So I purchased a UK unlocked Touch Pro and had it shipped to the US. While I hope there will be an ATT radio rom flash in the future, I have a quick question for the veterans out there:
On the Touch Pro, under the Phone Band settings, you can select "GSM(1900+850)+UMTS(1900+850)"
When I do this all I receive is Edge on ATT, but aren't the UMTS bands correct already for ATT under this setting?
ajk1116 said:
So I purchased a UK unlocked Touch Pro and had it shipped to the US. While I hope there will be an ATT radio rom flash in the future, I have a quick question for the veterans out there:
On the Touch Pro, under the Phone Band settings, you can select "GSM(1900+850)+UMTS(1900+850)"
When I do this all I receive is Edge on ATT, but aren't the UMTS bands correct already for ATT under this setting?
Click to expand...
Click to collapse
There are several threads on this topic already...Here's one:
http://forum.xda-developers.com/showthread.php?t=410945
Thanks, I appreciate the reply, but I had read through that thread. I understand that the device is likely in need of a reprogrammed ROM to activate the hardware because at the end of the day it is not working. My question is specifically if the phone setting is allowing me to select the two ATT UMTS bands already why wouldn't I get 3G speed?
ajk1116 said:
Thanks, I appreciate the reply, but I had read through that thread. I understand that the device is likely in need of a reprogrammed ROM to activate the hardware because at the end of the day it is not working. My question is specifically if the phone setting is allowing me to select the two ATT UMTS bands already why wouldn't I get 3G speed?
Click to expand...
Click to collapse
I have the UK version of the phone as well and I have the same issue. I have selected the right bands for both UMTS and GSM but all I get is EDGE. The reason for this is either a hardware limitation (no radio antenna to support 850/1900 UMTS bands (let's hope not) or the factory installed radio firmware does not include those bands or all those da#@ iPhone 3G users are hogging all the UMTS bandwidth . Hopefully all we need is to flash a new radio or ROM to unlock these bands. Just because you can select this band in phone settings does not mean the radio or hardware support it.
I guess I am crossing my fingers along with you . Thanks!
See my thread
http://forum.xda-developers.com/showthread.php?t=418000
Even though this is for T-Mobile im sure if tmo gets unlocked att will to. Watch that and post there if someone cracks it they will post on that thread.
I have a question for the guys only getting EDGE when they have the correct bands set.......do you have a 3G enabled SIM card? (aka a USIM, some networks require you use one for the 3G to be utilised correctly).
Hi, in answer to your question, yes I have a 3G compatible SIM. I literally plucked it out of my TyTN 2/ TILT and put it in to the Touch Pro. The Touch Pro automatically found the ATT network, and when I went in to check bands I realized that there was an option for the US UMTS bands. I am guessing that others have been right when they have stated that just because there is a menu option it doesn't mean the radios are properly enabled.
ajk1116 said:
Hi, in answer to your question, yes I have a 3G compatible SIM. I literally plucked it out of my TyTN 2/ TILT and put it in to the Touch Pro. The Touch Pro automatically found the ATT network, and when I went in to check bands I realized that there was an option for the US UMTS bands. I am guessing that others have been right when they have stated that just because there is a menu option it doesn't mean the radios are properly enabled.
Click to expand...
Click to collapse
So currently you are using a HTC branded Raphael? Could you post your ROM/Radio details? (device info in settings/system) Also your ROM build (settings/system->about)?
mrvanx said:
So currently you are using a HTC branded Raphael? Could you post your ROM/Radio details? (device info in settings/system) Also your ROM build (settings/system->about)?
Click to expand...
Click to collapse
I have a 3G enabled SIM, been using it with the Kaiser for the past year with good 3G reception. I now have the HTC branded Raph (UK version) with no 3G reception, only EDGE. Here's the info on my ROM/Radio:
ROM: 1.90.405.1 WWE (8/1/08)
Build: 19965.1.2.3
Radio: 1.02.25.19
OK so it seems the only radios actually in these Raphaels at the moment are all 1.02.25.19, once we have a decent way to flash a different radio stack to it we can see if it makes any difference both in the bands available and some of the reception issues we are seeing so far.
I'm not an expert in this area at all, far from it, but but was reading Black's post about his AT&T model and he has 1.01.25.16. Is this what you're going to flash it to once the HardSPL is completed given that you know his radio supports AT&T 3G?
I'm trying to keep up...
Has anybody heard an ETA for Hardspl? I know they where testing it. But any rumors on a timeframe?
My new UK Touch Pro (radio ver 1.02.25.19) is exhibiting this same behavior on AT&T... I have tried all combinations of those dropdowns under phone options without any luck. It does seem very strange that HTC put the US 3G bands in the band dropdown, but included radio software that doesn't support it...
... Why would HTC bother removing hardware supported bands in the software?
shaunco said:
My new UK Touch Pro (radio ver 1.02.25.19) is exhibiting this same behavior on AT&T... I have tried all combinations of those dropdowns under phone options without any luck. It does seem very strange that HTC put the US 3G bands in the band dropdown, but included radio software that doesn't support it...
... Why would HTC bother removing hardware supported bands in the software?
Click to expand...
Click to collapse
Because they couldn't get it working well enough in time for the release date, I guess. Similar to what appears to have been the case with the Diamond. The US isn't their main concern at the moment, so delaying a US-compatible version for now in or der to get it to the rest of the world on time.
Either that or it's deliberate act to slow down the grey imports until they do a proper US release in hand with the local carriers.
If AT&T doesn't want to subsidize the Pro/Diamond, HTC doesn't really have to worry about putting in 1900 support. And honestly, AT&T is too busy with the iPhone 3G to care about HTC.
On the other hand, I'm sure HTC is very interested in getting in on T-mo 3G (1700/2100). By downplaying 1900 (which is being eaten up by the iPhone, anyway), HTC can gear up for the fresh 1700/2100 band. Paired with Android, HTC could potentially gain a big chunk of US 3G networks.
I'm a touch pro user in Canada on the Rogers network. I too hope that HTC releases a radio that allows 3g network access. I don't think its a hardware limitation because it wouldn't really make sense to make two versions of the same phone just to disable parts of the radio.
I disagree with the statement that AT&T is too busy with the iPhone 3G to care about the Touch Pro. The fact is that the target audience for the two phones are entirely different and that a considerable amount of AT&T corporate customers still require their employees to use PPC based phones (even if the iPhone 3G supports email push).
Corporate standards don't usually move as quickly as they should, so of course AT&T is interested in extracting more money from customers that purchased a Tilt over the past 8 months and want to upgrade, but are not allowed to use an iPhone.
If HTC removed support because they were unable to get the software functioning properly, I can live with that. EDGE for a few months while HTC readies a new radio software package is fine... EDGE while HTC readies new hardware is not.
fhsieh said:
If AT&T doesn't want to subsidize the Pro/Diamond, HTC doesn't really have to worry about putting in 1900 support. And honestly, AT&T is too busy with the iPhone 3G to care about HTC.
Click to expand...
Click to collapse
If AT&T weren't interesting in pushing the Touch Pro, HTC wouldn't have went to the trouble and expense of making a specific hardware revision (PTT button) for them. That's not something HTC are gonna do just for the hell of it on a quiet Sunday afternoon.
Maybe I didn't read the thread well enough but did you try and flash the AT&T ROM that was posted? Maybe that might work!
Hi,
Recently i have aquired and HTC Hero.
While i was reading posts here at xda, i encountered people talking about GSM and CDMA, where i got really confused.
I've searched google to answer my questions and only i could find was Sprint version and Europian vertion, plus got more confused.
Here is the link of the Hero i have:
http://www.phonehouse.pt/DetalheProduto.aspx?pid=2054
What are the deferences about those two Hero's?
What vertion do i have?
if you put a simcard in it it is GSM, if not it is CDMA. the picture you linked is AFAIK a gms hero, not sure whether you can tell it for sure just by looking at it. GSM and CDMA are different mobile network technologies, to make it short GSM is europe CDMA is usa.
With the hero its quite easy though, the CDMA version looks different to the GSM.
But phones normally look the same.
Pretty sure you have a GSM Hero. That looks to be a European site (selling in Euros) - is it Portugal? All European Heros are GSM. The CDMA ones are for the Sprint network in the USA. The main difference is that they use different mobile phone technology. And the GSM one has a SIM card the CDMA one does not.
As stated above; I'm getting the Rogers HTC One, but I'm not sure which forum I should be following.
With my SGSIII it was simple, Rogers was listed with the AT&T version, and the international version is quite different from the North American, but the One doesn't really seem different between the regions. My biggest concern is the ROMs, want to make sure I'm getting the right ROM for my device.
Thanks
T-Mobile, ATT, Rogers and all GSM carriers are the same as the international version. You can follow either thread you want
Only difference is radio bands
Sent from my HTC One using Tapatalk 2
This question is maybe dumb, but I heard the Sprint version of the device actually works great on AT&T, so, may I ask if it's possible make it happens vice-versa and how to do it if possible?
Simply put no. The reason the sprint version works is due to the included sim slot. GSM devices are not compatible with the old CDMA network.
Bat cave One
I always used to think Sprint & Verizon were similar style carriers.. then AT&T & T-Mobile were as well.. so those were the respective carriers one another could be unlocked for..
Maybe that was never the case.. but now I find the whole unlocking thing confusing.. thought it used to be CDMA stays on CDMA .. GSM stays on GSM..
While I can't answer your question directly, I can give some info, You used to be correct, Carriers like Sprint and Verizon used to only put CDMA Radios/Chipsets in their phones. Then came what they called "world phones" I believe on Sprint, which was a CDMA device that also had a GSM radio/sim slot encase you traveled outside the US. As these got more popular, more manufacturers rather then build two separate devices, would build one and software lock the GSM radio as requested by Sprint (I am guessing). Hope this helps a bit.