seemed to know.
Any way to thank you on here like you can on ppcgeeks?
wait... didnt work lol
looked like it was working, rebooted, LED started blinking, signal bar was up and EVDO icon was showing, went to sent a text message, and it failed, said there was no signal. rebooted, then back to what it was doing before, signal bar has a "..." under it and it just keeps searching till it acuires a signal 15 minutes later.
holy crap.... it's working now. i have no idea what the hell is goin on. i did a soft reset like 3 times and it's still working, so i'm not worried about it.
thanks again for the help
shapiror06 said:
holy crap.... it's working now. i have no idea what the hell is goin on. i did a soft reset like 3 times and it's still working, so i'm not worried about it.
thanks again for the help
Click to expand...
Click to collapse
Yeah, I've done it about 4-5 times now and the instructions are from memory, so the exact sequence may or may not be exactly correct, but since you've got it working you should be fine.
You may or may not run into this again if you do another ROM update in the future. The Sprint ROM update did NOT mess me up, but some of the following updates for DCD's rom have had this happen. Not all the time though. You should be able to hard reset (I think) w/out this happening and definitely you're good for soft resets.
It's like something in the settings is getting changed, but not such that when you open the EPST settings that they are different... when you go and modify the values and resave them, they get written back to where they need to be.
If you look unter Titan on PPCGeeks I think you'll find a couple threads on this issue. It seems to be a VZW thing I think.
Also - there is a thread somewhere about where you can download the latest PRL to update your phone. I never did that, but probably should.
rp3319 said:
Also - there is a thread somewhere about where you can download the latest PRL to update your phone. I never did that, but probably should.
Click to expand...
Click to collapse
hmmm if you find that thread, let me know! because i think after going through your process to to fix my signal acquisition problem, if I do a *228 opt 2 to update the PRL, it will mess up my signal acuisition again. So if I can manually download the latest PRL, that would be sweet.
OMG this worked for me too! I've been looking for a fix for this for two months. I found a workaround by d/l an old outdated prl from corolada.com but it was a non-nationwide PRL. Did the above fix and I've got a signal again with the latest PRL! Thanks guys!
shapiror06 said:
hmmm if you find that thread, let me know! because i think after going through your process to to fix my signal acquisition problem, if I do a *228 opt 2 to update the PRL, it will mess up my signal acuisition again. So if I can manually download the latest PRL, that would be sweet.
Click to expand...
Click to collapse
Oh, forgot to mention, the PRL's can be downloaded and placed on your storage card from corolada/prl...
i have the same problem, and i have done EXACTLY what this thread sys, yet i still do not get a signal on restart. i have to wait 15 minutes. i have the latest prl also, 51020
whats the deal?
im runnin 3.1.2 and radio 3.39.10
ok...i got calls back,but no data... (so o text or web), do i need to call verizon to get a new akey now? is that it?
-connor
crobs808 said:
ok...i got calls back,but no data... (so o text or web), do i need to call verizon to get a new akey now? is that it?
-connor
Click to expand...
Click to collapse
ok, anyone??? i tried *228 option 1, to get my data back, but it didnt work and when it restarted i had no signal again, so i redid the abov step, sgot my signal back so i can make and receive calls, but still no data, back where i was a minute ago, so how do i get the data back without losing my signal again?? i know if i call the verizon rep he will want me to try *228 and option 1, which will lose my signal, but of course he will say no it wont, so what do i need? just the A Key? or what? how do i call up and just get that without them trying to do all the other steps...cause i have one of the older xv8600 that clears some settings like the akey when you do a hard reset (i know some do that and some dont), so what do i need to fix my data without re-losing my signal?
-thanks
SOLUTION!
ok this worked for me just takes the right combination and order of events.
so if you have no data or calls or a combination of one or the other - go ahead and call verizon, tell them you got cut off right before they rep was going to give you the Authentication key, they will give it to you, restart, this will still show no signal and no data...dont worry. now follow the ##778 steps above, and when you restart you will have both calls and data
-connor
Just in case anyone checks this (I had to after I flash to a stock ROM and back to a DCD ROM and do the MIP settings again), here is the link to manually download PRLs
http://www.corolada.com/prl/
Now, I was going to download an updated PRL manually, but I just did *228 (on Verizon) and it actually gave me a more updated version than is currently on that website, so you might try that before manually updating the PRL
-crobs808
I've got a problem! I've been working with this phone all day, and I've learned a lot! I have the verizon xv6800 and have flashed my phone 3 complete times now. Each time, the phone takes forever to get a signal. I've used the dcd 3.2 rom, with two different radios, about to try a 3rd. The two I've tried, 3.42.02, 3.42.30 both do the same thing, it will intermittently detect a signal... and finally after a while maintain the signal. The default setup doesn't have this problem, each time i flash it back it instantly picks up a signal. I'm trying the 3.37.20 radio here in a few minutes. Have I been wasting my time? Is it normal to not have phone functionality for a little while and have it intermittently at best? I've taken note of the compatible roms/radio thread so I've stayed with what's been suggested, still just no luck. Suggestions??? Help???
try this: http://forum.xda-developers.com/showpost.php?p=1944961&postcount=1
this thread has some more discussion: http://forum.xda-developers.com/showthread.php?t=371044&page=5
I've had this problem almost everytime i flash a new rom. i try that little trick of changing back and forth the m.ip settings a couple of times and eventually the problem seems to resolve after a day or so...
Thanks!!! That did the trick. I read in a post before that you had to adjust the mobile IP crap... but not the registration retry. I rebooted after following those instructions (kinda, I had to go the epst.exe file in the windows directory and edit it that way) and had signal instantly! Thanks again!
is it weird that my MIP Mode was Mobile IP Preferred by default?
copied and pasted from the gps faq:
hey guys,
im a long time reader and this is me first post here on the forums.
im having an issue with the gps for the xv6800 on verizon. ive read through lots and lots of posts regarding verizon and their gps service, agps and the like. my problem is that i dont ever get a lock, and never see any satalites in the htc gps tool. it just sits there.
ive got
VZW XV6800
Rom: DCD 3.2.0
Radio: 3.42.30
i installed the radio using the sprint official rom, and then put dcd's over that. im using olipro 2.40 and after i put in dcd's rom, i ran the verizon carrier cab. also the arc mms thing but im sure that has nothing to do with anything other than mms.
my gps settings are
com4
4800 baud
and manage automatically.
location mode is set to on.
i dont have tomtom or another commercial program to test, so ive been trying google maps and windows live. google maps tells me my handset doesnt seem to be compatible with my location, and windows live just tells me gps signal lost.
ive let it sit for roughly an hour and some change, trying for a lock, although that is unpractical for everyday use, i just wanted it to lock.
i read on here that other verizon customers gets theirs to lock in minutes, and that would be great for me if i could get that. so im asking, is it just my handset? or have i not done a crucial step in the flashing, programming?
didnt call verizon when i switched phones to reactivate data or whatever, i didnt know what i was supposed to ask them to do, so i just switched phones thru vzw.com and it makes calls and uses the ## codes perfectly. ive dont the *228 ect .
am i just sol? i really would love to have gps back, my previous phone broke, and i used vznav and that was great.
thanks in advance.
try this, and see if it makes a difference:
http://wiki.xda-developers.com/index.php?pagename=TitanGpsFix
thank you for the reply but i forgot to mention that i have already applied the gps fix fromt the tutorial. i read somwhere that is persists through flashes, so i have not tried to reapply it after upgrading to the latest dcd.
if it truly does not then i will try to reapply that again when i get off of work
gmaps always says not compatible with my location (it is a feature some phones support that doesn't use gps) - don't use my location, check 'use gps'.... once the gps has a lock my location will send you to that location though....
Hi All,
I have an issue that's bugging me. I have upgraded to DCD 3.2.6 Rom and now I cannot get my time zone to be correct. I am in Eastern time zone but it keeps showing Atlantic time zone. Also my text messages are 4 hours off. It keeps showing 4 hours ahead of the time I am in. I have tried changing the time zone to no effect.
Anybody with any suggestions on how to rectify this issue? Any help will be greatly appreciated.
Is your phone set to automatically update time from the network?
Settings » Personal » Phone » Services » Time Synchronization
Yes the phone is set to automatically update time from the network.
I have also tried DCD's latest ROM 4.1.2 as well as the Titan Reloaded 1.3.4 ROM, however I still have the same issue.
I believe the problem may be with the radio. I have Radio 3.42.50 loaded and tried to downgrade to a lower radio, but I get an error that it's not allowed or something similar. I am at work right now, I cannot check it.
Is there a procedure for downgrading the radio? I have checked the Wiki, but I am not clear on the process.
Downgrading the radio should work, at least by using the MicroSD card method (check the 6800 Wiki for more information). If not, make sure you have the latest PRL from your carrier, etc. Radio 3.42.50 is good though, shouldn't have problems with it. I have never came across such a problem, so don't know how else I could be of assistance.
Thanks I will try downgrading the radio and returning to a Bell stock rom to see if it will help.