Hey guys, need a little help here, i'm using a dopod 838 pro and using CRCs 13.3 rom here, how do I flash hard sspl into it? thks...
download it here: Hard-SPL-V7.zip
It's located at the top of this section of the forum. http://forum.xda-developers.com/showthread.php?t=296722
It installs basically just like flashing a rom. run the RUUwrapper.exe just like you did when you flashed crc's
Or use the instructions on page 116, post 1160 to flash via sd card. Just remember the sd card has to be 2Gb or less and formatted FAT32.
Cheers...
warrenlee713 said:
Hey guys, need a little help here, i'm using a dopod 838 pro and using CRCs 13.3 rom here, how do I flash hard sspl into it? thks...
Click to expand...
Click to collapse
i have this problem too, each time i flash my dopod with any HARD SPL it alway get stucked after entering bootloader screen, the USB Hub automatically closed.
somebody please help me!!!!
mine is dopod 838 i-mate JASJAM from Dubai, with SPL 2.03
recomend me if u know any ROM suitable for it to be flashed.
my Jasjam has problem too!
it's has bootloader 2.03 and i can not HSPL for it. now it's startup into splash screen and stuck!!!!!
what is your bootloader version? IPL-1.01 or else?
coz, i've just successfully changed my SPL-2.03 to SPL-2.60. olipro, further i have successfully cooced my ROM to WinMo 6.1 Black Satin.
try to flash your bootloader with Hard SPL v9, and i assure u will get what u want,
Related
i upgrade the ROM using this :
http://forum.xda-developers.com/showthread.php?t=283965
but I would like to downgrade it again to send for repair ...
i cannot flash it back to the original IMATE JAMIN rom , always stop at 95%.
Please help.
Just wait, suddently it continue.
Regards
"Just wait, suddently it continue."
No, it doesnt. Error msg comes out and forces you to it.
SPL can not be easily downgrade by flashing ROM in a G4.
Same problem
I have same similar problem.
I created new topic. I guess my topic more explanatory.
Lets go on here -> http://forum.xda-developers.com/showthread.php?t=331474
thanks..
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
nForce said:
NOW it is possible to downgrade SPL. Just flash HardSPL, after that you can DOWNGRADE SPL to any SPL you want!!!
Click to expand...
Click to collapse
When you first flashed HardSPL, which verson of the SPL was shown after reboot? That, what you had before, or the new one, of the HardSPL? I am asking, because I managed to keep the original O2 2.15 SPL and I really dont want to channge it (for repair reasons
After flashing the patched HardSPL I see 2.G4.4PDA (I have a G4 XDA Neo)! But the good news are that you now can flash all SPL versions you want, like the original 2.15 when it's inside of your ROM image and you can see it after rebooting!
How to use Hard SPL if a can't pass bootloader?
I tryed hard SPL, but after upgrading it back to 2.20.001., and I can't pass even to "Windows mobile" screen and it is frozen this position.
Any suggestions?
Thanks
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
Guys...
I am planing to upgrade my dopod 838pro (hermes100) to 6.1
I am using WM6.0 now. After using few mounths..,i felt the phone become so slow. And the rom memory is only 3.00mb left.
therefore i wanna reinstall the 838pro...
however,i don't know which one of ROM i can use
and...also the steps...
please...help
I am using wm6.1 pdaviet rom download from
http://forum.xda-developers.com/showthread.php?t=390603
and found very fast. try this one
Steps:
1 - Do hard spl v7 before updating rom from below link
http://forum.xda-developers.com/showthread.php?t=296722
2 - After Downloading rom run RUU utility and install by selecting spl 2.02/2.10/2.30 new bootloader and follow steps
i tried and error[260] exsist.
it said that i am not connect USB well.
Try sd card method. You will have to have Hard SPL on your Hermes though. REALLY don't understand why anyone wouldn't....
Cheers...
Hello i have Orange SPV M3100 Running WM5, i would like to upgrade it to WM6. i have tried to HardSPL to 2.10 but it just keeps giving me an error, currently i have 1.40 olipro installed. is there a way to do the hard spl, cos i cant think of a thing, all i need to do is hard spl, ive upgraded the radio already so all i need now is the updated bootloader, then im ready to go.Please, can some1 help me out please
Check out the last page of the Hard SPL thread, page 145, it has instructions on how to install Hard SPL V7 using the sd card...
ok guys im not a total noob in flashed but id like to be safe than sorry...so anyone can point the way to a step by step on hardspl hermes? lol this is well my forth fone being flashed(2x wizards,kaiser) killed my first wizard flashed G3 rom on a G4 i knw i knw i suck.lets hope that never happens again.anyway any feedback will help thankz.
Go to the sticky about Hard SPL, download Hard SPL V7 from 1st page then go to page 116, post 1160 for sd card method...
Hope this helps...
yeah thankz will check it out
Check out this link, i think it'll also help u out
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
ok thanks guys got my hermes yesterday and downloaded hard spl v7,quick question do i need to install sim and cid unlocker v3a or should i just run the hard spl Ruu and flash it?
1 more lame noob question lol do i have to flash my rom with the sd card method?
Sim and CID unlocker is required just to unlock ur ppc to use on any sim, as the super cid function is already merged in hard spl v7.
Try to use the sd card method, as the risk factor is minimal in this method as compared to active sync method. as there are may cases of broken usb connections here.
hey guys thanks i finally did it!!!! i used activesync method because only getting my sd card later on today,my bootloader is now ipl 1.04 spl 2.04 olipro. heres the steps i followed firstly downloaded hard spl v7,then fully connected to activesync,i ran the RUU but instead of getting the red option like everyone descriped it said "force sspl" anyway i continued and followed the prompts and it worked!! so now i got my herm200 ready to flash a custom rom.thanks to everyone who helped and happy flashing guys....one last question though now after i download a rom of my choice can i just run the RUU and flash it?
sorry posted my new spl wrong. its ipl 1.04 spl 2.10.olipro
Cool, yeah you should be able to though I'd use the sd card method to flash - just drop the steps using SSPL.exe... Its a hell of a lot safer and I wouldn't do it any other way for a radio rom, stuff up a radio rom flash you can pretty much kiss the phone functions goodbye...
Cheers...