OK i have done some searching and this sounds like a good one. http://forum.xda-developers.com/showthread.php?t=461524
Then i want to make shure i can get it back to the original rom i have right now so in case it breaks. this it? http://forum.xda-developers.com/showthread.php?t=427507&highlight=dump
Then do you guys know if in this rom it already has gps unlocked or do i have to do the bored thing? http://forum.ppcgeeks.com/showthread.php?t=49933
Then this is my first time doing this. is there anything else i am missing?
First, have you unlocked your phone? This is a must!!
Second, you do have to follow the steps from bored to unlock the GPS.
Third, check out bored's ROMs and kitchens on this forum. Updated today!!
Also, you can revert back to the original ROM and re-lock your phone if neccasary. So no worries. Also, for better signal strength you can also try a new radio (sticky on ppcgeeks). May not help but if you have weak service now, these could give you more bars and extend your battery life.
OH, and if your still on the stock ROM....WOW. You are about to LOVE your phone!! Its like a different phone with a custom ROM, SOOOO much faster
stanglifemike said:
OH, and if your still on the stock ROM....WOW. You are about to LOVE your phone!! Its like a different phone with a custom ROM, SOOOO much faster
Click to expand...
Click to collapse
AMEN!!!!!!
stanglifemike said:
OH, and if your still on the stock ROM....WOW. You are about to LOVE your phone!! Its like a different phone with a custom ROM, SOOOO much faster
Click to expand...
Click to collapse
ya i dont have a rom installed yet and i want a guide on how to install.
So first i have to unlock. Can it be relocked for warrenty.
Then i have to install the rom i have above. Can i install it back to the original rom on my touch pro. and if so how?
then i have to do the bored thing. Can i make so gvps is locked again?
I want to be able to have a new rom but i also want to be able to return it to normal for warrenty.
ReaperBoy said:
ya i dont have a rom installed yet and i want a guide on how to install.
So first i have to unlock. Can it be relocked for warrenty.
Then i have to install the rom i have above. Can i install it back to the original rom on my touch pro. and if so how?
then i have to do the bored thing. Can i make so gvps is locked again?
I want to be able to have a new rom but i also want to be able to return it to normal for warrenty.
Click to expand...
Click to collapse
I am not too familiar with XDA myself but PPCGeeks I would say is a better resource for your Verizon TP. I will post a few links that answer every one of your questions but you'll have to do a little reading yourself......
Unlocking and Relocking for Warranty Repair
Guide To Flashing
lllbored GPS Fix (very easy to do and includes the cab to revert if necessary)
Thread About RELOCKING for Warranty
In my Opinion these are all very easy things to accomplish as long as you made sure you READ the instructions throughly before attempting. Good Luck!
If i have a data connection will that get charged like double when i reastivate my phone? and were and how would i get my rom back to stock?
ReaperBoy said:
If i have a data connection will that get charged like double when i reastivate my phone? and were and how would i get my rom back to stock?
Click to expand...
Click to collapse
Stock CDMA ROMS
Not sure why you would think your Data plan would double???? I havent had any issues with my data plan changing except when buying a new device and they "assume" you want the Enterprise plan. As long as you made sure Verizon set you up on the $29.99 plan in the first place then it shouldnt change to my knowledge....... DONT CALL VERIZON AND TELL THEM THAT YOU UNLOCKED/FLASHED YOUR PHONE , lol.
Your data plan will be fine. Just dont do a lot of tethering if your plan isnt unlimited. Data usage will be the same as before though
GrandMasterB said:
Stock CDMA ROMS
Not sure why you would think your Data plan would double???? I havent had any issues with my data plan changing except when buying a new device and they "assume" you want the Enterprise plan. As long as you made sure Verizon set you up on the $29.99 plan in the first place then it shouldnt change to my knowledge....... DONT CALL VERIZON AND TELL THEM THAT YOU UNLOCKED/FLASHED YOUR PHONE , lol.
Click to expand...
Click to collapse
Lol no i am not that stupid! and all i see for verizon is the leaked rom? i dont knwo if i want to use this.
ok unlocking seems very easy. But now the flashing WOW. I wish there was a video tut for this because this seems pretty easy to screw %$#@ up. Could some one possibly make one?
ReaperBoy said:
Lol no i am not that stupid! and all i see for verizon is the leaked rom? i dont knwo if i want to use this.
Click to expand...
Click to collapse
Little history about that , bout 6 months ago I was helping someone in the CrackBerry forums flash a leaked beta on their Curve , they got confused , called Verizon for help flashing and of course were told that they had Violated customer agreements and the device warranty and how they were going to burn in hell for sinning against Verizon. This person then comes back to the forums furious at everybody that had been trying to help because WE had "voided" their warranty. Just wanted to make sure you werent going to do the same and be mad at me
That ROM is the leaked SHIP Rom that comes on the Verizon TP. Double check your Settings/System/Device Information if your not sure. Like I said in the post I linked above ,I have unlocked , flashed (MANY TIMES) and relocked and flashed the Verizon leaked rom so I could send it back and had NO issues whatsoever.
EDIT : Flashing a new rom is just as easy as unlocking was. Which ROM have you chosen for your first one??
GrandMasterB said:
Little history about that , bout 6 months ago I was helping someone in the CrackBerry forums flash a leaked beta on their Curve , they got confused , called Verizon for help flashing and of course were told that they had Violated customer agreements and the device warranty and how they were going to burn in hell for sinning against Verizon. This person then comes back to the forums furious at everybody that had been trying to help because WE had "voided" their warranty. Just wanted to make sure you werent going to do the same and be mad at me
That ROM is the leaked SHIP Rom that comes on the Verizon TP. Double check your Settings/System/Device Information if your not sure. Like I said in the post I linked above ,I have unlocked , flashed (MANY TIMES) and relocked and flashed the Verizon leaked rom so I could send it back and had NO issues whatsoever.
EDIT : Flashing a new rom is just as easy as unlocking was. Which ROM have you chosen for your first one??
Click to expand...
Click to collapse
all right and then when i am unlocking you get the screen on your computer with a picture of the touch pro and it has you accept the agreements. i have not done this yet but what does that do because it does not seem like that is the unlocker.
Damn this seems harder then putting custom firmware on a psp wich i did with ease.
ReaperBoy said:
all right and then when i am unlocking you get the screen on your computer with a picture of the touch pro and it has you accept the agreements. i have not done this yet but what does that do because it does not seem like that is the unlocker.
Damn this seems harder then putting custom firmware on a psp wich i did with ease.
Click to expand...
Click to collapse
I have had 3 different PSP's and never dared flashed the firmware on one , lol , but this is EASY. All you have to do is litterally follow the onscreen instructions.
GrandMasterB said:
I have had 3 different PSP's and never dared flashed the firmware on one , lol , but this is EASY. All you have to do is litterally follow the onscreen instructions.
Click to expand...
Click to collapse
ok that part seems really easy. but the flashing part? http://forum.ppcgeeks.com/showthread.php?t=43266
I am looking at this one and it has alot of words and i was reading and i dont get when you put the rom in.
this is were i get lost
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
Oh and i just for fun did the power and down volume key and i went to the 3 color thing and it says security unlocked and i dont think i unlocked it yet......
ReaperBoy said:
ok that part seems really easy. but the flashing part? http://forum.ppcgeeks.com/showthread.php?t=43266
I am looking at this one and it has alot of words and i was reading and i dont get when you put the rom in.
this is were i get lost
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
Oh and i just for fun did the power and down volume key and i went to the 3 color thing and it says security unlocked and i dont think i unlocked it yet......
Click to expand...
Click to collapse
and i have been reading and i think i take the ruu thing in my roms folder and put it into the RUU folder on my desktop?
ReaperBoy said:
and i have been reading and i think i take the ruu thing in my roms folder and put it into the RUU folder on my desktop?
Click to expand...
Click to collapse
That is dependant on which ROM you choose......... which rom did you choose?
Most roms are alot easier than that now.
EDIT** If it says .35 cmonex in bootloader then it IS unlocked. Nothing against XDA but for your CDMA Touch Pro you reallly need to be over at PPCGeeks for this. That Crossler post you linked to hasnt been updated for 3 months now. Crosslers Kitchen on PPCGeeks was updated yesterday , just a thought
Related
Hi,
I am new to the whole ROM updating thing.
Can som1 plz post detailed instructions on how to flash to a new rom.
plz, dont give me a link to a diff thread, i tried and am confused. give me new instructions, maybe also with pictures, i have been trying to update to dcd's roms for the last 2 weeks but am having lots of trouble.
thx
ElementX
i didnt get much help right away but i managed eventually
so...
the things you need is a unlocker, a custom bootloader, the rom you want to flash, and an updated radio to use the rom.
for the unlocker/custom bootloader you want to find a thing called
"Hard-SPL-240-MFG"
then in there run "titanunlocker" that will unlock your phone and install the newest custom bootloader.
after that you phone should get past the bootloader, and maybe freeze on the splash screen, if not do a hard reset (hold the power button and the 2 softbuttons at the same time)
flash the rom you downloaded.
then flash the new radio.
theres a couple vital steps in between though, and i dont feel like writing a full instruction right now
if you pm me your msn ill walk you through it.
-dont use vista , its possible to use vista just a lot harder.
-what brand is your phone, who is the provider.
Berserk87 said:
i didnt get much help right away but i managed eventually
so...
the things you need is a unlocker, a custom bootloader, the rom you want to flash, and an updated radio to use the rom.
for the unlocker/custom bootloader you want to find a thing called
"Hard-SPL-240-MFG"
then in there run "titanunlocker" that will unlock your phone and install the newest custom bootloader.
after that you phone should get past the bootloader, and maybe freeze on the splash screen, if not do a hard reset (hold the power button and the 2 softbuttons at the same time)
flash the rom you downloaded.
then flash the new radio.
theres a couple vital steps in between though, and i dont feel like writing a full instruction right now
if you pm me your msn ill walk you through it.
-dont use vista , its possible to use vista just a lot harder.
-what brand is your phone, who is the provider.
Click to expand...
Click to collapse
i have a sprint mogul...and i use xp...and i dont have msn...
and thank you
Hey Berserk would you be so nice to go over it with me? I just bought a HTC XV6800 from Verizon. Interested in this Flash. What is your MSN?
Thanks
Berserk87 said:
i didnt get much help right away but i managed eventually
so...
the things you need is a unlocker, a custom bootloader, the rom you want to flash, and an updated radio to use the rom.
for the unlocker/custom bootloader you want to find a thing called
"Hard-SPL-240-MFG"
then in there run "titanunlocker" that will unlock your phone and install the newest custom bootloader.
after that you phone should get past the bootloader, and maybe freeze on the splash screen, if not do a hard reset (hold the power button and the 2 softbuttons at the same time)
flash the rom you downloaded.
then flash the new radio.
theres a couple vital steps in between though, and i dont feel like writing a full instruction right now
if you pm me your msn ill walk you through it.
-dont use vista , its possible to use vista just a lot harder.
-what brand is your phone, who is the provider.
Click to expand...
Click to collapse
Elementx2 said:
i have a sprint mogul...and i use xp...and i dont have msn...
and thank you
Click to expand...
Click to collapse
ok, heres the important part.
you need to make sure you have your PST info writen down, because if you lose that you wont be able to send/receive calls.
theres a small tut posted on the rom page.
http://forum.xda-developers.com/showthread.php?t=362563
My Vibrant is telling me that T-Mobile has kindly sent me an update. I think it must be the GPS fix. It is rather persistent in that it won't let me choose when to install it. It will only allow me to delay for at most a day. This is quite annoying as I am preparing for a trip and really don't want to mess around with my phone right now.
I am running Vibrant9. Do I want to install this update? Is it gonna break anything? Thanks!
JJMT said:
My Vibrant is telling me that T-Mobile has kindly sent me an update. I think it must be the GPS fix. It is rather persistent in that it won't let me choose when to install it. It will only allow me to delay for at most a day. This is quite annoying as I am preparing for a trip and really don't want to mess around with my phone right now.
I am running Vibrant9. Do I want to install this update? Is it gonna break anything? Thanks!
Click to expand...
Click to collapse
Shouldn't break anything. Most are still waiting for the update. Personally I was impatient and flashed it through ODIN last night.
OK. I accepted the update. Phone is now stuck on "Vibrant" at reboot. Sigh. Proceeding to trying to restore ROM.
JJMT said:
OK. I accepted the update. Phone is now stuck on "Vibrant" at reboot. Sigh. Proceeding to trying to restore ROM.
Click to expand...
Click to collapse
Go to the Development section that are a few threads about this. I looks like anyone with a lag fix, or GPS fix (from JI2) where having this issue, plus I have seen stock people having it too.
Or you can go read my blog post here. the post tells the steps I took to get back the JFD, but you could flash JI6 instead.
you will need to flash JI6 with ODIN to restore, you can not just do a nandroid restore, it is an issue with the kernel and nandroid does not restore/backup the kernel.
*facepalm*@Samsung
http://forum.xda-developers.com/showthread.php?t=803492
Anderdroid said:
*facepalm*@Samsung
Click to expand...
Click to collapse
It's not Samsung or T-Mobile.. its that the OP performed tweaks so the ROM wasn't a 100.00% version of Stock. Tweaks including lag fixes, GPS fix, etc can cause this.
Personally, I don't know why if you're performing tweaks on your phone and are on a stock ROM. If you're going to tweak your phone, go the full way and tweak everything.
This is why t-mobile had the G2 nand locked..... so this type of user error won't cost them millions, replacing phones that the user messed up with blind stupidity.... that's only for the ones under warranty, you can still call in a lost phone and get replacements..
dan0zone said:
This is why t-mobile had the G2 nand locked..... so this type of user error won't cost them millions, replacing phones that the user messed up with blind stupidity.... that's only for the ones under warranty, you can still call in a lost phone and get replacements..
Click to expand...
Click to collapse
So now instead, they get flooded with returns because the phone isn't what people expected.
zephiK said:
It's not Samsung or T-Mobile.. its that the OP performed tweaks so the ROM wasn't a 100.00% version of Stock. Tweaks including lag fixes, GPS fix, etc can cause this.
Personally, I don't know why if you're performing tweaks on your phone and are on a stock ROM. If you're going to tweak your phone, go the full way and tweak everything.
Click to expand...
Click to collapse
That's not true, it is Samsung/T-Mobile fault. I know 3 people with 100% stock, unrooted, vibrants, 2 of them got stuck when they updated. the t-mobile forums filled with stock users with their phone stuck at the vibrant screen as well.
camalot said:
That's not true, it is Samsung/T-Mobile fault. I know 3 people with 100% stock, unrooted, vibrants, 2 of them got stuck when they updated. the t-mobile forums filled with stock users with their phone stuck at the vibrant screen as well.
Click to expand...
Click to collapse
And what are the chances of this?
Everybody lies.. especially when they're desperate and unwilling to accept the fact that they modified their phone. I don't see any reason why they wouldn't lie to T-Mobile and say that they didn't modify their phones if its "bricked." Because it is not bricked, all it takes is download mode and Odin. There are threads out there that break down on how to use Odin, it's not that difficult to do.
This is why I don't endorse "One Click" anything unless it is a long process. Sure, it makes everything easier but it makes people not think about what they're doing before they do it. Before one clicking, rooting was so simple, put something on your internal sd and boot into recovery and hit reinstall packages. If something like that is too difficult then they shouldn't be doing any modifications in the first place unless they understanding what they're doing.
The T-Mobile forum is not a valid source because there is no concrete proof that they didn't root their phone and modified something. Even rooting and removing bloatware then removing access to root would cause this.
Edit: Looking at the OP's recent posts.. he did indeed run a custom ROM but has possibly did some tweaking after reverting back to stock?
zephiK said:
And what are the chances of this?
Everybody lies.. especially when they're desperate and unwilling to accept the fact that they modified their phone. I don't see any reason why they wouldn't lie to T-Mobile and say that they didn't modify their phones if its "bricked." Because it is not bricked, all it takes is download mode and Odin. There are threads out there that break down on how to use Odin, it's not that difficult to do.
This is why I don't endorse "One Click" anything unless it is a long process. Sure, it makes everything easier but it makes people not think about what they're doing before they do it. Before one clicking, rooting was so simple, put something on your internal sd and boot into recovery and hit reinstall packages. If something like that is too difficult then they shouldn't be doing any modifications in the first place unless they understanding what they're doing.
The T-Mobile forum is not a valid source because there is no concrete proof that they didn't root their phone and modified something. Even rooting and removing bloatware then removing access to root would cause this.
Edit: Looking at the OP's recent posts.. he did indeed run a custom ROM but has possibly did some tweaking after reverting back to stock?
Click to expand...
Click to collapse
Well, I know the 2 people that updated stock and got stuck at the vibrant screen were 100% stock because they both called me on what they need to do. one came over and I fixed it with ODIN back to stock (JI6) and the other just said he'd call TMO and get a replacement. they dont even know what rooting is, or that there is a site like that that they can get files to do "one click root"
OK. I'm the OP and I'm back. I was traveling today (with a phone flashed back to stock - that's as far as I got before getting kicked out of the hotel). I've now got the ROM restored and I'm where I was before trying to install the update.
My question is this (probably simple): my phone still wants to do the update. How do I make it go away? I can't install it, and I don't want to have to postpone it every day. Is there a cache I can clear or something?
You could just update it through Odin. I'm on stock with root and JAC's oc/uv kernel and the OTA failed but Odin worked perfectly.
Yes, I will try to flash it with odin when I have the time and interest, but for now I have neither, and I just want the phone to stop bugging me. Ideas?
JJMT said:
Yes, I will try to flash it with odin when I have the time and interest, but for now I have neither, and I just want the phone to stop bugging me. Ideas?
Click to expand...
Click to collapse
It will only stop once you are on JI6
camalot said:
It will only stop once you are on JI6
Click to expand...
Click to collapse
OK. I guess I will have to try to push the update through odin. Can someone point me to a link to the files?
I'm kind of irritated by this whole thing. I'm pleased with tmo for pushing the update out, but I mean, really, even Windows allows you to decline to install an update.
http://forum.xda-developers.com/showthread.php?t=798125
chad658eku said:
http://forum.xda-developers.com/showthread.php?t=798125
Click to expand...
Click to collapse
Thanks for the link. It really looks to me that I'm going to need to flash to a stock ROM before flashing JI6. That, as they say, is a bummer.
As I am actually quite content at the moment with Vibrant9, it really seems to me that it would be easier to somehow remove whatever it is on my phone that is requesting that I update. Presumably there is an update.zip file sitting somewhere, that will be copied into sdcard before the updater involves reboot recovery. Any ideas where to look?
I would really rather not do any further flashing until is an official Froyo to flash to.
JWhipple said:
So now instead, they get flooded with returns because the phone isn't what people expected.
Click to expand...
Click to collapse
Flooded with returns by morons who think they are smart.
Please go here now: http://forum.xda-developers.com/showthread.php?t=1653777
Mods should unsticky mine and sticky that instead.
Go to the above link if your a victim of virgin mobile firmware.
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
hockey4life0099 said:
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
Click to expand...
Click to collapse
So you have no data at all? I'd try a ##data# reset first.
hockey4life0099 said:
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
Click to expand...
Click to collapse
Never assume. Just because VM has a different firmware, that doesn't mean that Sprint 3d's will too. We do not fully know what the differences are between the 2 devices.
Thus the reason for this and other fix threads. I would suggest trying this fix, and see if it helps, and hope that there is a firmware fix in the future.
I will tell you how I restored my data. I first downloaded the following stock rom.
Stock 2.08.651.2 With HTC/Sprint Spyware Removed
http://forum.xda-developers.com/showthread.php?t=1285975
After flashing to the stock rooted rom above I then went into my dialer and typed in ##my MSL number# (Example: ##000000#) To get your MSL number simply download MSL reader from the market. I then clicked on edit and then edited my MDN with all zeros and MSID with all zeros. I pressed the menu button and then pressed reset. After the phone rebooted the phone activation screen came up when I unlocked the phone and it was able to automatically activate it and I got 3G data.
jlechner said:
So you have no data at all? I'd try a ##data# reset first.
Click to expand...
Click to collapse
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
hockey4life0099 said:
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
Click to expand...
Click to collapse
This is the issue some are having. I would say it's because of the VM firmware we flashed. Did you try the PRI version downgrade that takes you back to 003 even though it shows 005? or does yours still say 004?
hockey4life0099 said:
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
Click to expand...
Click to collapse
Hockey, I have not seen this issue yet on my rom, PM me if you want to try mine, and let me know if you see any difference. I wonder if some of the SMS issues have to do with the ICS rom itself. BTW do not post my ROM anywhere as I do not release my stuff public, just want to help out a fellow hardcore flasher.
Cheers
jlechner said:
This is the issue some are having. I would say it's because of the VM firmware we flashed. Did you try the PRI version downgrade that takes you back to 003 even though it shows 005? or does yours still say 004?
Click to expand...
Click to collapse
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Freeza or Unknownforce, I have a guy getting a replacement phone tomorrow. He wants to help. I figured we could have him pull the partitions, please advise.
hockey4life0099 said:
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Click to expand...
Click to collapse
Touch base with Mikey.
hockey4life0099 said:
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Click to expand...
Click to collapse
Oh perhaps you need to be on PRI version 1.42_003? I never ran into issues on chad's downgrad PRI either though.
This thread can't be deleted. This has good info we need up.
I know it says Chad in it, but should we just take the name out?
Well, if we did, then we won't give credit where it's due.
Anyways,
Is there any general thought on the rough percentage of people this works 100% for?
Mikee4fun said:
Oh perhaps you need to be on PRI version 1.42_003? I never ran into issues on chad's downgrad PRI either though.
Click to expand...
Click to collapse
is there a way to get to 1.42_003?
Thank god there's another one of these!
Ok so I got back from sprint again and the were totally in awe and had no idea whatsoever was wrong with my phone They ordered me a new one and it'll be here on like tuesday or wednesday and i'll see if I can get it not activated already.
Btw the sprint people are totally dumb.... They were talking to a couple and saying yeah, the more storage a phone has the faster it'll be! He said that 32gb phones out performed 16gb phones.... I was like wtf man... Also he was trying to sell them the galaxy s 2's and was telling them that they're new phones. Wtf sprint salesman, wtf...
hockey4life0099 said:
is there a way to get to 1.42_003?
Click to expand...
Click to collapse
The 005 mod is actually 003, from my understanding.
Sent from my Sprint/Virgin Mobile hybrid.
jlechner said:
Freeza or Unknownforce, I have a guy getting a replacement phone tomorrow. He wants to help. I figured we could have him pull the partitions, please advise.
Click to expand...
Click to collapse
Thanks, but I think we have everything we need at this point. I'm writing code right now for the patching part of the process. Not that I have everything that I need just yet, but at least getting that part out of the way for when I do have the correct information.
I've located everything that I have to change in my own partition to fix it (All the differences) next I'm going to compare these offsets with those of the partitions that freeza gives me and see if they line up the same... there's going to be some major coding needed for this, because it did manipulate some of the "flow" I think in the way it lists out certain information in the file, like rom name, and phone number and stuff...
I'm not the fastest coder, but I have basically all I need at this point for my own device... I just want to verify that it's similar code on others' devices as well before I get too far ahead of myself here and have to backtrack. I'm actually going to re-code the downgrade tool to make it part of that, probably rename it to a "multitool" of some kind and simply put it into the already stickied thread, and have closeone update his cd with it so that people can do this with ease.
The best part of this all is that the bricking process isn't going to be a stupid timing thing like it is when downgrading... a single command can brick an already S-OFF phone the way we need it. So no confusing timing issues with this one! Just a nice easy set of instructions. Phew.
Short and sweet basic steps right now:
1.) Nand Backup
2.) Brick
3.) Run "multitool" Plug unplug, yadda yadda.
4.) Boot phone back up to 1.40 S-ON
5.) Run 1.13 RUU
6.) Revolutionary S-OFF
7.) Flash 2.17 Firmware
8.) Flash recovery
9.) Restore Backup
10.) Drink Beer
More details to follow.
hockey4life0099 said:
is there a way to get to 1.42_003?
Click to expand...
Click to collapse
Yes, you need to go through the adb push process stated in the OP. I can assist you if you want through team viewer if you don't want to tackle it.
Unknownforce said:
Thanks, but I think we have everything we need at this point. I'm writing code right now for the patching part of the process. Not that I have everything that I need just yet, but at least getting that part out of the way for when I do have the correct information.
I've located everything that I have to change in my own partition to fix it (All the differences) next I'm going to compare these offsets with those of the partitions that freeza gives me and see if they line up the same... there's going to be some major coding needed for this, because it did manipulate some of the "flow" I think in the way it lists out certain information in the file, like rom name, and phone number and stuff...
I'm not the fastest coder, but I have basically all I need at this point for my own device... I just want to verify that it's similar code on others' devices as well before I get too far ahead of myself here and have to backtrack. I'm actually going to re-code the downgrade tool to make it part of that, probably rename it to a "multitool" of some kind and simply put it into the already stickied thread, and have closeone update his cd with it so that people can do this with ease.
The best part of this all is that the bricking process isn't going to be a stupid timing thing like it is when downgrading... a single command can brick an already S-OFF phone the way we need it. So no confusing timing issues with this one! Just a nice easy set of instructions. Phew.
Short and sweet basic steps right now:
1.) Nand Backup
2.) Brick
3.) Run "multitool" Plug unplug, yadda yadda.
4.) Boot phone back up to 1.40 S-ON
5.) Run 1.13 RUU
6.) Revolutionary S-OFF
7.) Flash 2.17 Firmware
8.) Flash recovery
9.) Restore Backup
10.) Drink Beer
More details to follow.
Click to expand...
Click to collapse
Cool thanks!
Sent from my Sprint/Virgin Mobile hybrid.
Hi guys so today I got my art unlocked m8
I tried to update but tells me there is no update and to it will check in the next 48hours
I 've been told to get rid of art room and get HTC official room but I have no idea how I've been looking over the forums and I didn't understand a thing with all the techi talking could anyone help me please kinda clueless
ibma said:
Hi guys so today I got my art unlocked m8
I tried to update but tells me there is no update and to it will check in the next 48hours
I 've been told to get rid of art room and get HTC official room but I have no idea how I've been looking over the forums and I didn't understand a thing with all the techi talking could anyone help me please kinda clueless
Click to expand...
Click to collapse
They pulled the AT&T update. Soooo....just gotta wait.....
ibma said:
I 've been told to get rid of art room and get HTC official room but I have no idea how I've been looking over the forums and I didn't understand a thing with all the techi talking could anyone help me please kinda clueless
Click to expand...
Click to collapse
I'm just guessing this is a case of autocorrect, and you mean "custom ROM" and not "art room"?
How did the custom ROM get on your phone, did you buy it that way or did someone do it for you?
The update won't install with a custom ROM, its true (at least if any system files have been altered, which is usually the case). Also, it won't install with a custom recovery. Might even send you into a bootloop and render the phone unusable.
If you want to return to a stock condition and get the update, you can either read up and learn, or run the RUU to return to stock (bootloader must be locked or you need S-off). In either case, we can help you, but need specifics on how you want to approach it.
redpoint73 said:
I'm just guessing this is a case of autocorrect, and you mean "custom ROM" and not "art room"?
How did the custom ROM get on your phone, did you buy it that way or did someone do it for you?
The update won't install with a custom ROM, its true (at least if any system files have been altered, which is usually the case). Also, it won't install with a custom recovery. Might even send you into a bootloop and render the phone unusable.
If you want to return to a stock condition and get the update, you can either read up and learn, or run the RUU to return to stock (bootloader must be locked or you need S-off). In either case, we can help you, but need specifics on how you want to approach it.
Click to expand...
Click to collapse
oh the lousy autocorrect got me.
I have no idea what im doing lol, im following a tut to install revolution hd rom and so far everything is working perfect lets see what happens after system reboot.
Can I unroot and relock bootloader after custom rom install done ?
Update: restoring old content phone seems faster with better signal, but before custom rom it had 4g signal now seems only 3g
Now that sucks boomsound enable/disbale in settings is gone!
So is extreme power saving gone from status bar
also 4g signal
Signal will not show 4g or 4glte like AT&T [email protected] [email protected]
You could relock and unroot,but then no reason to flash a custom rom.
Those two settings are in settings. And on the m8 443 euro builds some are reporting lesser [email protected]
There are AT&T ROM's available that are tailored to us AT&T/GSM networks
ibma said:
oh the lousy autocorrect got me.
I have no idea what im doing lol, im following a tut to install revolution hd rom and so far everything is working perfect lets see what happens after system reboot.
Can I unroot and relock bootloader after custom rom install done ?
Update: restoring old content phone seems faster with better signal, but before custom rom it had 4g signal now seems only 3g
Click to expand...
Click to collapse
ibma said:
Now that sucks boomsound enable/disbale in settings is gone!
So is extreme power saving gone from status bar
also 4g signal
Click to expand...
Click to collapse
ibma said:
Hi guys so today I got my art unlocked m8
I tried to update but tells me there is no update and to it will check in the next 48hours
I 've been told to get rid of art room and get HTC official room but I have no idea how I've been looking over the forums and I didn't understand a thing with all the techi talking could anyone help me please kinda clueless
Click to expand...
Click to collapse
Just use this guide to flash the ruu for 4.4.3. It only works on att m8. MAKE SURE YOU READ THE DIRECTIONS! You just need to relock your boot loader if you are not s-off
http://forum.xda-developers.com/att...-2-23-502-3-bootable-ruu-pc-required-t2860486
ibma said:
I have no idea what im doing lol, im following a tut to install revolution hd rom
Click to expand...
Click to collapse
This is the exact reason I highly discourage following step-by-step tutorials; and/or using toolkits. You are modding the phone with apparently very little understanding of what you are actually doing. Not only is this very risky, as it might result in damage to you phone. But it also leaves you completely unequipped to handle any problems.
My suggestion is to spend a few hours reading the basic information that the folks here have taken the time to compile. This isn't "techie" stuff, this is the basic information and concepts that should be understood before doing any modding of the phone. Quite simply IMO if you don't understand the basics, you have no business rooting/modding the phone.
exad's excellent guide: http://forum.xda-developers.com/showthread.php?p=52484527
FAQs: http://forum.xda-developers.com/showthread.php?t=2711073
Index of AT&T M8 resources: http://forum.xda-developers.com/showthread.php?t=2751432
Index of "international" M8 resources (most apply to AT&T version): http://forum.xda-developers.com/showthread.php?t=2694600
redpoint73 said:
This is the exact reason I highly discourage following step-by-step tutorials; and/or using toolkits. You are modding the phone with apparently very little understanding of what you are actually doing. Not only is this very risky, as it might result in damage to you phone. But it also leaves you completely unequipped to handle any problems.
My suggestion is to spend a few hours reading the basic information that the folks here have taken the time to compile. This isn't "techie" stuff, this is the basic information and concepts that should be understood before doing any modding of the phone. Quite simply IMO if you don't understand the basics, you have no business rooting/modding the phone.
exad's excellent guide: http://forum.xda-developers.com/showthread.php?p=52484527
FAQs: http://forum.xda-developers.com/showthread.php?t=2711073
Index of AT&T M8 resources: http://forum.xda-developers.com/showthread.php?t=2751432
Index of "international" M8 resources (most apply to AT&T version): http://forum.xda-developers.com/showthread.php?t=2694600
Click to expand...
Click to collapse
What i did is i unocked, rooted, then installed twrp, took nanodroid backup and installed custom rom, would it cause any issues if i factory reset the phone ?(will it reset to at&t room that came with the device)
ibma said:
What i did is i unocked, rooted, then installed twrp, took nanodroid backup and installed custom rom, would it cause any issues if i factory reset the phone ?(will it reset to at&t room that came with the device)
Click to expand...
Click to collapse
Again, you need to learn and research more before doing anything. This is another perfect example. Factory reset doesn't do anything to the ROM. All it does is wipe the user data partition, and isn't going to help your case in any way. And trying to make up your own solutions is not a good idea (but at least you thought to ask before trying it).
If the intent is to simply be on the latest 2.23 stock software, just run the RUU. You will need to relock the bootloader before RUU if you are s-on. Also, back up any personal data, as user data will be wiped by RUU.
redpoint73 said:
Again, you need to learn and research more before doing anything. This is another perfect example. Factory reset doesn't do anything to the ROM. All it does is wipe the user data partition, and isn't going to help your case in any way. And trying to make up your own solutions is not a good idea (but at least you thought to ask before trying it).
If the intent is to simply be on the latest 2.23 stock software, just run the RUU. You will need to relock the bootloader before RUU if you are s-on. Also, back up any personal data, as user data will be wiped by RUU.
Click to expand...
Click to collapse
I restored stock recovery and got bavk to att rom RUU is giving me usb error dunno why.
ibma said:
I restored stock recovery and got bavk to att rom RUU is giving me usb error dunno why.
Click to expand...
Click to collapse
Not enough info. What exactly does the error say?
S-on or S-off. Did you relock the bootloader?
Any response if you type (using adb):
adb devices
Improper HTC/ADB drivers or using Microsoft USB 3.0 drivers on USB 3 port on Windows 8.x instead of Intel USB drivers would be my first two guess. The ladder of the two issues would be most likely scenario if RUU communicates with device while booted into Android OS but fails to connect when the device is in fastboot/boot loader mode.
-Sent from a payphone...
Ok so I got the samsung galaxy light from metro running 4.4.2 and I decided to root my phone got myself rooted but I used some**** that changdd my phone from metro to tmobile and I guess my pho j e is locked now and its on 4.2.2 and im a iphone guy and dont really understandwhat I did but any help with gettjng my phone back would really be awesome
themilkboy08 said:
Ok so I got the samsung galaxy light from metro running 4.4.2 and I decided to root my phone got myself rooted but I used some**** that changdd my phone from metro to tmobile and I guess my pho j e is locked now and its on 4.2.2 and im a iphone guy and dont really understandwhat I did but any help with gettjng my phone back would really be awesome
Click to expand...
Click to collapse
What?
I have a Galaxy Light, and I'm fairly knowledgeable about the device. But I don't understand gibberish. You need to tell us exactly what you did, and try to speak in English without typos.
Ok
Lol sorry, I rooted my phone, well I put twrp on my phone the flashed it with I guess a flash for tmobile and on jellybean instead of kitkat. I tried to flash the radio but dont think it did anything. And now I reboot my phone and its asking for the sim pin
themilkboy08 said:
Lol sorry, I rooted my phone, well I put twrp on my phone the flashed it with I guess a flash for tmobile and on jellybean instead of kitkat. I tried to flash the radio but dont think it did anything. And now I reboot my phone and its asking for the sim pin
Click to expand...
Click to collapse
Which TWRP did you flash? Did you flash T-Mobile firmware? I need to know EXACTLY what you did.
Ok
I used twrp 2.7.0.0-gardaltetmo.tar. The flashed a supers u update -v 1.94.zip, then I wanted to know how to unroot incase I needed to know and used SGH-t399-stock-MJA.ZIP
themilkboy08 said:
I used twrp 2.7.0.0-gardaltetmo.tar. The flashed a supers u update -v 1.94.zip, then I wanted to know how to unroot incase I needed to know and used SGH-t399-stock-MJA.ZIP
Click to expand...
Click to collapse
Don't use T-Mobiles firmware on your MetroPCS phone.
This is what you need to do.
And for the love of all that is good in this world, next time DO A BACKUP before flashing things. You installed TWRP, which gives you the ability to make a complete backup of your system exactly as it is at that point in time. If you had done a back-up before you screwed up your phone, it would have taken you but a few minutes to unscrew it.
I apologize for being harsh, but it seems to me like you really need to read and research a lot more. I always (well, usually...almost bricked my tablet the other day) read everything I can find about something potentially risky before doing it. Let this be a learning experience for you. Read as much as you can, understand what it is you are actually doing rather than just following some guide, and if you don't understand, just ask. I and most of us here would rather you asked a noobish question instead of going blindly ahead and screwing your phone up. Playing around with root and recovery and flashing without understanding it is like thinking you can perform open heart surgery with a meat cleaver because you've seen every episode of ER, Scrubs, and Grey's Anatomy.
thanks
ok thanks alot btw. just now got the files downloaded but im in twrp and the files are on my pc how could i get them to my phone? and i dont have a sd card either
themilkboy08 said:
ok thanks alot btw. just now got the files downloaded but im in twrp and the files are on my pc how could i get them to my phone? and i dont have a sd card either
Click to expand...
Click to collapse
Hm. I didn't think about that. I think you might need to get an SD card. Go on Amazon or eBay and pick one up. An 8GB one can be had for literally a few bucks, but a 64GB class 10 one for $35 is an awesome thing too.
Ok
Ok, and with the back up download how do I get the in twrp. Should I put it in a zip file or leave it how it is
ok im a retard
Planterz said:
Hm. I didn't think about that. I think you might need to get an SD card. Go on Amazon or eBay and pick one up. An 8GB one can be had for literally a few bucks, but a 64GB class 10 one for $35 is an awesome thing too.
Click to expand...
Click to collapse
ok so i cannot figure out how to do this.
i have the sgh-t399n galaxy light- with no os installed, i have twrp on my phone. and i have a backup a sd card. but when i go to restore in twrp the backup isnt there, and ive tried going threw the file options to move it to where is it suposed to go but no such luck. i thought maybe a terminal command would work but i have no clue what command to use. if you could help one more time that would be awesome
You can always use Samsung Kies 3 to flash your phone back to stock. You need your serial number though, and for some reason it is not printed on the back of the device(at least for me). A call to tech support should get that sorted anyway.
Alternatively, you can do this with Odin to a very similar effect. Search Google for something like "T399NUVUANK3 tar" to get the file you need, my personal backup is corrupt so I can't share.
fddm said:
You can always use Samsung Kies 3 to flash your phone back to stock. You need your serial number though, and for some reason it is not printed on the back of the device(at least for me). A call to tech support should get that sorted anyway.
Alternatively, you can do this with Odin to a very similar effect. Search Google for something like "T399NUVUANK3 tar" to get the file you need, my personal backup is corrupt so I can't share.
Click to expand...
Click to collapse
Ugh... I own a t399n and I'm doing some real development on it. . I've made a stock odex and deodexed rooted zip files for the t399n and haven't posted them yet. . If you're in a bad way still hit me up and I'll have you up and running in no time. Fun things coming for metro users. Who says you have to pay for a high end device to have a high end device? He he he....
Do you have a backup I bicked my samsung galaxy light metropcs then I unbricked it by restoring a backup for the samsung galaxy light that I found online. Search fresh backup for samsung galaxy light sgh t399n.
Planterz said:
Which TWRP did you flash? Did you flash T-Mobile firmware? I need to know EXACTLY what you did.
Click to expand...
Click to collapse
You're quite uppity, aren't you? I had no trouble understanding exactly what he did.
reholli said:
You're quite uppity, aren't you? I had no trouble understanding exactly what he did.
Click to expand...
Click to collapse
Are you seriously giving me crap about a post from over a year ago? Nice contribution to the discussion.:good: I have no idea if the OP ever fixed his phone, but at least I tried to help.
Planterz said:
Are you seriously giving me crap about a post from over a year ago? Nice contribution to the discussion.:good: I have no idea if the OP ever fixed his phone, but at least I tried to help.
Click to expand...
Click to collapse
And the age of the post, with respect to your attitude, is relevant how?
reholli said:
And the age of the post, with respect to your attitude, is relevant how?
Click to expand...
Click to collapse
I just love getting an email alert at 4am because someone quoted me to post absolutely nothing of substance.
It's relevant because IT WAS A YEAR AGO! I don't remember why I was so cranky that day. I did apologize to him for it. Did you notice that I also still did my best to help him? Do you have a solution to his problem? Does he even still have this phone, given that it was a year ago? If you want to fixate on my posts, fixate on the hundreds of times I've been thanked for helping others, especially going above and beyond helping people find the perfect device for them. I'm not here to be grumpy, I'm here to help people, and get help when needed. Why are you here? To pester me? Look, I respect my elders, and you're clearly older, but at the same time don't presume to talk down to me. Try reflecting on yourself and your motive in making a useless post, bumping a thread dead for several months (a severe breach of netiquette), purely to insult another member.
Come to think of it, my email alert wasn't because I was quoted (I have that feature turned off). I got the alert because I'm still subscribed to this thread, having done so in case there were new posts that might enable me to help the OP. I suppose I should unsubscribe, giving the fact that nobody has posted anything of use or substance in 7 months or so.