--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
First u dont have a G4 device....
See
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Second i think u flashed ure phone death cause of the wrong rom version (G4 instead of G3)
hi,
i think he does!
G4 is *.000X
G3 is *.000
I had SPL 2.09.0000 too, and used the G4 upgrade utility to wm6 and worked good.
regards
RP
tropheuz said:
hi,
i think he does!
G4 is *.000X
G3 is *.000
I had SPL 2.09.0000 too, and used the G4 upgrade utility to wm6 and worked good.
regards
RP
Click to expand...
Click to collapse
well since his device is not working i think he didnt
i have .0000, been flashing G3 all my life...
Related
Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Only with a JTAG device. It's a special device that can access the chips without the need for the phone to be working. But nobody knows which are the JTAG pins so no luck here.
The IPL 1.xx is meant for the G3 DOC chip Wizards and G4 all have IPL/SPL starting at 2.xx.xxxxx. Since IPL is the firt bootloader with information and addresses for SPL and since they don't match you'll never get out of that situation...
Thanks for reply. I have JTAC device and will try to find jtag pinouts for Wizard G4.
havy said:
Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Click to expand...
Click to collapse
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
dont know how
kdskamal said:
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
Click to expand...
Click to collapse
(1) OK
(2) DONT KNOW HOW!!
Please help, i never did this. how do i flash the phone if my comp does not recognise it (i can only enter the bootloader screen).
You should
1) Flash only IPL/SPL from g4 (f.e. 2.26.0001) to get your SPL/IPL the same with italian RUU 2.5.2
2) Flash ROM without IPL/SPL italian RUU 2.5.2
yesterday we bringed such device to live) try
how do you compare that with Atom
Hi,
I have got O2 Arom.
does anyone know whether my device is equivelent to G3 or G4?? or its completely diff technology that cannot be compared!!!
I know O2 Atom is by Quanta and it uses CPLD (Complex programmble Logic Design!! I hope i remember this right).
this can't be compared at all, totally different technology. there is a whole separate section for the atom. just go to the forum root page and look for the atom.
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Don't know for sure that it will help, but when you want to connect to your PC in USB mode (bootloader) you should first disable "Allow USB CONNECTION" in the conections settingpanel of Active Sync.
thanks i'll give it a try
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Try to search the new ROM update utility and try to reflash using it.
pda is dead
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
dj00912 said:
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
Click to expand...
Click to collapse
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
chavdar said:
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
Click to expand...
Click to collapse
It's beter NOT to use any backup software when you migrate from WM5 to WM6 or the other way around. Sync first with your desktop ans sync back after upgrading. The standard location are not the same, so it is messy when you replace the files to their original positions.
Hi guys I need some help. I have a Cingular HTC 8125, I was trying to upgrade the rom on it to a new WM6 and here is what happened.
I have been researching the topic for about 3 weeks.
Its a G4 Device being upgraded with VISTA w/ Moded drivers for Ative SYNC
IPL 2.25.0001
SPL 2.25.0001
I used the shell tool to install one of the roms waited about 2 hrs and finally noticed that the window was NOT RESPONDING so I had to shut down and start over. The phone got to the second screen but froze there now showing
IPL 2.25.0001
SPL 2.25.0001
GSM 02.25.11
OS 10.1.0.811
On the Cingualr Background, I can still enter the Bootloader screen but nothing else?
Nothing else happens I cant connect the phone to the PC to do anything else.
Is it bricked or not is my question and what can I do to flash OEM rom or something that will work.
I tried OEM Cingular rom but I get ERROR 260 No connection to the phone?
Any help will be greatly appreciated!
Bricked phone
You should had firstly either hardspl or soft spl the phone b4 trying to load any rom
It's not bricked as long as you can see the RGB screen (Colors red, green and blue)showing the same IPL/SPL such as yours; IPL: 2.25.0001 and SPL: 2.25.0001. AND PLEASE BE CAREFUL WITH YOUR DEVICE CAUSE ITS G4 MEANING YOU CAN NOT JUST INTALL/FLASH ROM. Make sure that the Rom you flash not contain G3 IPL and SPL which is 2.xx.001. If so, then you will bricked your device.
Desiji is right, you should install rom with softSPL or hardSPL.
Try to flash the Official Cingular Rom or Wizard Love Rom. If success, then you can install other Rom using what desiji said. Just make sure that its a G4 safe rom. And another thing, try to charge battery using wallcharger not in the device. U need enough battery to perform rom flashing.
Hope this help revive your Wizard.
esdee007
WOW !
grrrrr8,you are a quick learner
CateraMV6
Yeah ! I certainly agree with esdee007 and desiji
Thanks
Hey guys thanks, thats what I thought but I think my main problem is the VISTA I need to get a hold of XP and try all that because the Vista is having issues with connecting to the phone at the moment, I can not get it to show it as a device. It does make a beep noise when you connect/disconnect it so its doing something but Vista is just too much of a pain in the rear to deal with.
Its a good news that its not bicked so all hope is not lost.
What is the opinion on Tmobile WING!? any reviews should I get that phone instead?
BTW where do I find these G4 Safe ROMS? and how do I tell if they have the IPL/SPL in them? Do I need to hack them to tell?
And is Soft or Hard recommended?
YUP ! sure vista is still not compatible for flashing,WinXP is highly recommended and trouble free.
All official stock roms are safe to flash both the devices G3 or G4,secondly,all the latest custom build wm6 or wm6.1 are safe for both the devices,as they don't include any IPL/SPL in them.
If you plan to flash many roms,than 'HardSPL' is recommended,coz its done only once and the device remains semi_Cid unlock untill you personally remove HardSPL,but with SoftSPL,its done everytime you want to flash a new rom,choice is all yours,how you want to go about it.
..i tried to install new windows..but ..later it just end up leaving in bootloader mode ...i tried hard spl...hard reset...tried unplug usb and battery too ..but neither work....can anyone help me to retain my jamin.....in bootloader mode it shows
IPL 1013.0001
SPL 2.20.0001
and when i do hard spl it shows
IPL 1013.0001
SPL 2.20.0001
GSM 02.47.21..with imate background ..and dont go further..
help please
which Windows Version u flashed? Cause you have a G4 Device. I hope you flashed G4....
i didi g4
ya ..i did G4...
مشكووووووووووووووووووور
try the Prophet Tools Light.
I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....
shehzad143 said:
I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547