Hi i flash to my MDA Vario IPL/SPL 3.08 but i can't downgrade !!
Any way to downgrade my MDA ???
It's CDI-Locked
Please help me !!
Thx !!!
If it is really G4, then you have a brick.
not exactly true !
you can download the softspl software which is on this forum,
who is your service provider vodafone, orange etc... ? which country
as you can reflash your ipl/spl back to the original carriers version with this software !
look at this post, it tell you all you need to know in the 1st couple of posts and all files are there...
http://forum.xda-developers.com/showthread.php?t=342744
starkwong is absolutely right,if its a G4 ,flashing 3.08 will definitely brick the phone.
bleep
SoftSPL doesn't reflash back the original official ipl/spl of the carrier,it just only flashes the patched ipl/spl to the phone temporarily to trick the phone in thinking its CID unlocked.Do not misguide the newbies.
CrazyXbox360
Are you sure its a G4 ?what was the original ipl/spl of the phone,before upgrading to 3.08, what is the present status of the phone,does it load up to any OS or is it stuck at bootloaders(tricolor screen) or is it completely dead,non responsive ?
I flashed my G4 with ipl 3.08 but on that post i linked too there are the original ipl/spl files for most carriers and then you put that .nbf in the same directory as softspl (as you would when doing a rom flash) and he presto my ipl/spl is now back to original !
So im talking from my own expereince !
Okay i have a real G4 with IPL/SPL 3.08 !!
But nothing work to downgrade !!
Its a T-Mobile MDA Vario GER
Phone work 100% but i cant flash to a other Firmware !
Download the WST 4.2.2 tool ,run it and post the report it generates here.
WST 4.2.2 tool not work on IPL/SPL 3.08 G4
Post the exact version strings when your are in tri-color screen (If you really flashed G3 SPL to G4, the device should not be able to boot and stays on tri-color screen, which you are not able to use WST).
If IPL is 2.2x.0001 and SPL is 3.08, then it is definitely a brick. If IPL is 3.08 (or 3.08.0000) and SPL is 3.08 (or 3.08.0000), then you misunderstand it, it is a G3 not G4.
cosmabgd said:
WST 4.2.2 tool not work on IPL/SPL 3.08 G4
Click to expand...
Click to collapse
You sure?
Use the "Device Info" button and post the result here...
I have a G4 and accidently flashed wizard love which gave me ipl 1.01 instead of 1.01.XXX. I used SoftSPL-V0.1 to update my ipl back to 2.01.XXX but I still can't flash any rom
did you try to flash it with a "No Vendor ID" Flasher?
HELLO ,I have an I-mate k-jam ,I did the cid ulock,http://www.imei-check.co.uk, the unlock went well and restore the rom tnt 6.0.After I decided to install a new rom Slimv3.1(diamond ) and the wizard after charging correctely the rom started up with the screen with the colour bar:
IPL 2.21.0001
SPL2.21
got stuck on it
I try to to do hardSPL AND softSPl ,doesn't reconise the wizard(no device conneted)
I try to restore original Rom and wizard love :doesnt work ERROR 300
If someone have any idea help me.
thanks
IPL 2.21.0001
SPL2.21
Is it SPL 2.21 or 2.21.0001?
If its 2.21,than I'm afraid you got mixed Bootloaders (IPL/SPL) of G3 and G4,
IPL 2.21.0001 being G4 where as, SPL 2.21 being G3,in this situation nothing can be done to revive it.
How did you get this ?
I try this rom slimv 3.1
Hi all
I,ve got wizard with cid locked and stuck on bootloader IPL 2.26 SPL 1.03... i,ve tried everything to repair it, even rapair love rom...
do you think if if downgrade ipl to 1.03 it will help? the problem is that i don't have such a .nbf with the ipl 1.02
please help
Are you sure it is a G4? It shouldn't be even able to power on because the IPL and SPL version you provided is should not appear in G4!
..i tried to install new windows..but ..later it just end up leaving in bootloader mode ...i tried hard spl...hard reset...tried unplug usb and battery too ..but neither work....can anyone help me to retain my jamin.....in bootloader mode it shows
IPL 1013.0001
SPL 2.20.0001
and when i do hard spl it shows
IPL 1013.0001
SPL 2.20.0001
GSM 02.47.21..with imate background ..and dont go further..
help please
which Windows Version u flashed? Cause you have a G4 Device. I hope you flashed G4....
i didi g4
ya ..i did G4...
مشكووووووووووووووووووور
try the Prophet Tools Light.
when i wanted upgrade my pm300 from wm5 to wm6.1 wm61_korand_3_1.befor i was cidunlock my ppc .when i flashed with wm 6.1 its stuck at bootloader
IPL 2.15.0001
SPL 2.15.0001
any one can help me thanks adv
I think it is dead, because you don`t read the hundreds of "stuck in bootloader" treads here in the prophet forum. Good luck.