Does anyone recognise having problems when using a parrot CK3100 with the S740? When I answer an incoming call, the parrot sort of disconnects so I have to get the phone in hand to speak. There is a sign of a tone in the display with a stripe through it. I already updated the parrot-software but no luck. Also checked the compatibility-list of the parrot and unfortunately the S740 isn't in it.
Therefore I'm just wondering if anybody else uses the CK3100 and experienced the same problems but somehow managed to solve them?
Thanx in advance for a reply.
A question : Do you answer the call using the answeringbutton on the carkit or the phone? When you use the phonebutton this is normal.
I also have a lot if issues with the parrot carkit MK6000. After a call it takes 2 minutes before the carkit can be used again (carkit needs to reconnect to the phone and is doing this after 2 minutes) and at every connect it wants to start to download the contacts from the phone. But it never completes. It's about time parrot releases an update.
Solved!
Thanx for your helpful question/answer! The parrot appears to work perfectly when you only use the device on the dashboard to make calls and answer them. With the latest software update 4.18b (which I installed earlier) all works like a charm. Just don't use the S740 to make calls or answer them while it's connected to the parrot.
Related
Hi,
Can anyone point me to some working Bluetooth Stacks for the XDAII that will run on the WM2003SE upgrade please.
My matey has upgraded his XDAII using Sin's merged WM2003SE upgrade (worked great for a Vodafone network!) and installed the MS BT Stack however this only gives partial results when using BT.
He is able to use the headset etc without any problems however when he tries to use the XDAII in his BMW (2005 model 320ci, built-in BT) he is getting intermittant results i.e WM2003SE connects with the car and the headest without a problem however there is a delay before the car picks up the phone when its ringing and on most occasions simply drops the call.
I wanted to know what other stacks are out there that may be worth trying, I have downloaded Toshiba's BT stack and the Widcom stack but I don't know of any others...
Advise much appreciated..
Godz
i too would love to know this.
BuMp
Me too! The widcom stack has a useless headset driver as far as I can read..
I installed http://pdaphonehome.com/forums/showthread.php?s=&threadid=43210 but I am getting out of memory error.. It may be from a XDAIIi??? It also diod a hard reset...
FWIW, to those that have the BMW bluetooth, You will find the first time you make or recieve a call, you have to do it twice. IE dial the number, it will not connect, then redial and it works.
Same when you get a call, answer, it wont connect, then answer a second time and it will connect.
After the first call, it will then work as you would expect.
If you dial directly from the phone it will tranfer to the car kit, but not until the other party actually answers, you wont hear the ringing of the phone.
The big frustration is that although you get sound from the car speakers, I think its only the microphone in the phone that is working. So the other party may have trouble hearing you if your phones in a brief case or your pocket.
Hope that helps
Jon
2003 M3 with BMWBT
Can anyone tell me if the translated chinese rom has these faults?
Hi folks,
Greetings from Italy.
First of all congratulations for this web site and thanks to all people who share their info's with others.
Problem: I use a Qtek 2020 with his original latest ROM 1.75.04ITA, radio 1.14.00, with a Logitech BT headset . This configuration works fine, and I can make/receive phone calls without any problem. I also have installed TT5 with a BT GPS Leadtek device and it works fine, BUT I can't hear TT5 vocal instructions in my BT headset! The voice from TT5 is only available on Qtek speaker.
If I receive a phone call during TT5 usage, the phone call is correctly diversed on my BT headset, on TT5 screen appears an icon showing 'Vocal instructions suspended' (but the graphic instructions are ok) and at the end of phone call the vocal instructions start again.
Note that using wired headset all works perfectly.
How can I hear these vocal instructions into my BT headset?
I know using Nokia 7710 with identical configuration it works fine, why using Qtek isn't?
Pls help me! It's is very important, because I'm an ambluance driver, and this function should be VERY useful for us in our job.
I'm availabe to all modifications: i.e. change ROM, change BT stack (but I'm not able..need instructions..), change WinMobile version... whatever you want if it can be the solution!
The only thing I don't want is to buy another device or a BT adapter.
Thanks,
Valerio
I successfully paired Cingular8525 with Acura 2007 HandsFreeLink. But after it report successfull pairing, I can not use it. It saying phone not found. I use same phone before with PArot system without any problem.
If you go to Acura web site they report 8125 will not support call waiting and data link, but will support basic phone functions. But it does not work for me. Does anyone succesfully paired 8525 with Acura HandsFreeLink? Is 8525 better then 8125 in list of futures supported by acura?
Thanks
I successfully use the 8525 with my Acura TL's Bluetooth. (Previously used an 8125). It works, but occasionally it will drop the Bluetooth connection. This seems to be a known issue with Bluetooth on the 8525.
BTW To get battery level and signal strength meter on the Acura, you need to get the following program:
http://www.jetwaremobile.com
Mike
I have the same problem with my 2005 BMW 545i. Only stays connected when I leave the screen on. If I hybernate it, I lose bluetooth connection. The Jetware program did not seem to help.
sign up for the jetware beta -- might help
my TL also randomly drops the connection as well.
Question, when you answer an incoming call, does the HFL beep twice? Mine does, and the people on the other line can hear the second beep....
Oh well, just live with it I guess....
Bluetooth Acura paudible Tone problem
Yes, I also get dropped more than occasionally in the Acura bluetooth connection. Any fixes? Another Acura problem for me is that when audible tones are created to SEND tone data replies ( " hit 7 to disconnect"), the last tone in teh sudible series sticks and hangs on for 10 seconds or so. The tone message is sent and recieved, so the call actions continue in the background to the tone. Cingular says hardware and send back phone. Any alternative ideas ,or does everyone else have tone work ok?
Bluetooth Acura audible Tone problem
Yes, I also get dropped more than occasionally in the Acura bluetooth connection. Any fixes? Another Acura problem for me is that when audible tones are created to SEND tone data replies ( " hit 7 to disconnect"), the last tone in the audible series sticks and hangs on for 10 seconds or so. The tone message is sent and recieved, so the call actions continue in the background to the tone. Cingular says hardware and send back phone. Any alternative ideas ,or does everyone else have tone work ok?
this actually worked for me, however, the drain on the battery is siginificant, so if you can live with that, I have gone two weeks now without a dropped call....
http://forum.xda-developers.com/showthread.php?t=247520
When I am playing music and I receive a call, after the call ends the bluetooth connection just disconnects. I have to press the play button on little necklace for it to connect again. Anybody have experience with this headset? My last sony headset, DR-BT30Q, works just fine. My current one that I just ordered, the HBH-DS980, plays fine, but it just disconnects after a phone call.
I searched this forum and "HBH-DS980" didn't pull up any matches. I read in the Kaiser forum some ppl installed some jetware software. I would like to get some input with Mogul owners though. Oh yah, I'm running DCD's 2.1 rom based of 3.16.
WOOT. After installing Jetware mobile, I am not getting a drop after a phone call anymore. Now I'm starting to love this headset.
http://www.jetwaremobile.com/index.htm
Do you get phone book on the headset ?
I'm not sure. I have to check back. But today, after resetting my phone, I am still getting the drop after a call. I have to press the play button and it connects right back up, but still annoying.
I do know I get the call list so that I can make a call.
yes, the contacts work.
Wow, I can't get the contacts to work
You have Mogul /Titan as well ? Any special steps you did to get it working ?
Same problem here with the phone call disconnect
Meh, I assumed they work. Earlier my PPC said allow HBH-ds980 to get contact info, or something like that, so I thught it worked. Now It doesn't do anything. I've found this Bluetooth headset works sometimes and doesn't work at other times. Sometimes off a fresh restart on my PPC it will not drop the connect, most other times it will.
Hi everybody.
Recently I've purchased a new HTC Hero. Everything is working fine and this gadget is by far the better mobile+PDA i've used.
OK, now the question.
I've paired the device with my bluetooth car handsfree (Toyota Prius) and although everything works fine (I can call and receive calls and both battery and coverage meter display OK) caller id is not working. So when I receive a call, instead of displaying call number or name in handsfree, it gives and error (something like "Unable to display").
Does anybody have the same problem?
This happens both with official 2.73 upgrade and modaco 2.2 (2.73 based).
Thanks in advance.