i downloaded the cab, and tried to subscribe and install but i get error code 206. i tried to call Verizon and they just gave me the run around and eventually told me that i wasn't able to have it on my account. Has anyone gotten this to work for their Verizon Touch Pro???
WindRaker9 said:
i downloaded the cab, and tried to subscribe and install but i get error code 206. i tried to call Verizon and they just gave me the run around and eventually told me that i wasn't able to have it on my account. Has anyone gotten this to work for their Verizon Touch Pro???
Click to expand...
Click to collapse
Yep, runs great on mine. BUT.... You will not get it to work unless you know someone on the inside. A vzw rep from this board had to turn it on for me. Once he did that all was well. Otherwise, you will not get them to do it until they make it official. the cab you downloaded is not for the TP, more than likely the4 omnia or that other Samsung crap.
Visual Voicemail on TP
Can you post your .cab files here for Visual VM on Touch Pro?
Ditto here. & who's the VZW rep who did it? I'd be willing to PayPal him a little if needed. The service looks pretty good.
The real crappy part is that the Touch Diamond that was just released by Verizon does have visual voice mail. Internally both devices are very similar. Minus the fact that the touch pro has more ram and a keyboard. Not Fair!
yeah this is really stupid since the diamond has it and there is no question they are the same phone software wise so just give us the ability to add visual voicemail already.
Are there any updates on this? Is there anyone on the board with VZW who can help?
Yes please post the Vis Voice for Verizon Touch PRO here
Pretty please with sugar on-top
Remember to Install .net framework 3.5 with it as well...Like everyone said, you need someone on the inside with Verizon to activate the service for you.
.net Framework cab can be found here: http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
I used this cab on my i910 omnia as well as i730, I am going to try it on my saga now, should work though I would think...
jxa4508 said:
Remember to Install .net framework 3.5 with it as well...Like everyone said, you need someone on the inside with Verizon to activate the service for you.
.net Framework cab can be found here: http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
I used this cab on my i910 omnia as well as i730, I am going to try it on my saga now, should work though I would think...
Click to expand...
Click to collapse
Although the cab installs no problem; getting it activated on the account is where the issue is...
hmm...so it installed ok, but when tried on the Saga, I get the error of "The device number could not be initialized. If you are in flight mode, please turn off flight mode and try again." My signal is def on...any idea's? I still have the omnia here if I should pull some files off of it...
It works fine for me & I didn't have to call anyone at Verizon to get it to work. After the install I was prompted to sign up for enhanced VM for 2.99 extra a month. From there it works well except the sound only comes out the speaker and not the earpiece, regardless of what I've selected in settings.
8notime said:
It works fine for me & I didn't have to call anyone at Verizon to get it to work. After the install I was prompted to sign up for enhanced VM for 2.99 extra a month. From there it works well except the sound only comes out the speaker and not the earpiece, regardless of what I've selected in settings.
Click to expand...
Click to collapse
I actually called and requested the 2.99 service after downloading/ installing Verizon VVM app, they told me I couldn't get the service. As I was reading this thread, I came across this post, checked my VVVM app and there were my voice mails! Just waiting for me!
Can't wait for him to call me back Friday (like he promised) so I can tell him all about the miss information I get from the Verizon folks.
Side note, I see the MR1 2.0 is available from PCD
http://pcdphones.com/phone_downloads.aspx?bid=110&cid=1&mid=328&carrier=Verizon%20Wireless
I am sure this is the wrong place to post, but I don't post much!!
works fine on my touch pro...
I signed up for it on My Verizon first.
wish I could map it to cVoicemail....but that cHome stuff is beyond me for some reason.
bah.
Related
Hello all. I'm not sure if this has been posted here, but thought I'd post again. I take no credit for this fix. Voice Command works well on my Mogul, running dcd 1.67, but incoming calls were not being announced.
This fixed my problem:
http://forum.xda-developers.com/showpost.php?p=1548114&postcount=5
yeah, I found this before but forgot where it was. Thanks for pointing it out again.
Too bad this still doesn't fix the verification prompt issues
Hi,
Im having a hard time opening the vociecommand file on my desktop. How do I install the file to my mogul (Sprint)
emillz615 said:
Hi,
Im having a hard time opening the vociecommand file on my desktop. How do I install the file to my mogul (Sprint)
Click to expand...
Click to collapse
UNZIP IT! (winzip,winrar,windows xp uncompress utility)
Disable Voice Command before you attempt this
Overwrite your existing (on your mogul) files from the zip. Make sure you can see hidden/system files
\Windows
VoiceCommand_PPC.cpl
\Program Files\Voice Command\
VoiceCmdRes_PPC.dll
VoiceCommandWMP.dll
voicecmd.exe
Enable voice command.
I need voice announce to work on the T-Mobile Dash 3G
OK. Hi. My name is Chris. I am totally blind. NO seriously I mean it. I have a program on the phone that reads the screen to me called Mobile speak, from www.codefactory.es. Any who, irrelavent as that is, LOL! Basically, here is what I found from talking to HTC. I won't squeel on the lady who told me this, as she said she's not supposed to tell me this, however she felt real bad due to my unique situation with blindness. Basically, the eal is: No matter what phone you use, if it has WM 6.1, this MSVC regardless what hack you use, isn't gonna work with announcing calls. There apparently, was a hotfix that MS did not include in WM 6.1 that was meant to be in there but wasn't. Without this hotfix, htc says hack or not, rom update or not, older/newer version of VC, isn't gonna fix things. They wanna give us the update, but they can't even make it themselves till A, that hotfix is emplemented, or B, W6.5 is released. I can't use the cooked 6.5's as they don't work well with Mobile Speak. Plus the start menu doesn't work period with MSpeak. I got the zip file up here, quit msv, replaced files, restarted, no go no show. still no announcing of calls. She reads everything else fine, but not that. So I present you all with a couple questions. Can I please get the Dash 6.0 version of Windows Mobile from someone with a US Dash 6.0, and put it on here? Yeah 3G won't work any more, and some other things won't either, likely, however, if you all think in theory it would work, I'd be willing to try it. I already unlocked with spl my phone, so, that's all good. If this doesn't work, can you all get me a program as an alternative to VC that will audibly announce calls? I need this as due to my blindness, I can't read the caller ID with MObile speak while phone is ringing as it's drowned out by ring tone. if I turn ringer down, that works except, caller ID only is spoken by MS once, so if I'm outta the room, well, yeah... good luck. you're officially screwed. This unlike you all is not a wanted feature, due to my disability, it's a need, so please! can someone help me. Even if we have to really go a pain in the effin arse's way really round about? I've been reading you all's threads here both related and unrelated to this. Yall're awesome, so surely I say: someone up here's gotta! have some idea. I can't wait for 6.5, then longer for Code Factory to do their magic to get Mobile speak working. I'm sorry, that's just not satisfactory.
Please E-mail me with any help.
[email protected]
Voice Command Call Announce issue
I tried copying the files from the Zip, could only get 3 of the 4 into my phone, made it freeze, had to uninstall and reinstall VC. Still cannot get incoming calls to announce on a newly upgrade ROM.
I have Verizion Wireless. I just installed BootLoader 2.40, Titan_Radio_ROM_3.42.30, dcd_titan_kitchen_3.2.2, and dcd Verizon Carrier 20080706.cab. I don't know if I was supposed to, but also did *228 option 1 to program my phone and *228 option 2 for updating roaming cababilities. The internet works fine on the phone and I can recieve text messages without any problems, but I can't make or recieve phone calls. Thanks for your help and time!!
Gonna go out on a limb here and guess that it's saying you're not authenticated?
You need to call Verizon and have them authenticate you. It's normal when you go from stock to a GPS radio.
I go with gc14 on this one. Just had the same thing happen to me a while ago after just doing a hard reset...no update ROM, radio, or anything. Just hard reset and no more authentication...what a pain. lol
Oh, yeah. I listened again and that's what she said. OK, I'll call them tomorrow.
I even got my TomTom GPS software working. I didn't need to use any 3rd party software to get it working either like it said on the forums.
I even got Opera Java working, but I got some kind of message when I was installing the Java software saying that Sprint couldn't guarantee something. I don't remember the exact message, but I don't have Sprint, I have Verizon. Did I install the wrong ROM or something? Am I going to have problems now? Thanks!
How come everywhere I go now it thinks my phone is a Sprint PPC-6800, when it's really a Verizion XV-6800? I just went to Yahoo.com and it's calling my phone a Sprint PPC-6800. Is this going to cause any problems with my Verizon account? Thanks..
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Apota said:
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Click to expand...
Click to collapse
I don't use text messages, so I can't be sure, but I think there are other links about text messages. You likely need to install a program. Try searching and let us know if you find it.
As far as the flash with v5 of camera, I think you are out of luck. My memory is there is no flash. There is a way of installing the old camera back without doing a hard reset. I just don't remember how to do it. You can try searching for this too. Again let us know if you find it. Hopefully someone else will be able to help more.
Yes, I think I found the solution, I did what it said and now it says SMS/MMS, but I haven't tested it yet. So, I'll see. I just need to know about the camera now. That's the only issue..
http://forum.xda-developers.com/showpost.php?p=2220029&postcount=6
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
don't down grade just reflash a cooked rom with the version 4.05 something camera has a flash
Reflashing ver 4.05 when you'd installed ver 5 IS downgrading in my book
Big Dawg 23 said:
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
Click to expand...
Click to collapse
1st - The camera you used is version 5, to have the flash again you will need to re-cook a ROM with version 4.X....
2nd - For the latest MMS, use GC14's 5.0.31.25 cab of Arcsoft. The incoming MMS issue where the phone number is shown instead of your contact has been fixed. Find that cab here MMS 5.0.31.25
Yes, I've already read all of those links many times. I saw the information about the OEMizer. It said it was OPTIONAL. It doesn't really tell me what it is, or what it's for. Since this was the first time I ever installed a new bootloader, radio, rom and VZW cab, and didn't really know what I was doing, I didn't want to make it too complicated and overwelm myself. I still don't know what the OEMizer is, but I guess I can run it and see what happens. I need to make a new ROM anyways for the camera. I still have a few questions.
- What is the OEMizer for and is there someplace that explains it's settings?
- I can't find OEMizer in the Kitchen's Tool directory or any of the other Kitchen's directories. Where is it at? I did a search on the internet and couldn't find it.
- What is PagePool Changer? Is that something I need to use?
- Now I have the latest bootloader and radio installed in my phone already, can I make a new rom via the kitchen and just install it without having to worry about anything else?
- I guess I will still need to run the VZW cab file after I install a new ROM, but that should be it, right? Just those two things?
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
- WM6.1 is grouping all my text messages together, which is great and I love it, but the only problem is sometimes I want to deleate one text message and it seems like you can't and you have to delete all the text messages from the same person. Is that true, or is there a way around it?
Thanks everybody again for all your help!!!
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
Click to expand...
Click to collapse
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
To use this, uninstall any version of Arcsoft you may have installed currently. Once it is fully uninstalled, check your registry and make sure there is nothing for Arcsoft under "HKLM\Software." Next, install this cab. Once it is done installing, check your registry under "HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader" and make sure X-VzW-MDN is set correctly with your phone number.
gc14 said:
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
Click to expand...
Click to collapse
Yeah that was just for testing purposes originally...to make sure the previous one was completely uninstalled, then to make sure the new one installed correctly. It's been verified working though for a while.
Can someone post the vzappzone cab from the TP? I want to check out the visual voicemail using the XV6800...hopefully.
THANKS!
There is no CAB in memory... it was a download from Verizon, not sure how extract it...
I dont see a Visual Voicemail app anywhere on VZAPPZONE either... I searched.
As far as I know, Visual Voicemail is only available on the blackberry storm and costs $3/mo.
Here I found this:
http://products.vzw.com/index.aspx?id=fnd_toolsapps_detail&appId=3109611
Apparently it will be pre-install on the Samsung Omnia (WM6.1 device) so we may be in luck soon!!
ramborami said:
There is no CAB in memory... it was a download from Verizon, not sure how extract it...
I dont see a Visual Voicemail app anywhere on VZAPPZONE either... I searched.
As far as I know, Visual Voicemail is only available on the blackberry storm and costs $3/mo.
Click to expand...
Click to collapse
I think that when you download the cab, you can save to the storage card. If you have the time to try that and then attach here that will be great.
Thanks!
froader said:
I think that when you download the cab, you can save to the storage card. If you have the time to try that and then attach here that will be great.
Thanks!
Click to expand...
Click to collapse
FWIW, I asked about visual voice mail when I bought my TP (through the telesales store), because I noticed it comes pre-installed on the Saga, too. The Verizon rep told me that it's not compatible with the TP.
But, don't let that slow you down -- Verizon reps say LOTS of things....
Kalnel said:
FWIW, I asked about visual voice mail when I bought my TP (through the telesales store), because I noticed it comes pre-installed on the Saga, too. The Verizon rep told me that it's not compatible with the TP.
But, don't let that slow you down -- Verizon reps say LOTS of things....
Click to expand...
Click to collapse
I am seriously getting sooo sick of Verizon's Bull Sh**. First they cripple the Touch Pro and charge more than other uncrippled versions. Now the rep says no visual voicemail even though the TP support page shows the feature and the visual voicemail page shows the TP as a supported device. One of these days it would be nice to get what you are actually told you are buying!
froader said:
I am seriously getting sooo sick of Verizon's Bull Sh**. First they cripple the Touch Pro and charge more than other uncrippled versions. Now the rep says no visual voicemail even though the TP support page shows the feature and the visual voicemail page shows the TP as a supported device. One of these days it would be nice to get what you are actually told you are buying!
Click to expand...
Click to collapse
I got fed up with it too. I orriginally bought the verizon TP. ended up buying the sprint version, returning the vzw one, and going through the lengthy, hacky, process of making the sprint TP work on verzon's network. I'm very happy now.
What route did you go to buy the Sprint Touch Pro and how much?
Any problems yet?
Thanks!
I found a registry key identifying the Titan as XV6800 for IE browsing. Can someone with a Touch Pro pass on the info in this reg key for me.
HKLM\Security\Internet Explorer\User Agent-Custom.
Thanks!
froader said:
I found a registry key identifying the Titan as XV6800 for IE browsing. Can someone with a Touch Pro pass on the info in this reg key for me.
HKLM\Security\Internet Explorer\User Agent-Custom.
Thanks!
Click to expand...
Click to collapse
Alright, I just got it. I changed the above reg key to XV6850 pointed to ota.getvzappzone.com and got the download. On to Visual Voicemail.
Here is the Cab.
I just checked, VZAppZone is now on mobile.vzwapp.com
froader said:
Alright, I just got it. I changed the above reg key to XV6850 pointed to ota.getvzappzone.com and got the download. On to Visual Voicemail.
Here is the Cab.
Click to expand...
Click to collapse
WOW.... so you think if you change that reg key to "Omnia" or "SCH-i910" then VZAPPZONE would let you download Visual VM????
I uninstalled piece of crap vzappzone because it kept turning ON my internet connection at random times for no apparent reason.
Original Registry Key:
HKLM\Security\Internet Explorer\User Agent
"480x640; XV6850; Windows Mobile 6.1 Professional;" (without the quotes)
Uninstalled vzappzone, changed reg key to: "240x400; SCH-i910; Windows Mobile 6.1 Professional;"
reinstalled vzappzone, still no ability to find visual voicemail...
Here is the visual voicemail cab I have been running on my i910 as well as i730, going to try it on my saga next, remember to install .net framwork 3.5 with it!
Link to framework: http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
VVM Cab - Attached
I downloaded the cab and installed it. When running through the startup sequence it failed and said to call customer care. They obviously wont help with this. Do I also need to change update the reg key so that VZ on connection thinks its a touch?
Ok, Here is Arcsoft MMS 5.0.69.44 for sprint.
I added the qvga DLL and emotions, and added the sprint settings.
Let me know how it works. I installed it on the Dream rom that didn't have any MMS on it. So I cant help you on removing sprint picture mail.
Just did a Hard reset, installed and sent a MMS, and Successfully received it. Haven't actually tested it on a QVGA phone yet. Should work on both vga and qvga phones now.
Update! Ok, I changed the settings... I Never meant to put in the 512k limit of receiving. So the default is 512k sending limit, and 10 meg d/l limit. I also removed the limit for editing the server setting. Now you can edit the sprint server, and change the limit there in the app without having to do any regedits. I made the default choices 512k (For compatibility with other carriers), 1 meg, and 5 meg.
Update 2. oops. Forgot to remove stuff from the xml. It is fixed now.
Download Here!
It installed great on my kaiser/tilt. The only issue is that I cannot send text messages or picture mail. I believe this is because the server is set to Sprint but I cannot change it... Anyone have any ideas? Is there a newer version for ATT? Thanks again fo rhte cab though..
Hyden121 said:
It installed great on my kaiser/tilt. The only issue is that I cannot send text messages or picture mail. I believe this is because the server is set to Sprint but I cannot change it... Anyone have any ideas? Is there a newer version for ATT? Thanks again fo rhte cab though..
Click to expand...
Click to collapse
Yes, it is setup for sprint. If you want to edit the server settings, then you will need to open your registry editor, and set "EnableServerEdit"=1 in HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI
Thanks for the awesome reply. I will give that a shot.
For AT&T use:
Server Name : AT&TMMS
Gateway: wireless.cingular.com
Server Address:http://mmsc.cingular.com
Use Medianet
I was able to obtain this info is anyone else needs it to use this cab with AT&T. Thanks again for the help.
Good find works great with my Touch Pro
So this should work on a Sprint Touch (Vogue)?
I might try it on my old phone and let you know.
Just as I suspected....
Does NOT work with Sprint Mogul... Damn!!!!!
This isn't working on my Sprint Touch Pro at all... Is there something I'm missing or overlooking?
I've even installed it after a hard reset with no PictureMail installed.
This is a real bummer... The ONLY feature that I like that i really want (that the working 3.x version doesn't have) is the auto fill as you type field for the TO: field...
Later,
Matt
jaminmc said:
Ok, Here is Arcsoft MMS 5.0.69.44 for sprint.
I added the qvga DLL and emotions, and added the sprint settings.
Let me know how it works. I installed it on the Dream rom that didn't have any MMS on it. So I cant help you on removing sprint picture mail.
Just did a Hard reset, installed and sent a MMS, and Successfully recieved it. Haven't actually tested it on a QVGA phone yet. Should work on both vga and qvga phones now.
Download
Click to expand...
Click to collapse
I LOVE YOU!!!! thats amazing it works without flaw on my Sprint TP with Juggalo's latest rom installed to system not storage everything works WOW. Thanks so much I'm so excited
how did you get this to work? I as well hard reseted to jugs rom and installed and have been unable to download the message, even checked on the message 'download'
thanks,
Brian
I'm adding my thanks to the OP. It's working perfectly on my Touch Pro (running Juggalo_X's 0.08B ROM). Thanks again!!!
Anyone get this working on a Mogul?
Will this work on a stock Sprint rom on a Touch Pro? Everyone here that has it working properly seems to be running a custom rom.
JFitts75 said:
Will this work on a stock Sprint rom on a Touch Pro? Everyone here that has it working properly seems to be running a custom rom.
Click to expand...
Click to collapse
Good point Fitts; I wonder what the change is that is allowing it to work properly?
Later,
Matt!
KillerQ said:
Good point Fitts; I wonder what the change is that is allowing it to work properly?
Later,
Matt!
Click to expand...
Click to collapse
As long as Sprint Picture mail is not installed you should be all et
This appears to receive the message, but I can't view it at all.
All I get is the "Pics/Video Detail" screen, showing who sent the message, the subject, it's size, sent time, etc.
Anyone know how to delete the picture mail app on the touch pro?
buddy lee said:
Anyone know how to delete the picture mail app on the touch pro?
Click to expand...
Click to collapse
Install the update cab and then uninstall it or install it again it will uninstall it first then quit
Massive thanks to jerpelea (wouldn't have gotten anywhere close without him).
I'm back! This new version is based on the fantastic Insomnia NIKI Kitchen, using WM6.5 Build 21500 and OEM Iolite/mishmash. As I made this version for my personal use, it is FULL of applications - if you don't like applications installed from the start, don't download it!
Warning: This ROM is for testing only and has been prepared by a complete cooking noob (me). I cannot guarantee any results for you or your phone and this may end up screwing things up COMPLETELY . Install at your own risk.
Having said that, it works very well on my NEON200 (Touch Dual 850), much better than any other ROM I have tried and even better than the old 6.1 version.
Make sure you have installed the Neon Hardspl (thanks Olipro) before you even remotely consider installing this.
Known Issues:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
- The camera hardware button does not work
- The camera autofocus doesn't work properly (messed up the some of the files I copied I think) so it takes a few seconds to shoot.
- Hardware keyboard doesn't work properly. It thinks that it is a 16key version.
Anyway, give it a go if you are game and let me know how it goes. It is a hundred times more finger friendly than the WM6.1 ROMs (which is the whole point of the touch phones).
I only do this in my *very* spare time, so I'm sorry in advance if I don't update often. I can say that I am very happy with the ROM as it is (never use the keyboard or camera), so it may be quite while before I update.
Download the new WM6.5 ROM here.
Old version (WM6.1 Build 21109) can be downloaded here if you want it for some reason.
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
ajb303 said:
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
Click to expand...
Click to collapse
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
maximus007 said:
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
Click to expand...
Click to collapse
I was just about to edit my post Keyboard does not work at any time. Also when recieving a voicemail, i tap and trys to connect. But says that phone call cannot be made at this time.
I've had no issues with voicemail...
Have you tried installing the latest Ezinput from the first post? Do you have 20-key device?
Perhapsthe Voicemailis something i need to set up with T-mobile.Yep, got the touch keyboard working with the install No keypad though.
Edit: Yes, camera button does not work.
I'm gonna load it up now and give it a shot.
I can't find the SIP task in task manager to kill it before installing the .cab.
Also can't get online because it is configured for Telestra (I imagine I can fix that easily). The "Setup Connection" app in settings closes immediately. That is how I used to setup my internet/phone provider stuffs.
Edits.
Ok...oddly enough after I updated my internet settings the 'task manager' and a few other apps showed up. That allowed me to kill the SIP and load the keyboard.
Overall this ROM is fast! Very happy with it so far. Can't wait till it is finished.
PS - I can't use my hardware keyboard either. Even with the SIP update. On screen works perfect.
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
I haven't found a packaged default ROM. You might wanna see if he releases one once he gets this build worked out. I would love to get a copy of your default rom before you upgrade it. I think I lost mine 2 laptops ago. Once you load the HardSPL you can go back, however you need the default ROM to do so. There isn't a backup / restore utility as far as I know.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
wait! haha, before you do can you dump your stock rom? That would be very useful
I'm new to this site. How do I get my ROM backup?
mafirst said:
I'm new to this site. How do I get my ROM backup?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2254400&postcount=7
Let me know if you need help with this.
Voice Mail (T-Mobile)
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
big papa rich said:
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
Click to expand...
Click to collapse
Interesting, I didn't know that. I thought it was just an issue I had to call t-mobile about. Thanks
SMS
I have een having issues with SMS. When I try to send a text, I get an error message saying that my message can not be sent, that I need to subscribe to the service. I flashed back to Seths V2 rom and every thing worked fine. Any ideas?
BTW, don't know if any one needs it, but here is a cab that works great for reconfiguring internet stuff for T-Mobile or AT&T
I Just found this link. Says it is for the Neon 200 US, but my device still says 300. Any how, looks exactly like the Ship Rom as I remember it.
http://forum.xda-developers.com/showthread.php?t=395384
maximus007 said:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
Click to expand...
Click to collapse
You can change it by editing:
1) Modelname.txt in OEM/OperatorPkg
2) nbhgen.txt in Tools/Htools
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
maximus007 said:
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
Click to expand...
Click to collapse
Change the name in modelname.txt in oem/operatorpkg
Also change mixupdate_oemversion_100.provxml in same folder.
os.nb.payload content will get overwritten when the ROM is built.
Thanks for mixupdate_oemversion_100.provxml - that has the version info in it (also edited easily via registry). It was missing from my kitchen.
modelname.txt simply has "Touch Dual" (which is OK) in it. That file doesn't let me change NIKI100 to NEON200.
If you check my .nbh in a hex editor it displays "NEON200", yet upon flashing it still displays the device as NIKI100...