Related
Anyone "in the know" on what is going on with Microsoft Voice Command?
For those not up to date heres the brief bio:
Microsoft released a rocking WM program that offers true voice recognition on pocketPCs and smartphones. If it didn't come with your carrier's build, it's a $40 upgrade, and well worth it. The latest version is 1.6. Unfortunately, it's been fraught with little issues, mostly related to Bluetooth headset compatibility, but most people still find it indispensable in spite of these challenges. I'm one of those people. The dial by number, and recognition of any name in the address book is invaluable to me, and a "must have" app for my 6800, no matter how badly it works.
The program is at version 1.6, and hasn't been updated in 2 years now.
What's the skinny?
jtg
I agree. I have had the same problems and have searched the net for any info about an update. Like you, I have not been able to find anything about a projected release of a new version. I guess that is just the microsoft way...only 2 years..
I heard a rumor that it was goint to be built into the next version of Windows mobile, but I hope that's not true.
If that happens, hoppefully it will be DCD to the rescue with a port for use all!!!
The real deal:
Ok, to those who haven't been following:
Microsoft DID update the VC software, but it was never released. It seems the Windows Mobile version went to the back burner since they made a deal with Ford Motors to start including the VC technology in the new Ford in-dash stereo systems (que up your mp3's, make calls via your bt phone, etc).
However, there was a test rom floating around for another WM device that had a greatly improved new VC version, which fixed 99% of the problems everyone was having.
This version was extracted and made available as an OEM to load into a kitchen to build into your ROMs.
There is NO .cab installation that I've seen for this version, so you're stuck with either cooking it in, or just replacing the files (there's a zip floating around here somewhere of the files u need to replace to make it the new version, but I don't recall where I saw it).
The OEM can be found in the excellent new PPCGeeks kitchen (ppckitchen.org), which incidentally supported Titan roms now.
For you DCD fans, it seems he hasn't made his rom compatible with the new kitchen GUI, but its relatively simple to make it a basekit. If enough of you push dcd, he might consider doing it... otherwise, you can always copy the OEM directory into DCD's kitchen OEMs.
Try Dutty's Voice Commander
This works for me, it is the best of both versions I have seen of the voice software. There are a couple versions out there, this is the most recent I have found. It is a cab.
I've got VC almost completely working. I cooked it into the DCD ROM. One reg key needs to be changed to get the button on your headset to work. The part I don't have working is the prompt and confirmation comming to the headset. The prompt and confirmation come out of the phone. It takes commands fine through the headset, just no audio until the call is started. Anyone know how to fix that? I'm using a Jawbone.
Dishe said:
Ok, to those who haven't been following:
Microsoft DID update the VC software, but it was never released. It seems the Windows Mobile version went to the back burner since they made a deal with Ford Motors to start including the VC technology in the new Ford in-dash stereo systems (que up your mp3's, make calls via your bt phone, etc).
However, there was a test rom floating around for another WM device that had a greatly improved new VC version, which fixed 99% of the problems everyone was having.
This version was extracted and made available as an OEM to load into a kitchen to build into your ROMs.
There is NO .cab installation that I've seen for this version, so you're stuck with either cooking it in, or just replacing the files (there's a zip floating around here somewhere of the files u need to replace to make it the new version, but I don't recall where I saw it).
The OEM can be found in the excellent new PPCGeeks kitchen (ppckitchen.org), which incidentally supported Titan roms now.
For you DCD fans, it seems he hasn't made his rom compatible with the new kitchen GUI, but its relatively simple to make it a basekit. If enough of you push dcd, he might consider doing it... otherwise, you can always copy the OEM directory into DCD's kitchen OEMs.
Click to expand...
Click to collapse
i prefer the functionality of dcd's kitchen over ppcgeeks.... except for the splash screen thing... but it's all opinion
serfboreds said:
This works for me, it is the best of both versions I have seen of the voice software. There are a couple versions out there, this is the most recent I have found. It is a cab.
Click to expand...
Click to collapse
Does this version require you to set tags for contacts?
Thanks
roninld said:
Does this version require you to set tags for contacts?
Click to expand...
Click to collapse
No, it doesn't require you to set tags, but provides that as an option. The tags are useful for frequently called numbers as they should reduce errors somewhat.
This version also works properly through my bluetooth headset including confirmations.
-dwdoc
ok, here is what I did to get it working with DCD:
1. Take the voice command folders from ppckitchen and put them in the OEM folder. There are two folders for the newest version
2. Cook your rom
3. Change the button assignment to VC if you want (settings -> buttons)
4. HKLM\Software\OEM\VoiceCommand change "path" to "\windows\voicecmd.exe"
5. HKLM\Software\Microsoft\Bluetooth\AudioGateway change "BTAGExtModule" to "vcbthag.dll"
Hope that helps you guys!
P.S. On the handset the initial voice prompt beep doesn't work.(the first time you press the button)NOT USING HEADSET
When you dial by the headset the little dial tones come out the handset.
This also lets the phone send ring tones to your headset when it is ringing.
Dishe--thanks for the tip, I googled and found a cab--I have voice command 1.6.17913, and it is a significant improvement over the one I purchased. I can now use my BT headset like I did with my old 6700!! Can anyone confirm this is the most recent build?
jtg
1.9.19209 is available as an OEM in the PPCGeeks Kitchen, but I don't know if there is a CAB of it anywhere.
JimSmith94 said:
1.9.19209 is available as an OEM in the PPCGeeks Kitchen, but I don't know if there is a CAB of it anywhere.
Click to expand...
Click to collapse
I just went through the Kitchen process described above and I get a version number of 1.6.19209. Perhaps just a typo?
whbell said:
I just went through the Kitchen process described above and I get a version number of 1.6.19209. Perhaps just a typo?
Click to expand...
Click to collapse
The Tip in option.xml for this version says, "Microsoft Voice Command - Latest version from kaiser". No2Chem shows as the author, so maybe he will chime in.
JimSmith94 said:
The Tip in option.xml for this version says, "Microsoft Voice Command - Latest version from kaiser". No2Chem shows as the author, so maybe he will chime in.
Click to expand...
Click to collapse
This is what I see also.
<?xml version="1.0" encoding="UTF-16" standalone="yes"?>
<Items>
<Item name="Microsoft Voice Command" group="Voice Control" checked="True">
<Tip>Microsoft Voice Command - Latest version from kaiser</Tip>
<Guid type="p">410788f1-acd5-457b-b9ea-df86ac7f990e</Guid>
<OEMDate>3/30/2008</OEMDate>
<AppVersion>1.6.19209</AppVersion>
<AppAuthorURL>http://www.microsoft.com/windowsmobile/</AppAuthorURL>
<ButtonType>GroupRadioNone</ButtonType>
<OEMAuthor>No2Chem</OEMAuthor>
<Require>93f31b6d-078b-4dae-a335-8ea8c3b22c97</Require>
</Item>
</Items>
I believe it was just a typo and he meant a newer build of 1.6. I have the 1.6.19209 installed from the kitchen and can not seem to get voice dialing to work when I dial by name though. It recognizes the command and will ask me if I want to dial work, home, cell, etc. However, when I confirm it never actually dials. It will work fine if I tell it to just dial a number though. Anyone else experiencing this and know of a fix?
djlenoir said:
I believe it was just a typo and he meant a newer build of 1.6. I have the 1.6.19209 installed from the kitchen and can not seem to get voice dialing to work when I dial by name though. It recognizes the command and will ask me if I want to dial work, home, cell, etc. However, when I confirm it never actually dials. It will work fine if I tell it to just dial a number though. Anyone else experiencing this and know of a fix?
Click to expand...
Click to collapse
There are 3 olders in the PPCKitchen. Voice Command 1.6 (which is the 1.6.17 version), VoiceCommand (version 1.6.19), and VoiceCommand_Lang_0409 (supports files for 1.6.19). I threw the VoiceCommand_Lang_0409 into the SYS folder in DCD kitchen, and VoiceCommand into the OEM. Cooked with no problems.
Have no issues with VC not dialing a contact.
roninld said:
There are 3 olders in the PPCKitchen. Voice Command 1.6 (which is the 1.6.17 version), VoiceCommand (version 1.6.19), and VoiceCommand_Lang_0409 (supports files for 1.6.19). I threw the VoiceCommand_Lang_0409 into the SYS folder in DCD kitchen, and VoiceCommand into the OEM. Cooked with no problems.
Have no issues with VC not dialing a contact.
Click to expand...
Click to collapse
Sorry, which kitchen? I can't find those files...
88fingerslukee said:
Sorry, which kitchen? I can't find those files...
Click to expand...
Click to collapse
After you install the ppcgeeks buildos and update, there is a kitchens folder. In there, PPCGeeks_OEM.rar has these folders.
This is a beta for a new rom taxist and i are working on. please give suggestions and/or comments about the rom
SPL1.2 - http://www.megaupload.com/?d=H4S1NCOT
SPL3.5 - http://www.megaupload.com/?d=A5L0NEWX
UPDATE 10/06/08:
ok this is the last version, as of right now, with this build i am putting it on the back burner until i have more time to fix the stupid audio manager problem. the first link is spl 3.5 the rom and the second link is spl 1.2 third link is the addons (to much to list) but i will say it does have the voice commander 2.5 pulled from diamond and i did test it and it seemed to work. so here you go enjoy and final of my new rom will be out in about two weeks
spl 3.5
http://www.eurotelefon.eu/athena/taxist ver10 spl 3.5.zip
spl 1.2
http://www.eurotelefon.eu/athena/taxist ver10 spl 1.2.zip
addons
http://www.eurotelefon.eu/athena/new addons.zip
Let´s try
It´s a clean ROM, right?
A very clean and quick room not even have File Manager... Default is 192dpi, luckly I managed to find out the total commander!
siukeung said:
A very clean and quick room not even have File Manager... Default is 192dpi, luckly I managed to find out the total commander!
Click to expand...
Click to collapse
I like it WITHOUT the file manager. Good call. The standard file manager is a junk that never get used anyway. I use Resco File Explorere 2008, which allows you to scroll with fingers (like HTC TouchFlo with sound)..
I'm going to try this out for sure, and I think this could be IT.
eaglesteve said:
I like it WITHOUT the file manager. Good call. The standard file manager is a junk that never get used anyway. I use Resco File Explorere 2008, which allows you to scroll with fingers (like HTC TouchFlo with sound)..
I'm going to try this out for sure, and I think this could be IT.
Click to expand...
Click to collapse
Agree! I m so worry what I'm going to do if I can't find Total Commander ><! So far so good, Wifi working, Opera working, TCPMP working...with sound..
Too bad that Touchflo 3D not working...=,=
siukeung said:
Agree! I m so worry what I'm going to do if I can't find Total Commander ><! So far so good, Wifi working, Opera working, TCPMP working...with sound..
Too bad that Touchflo 3D not working...=,=
Click to expand...
Click to collapse
Personally I don't like Touchflo 3D. I only want the touchflo. Is that working?
Ather mirror...
Could some provide other mirror? I am not able to upload from megaupload
And I am willing to try SPL 1.2 version ASAP!
Many thanks Irus.
Great Job, Irus
Thanks Irus, is nice to see we are progressing, with your support of course. Just a question, I suppose is Ozvga included? Should be possible to have RealVga?
My question is because I think most of us use on 128 dpi.
http://asapload.com/117411 mirrors for the 3.5spl
Irus use asapload in future it makes life simpler for everyone..
has the problem with blank contacts been overcome?
is it possible to change the current boot logo (smart mobility test only not for sale) to the default htc?
When I press the button of my bluetooth does not do anything… does not abre voice to me to dialer nor nothing….
beginner said:
Thanks Irus, is nice to see we are progressing, with your support of course. Just a question, I suppose is Ozvga included? Should be possible to have RealVga?
My question is because I think most of us use on 128 dpi.
Click to expand...
Click to collapse
RealVga is installed, not OzVga.....128 is included and works fine
retroqwe said:
has the problem with blank contacts been overcome?
Click to expand...
Click to collapse
I use Pocket informant and the Blank Contact Issue is not in this rom using Pocket Informant in any dpi...But I did not try it with the Native Contact App.
amtech said:
is it possible to change the current boot logo (smart mobility test only not for sale) to the default htc?
Click to expand...
Click to collapse
I believe Irus's plan is to replace the Splash Screens. He created a thread asking for someone or many people to create splash screens for the Rom. So since no one has provided any yet and this is a beta rom, the splash's will be added later. You can also create and put in your own splash screens too. Below is his thread asking for Splash Screens.
http://forum.xda-developers.com/showthread.php?t=397552
Montecristo said:
When I press the button of my bluetooth does not do anything… does not abre voice to me to dialer nor nothing….
Click to expand...
Click to collapse
This is Lite or Vanilla Rom, therefore no voice command application is included in the Rom. Which is good, since you can install the one you prefer. There are several cabs available for either Cyberon or Microsoft Voice Command available. Choose your preference, search and install the one you want.
This rom is fast. GPS lock real quick
beginner said:
Thanks Irus, is nice to see we are progressing, with your support of course. Just a question, I suppose is Ozvga included? Should be possible to have RealVga?
My question is because I think most of us use on 128 dpi.
Click to expand...
Click to collapse
realvga is in the rom
fards said:
http://asapload.com/117411 mirrors for the 3.5spl
Irus use asapload in future it makes life simpler for everyone..
Click to expand...
Click to collapse
ok i will start using it. but if i for get just remind me
retroqwe said:
has the problem with blank contacts been overcome?
Click to expand...
Click to collapse
only in 192dpi but not in 128 or 96. i ask pawel what files he use for it to work in 96 but he has not responded yet. im sure he is busy so when he gets a chance he will let me know
retroqwe said:
has the problem with blank contacts been overcome?
Click to expand...
Click to collapse
The problem is still there in 96dpi and 128dpi.
However, it is fine in 192dpi.
oops, irus has already responded.
eagle 1 said:
This is Lite or Vanilla Rom, therefore no voice command application is included in the Rom. Which is good, since you can install the one you prefer. There are several cabs available for either Cyberon or Microsoft Voice Command available. Choose your preference, search and install the one you want.
Click to expand...
Click to collapse
Already this that you explain to me.
I have installed the Cyberon and works all good… but when pressing the button of my Jabra 8010 does not take the program, I have tried with the Vito Dialer and either… there is no something in the registry that does not take the button from my bluetooth.
install AP4 Cyberon Voice Commander from AP4 Addons
Delete shortcuts created in Start Up Folder
Install Cyberon Voice Commander form Irus 6.1 addons
then it will work fine!
OK guys,
Thanks to all hose who Beta tested the Neon WM6.1 Rom for the NEON.
I have just released V1:
Based on feedback from Beta testers this is the change log:
V1:
* Fixed HSPDA - When connection is idle 3G icon shows up, but when you use the connection it switches to HSPDA.
* Pagepool changed to 8mb
* Removed Diamond Dialer
* Kaiser Tweak
* Diamond USB to PC
* Reg Hack Hide Sim Contacts
* Reg Hack disable security warning
Important note: This Rom has only been tested with Radio 1.58.25.17. If you experience problems with your current Radio and this Rom you can download the Radio from the link at the bottom of the post.
These guys deserve a big thanks, Shortyboy and jcostanza4
Links
Public Beta: No longer supported, please update to V1 or V2
Radio 1.58.25.17 http://rapidshare.com/files/121638802/RUU_NEON_Radio_1.58.25.17.rar
NEON V1 http://rapidshare.com/files/127032001/Neon_WM6_1_RV1.rar
Pictures
Reserved for Updates
can somebody post this radio?
disflipissofresh said:
can somebody post this radio?
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/showthread.php?t=395384
freeze after flash
flash my one today and it freeze after loading into OS. You can't do anything except it need to soft reset and it start all over again. Have to flash it back to telstra ROM update.
avast detect trojan
could you give a quick scan with avast antivirus as this detect trojan when try to download
great !
did u have a link for the dialer !
Thx ?
i have an artemis !
Post #1 updated with new Rom.
thanks!
This worked perfectly with my Telstra HTC Touch dual (Neon) device.
For any other newbies like me, this is all I did-
Took my brand new Telstra Australia Touch Dual.
Installed the Neon Hard-spl here-
http://forum.xda-developers.com/showthread.php?t=377260&highlight=neon
Then just installed the rom in this thread. It works great, though i've lost my Office Mobile apps.
I had no sound at all on the first boot, but after reboot (and it does tell you to reboot again) everything was fine.
Thanks! And I look forward to trying your future releases.
woops one issue
An update on my install, I did actually end up having issues where as soon as a call was made or received all sound stopped working (which obviously makes calls a problem)
As per the original post, installing the updated Radio which took me from version .15 to .17 seems to have fixed this problem.
So are you saying that this ROM doesn't have
* video calling
* office apps
* or SOLITAIRE!?
Can they be installed afterwards or anything?
Cheers
jbng
Okay so I freaked a little when the camera stopped working and my guitar tuner wouldn't work, but it turned out I had to update the radio and that fixed both problems. It does seem to be smoother too.
Office apps are there, solitaire is there, but alas no video calling.
Can you get a third party app to do that, or will we have to re-flash the ROM if and when you add the 3G dialer?
I'm getting a bit sick of this hard reset rigmarole - although I am getting much more efficient at it!
Appreciate your work Seth - keep it up. BTW, the ROM update seems to have fixed my 'not waking up from standby' issues.
Cheers
jbng
You can use User Customization, works for me you only have to run it once after the hard reset and all you've configured will be setup. Maybe if Seth is really nice he will include it in his rom the next time so you don't have to run it manually. Check this thread: http://forum.xda-developers.com/showthread.php?t=366337&highlight=uc+junkies
jbngar said:
Okay so I freaked a little when the camera stopped working and my guitar tuner wouldn't work, but it turned out I had to update the radio and that fixed both problems. It does seem to be smoother too.
Office apps are there, solitaire is there, but alas no video calling.
Can you get a third party app to do that, or will we have to re-flash the ROM if and when you add the 3G dialer?
I'm getting a bit sick of this hard reset rigmarole - although I am getting much more efficient at it!
Appreciate your work Seth - keep it up. BTW, the ROM update seems to have fixed my 'not waking up from standby' issues.
Cheers
jbng
Click to expand...
Click to collapse
I'll try to make a cab for Video call now that i have figured out how to fix it.
You can always try my new Rom it has video dialing built in.
http://forum.xda-developers.com/showthread.php?t=403436
Thanks for all your work Seth
The ROM is working great - no lockups at all since installing it.
I seem to have conflicting information about Bluetooth being affected by radio ROMs - what's your opinion? The reason I ask is that my bluetooth range is pretty shocking (it won't even go through one thin wall in the next room) and I was thinking that maybe one of the newer radio roms might improve it.
Will the Niki roms on the radio page work in a Neon? Should 1.65x radios work with your ROMs? The 1.65s there seem to be from a Kaiser.
The other thing I've seen is a HTC-supplied 'bluetooth hotfix' for the TytnII - any opinion on that?
We'll hang out for your video calling CAB/ROM too. Not that I ever really video call, but if someone asks 'can you do video calling?' I want to be able to say that I can... ;-b
Actually that's a thing - if someone video calls ME, will I be able to answer with the current ROM?
Cheers mate
jbng
jbngar said:
Thanks for all your work Seth
The ROM is working great - no lockups at all since installing it.
I seem to have conflicting information about Bluetooth being affected by radio ROMs - what's your opinion? The reason I ask is that my bluetooth range is pretty shocking (it won't even go through one thin wall in the next room) and I was thinking that maybe one of the newer radio roms might improve it.
Will the Niki roms on the radio page work in a Neon? Should 1.65x radios work with your ROMs? The 1.65s there seem to be from a Kaiser.
The other thing I've seen is a HTC-supplied 'bluetooth hotfix' for the TytnII - any opinion on that?
We'll hang out for your video calling CAB/ROM too. Not that I ever really video call, but if someone asks 'can you do video calling?' I want to be able to say that I can... ;-b
Actually that's a thing - if someone video calls ME, will I be able to answer with the current ROM?
Cheers mate
jbng
Click to expand...
Click to collapse
See post 1 for the new Video Dialer.
In regards to the radios have a read here: http://forum.xda-developers.com/showthread.php?t=369502
I haven´t had much time to play with Radios. I´m using the radio of my post and my bluetooth is fine. The range is excellent, i live on the second floor and i still can get my cars bluetooth out the back in the carpark.
Hey Seth
VIDEO DIALER: didn't work. At all. I installed the cab, soft reset and had no phone dialer whatsoever. I don't mind reflashing the rom if that's what needs to be done - is the rom file on the front page updated with the video dialer? Or if the cab doesn't work will the rom not work too?
RADIO ROMS: it seems that the one you list is the best and latest for the Neon. The Niki ones and the Kaiser ones simply won't load. It's largely irrelevant anyway - because I don't think it's the phones problem...
BLUETOOTH: I faffed around for ages last night doing some tests with my dual and my decrepit old o2 mini (which used to have great bluetooth range) and it seems that the problem may be with the transmit power on my *computer* rather than on the dual. I left my dual next to my laptop at one end of the house, and then went to the other end of the house and did a search with the o2 mini. it found the dual but NOT the computer. I swapped phones and searched with the dual from the other end of the house and the same thing happened. So the phones have good range to each other, but they're both having trouble finding the computer.
I'm just waiting to get my hands on another laptop with bluetooth and then I can see if I need to call the good folk at Dell to replace my bluetooth module perhaps.
I'm also wondering if the laptop has gotten into its head that it's a 1m device instead of a 10m device. It's strange that I've only noticed it since getting my new phone, and now the old phone seems to have limited range too.
Anyways, blah blah blah - please let me know if you get any further with the video dialling in either the rom or the cab - and/or if there's anything you'd like me to test out for you.
Cheers
jbng
jbngar said:
Hey Seth
VIDEO DIALER: didn't work. At all. I installed the cab, soft reset and had no phone dialer whatsoever. I don't mind reflashing the rom if that's what needs to be done - is the rom file on the front page updated with the video dialer? Or if the cab doesn't work will the rom not work too?
RADIO ROMS: it seems that the one you list is the best and latest for the Neon. The Niki ones and the Kaiser ones simply won't load. It's largely irrelevant anyway - because I don't think it's the phones problem...
BLUETOOTH: I faffed around for ages last night doing some tests with my dual and my decrepit old o2 mini (which used to have great bluetooth range) and it seems that the problem may be with the transmit power on my *computer* rather than on the dual. I left my dual next to my laptop at one end of the house, and then went to the other end of the house and did a search with the o2 mini. it found the dual but NOT the computer. I swapped phones and searched with the dual from the other end of the house and the same thing happened. So the phones have good range to each other, but they're both having trouble finding the computer.
I'm just waiting to get my hands on another laptop with bluetooth and then I can see if I need to call the good folk at Dell to replace my bluetooth module perhaps.
I'm also wondering if the laptop has gotten into its head that it's a 1m device instead of a 10m device. It's strange that I've only noticed it since getting my new phone, and now the old phone seems to have limited range too.
Anyways, blah blah blah - please let me know if you get any further with the video dialling in either the rom or the cab - and/or if there's anything you'd like me to test out for you.
Cheers
jbng
Click to expand...
Click to collapse
I will do two things tonight.
1 - I'll flash this Rom back on my device, i'm currently using SETHS DIAMOND V2 Build 19214.1.0.4. And i'll try to work out why the Cab doesn't work.
I'll rebuild this rom and include the video dialer if point one fails.
Cheers
Hey Seth
In the interests of 'giving something back' - here's a handful of splash screens for the diamond and the neon for you to take or leave...
Your 'logo' is supposed to be a square ROM chip but with griddle lines over it (you're a chef, after all). It also happens to be an 'S'.
If you want any further tweaks or raw files let me know.
Cheers
jbng
PS. While we're on the subject of splash screens, I get an 'access denied' error when I try to replace the windows mobile startup .png file on your latest Neon ROM. Any ideas why that would be the case? With the previous ROM my file just copied straight over the top.
jbngar said:
Hey Seth
In the interests of 'giving something back' - here's a handful of splash screens for the diamond and the neon for you to take or leave...
Your 'logo' is supposed to be a square ROM chip but with griddle lines over it (you're a chef, after all). It also happens to be an 'S'.
If you want any further tweaks or raw files let me know.
Cheers
jbng
PS. While we're on the subject of splash screens, I get an 'access denied' error when I try to replace the windows mobile startup .png file on your latest Neon ROM. Any ideas why that would be the case? With the previous ROM my file just copied straight over the top.
Click to expand...
Click to collapse
Hi jbng,
Thanks for the wonderful images. The only program i know that can overwrite system files is Total commander. Just copy the file to your storage card and then use total commander to overwrite.
If that doesn´t work i posting 4 cabs on my latest Neon Rom for who ever wants to use your great artwork.
Regarding the Video dialer i just realized that RV1 has video calling, only the public beta didn´t. Please update your rom to either V1 or V"2.
Thanks
Hello!
I would like to get a copy of DCD's kitchen for his rom 3.2.0 and 3.2.2 (or the closest one to that).
The reason for that is that I want to compare what has changed between the two and hopefully locate the file that makes it so that skype 2.1.0.66 hasn't been working anymore since 3.2.x versions.
Somehow, DCD's site is down and I can't locate those files I need.
Any help?
Thanks!
i have the rom on my hard drive and 3.2.2 as a kitchen. if google dosnt find it i can send them to you
stanelie said:
Hello!
I would like to get a copy of DCD's kitchen for his rom 3.2.0 and 3.2.2 (or the closest one to that).
The reason for that is that I want to compare what has changed between the two and hopefully locate the file that makes it so that skype 2.1.0.66 hasn't been working anymore since 3.2.x versions.
Somehow, DCD's site is down and I can't locate those files I need.
Any help?
Thanks!
Click to expand...
Click to collapse
Here's a link to the last several Kitchens.....
http://dcd1182.n715dp.com/titan/kitchens/
stanelie said:
the file that makes it so that skype 2.1.0.66 hasn't been working anymore
Click to expand...
Click to collapse
is msxipkernel\nk.exe
Thanks DCD.
Is there an adverse effect in replacing that file in your newer rom? (aside from making skype work?)
Hum...
NK.exe is THE kernel...
Switching it might be a bad idea I guess, it might break lots of things?
Stuck on 3.2.0 until skype fixes their software I guess...
stanelie said:
Thanks DCD.
Is there an adverse effect in replacing that file in your newer rom? (aside from making skype work?)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2426507&postcount=46
Since dcd knows which file causes the issue and hasn't found a decent workaround/replacement for the file, I'd be willing to bet it isn't a "plug-in the file from a different WM version" fix. As I recall this was a pretty hot issue when WM6.1 surfaced and I believe the post below might say it best.
http://forum.ppcgeeks.com/showpost.php?p=434875&postcount=52
It seems Skype isn't interested in supporting our phone and they have the resources of eBay. If they wanted to support us (and a vast number of other phones,) they could..... but they don't. That's called a "marketing decision" when big corporations do it..... specifically, a "poor marketing decision."
I've seen services called "iSkoot" and "Nimbuzz" mentioned as alternatives.
Well,
I just tried both : Nimbuzz does not hear anything from my Titan's microphone and iSkoot wants to call their gateway with a regular phone call, which is long distance for me, so, it's out of the question.
I also do not get any audio with fring on my phone.
Any other ideas before I flash back to DCD 3.2.0?
imo, this was due to an idiotic/crappy/lazy slap wm6.0 code into wm6.1 platform builder move by HTC ... It worked, with some weird side effect on code that uses critical sections it seems... well, not all code... mainly multimedia apps (such as tcpmp). Unfortunately, until HTC fixes the kernel with the correct code, we are out of luck.
3.2.1 and above also broke SRS WOW
it seems the kernel update broke a few media apps...specifically the ones the tried to interface with the audio or mic
no2chem said:
imo, this was due to an idiotic/crappy/lazy slap wm6.0 code into wm6.1 platform builder move by HTC ... It worked, with some weird side effect on code that uses critical sections it seems... well, not all code... mainly multimedia apps (such as tcpmp). Unfortunately, until HTC fixes the kernel with the correct code, we are out of luck.
Click to expand...
Click to collapse
the kernels are device specific? i thought they're coded by microsoft and deployed by the manufactures like windows for PCs...that's news to me.
hello frnd. i have faced a few problems cooking wm6.5 roms recently. which if you find a solution then share with me asap. am not releasing newer version of my roms cause am busy with my exams and not able to get enough time to fix these bugs.
1st of all am using da_g's kitchen for wm6.5:
here are the problems i am having..
1st. i use youtube that does not require touch flo 3d. you only provided me with the oem. i open application. it loads the videos section. but when i click on any video to view it, i get an error " cannot play this video" i have tried to cook flashlite3 as well as the oone in da_g's kitchens but with no help.
2nd where can i get oem or cab for htc gesture 2. tried searching.
3rd Da_g's recording modification with wm dialer is great. but is it possible to add it to htc dialer?? although have sent him this ques but still if other could fine a soln.
4th how to change link to chome photos directry
5th i dont want date and time setting to start on clicking clock at chome. i dont want anything to happen when i click on clock in titanium.
6th the volume managers do install and work fine normally. but during call, i do not get the call volume display to change call volume. instead i get the usual system and ring volume control display and am unable to change call volume. i have tried both standard and topaz volume manager. could be a build issue but not able to fins a soln yet.
am using notification menu with buttons. could this be causing the issue.?
if you are able to find any possible solutions then feel free to let me know.
Why didn't you posted this in Da_G's WM 6.5 thread?
I think you will get there a better response
sunnyin86 said:
if you are able to find any possible solutions then feel free to let me know.
Click to expand...
Click to collapse
I will let u know when I feel free
(+Shazad.K)