not sure here. i think it just started. wakes up like a text message is going to occur, or maybe an incomin phone call, but then nothin happens, and it eventually cuts back off by default.
i also notice something that keeps comin back when i end it, and i don't know if i put it there to begin with.
it's like ceObSvr .. it's always running, and if i kill it, it will likely come back. anything?
i know i tried searching but that doesn't apear to for some people.. just doesn't
Cheers!
edit:
NATF v4.6s, lumos, it's a fuze, radio leaked 25.19, that's it i think
My CDMA Touch Pro wakes up time to time due to low signal strength. I'm not sure if it is only limited to CDMA, so try turning radio off for a while.
wdkingery said:
not sure here. i think it just started. wakes up like a text message is going to occur, or maybe an incomin phone call, but then nothin happens, and it eventually cuts back off by default.
i also notice something that keeps comin back when i end it, and i don't know if i put it there to begin with.
it's like ceObSvr .. it's always running, and if i kill it, it will likely come back. anything?
i know i tried searching but that doesn't apear to for some people.. just doesn't
Cheers!
edit:
NATF v4.6s, lumos, it's a fuze, radio leaked 25.19, that's it i think
Click to expand...
Click to collapse
Dear Wdkingery,
Are you using Bluesoleil Bluetooth on you pc/laptop ? have you installed IVT-wm(1.0.2) on your mobile device?
if yes !
then CeObSvr is a programe that is used by IVT Blusoleil Software to transfer data from your mobile to pc/laptop & pc to mobile.
you can remove this file from mobile by going to settings - system and remove programs. *don't remove if you are using bluetooth with your pc for exchanging data.
Best Regards
Kip
Related
Does anyone know a way to know if an sms has indeed been sent away? some Sms's just don't arrive and there is no notice to confirm the fact that it was sent off.
Lionel,
Pocket PC 2003 solves this. It displays a little message bubble when a message has been successfully sent.
I have seen that in Pocket PC 2002, if I write and send a message and turn off the display before the message leaves my phone, it will never go. But it will give you the error messge when you go back into your SMS's.
Regards
Keith Burke
Dublin, Ireland
many thanks, so I guess I'll have to get pcc 2003!
greetings,
Lionel
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Hi Ranger,
Can I be sure everything will work all right by upgrading to 4.00.10? I read quite some comments about a series of problems and some people going back to previous versions. Isn't it going to bust up my phone settings in Belgium? Someone wrote not to do any upgrades unless your an expert technician.
2. If I do go on with the upgrade can I just use sd-backup and get my stuff back from Sd-card? Isn't that going to restore my old system?
3. I don't know anything about technics. Most of the options on http://cuba.calyx.nl/~jsummers/ROMkitchen/ sound like Chinese to me.
Sorry for all the dumb questions, but I want to make sure I'm not going to run into trouble.
Hi Ranger,
I decided to run the risk anyway. I can probably do a hard reset and backup if I get into deep trouble.
I went to your link, but as I am a complete beginner at this, I got stuck after 'building the rom now'! I asked for the 'Installer.exe' but couldn't find it on my pc. What shoud I do?
greetings,
Lionel
Ok, first off. Back up your XDA ROM to your SD card. I've never done this, but I'm sure once this is done you can copy it to your desk top.
Secondly, yes there is a possability that it will kill your phone. See http://www.xda-developers.com/forum/viewtopic.php?t=1624
But I have never had a problem, once I stick to my golden rule. Close EVERY PROGRAM that you possibly can while doing the upgrade. And son't touch your computer while it is doing it as well. It's a tiny price to pay. If you're using USB it shouldn't take more than 5 minutes. With Serial cable, I heard it can take upto 20 minutes, maybe more.
As far as downloading it, after you've selected the options in the ROM kitchen [whici belongs to Jeff Summers by the way, not me ] make sure that the bar up the top is still green, NOT RED.
Next, down the bottom there are three options. For yourself, choose the EXE file. After a few seconds, might take upto 30 seconds, up the top of the screen will be a button to down load your file. Just save it somewhere on your computer and run it.
Make sure that your phone is in it's cradle which should be conntected to your computer [or connect the phone to the computer with a serial or usb cable]. Also make sure that the power cable is plugged in.
I think some people have advised taking out your SIM card but i never have.
That should be it.
Let me know either way. If it messes up, just pray that it's after 5% or 10%, so I hear. If so we can try the second option.
Regards
Keith Burke
Dublin, Ireland
One last thing. Take a note of your Network provider settings [GPRS etc...] before you upgrade. They will not be in the new 2003 image.
I forgot when I was doing mine and no longer have my GPRS settings
Hi Keith,
I'm trying it out right away. I have the backup on the sd-card, so that should work fine.
Just be careful with your SD card. I have heard a few reports that it sometimes gets erased in the PDA. Can't remember when or where but if you search the forum you might find it.
Good Luck. It's worth it.
if all you need are sms delivery reports, just click on options when in the compose sms screen and then click on delivery reports, unfortunately you have to do this for every sms as there doesnt seem to be a way to switch it on permanently.
ranger said:
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Click to expand...
Click to collapse
Does this have a radio update ?
Regards
René
Hi,
I've been trying to cook about 20 times since the 1. of August. Tried about everything. Tried all the roms, with and without adding software. Turning off my firewall. Trying all the Rom's. No other programs running.
This is what happens every time:
After selecting the items, I choose the 'install.exe' option and choose 'build rom now'. It starts doing 'something'. I have ADSL and after about 10 seconds the blue bar at the bottom is completed. At the top of the window in the yellow background it keeps saying
'Creating rom... Please be patient
copying rom Files
running mkrom
even after waiting for 30 minutes nothing more happens.
What am I doing wrong?
greetings,
Lionel
Radio Upgrade
@rk
No.
There's no Radio Stack Unit (RSU) Upgrade integrated.
As it depends on the location, where you live, be carefull, which you choose.
For me living in (good ol') Europe the RSU 4.21.00 from O2 UK webside is working.
My native language is Greek and naturally I send Greek sms.
The only problem is that XDA sends them using Unicode character set meaning that over 70 character messages will be splitted.
Does anybody know of any solution on this issue?
I have an O2 payg sim card, even though I ask for delivery reports on sms each time I dont get them, reason being the remaining balance comes in as an sms which cancels the process somehow. Has anybody got a solution to this?
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
ukneil said:
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
Click to expand...
Click to collapse
Thank you very much, that worked a treat, I was told by somebody to put that *0# before the fone number, no wonder it didnt work, thanks again.
Hi sorry if this has been posted before, I couldn't find any relevant info on the boards...
The problem is with the phone app. Once the device has been used to make a telephone call, the phone app stays running and will not end (i'm using the switcher) unless I perform a soft reset with the stylus.
If I make say three phone calls I end up with 3 instances of the phone app running and not being able to end them?
Any Ideas?
Thanks
Dean
Do you really end up with three copies running, or are you speculating? That would be very strange. It is normal for it to remain running, but I've never seen more than one copy running. There is no way to close it, even with a task switcher (have tried three).
If i am not mistaken your using WM2003 4.00.05
If this is the case it happened to me on hourly basis so i downgraded to 4.00.01 & it works well.
I think its a bug and sometime you see the call meter still running but the actuall call has ended more u cant stop it but by soft resetting.
If ure using this version of WM2003 then your only soltion change the ROM version
:wink:
I have had my TMo xda for almost a year now, and have used every version of PPC2002 and WM2003 to date, and in every version I have noticed that you cannot close the phone app as well, but I have never noticed multiple instances simultaneously, except that the call log window does sometimes show as an additional instance. So to see two instances of the phone app running is not unusual. I have never seen more than two instances running though, and closing the call log does seem to close the second instance.
David
thanks for the replies...
You are correct about there being only 2 instances of the phone app running, there are never more than that.
i'm using the developers rom v1.1 r 4.21.00
The phone instances simply wont end using either the task manager or switcher. The phone shows the last number I dialed, which I can't get rid of. also to the left of the contact name just above the phones erase button, there is a little "m".?
I have the developers rom 1.2 and I can close the phone app ok, I just go to the switchers "lightening bolt" thing in the right hand top corner, click, click and its gone.
The "m" you see is the confirmation that you are calling the number which appears in the 'Mobile field of the contact record. The last number called cannot be removed without 3rd party software. Nothing to worry about and probably not worth fixing.
Um, you know you can turn the phone app off by tapping on the signal strength meter or pressing and holding the red ph button ?
Hi, yes I did know you could turn the phone of this way, but the phone wouldn't actually end.
Last night I upgraded to the v1.2 rom, problem had dissapeared. Thanks for your help.
EDIT:
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
That post fixed my problem, as well as fixed the problem which the data connection turns off after a call.
Hey guys, sup?
I have a huge problem with my TELUS Touch Pro. Great phone, but just one problem...
Whenever somebody calls me, I can't answer the phone. The onscreen "Answer" button doesn't work, the Talk button doesn't work, pressing the Select button doesn't work...pressing the headphone button does, but sometimes my headphones are in my pocket, or sometimes they're not with me at all!
The only way I can answer them is by ignoring the call, and calling them back. It sucks big time.
Anybody have a solution? And no, I'm not hard-resetting my phone. It started doing this for my first call, so I'm pretty sure it's not my fault.
HEEAAALLLPPP!!!
Is this the stock ROM?
Do you have BT on and connected?
Mine started doing that yesterday. I did a hard reset and so far everythings back to normal. Still do not know what it was tho
I just had my TP replaced and the new one did the same thing, I did not notice until a few days later as I use a bluetooth headset and pushing the answer key on the headset worked. I had to RTN the device to make it work properly. Have not had a problem since. it has been aabout a week and a half.
Sometimes I've noticed this happens when my memory is tied up elsewhere, ie media player or something. Try soft resetting your phone every morning that might help clear it up.
I have had this happen with me on my Titan which I recently traded in for my Touch Pro, and also on my Touch Pro. I noticed it coincided with installing iGo8 GPS software on both. A hard reset was the only way I found to fix it. Uninstalling the software did not do the trick. I could be wrong about the software title I am blaming, but I have everything reloaded on my phone except that, and all is well. I do have a Slide To Answer incoming call screen now with the MightyRom 4.9.5 rom installed, maybe this is a work around, don't know for sure. If anyone else has more feedback, let me know. I would love to find a fix for it so I can use my GPS software.
Mine started doing this crap last night. I reinstalled the S2A cab and just let it go.
I am starting to think it might just be the telus network being a boatload of suck. Mine does it with the stock rom without any programs loaded from time to time. I am thinking it must be the tower failing to acknowledge that you want to answer the call, so the phone keeps ringing becuase it sees there is an incoming call but the tower ignores that you are trying to answer it. This is just my guess based on what I have read about CDMA, I wonder if any GSM users have the same issue.....
Do any of you have Advanced Configuration installed? This is what caused this problem for mine and my brother's TP. Uninstalling didn't fix it. Had to hard reset.
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
earthtodigi said:
Yes, this is a known issue with Advanced Config, perhaps some other apps as well. Try this fix.
http://forum.ppcgeeks.com/showthread.php?t=40427
Click to expand...
Click to collapse
I can tell you that this will more than likely fix this for you. Mine was doing the same thing, applied this, done and shut! Good luck.
OMG OMG OMG thanks!!!! That also fixed the problem where it ended the data connection after the call.
Sorry I took so long, I THOUGHT I was subscribed to the thread...
Thanks again!
i just notticed today that wheni call my voicemail none of the phone onscreen buttons work
keypad,end call, speaker etc are all non functional. i have to press the hardware key to end call.
im using CHT EDITOR with stock TMO rom
could be 2 things related to MinimumTapTime for screen sensitivity:
1. Do you have BSBtweak installed? DO NOT change the MinTapTime setting. Revert it.
2. Did you do tweak#44 MinTapTime from SBOY2000's HD2 tweaks thread? change that value back to what it was.
didnt tweak anything ust used bsb tweaks and changed it back to normal
still same.
at the moment i cant even get to the phone screen
the phone is completely fn cracked out.
im seriously on losing my patience with this sht, 3 phones cant be all having same issues thats just impossible unless the OS is ****.
yesterday i installed the WCX ILLUMINATI SERIES HD2 EURO/TMOUS 21911 2017
rom and it worked fine
call screen worked and keypad as well
i installed the BSB tweaks and cookie tab home
and getting same thing now the whole call screen is inactive
cant even push the hardware end button to end the call
and an error popped out:
a problem has occured with cprog.exe
the phone is very buggy in general with the cookie tab and bsbtweaks
ok so i just tested with both of them setup separately and both of them make my phone screen go stupid.
with bsb tweaks it doesnt turn on at all
with cookie tab it calls but then none of the buttons work on it not even hardware end call...
god damn i hate this phone, less than a week i own it and im about to throw it at the wall.
is anything supposed to work with microsoft at all?
wtf is active about active sync? it takes 50 tries to get one connection
sorry for the language but this is relaly fn frustrating.
fuzzysig said:
didnt tweak anything ust used bsb tweaks and changed it back to normal still same... 3 phones cant be all having same issues
Click to expand...
Click to collapse
fuzzysig said:
i installed the BSB tweaks and cookie tab home ...
and getting same thing now the whole call screen is inactive ...
Click to expand...
Click to collapse
fuzzysig said:
...with bsb tweaks it doesnt turn on at all...
Click to expand...
Click to collapse
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
You returned the phone twice because you keep installing an incompatible program and getting an error????????? Then why do you keep installing that program??????????? You're giving WindowsMobile users a bad name.
*HINT 1:Check what date BSBTWEAK was made. IT IS NOT MADE FOR THE TMO USA HD2! If somehow you feel you must use it, DO NOT FIDDLE WITH THE "TAP TIME" SETTING WITHIN BSBTWEAK.
*HINT 2: DISABLE COokie's Home Tab Lockscreen, it causes more trouble than it's worth.
Quote from the BSBtreak thread:
heybhouse said:
Edwin320 said:
Hello all! ...
I installed BsB onto my phone and it worked fine. I installed it on my wife's phone, and altering the Tap Time resulted in her screen not responding to the icons (speaker phone, hold, etc) while in a call. My phone did not have that problem. I did a hard reset and reinstalled everything except BsB and her phone is now fine ...
Click to expand...
Click to collapse
"in case this helps anyone: one of the tweaks would free my phone when in a call (not the whole phone, just the phone screen) so i couldn't bring up a the keypad or go to speakerphone, etc. I figured out it was the "tap time" tweak. i'm using the usa t-mobile hd2." (pg. 117) haven't seen the menu issue but if you have it backed up might as well save time and do the hard reset. i wonder if chainfire might be the issue there.
Click to expand...
Click to collapse
why doesnt it say anything about beeing incompatible in BSBtweaks post by the author himself?
aaaaaaaaaaaaaaaaaaaaaa back at you...
dude please dont help me anymore you really suck at it
THIS>>>>>>>"DO NOT CHANGE THAT BSBTWEAK SETTING!!!!!!!!"
DOES NOT HAVE SAME MEANING AS
THIS>>> DO NOT INSTALL BSBTWEAK!!!!!!!!!!!!!!!!!!
thats if you didnt understand
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
stlfx said:
Had the same problem, in BsBTweak turn off "Phone Slide Cover".
Click to expand...
Click to collapse
I hope this helps someone else.
The OP doesn't take suggestions well. He just comes on here to vent about how he can't make his phone work.
Sorry if this is in a post already, I searched but didn't find anything the same.
I use the stock android messing setup, and on 1.6, when I sent a message with little service, I could leave it and it would keep trying till it sent. Now on 2.1, I find that if service is an issue, it will notify me right away that it didn't go through, and I'll need to hit resend. Any way to change this to the old way, so I don't have to keep bothering with it?
Thanks
Sent from my X10a using XDA App
No one else has this happening?
I've had this happen and had to manually resend the message. Not sure if there is a solution to it
I've had this happen too. Doesn't bother me too much, I just hard press the message and resend it again. My issue is the darned the new way to add recipients. I can't just type their names and the phone automatically recognizes them like with the old firmware. Annoying when I have to send multiple texts.
true say .
Im having this issue as well. And started a similar thread. Shouldnt have now that I found this one Lol...
But did not find solution thus far. But I noticed the phone always goes into H from 3G. I think this could have something to do with it because I know the phone sends them when in H mode rather than 3G.
That or I am just paranoid.
Hmm I have a different problem, whenever i come down to 20 characters left in the SMS, it starts lagging really bad, and sometimes it just closes :S