G4 IPL/SPL 3.08 downgrade ! - G4

Hi i flash to my MDA Vario IPL/SPL 3.08 but i can't downgrade !!
Any way to downgrade my MDA ???
It's CDI-Locked
Please help me !!
Thx !!!

If it is really G4, then you have a brick.

not exactly true !
you can download the softspl software which is on this forum,
who is your service provider vodafone, orange etc... ? which country
as you can reflash your ipl/spl back to the original carriers version with this software !
look at this post, it tell you all you need to know in the 1st couple of posts and all files are there...
http://forum.xda-developers.com/showthread.php?t=342744

starkwong is absolutely right,if its a G4 ,flashing 3.08 will definitely brick the phone.
bleep
SoftSPL doesn't reflash back the original official ipl/spl of the carrier,it just only flashes the patched ipl/spl to the phone temporarily to trick the phone in thinking its CID unlocked.Do not misguide the newbies.
CrazyXbox360
Are you sure its a G4 ?what was the original ipl/spl of the phone,before upgrading to 3.08, what is the present status of the phone,does it load up to any OS or is it stuck at bootloaders(tricolor screen) or is it completely dead,non responsive ?

I flashed my G4 with ipl 3.08 but on that post i linked too there are the original ipl/spl files for most carriers and then you put that .nbf in the same directory as softspl (as you would when doing a rom flash) and he presto my ipl/spl is now back to original !
So im talking from my own expereince !

Okay i have a real G4 with IPL/SPL 3.08 !!
But nothing work to downgrade !!
Its a T-Mobile MDA Vario GER
Phone work 100% but i cant flash to a other Firmware !

Download the WST 4.2.2 tool ,run it and post the report it generates here.

WST 4.2.2 tool not work on IPL/SPL 3.08 G4

Post the exact version strings when your are in tri-color screen (If you really flashed G3 SPL to G4, the device should not be able to boot and stays on tri-color screen, which you are not able to use WST).
If IPL is 2.2x.0001 and SPL is 3.08, then it is definitely a brick. If IPL is 3.08 (or 3.08.0000) and SPL is 3.08 (or 3.08.0000), then you misunderstand it, it is a G3 not G4.

cosmabgd said:
WST 4.2.2 tool not work on IPL/SPL 3.08 G4
Click to expand...
Click to collapse
You sure?
Use the "Device Info" button and post the result here...

I have a G4 and accidently flashed wizard love which gave me ipl 1.01 instead of 1.01.XXX. I used SoftSPL-V0.1 to update my ipl back to 2.01.XXX but I still can't flash any rom

did you try to flash it with a "No Vendor ID" Flasher?

Related

G4 with mixed IPL/SPL

Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Only with a JTAG device. It's a special device that can access the chips without the need for the phone to be working. But nobody knows which are the JTAG pins so no luck here.
The IPL 1.xx is meant for the G3 DOC chip Wizards and G4 all have IPL/SPL starting at 2.xx.xxxxx. Since IPL is the firt bootloader with information and addresses for SPL and since they don't match you'll never get out of that situation...
Thanks for reply. I have JTAC device and will try to find jtag pinouts for Wizard G4.
havy said:
Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Click to expand...
Click to collapse
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
dont know how
kdskamal said:
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
Click to expand...
Click to collapse
(1) OK
(2) DONT KNOW HOW!!
Please help, i never did this. how do i flash the phone if my comp does not recognise it (i can only enter the bootloader screen).
You should
1) Flash only IPL/SPL from g4 (f.e. 2.26.0001) to get your SPL/IPL the same with italian RUU 2.5.2
2) Flash ROM without IPL/SPL italian RUU 2.5.2
yesterday we bringed such device to live) try
how do you compare that with Atom
Hi,
I have got O2 Arom.
does anyone know whether my device is equivelent to G3 or G4?? or its completely diff technology that cannot be compared!!!
I know O2 Atom is by Quanta and it uses CPLD (Complex programmble Logic Design!! I hope i remember this right).
this can't be compared at all, totally different technology. there is a whole separate section for the atom. just go to the forum root page and look for the atom.

please help upgrade problem

--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
First u dont have a G4 device....
See
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Second i think u flashed ure phone death cause of the wrong rom version (G4 instead of G3)
hi,
i think he does!
G4 is *.000X
G3 is *.000
I had SPL 2.09.0000 too, and used the G4 upgrade utility to wm6 and worked good.
regards
RP
tropheuz said:
hi,
i think he does!
G4 is *.000X
G3 is *.000
I had SPL 2.09.0000 too, and used the G4 upgrade utility to wm6 and worked good.
regards
RP
Click to expand...
Click to collapse
well since his device is not working i think he didnt
i have .0000, been flashing G3 all my life...

hard_SPL not working on my O2 Xda Mini S

I tried the following steps on my O2 Xda Mini S and after rebooting it doesn't show the SPL is 2.21.olip. It just show the original version.
Any help out there?
-connect your device
-Start hard_SPL-G4.exe
-Push the "Check DOC" button
-> The tool now checks whether your device is truly a G4, if not, it will give you an error and stops.
-> after this a dos box pops up, and it loads the softSPL to your device, to enable hard-SPL flashing.
-> then a Rom Update Utility will start, ONLY proceed if your screen is white!
-Proceed with the upgrade, it will only take a minute.
After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip
Thanks
What is your current ROM, IPL/SPL?
Have you tried another USB port, or even another computer?
try to ugrade other rom (try the new TNT )version but take care ROM must be without ipl and spl !!!
here is link for version with ToucFlo
don't forget to use MUN's RUU
make the update on yours root drive !!! C:/ !!! i mean the update and ROM files must be on it !!!
Let the proccess going to the end and if it stops at 99% don't panic
wait and it will end and restart !!!
to mrobo and equinoxe
thanks both of you for your reply.
i haven't tried different computer(my other computer is a mac), but i have tried different usb.
Following version.
IPL 2.21.001
SPL 2.21.001
GSN 02.07.10
OS 2.21.4.1
Rom version is still the one that came with it from O2.
Do i need to do the hard_spl before upgrade the rom to one of those you told me?
Thanks .
its g3. Read damn topics
mghandour20 said:
thanks both of you for your reply.
i haven't tried different computer(my other computer is a mac), but i have tried different usb.
Following version.
IPL 2.21.001
SPL 2.21.001
GSN 02.07.10
OS 2.21.4.1
Rom version is still the one that came with it from O2.
Do i need to do the hard_spl before upgrade the rom to one of those you told me?
Thanks .
Click to expand...
Click to collapse
ignore kubek1334
Do you mean IPL 2.21.001 SPL 2.21.001 or
IPL 2.21.0001 SPL 2.21.0001?

NEED HELP

HELLO ,I have an I-mate k-jam ,I did the cid ulock,http://www.imei-check.co.uk, the unlock went well and restore the rom tnt 6.0.After I decided to install a new rom Slimv3.1(diamond ) and the wizard after charging correctely the rom started up with the screen with the colour bar:
IPL 2.21.0001
SPL2.21
got stuck on it
I try to to do hardSPL AND softSPl ,doesn't reconise the wizard(no device conneted)
I try to restore original Rom and wizard love :doesnt work ERROR 300
If someone have any idea help me.
thanks
IPL 2.21.0001
SPL2.21
Is it SPL 2.21 or 2.21.0001?
If its 2.21,than I'm afraid you got mixed Bootloaders (IPL/SPL) of G3 and G4,
IPL 2.21.0001 being G4 where as, SPL 2.21 being G3,in this situation nothing can be done to revive it.
How did you get this ?
I try this rom slimv 3.1

G4 k-jam hard spl and not opened :( pls help me

i have a problem.i did hard spl to my k-jam. my k-jam(G4)'s ipl spl was 2.26 and i did it 3.08.then i tried it to do wm 6.5(with no ipl spl) but it did not work and ruu end when it was half.and now k-jam does not open and not charging.whan can i do? please help me
xnn said:
i have a problem.i did hard spl to my k-jam. my k-jam(G4)'s ipl spl was 2.26 and i did it 3.08.then i tried it to do wm 6.5(with no ipl spl) but it did not work and ruu end when it was half.and now k-jam does not open and not charging.whan can i do? please help me
Click to expand...
Click to collapse
Your IPL/SPL was 2.26?
That is a G3 IPL/SPL, A G4 IPL/SPL should have been 2.26.0001.
Did the 3.08 upgrade work (that is not a hard SPL either, so without superCID you can't upgrade your ROM.
Please revert to original ROM, then be sure that your Device is either G3 or G4.
unlock the CID accordingly.
Regards,
EqX
xnn said:
i have a problem.i did hard spl to my k-jam. my k-jam(G4)'s ipl spl was 2.26 and i did it 3.08.then i tried it to do wm 6.5(with no ipl spl) but it did not work and ruu end when it was half.and now k-jam does not open and not charging.whan can i do? please help me
Click to expand...
Click to collapse
Had the same problem, the K-Jam is now completely dead - no sign of life whatsoever.
so sorry the-equinoxe . iremembered sth. i did hard spl to my k-jam and it was like that after hard spl : İPL SPL 2.26.0001olip . i did not do it 3.08 sorry for this.
and when i opened RUU fora WM6.5 rom it gived an error. so k-jam was black screen.
then i charged,get the usb,put out battery but it still doesnt work.

Categories

Resources