Qtek S200 Stuck at bootloader - JAMin, XDA Neo, S200 ROM Development

I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....

shehzad143 said:
I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547

Related

Upgrade problem please help

--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Don't know for sure that it will help, but when you want to connect to your PC in USB mode (bootloader) you should first disable "Allow USB CONNECTION" in the conections settingpanel of Active Sync.
thanks i'll give it a try
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Try to search the new ROM update utility and try to reflash using it.
pda is dead
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
dj00912 said:
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
Click to expand...
Click to collapse
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
chavdar said:
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
Click to expand...
Click to collapse
It's beter NOT to use any backup software when you migrate from WM5 to WM6 or the other way around. Sync first with your desktop ans sync back after upgrading. The standard location are not the same, so it is messy when you replace the files to their original positions.

please help upgrade problem

--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
First u dont have a G4 device....
See
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Second i think u flashed ure phone death cause of the wrong rom version (G4 instead of G3)
hi,
i think he does!
G4 is *.000X
G3 is *.000
I had SPL 2.09.0000 too, and used the G4 upgrade utility to wm6 and worked good.
regards
RP
tropheuz said:
hi,
i think he does!
G4 is *.000X
G3 is *.000
I had SPL 2.09.0000 too, and used the G4 upgrade utility to wm6 and worked good.
regards
RP
Click to expand...
Click to collapse
well since his device is not working i think he didnt
i have .0000, been flashing G3 all my life...

What to do now

Hi All,
I tried flash by wizard following http://forum.xda-developers.com/showthread.php?t=298967
Every thing went well but I was not able to HARD RESET. So instead I removed the battery and started it again. It starts up but got struck at screen which says
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.18.00
Could some help me what to do now. I read some threads to go to Boot loader screen by pressing "Camera" + "Reset" button and got USB at bottom left and tried RUU with some thing available on forum but every thing failed saying "connection not established"
Please guide me to solve this problem.
if ur device is CID LOCKED "G4" u need to flash the official rom 1st then flash with any G4 safe rom available >>
USING :
ShellTool
http://forum.xda-developers.com/showthread.php?t=293480
or
SoftSPL
http://forum.xda-developers.com/showthread.php?t=329147
Thats the only way for G4 "CID LOCKED"
No...
If OS is not boot up correctly, both ways doesn't work because all of them requires to do in a working OS.
You should find your stock ROM or Wizard Love ROM, use the bundled RUU to flash it so you get the device working again, then use SoftSPL/flash HardSPL and use RUU to flash OS-only WM6 ROMs.
Yes starkwong you are right. I bought my device back working by flashing it with "wizard love" now its up and running. I would proceed with Soft SPL/Hard SPL and then try to flash it with WM6.

PLEASE help my prophet..

Yesterday i want flash my device to wm6. actualy I have g3 device, and my spl stil lates rom from packaging. Mayby i chose the wrong sspl from this forum. i just flash sspl for G4 model. and now my device stuck in bootloader and my spl become 2.G4.4pda, but the screen still detec the "usb", i already try to flash many official rom (wm5). but usb allways connetcion error.. what should i do? please help me.. still i can use my prophet or not? thx alot
You must flash with a wm5 rom to live your prophet.
You can find the no vendor official VM5 ROM here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
and download:
RUU_Prophet_220734_2207114_024721_NVID
Do the steps described in the first post in the following thread:
http://forum.xda-developers.com/showthread.php?t=353547
Check especially 8 steps beginning with "Please ask yourself... 1. did I soft reset....."
Once i was stuck at the tree-color screen, everything was ok but i coudn't establish the connection by RUU and i tried to restart my pc, that didn't help, but i shut it down completely and start again, it worked. Please try..
Use hardspl for G3, not for G4! If there are separate RUUs for G3 and G4 any time, absolutly flash with the one for G3!
Good luck!
krenzz said:
Yesterday i want flash my device to wm6. actualy I have g3 device, and my spl stil lates rom from packaging. Mayby i chose the wrong sspl from this forum. i just flash sspl for G4 model. and now my device stuck in bootloader and my spl become 2.G4.4pda, but the screen still detec the "usb", i already try to flash many official rom (wm5). but usb allways connetcion error.. what should i do? please help me.. still i can use my prophet or not? thx alot
Click to expand...
Click to collapse
If you've flashed a G4 SPL onto a G3 device, it's probably terminal...

no rom to my device. only wm5.

hello all. i have an s200 G4, and it was in german. i tried to cid unlock it (succesufull), then tried to install a wm6.1. Didn't worked, after it was finished all i can see is the bootloader mode (i've removed the battery, put it back and turn on). I tried to get back to wm5, succesufully, and i tried to install a lot's of wm6.1, all are doing the same: bootloader mode instead OS system. what can i do?
Hi !
What did you do to CID-unlock the device ? Are you sure it was successfull ?
I've got a G4 S200 (French SPV M600) myself and I understand the CID unlocking cannot be performed on G4 devices, only G3 (see wiki here).
Did you use any hardspl or something of the sort ?
Regards,
David
yes i've tried. i will tell you tonight if will work with softspl, 'cause i didn't try that.
Ok...
Actually, "HardSPL or SoftSPL" doesn't really mean "CID-unlocking"... It rather enables you to flash ROMs without having to CID-unlock...
But HardSPL doesn't enable you to dump the original shipped ROM for example.
ok. i've made again now hard spl, and. i cannot install another rom instead wm5. what should i do?
so: i have installed Prophet_Orange_UK_ROM and was succesufully, and after that i've run on pda jumpspl and was finished. and after that i've tried several times (each time from beginning) to install many wm6.1 roms, but without success. each time appear bootloader mode after is finished the upgrade process. i've tried also with hardspl too. what can i do something else?
Is your PC using Vista by a chance??
nop. win xp.
What is the devices SPL before and after HardSPL?
It should change. If it does not, then HardSPL was not successful!
The device will not boot to the OS without Hard/Soft SPL being completed.
You can use a tool such as Dioxda2s "lazy tool" to automate the SoftSPL/ROM flash process.
the SPL was changed after hard-spl, i know the procedure. but, after hard-spl, I tried to install wm 6.1 (any version) and was succesfully, but, after it was finished, when to enter in OS, it doesn't. Is remaining in bootloader. but i didn't tried with that tool. I will, thank you very much.
I have the same problem , identicaly .
ady_uaic said:
the SPL was changed after hard-spl, i know the procedure. but, after hard-spl, I tried to install wm 6.1 (any version) and was succesfully, but, after it was finished, when to enter in OS, it doesn't. Is remaining in bootloader. but i didn't tried with that tool. I will, thank you very much.
Click to expand...
Click to collapse
What is your devices IPL/SPL?
it's G4, ....01
ady_uaic said:
it's G4, ....01
Click to expand...
Click to collapse
After having successfully HardSPLed your device, your SPL should be
2.G4.4PDA and not 2.20.0001...
ady_uaic said:
it's G4, ....01
Click to expand...
Click to collapse
IF SO... SAME AS MY G3 (NEVER GOT THE HARDSPL DONE CORRECTLY)
... MAY BE TRY THE LAZY_TOOL UPGRADE... ( LIKE WHAT i DO.... ALWAYS )
ok. thank you
Yeah its happening the same for me aswell. 6.1 gets stuck in bootloader no matter what
gunblade45 said:
Yeah its happening the same for me aswell. 6.1 gets stuck in bootloader no matter what
Click to expand...
Click to collapse
Gratulation you are the winner from nonreading treads. Do you have HardSPL for flashing WM6 Roms ?
Thankyou Thankyou !
The direct wm5 to 6.1 tool worked for me after I downgraded from wm6 to 5. Let it do everything ,no hard spl n crap
Hello,
where to find that direct download.
Your help appreciated

Categories

Resources