Hello everybody,
i´ve made an upgrade in my S200 to wm6, everything worked except my contacts in my SIM card. I try to enter in the menu but he doesnt let me, i also tried to install icontac and the numbers and names dont show up, and when i try to put a new contact it is shown a error message.
When im recieving a call from a number that is stored in the SIM card it recognizes the name and number...
Can anybody help me with this bug or error?
Thanks.
go edit registry:
HKCU\ControlPanel\Phone\ShowSim
change the ShowSim Value to 1
fixed~~~
We should do hard reset before restore the contact. Do hard reset or 'clear storage' soon after flashing a new rom. Good luck.
I think the problem it´s on the ROM, i have the version 4.0.0.4 PDAVIET, and i need the 4.0.0.6 TOUCH, but the link that has rapidshare here on the forum doesnt have the file, can anybody send me a new link to share this ROM?
changhorng said:
go edit registry:
HKCU\ControlPanel\Phone\ShowSim
change the ShowSim Value to 1
fixed~~~
Click to expand...
Click to collapse
Could you explain where is HKCU\ControlPanel\Phone\ShowSim?
go install registry editor~ copy to ur phone and install it~ then run that programe. den go edit the showsim at the location
HKCU\ControlPanel\Phone\ShowSim
change the showsim value to 1
HKCU = HKey_Current User
Related
Can anyone post or PM the last release of Caller ID ??
My 1.0 ITA is not consistent, so I would like to try out a more recent release... ITA or WWE are both welcome.
thanks
version 1.20 may be the last version.
here you go
Thanks, but...
thanks guys, I tried both.
But:
ITA is the same I have (the about window says 1.00)
WWE looks to have dbase compatibility problems with contacts: gives a contact dbase read error
Thanks anyway.
cool, didn't know 1.20 works on Himalaya, but it does as long as you overwrite all the files
Now I can remove Ringtonex
i tried thw WWE version ! but it hard-resets my XDAII 1.66WWE !!!
thanx to the backup!
is there an offical version of Caller ID?
thanx
Files and structures changed in 1.20. So if you just run the cab on your device . there will be some files left over from previous versions which didn't got overwrite. They may (or may not) cause problems.
BTW if you don't wanna hard-reset to clear all those files. You have to remove it manually before you install 1.20 cab.
Windows\Caller_ID_(ht).htm
Windows\Setup4CID.dll
Windows\IACIDSync.dll
Windows\IA_P_PhotoV.dll
Windows\IA_P_PhotoC.dll
Windows\IA_P_DspCID.dll
Windows\IA_P_Contacts.exe
Windows\IA_P_Contacts.dll
Windows\IA_P_AssignP.dll
Windows\IA_Caller_ID.exe
This may be not necessary.
My Documents\IA Caller ID Photos\*.*
My Documents\Templates\*.pit
WINDOWS\START MENU\PROGRAMS\Photo Contacts.lnk
WINDOWS\Help\Photo Contacts.lnk
WINDOWS\STARTUP\IA_Caller_ID.lnk
some things in the registry are also no longer needed, by comparing the two cabs i found these things todo:
Code:
remove [HKEY_CURRENT_USER\Software\IA Style\IA Caller ID\1.14]
remove [HKEY_CURRENT_USER\Software\IA Style\IA_P_Contacts]
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDMain]
changed "DLL"="\Windows\IA_P_PhotoC.DLL" into "DLL"="PhotoC.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDPhotoView]
changed "DLL"="\Windows\IA_P_PhotoV.DLL" into "DLL"="PhotoV.DLL"
in [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PimApps\PimExtensions\Contacts\AddIns\IACallerIDAssignPhoto]
changed "DLL"="\Windows\IA_P_AssignP.DLL" into "DLL"="AssignP.DLL"
remove [HKEY_LOCAL_MACHINE\init]
"Depend149"=hex:\32,00
"Launch149"="\Windows\IA_Caller_ID.exe"
in [HKEY_LOCAL_MACHINE\SOFTWARE\IA Style\IACWPlugin\IA Caller ID]
changed "Path"="\Windows\IA_P_Contacts.exe"into "Path"="\Windows\PhotoContacts.exe"
remove [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3rdversion]
"CallerID"="B3.2"
thanx :lol:
i will give it a try...
thanx a lot...
now i have it working here...
but a little problem...
sometimes it forgets the ringing tone and the phone rings as the defualt tone...
my tones are stored on the SD card...
what's the problem?
I have the same problem.
Now, I've changed the store of picture and ringtone into my device ,not in SD card.
I have found problem in WM2003SE with SD card. Everytime, your device is off and suddenly turn-on ,SD-card cannot be detected.
i am using ROM 1.72WWE with my XDA2...
i have moved the ringing tones to the internal storage...
it's working until now !
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
zairyaab said:
When I try to install Caller_ID_WWE_RC10.CAB, it says the file is in rom or in use ?? Try Again Or Cancel ??
Click to expand...
Click to collapse
Bcz the old IA CALLER ID is still running and you didn't delete it files that's why it's working with you.
First of all delete the IA caller Id shortcut from the \WINDOWS\Startup , reboot the ppc, then delete the files manually as it's posted before in this thread.
Good luck..
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Joao_Caldeira said:
Following instructions step by step this worked perfectly.
THANKS
Joao Caldeira
Click to expand...
Click to collapse
same here!
i3oyi3astos said:
CAB wont install, i was running it from the SD card. It tells me that the file is in ROM and cannot be installed.
How do i run the CAB file
Click to expand...
Click to collapse
same problem with me IA_contact can not be replace, but when i copy it to my Extended ROM and run configurator to add it to my config, then hard reset it, it installed properly.
there are two downloads in this forum. Which one should i download? I have an unlocked o2 xda IIs in english.
one is WWE and the other is ITA. Guess :lol:
the WWE is World Wide English : ver 1.20, the other is an old Italian 1.0 I think
Hello :
How can i upgrade my HTC TyTN with the imate rom ?
I only get 99 % ....everithing works after that ....except mms... that ive notice.
Any ideas ?
Luis
The upgrade stopped because same cabs need a Imate IMEI....
You need to put the extended memory in the card, soft reset when the fist installation stop, an install manually tha cabs yuo need from the card.
I solved also the MMS problem.
I suggest to use fit4cat tweaker to show the TyTn EXT_Rom content. Save the MMS cab on your computer, then Upgrade to I-Mate rom (look at Wiki, http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades )
During I-mate personalizzation the phone will "freeze"... don't worry just soft reset. just config date, time zone, international setting, then install the TyTn mms cab an configure the MMS
TyTN MMS Ext. Rom CAB File
As I was not aware that the iMate MMS CAB was only installed to specific IMEI devices I did not save the TyTN Ext. Rom to my PC before installing the imate JasJam ROM.
Does anyone have a copy of the TyTN MMS CAB file to save me having to re-install the HTC (QTEK) ROm and then save the file and then install the JASJAM Rom?
Thanks
Mike
Re: TyTN MMS Ext. Rom CAB File
all extended roms are here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Thanks for that -
I have seen how to unhide the Extended ROM folder and have succesfully done this, however if I try to delete some of the unwanted CAB files I get a message saying the disk is write protected and if I try to copy the TyTN CAB files to the Extended ROM I get he same message - does anyone know how to 'unlock the Extended ROM?
Thanks
#EDIT#
I have installed the CAB in the Temp folder and run it from there - I know have MMS, I then re-ran the Orange CAB and it installed all the correct MMS Settings. I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
paulesport said:
If i soft reset before any customizations after a hard reset....and i install cabs from extended rom manually. Will this take up more main memory than if it had installed/customized on its own?
Click to expand...
Click to collapse
no, it will take the same amount of memory.
mike.bradshaw said:
I would still like to remove the unwanted CAB files from Extended Sotrage and install the TyTN ones I do want, so if anyone has any idea I would appreciate it. Thanks Mike
Click to expand...
Click to collapse
Try using fit4cat, il should work..
http://forum.xda-developers.com/viewtopic.php?t=61060&highlight=
BT fixed?
Just curious, does this upgrade fix bluetooth issues, like A2DP skipping?
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
Hello :
I have upgraded to jasjam rom...but i cant get mms ...
I click on Default_MT_Shortcut-MMS-Hermes.CAB but after a soft reset desapear.
I have extended rom visible...
Help wil be gratefull
Thnks in advance
after a soft reset mms desapear
error
Solution to MMS Problem in TyTN->I-Mate Rom Upgrade
1) download from http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms TyTN Extended Rom
2) Unrar the file, copy the file named MT_Shortcut-MMS-Hermes.cab anywere in your TyTN
3) Run in your phone the file MT_Shortcut-MMS-Hermes.cab and MMS will be in your phone again.
4)if isn't the same used for internet, config the MMS access point (APN) in start menu>settings>connections tab, then connections icon, click the tab Advanced, select network, New, add and conf My MMS network (APN, Username, Password)
5) Go to Messaging, MMS and config MMS parameters (gateway....)
6) Try your Internet UMTS-GPRS connection, if your phone try to connect using the MMS connections, tap on settings and restore My ISP connection as default for internet. (Stupid software, it automatically try to use the last network configured...... )
Thkns but already try with the cab from dopod and and htc.
I upgrade again with complete upgrade with rom form htc and is working.
To bad o cant use imate.
Just installed this
NEW XDA ATOM EXEC WM6 AKU0.7.0 WWE
I go contacts and select new.
Then it pops up telling me to input
Name:
Number:
But my friend has 2 number, mobile phone and home..how do i go about it? Also in SIM card manager u can only put one number beside each name wtf
any other contacts program i can download to fix this?
davidw89 said:
Just installed this
NEW XDA ATOM EXEC WM6 AKU0.7.0 WWE
I go contacts and select new.
Then it pops up telling me to input
Name:
Number:
But my friend has 2 number, mobile phone and home..how do i go about it? Also in SIM card manager u can only put one number beside each name wtf
any other contacts program i can download to fix this?
Click to expand...
Click to collapse
Dear brother u r senior enough to have asked this question in the already open thread at http://forum.xda-developers.com/showthread.php?t=333165 . However, u should first time enter the name and number save it and then go to contacts open the same contact and edit, u will get a heck of long details u wanna add to this contact.
This is bugging the heck out of me.
On my WM 6.1 roms this fix is implemented but i have yet to see it in the smartphones. Is there a way?
I would like to keep an install cabs directory on my wife's micro sd but i can't seem to find a way to stop it from deleting the cabs after i install them.
(I may just not be wording my searching correctly but any help would be appreciated)
Mine stay put after install. Check your registry key named nDynamicDelete @ HKLM\Software\apps\Microsoft Application Installer\
Mine has a value of 2. You can also use CabInstl instead and have the option to select where to install and when to delete or not.
h4waii said:
Mine stay put after install. Check your registry key named nDynamicDelete @ HKLM\Software\apps\Microsoft Application Installer\
Mine has a value of 2. You can also use CabInstl instead and have the option to select where to install and when to delete or not.
Click to expand...
Click to collapse
Thanks... I'll check tonight on her phone. Mine also do with WM6.1 PRO on my wizard, but hers do not with gnatgosplat's star trek wm6.1 rom.
ROCOAFZ said:
Thanks... I'll check tonight on her phone. Mine also do with WM6.1 PRO on my wizard, but hers do not with gnatgosplat's star trek wm6.1 rom.
Click to expand...
Click to collapse
Let us know how that goes but also you can change
HKCR\cabfiles\shell\Open\Command\(default) = \Windows\wceload.exe "%1"
TO
HKCR\cabfiles\shell\Open\Command\(default) = \Windows\wceload.exe "%1" /nodelete
Thanks!
JZ
ROCOAFZ said:
This is bugging the heck out of me.
On my WM 6.1 roms this fix is implemented but i have yet to see it in the smartphones. Is there a way?
I would like to keep an install cabs directory on my wife's micro sd but i can't seem to find a way to stop it from deleting the cabs after i install them.
(I may just not be wording my searching correctly but any help would be appreciated)
Click to expand...
Click to collapse
Just make your cabs "read only" and then they won't get deleted. No registry edit required.
This is my first post, so apologies if this is in the wrong place or has been asked before (I have searched and found some answers, but none of these worked)
Basically, last night whenever I tried to use an application on my HTC HD2 I was getting the following error message:
"The file xxx cannot be opened. Either it is not signed with a trusted certificate, or one if its components cannot be found. If the problem persists, try reinstalling or restoring this file."
In searching for the solution, a lot of people are saying that I need to edit the reistry. (Specifiaclly HKEY_LOCAL_MACHINE\Security\Policies\Policies DWord = 0000101a - Change value from 0 to 1)
I have tried downloading the recommended registry editors on the forums (Resco Explorer etc.) but am unable to install because the "program is from an unknown publisher." I click yes to get pass this initial message, like I always have done in the past, and the following is displayed:
Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate."
I have also tried using a program recommended called CeRegistryEditor and using my PC via ActiveSync to edit the registry, but am getting an error message "Access Denied!".
Does anybody know any other way of editing the registry? Am I actually doing the right thing? Are there any security settings that I need to disable to allow CeReistryEditor to edit the registry?
This is really bugging me, I have only been without my apps for about 12 hours throughout the night but it is hard to live without them!! I REALLY don't want to perform a hard reset and will do anything to avoid this!
When I get this I just remove evertyhing to do with it on the phone and re download it (the cab file usually) and it seems to work.
thanks for your reply. I have tried this but when I try and reinstall I am getting the message: Installation was unseccessful. The program or setting cannot be installed beacause it is not digitally signed with a trusted certificate.
I think that the security settings have been changed, but I cant see how to change them with editing the registry which I am struggling to do
Can I ask what app you are trying to install? Or is it any app?
Multiple Apps that were running OK yesterday, but not today. I think it is all the apps that I have downloaded from Omarket.... Omarket isnt working either!
Hi,
Any luck on this. I m also facing similar issue after installing Android on my HD2.
I have the exact same issue after running Android from SD card. No application (non-stock ones) are working anymore. Like 3rd party certificates are being blocked or something...
For everyone with this problem, download Mobile Registry Editor and connect your phone to your PC via USB, then start the Editor and go to "HKEY_LOCAL_MACHINE\Security\Policies\Policies" and search for the DWord "0000101a" and change the decimal to "1", that will fix your problem. This problem happens to me if I "reboot" while in Android instead of turning the phone completely off and then back on.
Edit: Added link to download.
As a side note, I always did this to mine while running Windows Mobile, then booted Android after fixing the registry.
and when this is not possible
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Niine said:
Hi,
i have the same issue after loading android from the sd-card.
But, i am not able to change the reg, access denied, also with ceregistry unlock tool.
So, what can i do?
regards
Nine
Click to expand...
Click to collapse
Hi,
I also have the same issue after loading android from the sd-card. I have also re-installed the stock rom and the problem still persists. Im also unable to install any reg editors as keep getting the "not signed with a trusted certificate".
I read that a cooked rom may be a solution around this but I liked the set up I had and wanted to keep my original rom so any other suggestions would be appreciated.
Thanks
Lee
Exactly the same problem.
Non-stock programs not working after failed boot of android from SD card, and I'm unable to change any registry entries either. Practically I'm locked out of my phone, just the basic functions working. Any help would be greatly appreciated!
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
I have the same problem, just remove the program that was not working, pull out your memory card , then delete the files in the sd card except the application installer, hard reset your phone, and remember to go to SETTINGS-UPDATES&FEEDBACK-ERROR REPORTING-DISABLE ERROR REPORTING, and turn off your phone, put in the memory card and turn your phone on and install the application one by one, the application installed will work as normal, Good Luck, remember to back up your data before hard reset
larrytango said:
if forget where I originally found this link (its on xda some place)
http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
but run this first and you no longer get the access denied when using the mobile registry editor , hope it helps.
Click to expand...
Click to collapse
i tried this methode but unfortunately this message pops up all time:
"phone is not unlockable"