Related
Hello,
I've got my TyTN in europe (ROM 1.18.256.104) and my "usb" car charger is not working (charge sometime but ONLY if my TyTn is switched off....not usefull for GPS...)
I've tried another one same problem...restested with my 9100 : ok .
Is it due to the charging load ???
Anyone experiencing the same problem ???
Cheers
André
If I remember correctly the 9100 used an 800mA charger and the TyTn uses a 1A charger. That could be your problem.
hello,
same problem, but charging work on laptop (normally laptop is unable to offer more than 500ma).
I've read an article with C500 where charging work when pin 4 of the usb cable was linked with gnd. Is the same problem with Tytn ?
cheers
Tom
yep, had the same problem too with a standard charger with usb cable.
the charger output was 500mA. it stopped charging after a few seconds.
Recently i bought a Brodit carholder with the charger included. This charger has 1000mA output and its charging without problems.
So you need at least a 1000mA(1A) charger, otherwise it will not work well.
yep, had the same problem too with a standard charger with usb cable.
the charger output was 500mA. it stopped charging after a few seconds.
Recently i bought a Brodit carholder with the charger included. This charger has 1000mA output and its charging without problems.
So you need at least a 1000mA(1A) charger, otherwise it will not work well.
Thanks Luminus for the Reply, But are you sure there is no electronic part added on this car charger ? :?
Strange enough, both my car charger and USB Mains adapter (1A output) (which I was using for O2 Mini and Dopod 818Pro without any problem) was charging fine on my Dopod 838Pro, but the unit had a problem and I was given a new unit. This unit now does not work with my car charger nor the USB Mains adapter.
Looks like a trip down to the service centre again!
it was a cigarettelighterplug adaper with a usb output, with a regular usb/miniusb cable. the adapter was 500mA.( input 12V/output/5V)
it was a complete kit. you could use it for anything you want.
I only attached the TyTN to this adapter.
the adapter couldn't hold it, the amps exceeded the 500mA and stopped loading. the adapter still works on other devices.
the brodit has the same type of adapter, only with a fixed cable on it and 1000mA. this works perfect.
thats why i think that you need a 1000mA one to get it charging.
Hello,
Perhaps true perhaps not...
I used an official Qtek charger -> 1A ..it work
But not sure that due to the 1A because tried to use a self powered USB Hub and it work too ... I will check the official Qtek car charger (if nothing specific)
I use several chargers. i notice that sometimes, if a charger will only charge the device when switched off, i soft reset the device and then it will charge when on. strange problem. the problem of not charging when on, also occurs with chargers that for sure have over 1 amp.
Same problem here......tried to use the mini usb charger I got with my Leadtek BT GPS mouse......
Sometimes it will charge.....sometimes not....
Problem seems to occur when I switch the device on....ie receiving a phonecall or a textmessage....
It then stops charging only to resume after the phone goes back into stby mode....
Weird.....
Danny.
I have the same problem. I have HTC TyTN and 1A car lighter charger with normal USB cable.
Charging from normal, regular charger works. Charging from computer's USB works. Charging from car adapter works only sometimes.
I've tested about ten different car chargers, including one 2A - still nothing.
I've done factory reset of TyTN - after reset it was working for two days.
I have installed only few essential for me programs and no tweaks.
Cable is tested and working.
It makes no difference if I connect device turned on or off. It makes no difference if I reset device connected.
I have no more ideas...
I kept having the same problem but I think I've solved it.
I went into a T-Mobile shop and bought the 'official' car charger for T-Mobile SDA/MDA and I haven't had the problem since.
I've no idea what it's current rating is, because it has no relevant markings on, but it does get pretty warm in use!
help
I am really confused.
I have the sync wire that came with my device. It has stopped working as a charger from the laptop and I can;t active sync. I can however, de-activate the usb link and use the cable to activate my phone as a modem for the pc, so in theory it works at some level.
I also have another lead which is a compact one and it is giving me the same problem.
Both worked until this week so it isn't a case of them not being compatable.
Any ideas. I depserately need to sync. I can charge from the plug so thats no problem.
ahh
I have repaired actve sync and it seems to be ok now. I have no idea what happened.
1. Turn off your hermes.
2. Plug car charger to hermes.
3. Turn hermes on. Phone is now charging.
This works everytime for me.
Place this on sticky?
My hermes charges off a el-cheapo USB charger I bought for my Orange C500 years ago... without turning on/off
Lucky you. But to many of us, our hermes do not charge but the way I describe, works for me on all those cooked Rom.
Hm. I just plug mine in too, and it has a cooked ROM....
this works for me on AC charger. Also sometimes works after going into and out of standby a few times.
same here. i just plug mine and im good to go..
Ditto. I think you might have a problem with your charger or phone.
hi guys,
don't know if you've seen it or not, but the car charging problems were explained here:
http://forum.xda-developers.com/showthread.php?t=277742
It's to do with the 4th and 5th pins in the plug of the standard car chargers.
Thanks to PhilipZ and tadzio for figuring it out
They've saved me from the annoyance of constantly having to restart the unit while plugged in.
I PLUg it in then do a soft reset and if u use the speaker phone option u have to do it again i used cooked rom also the phone has a fu_ked problem with the car charger
I've yet to find a USB source that DOESN'T charge my 8525...
Currently used:
USB from PC / Laptop (duh)
USB from Playstation 2 and 3
USB from cable box
USB from HP Printer
USB from iPod adapter
USB from Razr charger
USB from blackberry charger
USB from HTC Charger
USB from Razr Car charger
I think the only USB I haven't tried is on my Nintendo Wii.
Hermes charging from car charger
I have a similar problem with my Arkon, powered car cradle, it charges if the screen is blanked off but if I try and watch my satnav it turns the charger off. I'll try turning off the Hermes before connecting the charger and let you know
I have x01ht, i plug charger on 220V AC to charge my Phone. My phone and battery is very hot( about 40 degree). Then i plug charger on 110V AC to charge my Phone and battery isn't hot. Now i understand why my phone is hot when i plug charger on 220V AC
i have this problem with an ebay car charger, if you dont restart the device before plugging it in it wont work.
ive seen the fix for it just too lazy to change it.
Weird Car Charger Problem
I'm running an i-Mate JasJam with Schaps 3.60a, and after reading all the posts about problems with power output and USB pin configurations, thought I would play it safe and buy the 'official' i-Mate car charger.
However, when I first used the car charger, it wouldn't charge. Then I found that after a soft reset, the charger worked perfectly but as soon as I had synched with my PC, the car charger stopped working again.
My view is that this is a software problem and my workaround has been to use bluetooth for synching, and the USB for charging only. I have been using this configuration for the last few weeks, with no problems either on the mains charger, or in the car.
Cheers
yea same here i just plug in and go
Tip for ALL HTC users as to what car charger to use
st3v3 said:
i have this problem with an ebay car charger, if you dont restart the device before plugging it in it wont work.
Click to expand...
Click to collapse
I found out by accident that there is a modular car charger that works with HTC just fine. The beauty of this charger is that it has a modular design: the plug (body) itself that goes into your car socket (12V) and a standard USB cable that plugs on one end to the body and on the other end - to the phone.
It works without any problems on my T-mobile Dash, Cingular 8525 and HTC Artemis. The other important positive moment - it's just about $5 at the internet stores. For example here: http://www.cell-phone-accessories.com/usb-charger.html
There is no reason why a car charger would not power your Hermes. The Hermes does not recognize the difference between a wall charger and a car charger (there is NO difference).
car charger, Arkon cradle and hermes
Hi, well I can happily report that I can now use my satnav on my hermes, as long as I remember to turn off the device before plugging in the Arkon cradle and car charger, I'm a happy bunny now
Kevbodian said:
There is no reason why a car charger would not power your Hermes. The Hermes does not recognize the difference between a wall charger and a car charger (there is NO difference).
Click to expand...
Click to collapse
Got the same problem. Every so often my jasjam will refuse to charge from the car charger and will need a soft reset. When it gets into that state it will:
Charge from the car charger while the display is OFF
Not charge from a car charger while the display is ON
Charge from a wall charger with the display on OR off
After a soft reset all is back to normal...
So, bought the following cradle from DayDeal's ebay store:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350284094212
The product description says the following:
* Custom-fitted Docking Cradle
* USB connection/charging cable
* AC power adapter
* Stylus
Now the issue is with the second line. What is NOT explained here is that the unit when plugged IN to a wall jack AND the sync charge cable is plugged in to your computer, the sync/charge cable gets no more power from the wall jack and wants to get it from ONLY the sync/charge USB cable. All of this leads to the unit being grossly undercharged and therefore, complains that there is not enough charge coming from the power source and that you need to shut down and therefore the whole idea of a wall charger is useless after this.
WHY would a sync/charge USB cable which by the way is physically attached to the unit and cannot be removed, while the wall jack plugs into a proprietary mini-USB cable. I know it's proprietary because I tried first to use the wall charging cable that came with my TP2 from Sprint.
So, I'd recommend not buying this cradle unless you want to do what I'm doing now, have a USB sync/charge cable dangling from the unit and NOT plugged into the computer, but instead only plug in the wall charger and sync and data transfer via USB which is what I was doing before except now, I have a cradle to do it in.
Not a good trade-off to me. I bought this specifically to be able to sync/charge FROM the cradle.
One last thing, don't think about using the cradle if you have a skin or a hard case on the phone. The connector is so flush with the back of the charging stand that if you try to put anything BUT the phone into the stand it can't connect.
EDIT: December 5, 2009:
Been in touch with the vendor. They are going to swap out this unit for another one. They say that the unit doesn't do this at their site and that this one may be defective. I'll gladly swap this one out for one that works as unstated or at least expected. I'll post when I've gotten the new unit if this is actually a defective first unit or if this is the actual way these units work. And, I'll also try this on multiple machines so that I know it's not just my home desktop.
Another bad cradle from ebay DELUXE CRADLE W/2nd Battery Slot FOR HTC TOUCH PRO 2
When AC plugged in and USB to PC the PC USB sucks the power so the phone charges slow or not at all. Also doenst seem safe for the USB to send the power back out to the PC from the cheapo AC plug in this cradle. When used as a standalone charger AC only it sometimes fails to charge, about a 50-50 success rate. Stay away from it.
That's good info. It is the exact cradle I bought, but i bought it just for charging. I have not used it for connecting to the PC yet, but i needed a cradle that had a slot for a battery in it too.
wpbear said:
Another bad cradle from ebay DELUXE CRADLE W/2nd Battery Slot FOR HTC TOUCH PRO 2
When AC plugged in and USB to PC the PC USB sucks the power so the phone charges slow or not at all. Also doenst seem safe for the USB to send the power back out to the PC from the cheapo AC plug in this cradle. When used as a standalone charger AC only it sometimes fails to charge, about a 50-50 success rate. Stay away from it.
Click to expand...
Click to collapse
That the one I have as well. I also have not use it for my computer.. All I really wanted was a cradle for my nightstand that had an additional battery charging slot as I also bought some of those $10 200mah batteries to try (have not received them yet)
dahauss said:
That the one I have as well. I also have not use it for my computer.. All I really wanted was a cradle for my nightstand that had an additional battery charging slot as I also bought some of those $10 200mah batteries to try (have not received them yet)
Click to expand...
Click to collapse
200mA or 2000mA? Got a link please? Sorry for off topic.
jonrobertd said:
200mA or 2000mA? Got a link please? Sorry for off topic.
Click to expand...
Click to collapse
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390130739877
2000mah
I purchased this cradle and my complaint has to do with the USB cable that is attached to cradle. I need a long line to reach back of my PC. This attached one does not reach unless I want to view the phone from 5' away! Very disappointed. I've only had it a few days but didn't know this, sanjsrik:
What is NOT explained here is that the unit when plugged IN to a wall jack AND the sync charge cable is plugged in to your computer, the sync/charge cable gets no more power from the wall jack and wants to get it from ONLY the sync/charge USB cable."
Click to expand...
Click to collapse
It does seem slow to charge but I'll run a couple of tests to confirm.
Hi everyone, hope someone can advise.
I have a UK TG01 and it works ok but overnight it wont charge from the mains charger but it charges via usb.
I have tried different chargers and an old HTC mini usb charger with a mini to micro adapter fitted but its still the same.
I have the Mugen 1300Mha battery but its the same with the standard battery on all chargers.
I have cleaned out both the charger plug and the socket on my TG01 just in case of dust but no good it only charges via usb.
I have hard reset and flashed the standard UK Orange rom but this makes no difference.
Does anyone know whats going on? it was fine, no changes or software loaded and one day its fine and the next day it wont charge??
Any advice would be gratefully received, thanks for reading.
Faulty USB sockets i think try send it back to Toshiba for warranty repair.
Not sure about that as my TG01 does charge if I plug it into my laptop, this would suggest the socket is ok?
I believe that the charger is faulty, try a new micro usb charger, or try another socket
wafeeq said:
I believe that the charger is faulty, try a new micro usb charger, or try another socket
Click to expand...
Click to collapse
Agreed. As the TG01 is charging via USB, then there is most unlikely to be an issue with the uUSB socket on the phone.
To tell the TG01 to go into charging mode, the uUSB connector on the charger must have the two data pins shorted out. This is the equivalent effect to connecting to a host laptop or PC when connected via a USB sync and charge cable.
If you have a non-standard charger or are using an adapter from eg. mini-USB to uUSB it is very likely that this will not be implemented.
A few questions...
- Are you trying with the supplied Toshiba charger ?
- If so did it work OK with this before but not now ? [likely duff charger]
- If a 3rd part charger, again has it ever worked ? [if not then probably missing the required pin config]
Hope that is of some help.
Hi Kevin, its a genuine Toshiba charger and I have been using it since day one.
I took my charger into work today and tried a friends Nokia micro usb charger and that worked first time so duff charger.
No, I asked him to try my Toshiba charger and that also worked
So I assume my original charger possibly may not be 'shorting' correctly or presenting exactly the right resistance to the TG01 or possibly my TG01 is getting a little fussy about how it charges.
Anyway I have ordered a genuine Nokia charger from ebay and fingers crossed all should be well and thanks for all the advice everyone.
my Lumia charges fine with USB supplied adaptop and my laptop but not my car USB? my android used to..any ideas?
maybe your car charger cable doesnt fit snug into the phone
I use the same USB cable supplied..it fits fine to the Car USB port, I have used same Nokia cable to charge my samsung and it works
anyone tried this?
Check this link:
http://wmpoweruser.com/test-shows-n...rges-lumia-800-twice-as-fast-as-generic-ones/
some usb car chargers do not supply enough amperage to charge the phone.. my mate had to buy a special usb car adapter 3W in order to charge his iphone from the car.. some android phones do not use as much power as the lumia