I use my phone for internet access a lot via USB tethering. When I download something like a big file and someone calls me or texts me my 3G is cut off for a second and not resumed till the call is over. This is annoying because I can be downloading a large file be halfway through and then my phone rings breaking the download and I have to start all over.
Is there anyway to get around this or do something like enable 3G but go into a mode where you can not revive calls or texts?
settings-call settings- put a check in DDTM Mode
Thanks, is there a way to do this only while I am USB tethering? I dont want it to send calls to voicemail when I have my phone in my pocket and gmail is syncing or something like that.
it will only send your calls to VM when you have an active download. so it might do it when gmail updates BUT gmail updates so quickly that the chances of that occuring are minimal unless you receive many many calls and constantly update your gmail in between.
im not sure exactly what the flag is to send the call to voicemail but i'm thinking its along the line of kb/secs so a speed of x/kb over x/secs and anything less will just ring. i've been idle on the computer tethered and received a call
I'm using Tasker and I need some help with a (few) profile(s). I have a few so I'll just number them.
1. I have a profile that turns WiFi on when I'm at home and it turns off when I leave home. The thing is though, I have terrible service at home, so when I lose service, sometimes Tasker will turn WiFi off. The location is based off of cell towers and/or GPS (both atm).
Is there any way to make it so that WiFi won't turn off until I lose the signal or maybe it won't turn off unless it locates the phone away from home. So even if it doesn't know where I am, it just uses the last known location?
2. Is there any way that Tasker can resend any failed SMS messages? Sometimes when I'm at home or elsewhere, I can't send a message so I'd like Tasker to wait until I have service, and then attempt to resend the message.
3. Can Tasker turn on mobile data if I try to send/receive an MMS message? I don't have unlimited data and I don't leave mobile data on all the time, so is there any way for Tasker to recognize when I'm about to send an MMS message (or receive one) and turn on mobile data?
There were some other things that I wanted Tasker to do, but I can't remember now. If I remember them, I'll post them here.
The ability to turn on data when SMS app is active seems to work for me. I set it to be triggered off my SMS app (Go SMS Pro). When I launch it, it pops up a message telling me that the data is turned on. When I back out of the app, it tells me the data is off.
djeaton said:
The ability to turn on data when SMS app is active seems to work for me. I set it to be triggered off my SMS app (Go SMS Pro). When I launch it, it pops up a message telling me that the data is turned on. When I back out of the app, it tells me the data is off.
Click to expand...
Click to collapse
What if data was on before I entered the SMS app? Will it still turn off or will it just return to the original state?
I think if you just want to return to the original state, you will need to set up a different task to set a variable based on whether the data is on or off. So if data is on, you can set DATAFLAG to 1. Then, when you launch your SMS app, you can check for that when you exit and if the flag is set, you know not to turn it off.
This only happens when on the mobile network, not connected to wi-fi. The HTC email client is connected to my work's Office 365 Exchange server. Whenever I am not connected to a wi-fi network, and using AT&T's data network, I cannot send emails. It constantly gives me errors about sending until I turn off the mobile data network, then turn it back on. Once it comes back on, all the emails that I could not send before all get sent out. This works for a short time, but then once I connect then disconnect from another wi-fi network, the error happens again.
This does not happen with the Gmail client.
Anyone else with this issue, and what, if anything, did you do to fix it?
Anyone else with this issue?
to get smart relay activated properly you must first turn on the mobile data connection on your phone then the mobile data connection on your watch. if the gear s has auto mobile data defaulted, in 60 seconds you will not have to activate it manually.
This method is to get the calls forwarded. Again, to establish the remote connection both phone and watch mobile data connections must be established. If youre connected to wifi the remote connection will not work.
Once call forwarding or remote connection has been established it is not necessary to keep the mobile data connections on either the phone or watch. The remote setup has been worked out through your cellular provider and there isn't a need to keep data on if you don't need them.
This must be done every time to get it working. I'm using both a tmobile bought gear S and note 4. It all works brilliantly.
if i have the phone and watch connected, and i receive a call, and answer it from the watch, will i speak from the phone? its easier to slide from the watch...
Hello I'm having great problems with remote connection. All I get is error message when I try to activate it. all it says is error has occurred please try again. I have note 4 and tmobile. I'm stuck and been researching for 2 days now. Any ideas?
bjh2379 said:
Hello I'm having great problems with remote connection. All I get is error message when I try to activate it. all it says is error has occurred please try again. I have note 4 and tmobile. I'm stuck and been researching for 2 days now. Any ideas?
Click to expand...
Click to collapse
Redo call forwarding setup both on gear manager and watch itself
Mine takes 2-4 tries to connect but after that its flawless
It has to have remote connection first to do the call forwarding
Any ideas?
A good reset/Uninstall the apps always helps me
Yeah tried. Nothing. Now its not recognizing my sim card
i get the same error forwarding calls when moving from BT to mobile connection. although the watch shows me the notifications, it keeps the error.try again.
how do i redo the call forwarding protocol on both devices?
bjh2379 said:
Yeah tried. Nothing. Now its not recognizing my sim card
Click to expand...
Click to collapse
Did ya fix it
BAD ASS NOTE 4 + BAD ASS GEAR S
No Data Plan
hughedee74 said:
to get smart relay activated properly you must first turn on the mobile data connection on your phone then the mobile data connection on your watch. if the gear s has auto mobile data defaulted, in 60 seconds you will not have to activate it manually.
This method is to get the calls forwarded. Again, to establish the remote connection both phone and watch mobile data connections must be established. If youre connected to wifi the remote connection will not work.
Once call forwarding or remote connection has been established it is not necessary to keep the mobile data connections on either the phone or watch. The remote setup has been worked out through your cellular provider and there isn't a need to keep data on if you don't need them.
This must be done every time to get it working. I'm using both a tmobile bought gear S and note 4. It all works brilliantly.
Click to expand...
Click to collapse
I am nor completely clear.....are you saying that each time you know you will be leaving your phone at home, you must manually set up Remote Connection and then turn it off when you reconnect to the watch via bluetooth? I thought is was supposed to be automatic. Also, does this Remote Connection require a data plan to allow it to function? I am in Canada and none of the carriers have a "wearable plan". I just purchased a prepaid nanoSIM from Rogers and signed up for a talk & text plan but no data and I don't want to be paying big $ for data if the watch requires data to function with Remote Connection. HELP!
Rick76 said:
I am nor completely clear.....are you saying that each time you know you will be leaving your phone at home, you must manually set up Remote Connection and then turn it off when you reconnect to the watch via bluetooth? I thought is was supposed to be automatic. Also, does this Remote Connection require a data plan to allow it to function? I am in Canada and none of the carriers have a "wearable plan". I just purchased a prepaid nanoSIM from Rogers and signed up for a talk & text plan but no data and I don't want to be paying big $ for data if the watch requires data to function with Remote Connection. HELP!
Click to expand...
Click to collapse
As far as I'm aware there are actually two separate issues to consider here.
1) If you turn on Call Forwarding in the Gear Manager app on your phone, then calls to your phone (using your phone number) will ring on your watch when not connected through Bluetooth (by being forwarded to your watch #). This is simply call forwarding and all you need is a watch plan that allows voice; no data plan required. You would normally use this when you want to leave the phone at home and receive calls on your watch while you're out, etc. The forwarding isnt automatic, you turn it on or off as required in Gear Manager.
2) If you have a plan that allows data (or have access to a wifi connection) then you will be able to receive texts and all notifications from your phone on your watch when connected remotely. You won't be able to receive calls in real time with only a data plan though, unless you also have a voice plan and forward calls as per #1 above. On the bright side, you will still get the missed call notification if your watch plan allows data, so while you can't answer the call you can always call them back right away. Data plans (or wifi) allow for the remote connection to your phone when out of bluetooth range. This remote connection is possible because without bluetooth, the phone and watch can only sync up through your Samsung account, which is why they need some sort of data connection. Once you've set everything up on your phone and watch, the remote connection will happen autonatically within 60 seconds of losing bluetooth connectivity.
Clearer Now
sefrcoko said:
As far as I'm aware there are actually two separate issues to consider here.
1) If you turn on Call Forwarding in the Gear Manager app on your phone, then calls to your phone (using your phone number) will ring on your watch when not connected through Bluetooth (by being forwarded to your watch #). This is simply call forwarding and all you need is a watch plan that allows voice; no data plan required. You would normally use this when you want to leave the phone at home and receive calls on your watch while you're out, etc. The forwarding isnt automatic, you turn it on or off as required in Gear Manager.
2) If you have a plan that allows data (or have access to a wifi connection) then you will be able to receive texts and all notifications from your phone on your watch when connected remotely. You won't be able to receive calls in real time with only a data plan though, unless you also have a voice plan and forward calls as per #1 above. On the bright side, you will still get the missed call notification if your watch plan allows data, so while you can't answer the call you can always call them back right away. Data plans (or wifi) allow for the remote connection to your phone when out of bluetooth range. This remote connection is possible because without bluetooth, the phone and watch can only sync up through your Samsung account, which is why they need some sort of data connection. Once you've set everything up on your phone and watch, the remote connection will happen autonatically within 60 seconds of losing bluetooth connectivity.
Click to expand...
Click to collapse
Thanks for the clarification. I currently only have the Talk & Text plan so I will have to see how much data is used to push the information. I may have to get a data plan as well.
Rick76 said:
Thanks for the clarification. I currently only have the Talk & Text plan so I will have to see how much data is used to push the information. I may have to get a data plan as well.
Click to expand...
Click to collapse
Happy to help. Also check out my post from the general thread to see my experience with trying to find a good weaeable-like plan here in Canada:
http://forum.xda-developers.com/showthread.php?p=58611081
So to further ask questions about these things..
I just got the watch today and have been searching and trying to find tips on it...
If I am connected via bluetooth.. why does my watch not ring? I thought I could pretty much leave my phone in my pocket all day and do everything through the watch (receive calls and what not). I notice the "messages" app ONLY has messages in there sent from the watch itself. If I get a text message I can view it (not reply..) and it does not show up on the actual watch texts... ideas?
Thanks in advanced.
Hey all,
I just have a question. Lets assume we do have a phone with SIM-A and the Watch with SIM-B. They are connected via bluetooth and for a reason, bluetooth connection get lost. Theoretically, the calls from SIM-A should be diverted to SIM-B. Automatically. Correct?
Because, practically, I am trying this with the Galaxy S7 edge with two sims (SM-G935FD) and it is not working. I got only missed-call notification. The call is not diverted and the phone is still ringing. However, I can do it manually, which of course is not as advertised.
Hey everybody,
Does anyone know how to disable annoying popup messages related to Mobil Data while connected to WIFI? Here's the background; I used to be with Verizon and was one of the treasured unlimited data participants until they recently decided to once again screw their most loyal customers with increases on costs. I left VZW and went to Straight Talk utilizing the 4G LTE Verizon network. Before under VZW, I don't remember my wife's phone showing a message that she could not browse the internet, send email, etc, unless connected to data with the exception of using WIFI. Well since switching over to ST, I've created Tasker Profiles which simulate Juice Defender and turn off mobile data as soon as it is connected to our home WIFI. About every two minutes it popups a messages saying the following:
Title Splash:
Mobile data
Message Content:
Unless you use WI-FI, you will no linger be able to use the Internet, Email or other apps that require a data connection.
Turn off the mobile data connection?
I've attached a screenshot of the message.
How can I disable to popup? I'm sure there's a way to do if someone can point me in the right direction.... Thanks
I should also clarify that the popup returns regardless if you select Okay or Cancel. I even enable Data and still returns.
I found this thread which apparently the issue seems to be related to apps that turn off data or turn it on using automation.
http://forum.xda-developers.com/showthread.php?t=2695808