I purchased a Taiwanese Iolite (T4242), comes with Chinese version.
I used the QMAT to Change the CID to SperCID and than Just flashed it with :
_file_RUU_Iolite_HTC_Europe_1.09.401.3_Radio_Sign_12.41.30.16_0.41.30.12_Ship.exe
IT WORKS FLOWSLY... and my device is now WWE.
How to do it:
I just followed the instructions on the http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard&action=BackLinks:
• Download QMAT and MTTY from http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
o The latest copy of QMAT is also found http://revskills.de/pages/download.html
• A spare microSD card
• Optional: a card reader
Format your memory card for FAT32
• If you have a card reader, go to DOS and type:
format <volume> /FS:FAT32 /A:4096
where <volume> specifies the drive letter of the SD card. For example: format d: /FS:FAT32 /A:4096
Run QMAT to create the Gold Card
1. Put the newly-formatted SD card in the working WM device and connect to ActiveSync
2. Run QMAT, go to the Hardware Forensics menu, and then select "Generate HTC Goldcard"
3. Select your device's key (Iolite)
4. Get the SD Card Serial from WINCE Device
5. Save the Gold Card image to the SD Card
6. Put the SD card in your device and put it into bootloader mode (hold down the VolumeDown button and press the reset button).
7. Now you have a card which gives you SuperCID.
8. With the card inserted into the Iolite, which is in bootloader mode, connect the Iolite via USB to ActiveSync.
9. From your PC, run the RomUpdateUtility.exe from the RUU folder containing the WWE shipped ROM
It should start flashing if everything is configured properly!
Good Luck
Thank you for your info but the steps are hard to follow, admire your patience!
I flashed mine without making a GoldCard to unlock my Iolite. Mine was in CHS and after flashing become Europe WWE. I am looking for an Asia WWE. There is one in the forum but it can't be flash and I don't know whether it is because it is RUU .... _Test.exe and not ... _Ship.exe
Maybe the GoldCard unlock method will work and not sure it is worthwhile to try.
In fact it is very easy.... if you read it carefully you see that it is just connect your device with a formated sd and than reboot it to boot loader...
The next is flash with any ship rom.
Seems that your country id matched the rom you flashed.. however you will not be able to flash any-rom.
As it seems to me many users are stucked with rom flashing .. Hard SPL has not been around yet.. so this is a nice solution and once again - very easy!!!
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
You have to purchase a license.
domestik said:
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
Click to expand...
Click to collapse
Yes you are right. I did purchase a license. Trojan??? please explain.
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
MTTY check-up
domestik said:
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
Click to expand...
Click to collapse
Mmm.... in fact, I did copy the entire directions of "Howto", however I did not even use the MTTY.. pay attention that in my notes, I ignored checking of SuperId setup. The Mtty is required just to check that you have a superid before flashing. It is not required (I think so...) with this machine... it wull not flash if the SuperId did not load.... so just to make it simple : connect the machine, setup the SD card and flash ..... easy no?
I will not load the MTTY from Rapidshare I trust that you checked it and since it is not required... I suggest that you eliminate this step.
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Need to use the written SD each time...
koalaii said:
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Click to expand...
Click to collapse
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
borce_razor said:
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
Click to expand...
Click to collapse
Yes. Success with Jade, HD and Iolite WWE to RUS
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Where supercid down!!!!! Buildor, making a link! Thank you!
Galaida, can you try to explain what have you done and what did not work for you? perhaps we can help to resolve the issue?
Should work.... please include in your answer the name of the rom you tried to flash and error messages that you received while in process of the Gold Card.
Link to QMAT
LITANG said:
Where supercid down!!!!! Buildor, making a link! Thank you!
Click to expand...
Click to collapse
I am not sure if this was requested... however here is the link to the "home" of the utility:http://revskills.de/pages/download.html
I suggest thta you get it from this site, as other users already reported RapidShare and other may have a Trojan as well.
QMAT
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Galaida said:
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Click to expand...
Click to collapse
try typing "boot"
avocaz said:
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Click to expand...
Click to collapse
Can anyone offer me some insight please?
avocaz said:
Can anyone offer me some insight please?
Click to expand...
Click to collapse
I can help, PM me
Unregistered QMAT cannot create GoldCard for Iolite.
Dubi said:
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
Click to expand...
Click to collapse
Dubi, wait a minute, do you have a registered QMAT or an unregistered version?
As one of the forum member commented, it will take 20 Euros, (more than $30) to register QMAT in order to make a GoldCard with the method you mentioned.
Can you confirm that?
Regards,
Related
Im write small programm to unlock and unhide extended rom partition on Gene.
DO NOT USE IT ON OTHER DEVICES
USE IT ON OWN RISK
Copy programm on your Gene and run it.
After the message on success reboot your device.
You will have folder Extended_Rom2 in which it is possible to copy
files and which will be will remain at hard reset.
Total space in ExtRom - 10 MB.
hoho，thank U!
Good Job, trying it now
Thanks a lot
1st of all
thanks for posting the file
any one has successfully installed the file?
yes，it's work.
WOW
Thanks For The Files! It Works On My Dopod D600
Keep The Good Works Coming!
:d
And what can I do with Ext ROm? if i delete some .. will it disappear forever?
how cound i lock it again?
it doesn't work for me
I'd try to run it on my GENE, dopod D600, official from China Mobile.
and it didn't work.
ROM version: 1.2.706.10 CHS
ROM date: 11/30/06
Radio version: 02.71.90
Protocol version: 4.1.13.31
check that exist registry keys:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ondisk2]
"bootphase"=dword:00000002
"DriverPath"="\Drivers\Builtin\ONDisk2"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ONDisk2]
"MountHidden"=dword:00000000
orefkov said:
check that exist registry keys:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ondisk2]
"bootphase"=dword:00000002
"DriverPath"="\Drivers\Builtin\ONDisk2"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ONDisk2]
"MountHidden"=dword:00000000
Click to expand...
Click to collapse
within my GENE, there is no such key:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ondisk2]
the other key exists, the attribute value is:
"MountHidden"=dword:00000001
what should I do?
create this keys
Thanks for this.. but unfortunately running it made my 4gb sd card renamed from Storage Card to Storage Card2
so all my links are now broken
ElectroV said:
Thanks for this.. but unfortunately running it made my 4gb sd card renamed from Storage Card to Storage Card2
so all my links are now broken
Click to expand...
Click to collapse
Got the same thing. Had to hard reset.
it doesn't work on my D600.
Vukile said:
Got the same thing. Had to hard reset.
Click to expand...
Click to collapse
How do you hard reset??
HTC P3400
Hi everybody!
I've got a HTC P3400 and i need to unlock the SIM card.
Could anyone help me?
I've been searching at this forum but i cant understand how must i do it.
Many tanx
Ghitaj from Earth
Unlock p3401
Tried and nothing happened to my course P3401 BR. Instaley gave Message unlock ok, more to resume remained locked.
I found this topic here:
http://forum.xda-developers.com/showthread.php?t=451991
Thanks to all.
Hey, this worked. I got Z_Card as the name of the new drive. As i am using my custom ROM with 4 MB of extrom, thats what i got but still its great!
ElectroV said:
How do you hard reset??
Click to expand...
Click to collapse
Turn off your Gene
Hold both the softkeys and press the power button. Do not let go of the softkeys until you see a text prompt that says everything will be deleted, now get rid of the softkeys and press the call button.
@oreklov:
Thanks a million. Worked for me, like krazy got a Z card. The box which appeared, though had "Error" in title bar . But the content of the box was "Successful" and hey it was .
Thanks buddy
ghitaj said:
Hi everybody!
I've got a HTC P3400 and i need to unlock the SIM card.
Could anyone help me?
I've been searching at this forum but i cant understand how must i do it.
Many tanx
Ghitaj from Earth
Click to expand...
Click to collapse
Contact jockyw2001 through PM. But do understand that he charges for it. Its not a free service. You send him what he wants, he gives you a quotation, you submit the money and get your code. This is not some sort of duping, this guy is genuine.
So, if you got the bucks, go ahead.
Hi All,
My CHT9000 can only access tri colour after upgrading failure right now.
Before upgrading to Hard-SPL-V7, already verified that the HTC_boot is 0180 and already grabbed supercid. However after clicking "upgrade" button, it displayed "connection error [260]" after a couple of minutes.Currently I can only access to tri colour interface with following information:
IPL is :IPL-1.01
SPL is :SPL-1.40.OLIPRO
Tried another laptop and alternative USB connection cable, still same.
Any thoughts and inputs will be appreciate.
Try flashing with a shipped/original ROM and see.
Regards,
Carty..
Thanks Carty for your reply.
I searched and got following instructions from the forum. A little bit confusion of step6 .Since I can only access to tri-color screen. How can I run sspl-hrm.exe on the phone?
Thanks in advance.
1. download hardspl v7 from the first post.
2. extract ruu_signed.nbh and rename it to HERMIMG.nbh
3. copy it to a microsd card, make sure the card is formatted as fat32
4. download sspl-herm from here
5. extract SSPL-HERM.exe and copy it to your phone.
6. insert sd card and run sspl-herm.exe on the phone.
7. you should see the tri-color screen and then it should change to this
8. press power button to start flashing
9. reset when you get the msg that its done.
Hi phoebe0616,
before you try all that stuff, please check this first:
1. Grab the tool mtty and put it on your host
2. disconnect active sync and disable all active sync connections
3. connect your device to host and open up mtty using usb connection
4. type enter once, now you are in the bootloader console
5. type: set 14 0
6. reboot
7. if you're still in bootloader after, repeat steps 3..6 but type another command: set 16 0
8. Read the wiki!!!
Regards,
scholbert
Appreciate your help, Scholbert
Will let you know the result later.
scholbert said:
Hi phoebe0616,
before you try all that stuff, please check this first:
1. Grab the tool mtty and put it on your host
2. disconnect active sync and disable all active sync connections
3. connect your device to host and open up mtty using usb connection
4. type enter once, now you are in the bootloader console
5. type: set 14 0
6. reboot
7. if you're still in bootloader after, repeat steps 3..6 but type another command: set 16 0
8. Read the wiki!!!
Regards,
scholbert
Click to expand...
Click to collapse
Although "set 14 0" didn't resolve it, "set 16 0" made it.
Thanks all.
Unfortunately, I have an additional issue right now. After reading following article carefully. I renamed "RUU_signed.nbh" in Hard-SPL-V7 to "HERMIMG.nbh" and did exactly as the description in the article.I was able to get the confirmation that the upgrade is complete. However after softreset, it looks nothing changed, "SPL-2.10.OLIPRO" is supposed to be displayed instead of "SPL-1.40.OLIPRO". Another quite weird thing is whole flashing process took no more than 5 seconds.
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Any ideas?
Thanks in advance.
Hey phoebe0616,
that's really weird:
You just updated the bootloader successfully from "SPL-1.40.OLIPRO" to "SPL-2.10.OLIPRO" using the SD-card method...
Funny guy
Take a look at the filesize of this small part of software, that's why it took only 5 sec., that's totally normal
I think everything is fine with your device now, isn't it?
scholbert
scholbert said:
Hey phoebe0616,
that's really weird:
You just updated the bootloader successfully from "SPL-1.40.OLIPRO" to "SPL-2.10.OLIPRO" using the SD-card method...
Funny guy
Take a look at the filesize of this small part of software, that's why it took only 5 sec., that's totally normal
I think everything is fine with your device now, isn't it?
scholbert
Click to expand...
Click to collapse
Hi Scholbert,
Thanks again. Yes, my guy is working pretty good right now. The only question is why the SPL is still "SPL-1.40.OLIPRO" rather than "SPL-2.10.OLIPRO".
phoebe0616 said:
Hi Scholbert,
Thanks again. Yes, my guy is working pretty good right now. The only question is why the SPL is still "SPL-1.40.OLIPRO" rather than "SPL-2.10.OLIPRO".
Click to expand...
Click to collapse
This is because you cannot update hard spl via the sd card method on a hermes. You have to do it following the instructions. You can flash a rom or radio but not the spl.
parleyp said:
This is because you cannot update hard spl via the sd card method on a hermes. You have to do it following the instructions. You can flash a rom or radio but not the spl.
Click to expand...
Click to collapse
Thanks Parleyp for your reply.
However each time when I tried to update SPL through PC by running "RUUWrapper", it failed as "Connection Error [260]". And tried two laptops and two different SPL resource and two different USB cables. Both laptops are WIN XP with SP2.
parleyp said:
This is because you cannot update hard spl via the sd card method on a hermes. You have to do it following the instructions. You can flash a rom or radio but not the spl.
Click to expand...
Click to collapse
Not true... The instructions from post 6 is the sd card method to flash Hard SPL(If you don't believe me go to page116, post 1160 on the Hard SPL thread). You need to run sspl.exe using the file explorer on your hermes (it needs to be on the phone memory) not the sd card.
Also make sure the card is formatted FAT32 and 2Gb or less.
It will always be quick as the file size is small but I've done it successfully many times for both my own and friends Hermes.
Cheers...
ultramag69 said:
Not true... The instructions from post 6 is the sd card method to flash Hard SPL(If you don't believe me go to page116, post 1160 on the Hard SPL thread). You need to run sspl.exe using the file explorer on your hermes (it needs to be on the phone memory) not the sd card.
Also make sure the card is formatted FAT32 and 2Gb or less.
It will always be quick as the file size is small but I've done it successfully many times for both my own and friends Hermes.
Cheers...
Click to expand...
Click to collapse
Thank you very much, Ultramag69. You are really sharp.
It works perfectly.
Thank you all of you guys again.
Glad to hear it.
Now, if you want to flash a new rom, I'd suggest using the sd card method as I feel its safer. Just leave out the steps using SSPL.exe as you now have Hard SPL installed...
Welcome to the wonderful world or rom flashing...
ooops wrong thread sorry
delete me
people, it's possible this? i've read others posts!!about unbricker methods... it's possible or not? erofich, help us!!! Thanks
what is a "gold card"?
Man, i've read this in http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard it's possible to get something like that for HTC S411?
its possible it will work.......cause i think this was originally done on the herald. But then you're still stuck at this step:
Code:
Download a shipped ROM (not a dumped or cooked ROM!) with the [B]same Device ID[/B] as yours
so you're still stuck, since u need a shipped rom for the s411
XtreMe_G said:
its possible it will work.......cause i think this was originally done on the herald. But then you're still stuck at this step:
Code:
Download a shipped ROM (not a dumped or cooked ROM!) with the [B]same Device ID[/B] as yours
so you're still stuck, since u need a shipped rom for the s411
Click to expand...
Click to collapse
Device ID isn't a Carrirer ID
device id in our case means STAR100 or STAR160
yes aldo, i think it will work!
please, could you help me? because this phone is very uncommon in my country, i need the gold card, i don't know who has this phone. please send me the file if you have this phone. thanks
my bad......got my IDs mixed up. So aldo, u are ok with that, u can use either the qtek rom or the dopod rom. all the steps and files you need are in that wiki. you dont need another s411 for this, you just need a working windows mobile phone to obtain the card ID. its really easy, i already created one myself, i just haven't had the time to test it yet.
read the instructions in the wiki article, and if you are having problems, then post in the thread that's linked in that wiki article. And once you are done, if you're successful, post here, so others that have bricked their phone know that they can use this method to unbrick it.
please, attacht the file for test... please
i don't have any WM device, please attacthment the file to test in my phone
dude, there is no file to post, its written directly to the sd card.
if i generated the file instead of directly writing it, this file will only work with my sd card, which is why you need to do this on your own. dont you realize this is why there are only instructions on how to generate the gold card, and no one posted any file. borrow a wm device from someone, it only takes like 3 clicks.
i still cant test if this works.......i need to hunt down a non-sdhc card, i knew i shouldnt have returned that 2gb card.
aldo, you need a gold card image which has own serial number
aldo0203 said:
because this phone is very uncommon in my country, i need the gold card, i don't know who has this phone.
Click to expand...
Click to collapse
you don't need exactly the HTC StarTrek to read your MicroSD card's serial number - you can use ANY Windows Mobile powered device which has a microSD slot
ok, thanks, i'm going to look for someone who has WM device
tomorrow, i'm going to get a WM phone, i still couldn't have to test it... i hope it will work.. cross fingers!!!
dont forget to format your microsd card to fat32 before!
aldo, describe your problem here and stop spamming by both private and visitor messages, or i will add you to black list in my profile
ok, i explain you... when i tried to install the gold key in the SD card, i get a error that it says as follow: You need to set right registry permisions. See the QMAT manual for more info....
Please, tell me what i can do, answer me, thanks and sorry for the inconvenients
http://revskills.de/downloads/QMATManual.pdf
page 38
Oh my God, my phone is live............ it works!!!!!!
oh my god, oh my ****ing god... it works!!!
People follow the steps in http://wiki.xda-developers.com/index...e=Elf_GoldCard; first you have to this is in the WM device working if you don't get the gold card....
This is taken from Manual QMAT: page 38
This tool lets you create a goldcard for HTC devices. The goldcard is a special SD card that unlocks
Diagnostic Features for HTC devices.
Once your device is connected via Activesync / WMDC, you can press "Get SD Card Serial from
WINCE Device" to obtain the serial number of the inserted SDCard in your PDA/Smartphone.
Alternatively you can enter the 16-byte Serial number manually.
To make it work, please check the following :
- On the device, allow start of itsutils.dll
- On some devices you must set the right security permissions via Registry Editor :
HKLM\Security\Policies\Policies\"00001001" set to integer 1
After that, select the device under "device key" to generate a goldcard image.
Then you can choose either "Save Goldcard Image to File" to generate a SDCard Image,
or write the Goldcard directly to the SD Card inserted in your PDA/Smartphone via "Save Goldcard
Image to WINCE SD".
Do it!!! and post your results....
my congratulations
Dear Cmonex,
can you help please the Mega users with the procedure used for Leo (Goldcard) to change from an official Rom to another ?
Thanks
I try, but:
1) Not find key in registry with "2"
2) If i try to flash - have error "0028002 not allow"
Thankyou
Slimper said:
I try, but:
1) Not find key in registry with "2"
2) If i try to flash - have error "0028002 not allow"
Thankyou
Click to expand...
Click to collapse
you must buy QMAT and then make HTC GOLD CARD
Oszi said:
you must buy QMAT and then make HTC GOLD CARD
Click to expand...
Click to collapse
hi, Oszi, even I created gold card success, I still got the 294 problem. Could you help me?
007123456 said:
hi, Oszi, even I created gold card success, I still got the 294 problem. Could you help me?
Click to expand...
Click to collapse
have you a registered version QMAT???
If yes :
format the MicroSD card if FAT32
if you run vista or win7 ,then you must run the QMAT in admin
run in ppc itsutil ,ask for the ppc
now can you make it the gold card
Oszi said:
you must buy QMAT and then make HTC GOLD CARD
Click to expand...
Click to collapse
You can also download one from the "demo" version.
Version 4.24 (Legal, not cracked or something) were is option to creating goldcards you can download from atachments in this post: http://pdaclub.pl/forum/index.php?topic=142183.msg1063217#msg1063217
have a good day
Remember, this is 10 minutes demo - so hurry up with creating goldcard
Oszi said:
have you a registered version QMAT???
If yes :
format the MicroSD card if FAT32
if you run vista or win7 ,then you must run the QMAT in admin
run in ppc itsutil ,ask for the ppc
now can you make it the gold card
Click to expand...
Click to collapse
I have made the gold card successfully, but when I update the rom, I still can not pass the CID problem. Is there any people tell me how to flash the rom? Thanks a lot
in qmat 4.24 no Mega option in drop-down, what device need to select? Elfin or somethink other?
Hi All
Do you have any ideas?
How to unlock this device?
As in the topic...
Nokser said:
Hi All
Do you have any ideas?
How to unlock this device?
As in the topic...
Click to expand...
Click to collapse
it is better you find out - http://psas.revskills.de
and learn PSAs 1.08 was released, I am confident that you can develop it to your device
and as a friend, I can only help with this
I search people.... You have a HTC Monet, please write in this topic
How "bricked" is your device - i.e. which state can you get it when switching on?
tobbbie said:
How "bricked" is your device - i.e. which state can you get it when switching on?
Click to expand...
Click to collapse
This Device run only in Bootloader mode(tri color screen etc)
Problem is.... this phone not have a Official/Ship firmware
Well then the sequence is:
Hard-Reset (L+R Softkey method)
R2SD backup (where can you get THAT? - Even how can you make that, on a GoldCard possibly?)
Official firmware (see above)
Gold Card will not help for loading a cooked ROM as it still needs a signed ROM (despite ignoring the Carrier).
tobbbie said:
Well then the sequence is:
Hard-Reset (L+R Softkey method)
R2SD backup (where can you get THAT? - Even how can you make that, on a GoldCard possibly?)
Official firmware (see above)
Gold Card will not help for loading a cooked ROM as it still needs a signed ROM (despite ignoring the Carrier).
Click to expand...
Click to collapse
Hard-Reset (L+R Softkey method) -> Not Working
R2SD backup (where can you get THAT? - Even how can you make that, on a GoldCard possibly?) -> Not Working
Official firmware (see above) -> Not Find, and not get from Virgin Mobile/HTC
Sad situation - you will have to google around, possibly find owners where you could get at R2SD backup from (if that works for this device). I found this query not so long ago: http://forums.phone-tools.cn/showthread.php/31636-Htc-lobster-700tv-how-can-i-unlock-with-xtc-clip-%28virgin-mobile%29
Do you know if this device has the M-Systems DiscOnChip (like older Wizard and Typhoon(Hurricane/Tornado) or already newer/other encrypted storage?
You could as well try the guys at IMEI-check.UK - they are very knowledgeable and may have a system backup of the supported devices in their drawer (just in case..). Maybe they can fully CID Unlock the SPL on that device and allow the flashing of a cooked ROM (is there any)?
tobbbie said:
Sad situation - you will have to google around, possibly find owners where you could get at R2SD backup from (if that works for this device). I found this query not so long ago: http://forums.phone-tools.cn/showthread.php/31636-Htc-lobster-700tv-how-can-i-unlock-with-xtc-clip-%28virgin-mobile%29
Do you know if this device has the M-Systems DiscOnChip (like older Wizard and Typhoon(Hurricane/Tornado) or already newer/other encrypted storage?
You could as well try the guys at IMEI-check.UK - they are very knowledgeable and may have a system backup of the supported devices in their drawer (just in case..). Maybe they can fully CID Unlock the SPL on that device and allow the flashing of a cooked ROM (is there any)?
Click to expand...
Click to collapse
I understand, but not have a good solutions. i see all this pages... and nothing
My dad still has his Monet on the stock ROM.
IF you can give me simple instructions to follow to dump the ROM, I can do it when I next see him (within the next few months).
Safest method should be to have a GoldCard created and then do a R2SD backup on that card. The R2SD command should be available from the "GoldCard - SuperCID" SPL.
If that works, nothing on the device itself has to be changed and the complete ROM is dumped on the card. In turn that memory card can then be dumped to a file, zipped and shared.
I said simple I've not ever researched gold card and to be honest don't have the inclination to do so. if you could give me clear step by step instructions with links to needed files, I can help.
Well - I don't need it, its Nokser
So he surely will tell you a step-by-step action what to do, maybe even prepare a package for you. It will require downloading a program that can create the Gold Card (psas.revskills.de), have a suiting SD card, as small as 64MB, but any less than 2 GB will do it, a normal USB cable, a PC, a Terminal Program (mtty) and finally one out of a set of tools that can handle the created image.
If all is prepared well, the total time to execute all actions would be ~half an hour (the dump on the device is just a minute!), but you should calculate a little more for this one time action.
Thanks for offering your help to save one of a species from the dumpster!
grayme said:
I said simple I've not ever researched gold card and to be honest don't have the inclination to do so. if you could give me clear step by step instructions with links to needed files, I can help.
Click to expand...
Click to collapse
Hi
Please, you first dump and write in attach. bootloader section
...just to complement the GoldCard idea:
When writing back the dump to a card for loading the broken device, the bootsector of that card may require to be a "gold card" too. Since the Gold Card key is related to the device and the Serial number of the card, the key contained in the bootsector of the dump will not fit to the serial of the new card Nokser has to use.
So after the dump was written back to the card, the PSAS has to write the goldcard-key to the new card again (which is different as the serial of the card is different).
I wish you luck getting that operation done!
I want Bootloader, because in this file is writing all info from load all parts and method backup. All abouts from boot file is importand.
If we IDA execute this file, then we see -> how to get any section and name sectiors
Bootloader (IPL and SPL) are part of the "R2SD All" backup. You can patch them later. Makes no sense to only do partial R2SD backups.
tobbbie said:
Bootloader (IPL and SPL) are part of the "R2SD All" backup. You can patch them later. Makes no sense to only do partial R2SD backups.
Click to expand...
Click to collapse
I understand, but this function is not working in my phone
Also not with "goldcard" inserted? Can PSAS make a GoldCard for Lobster/Monet?
tobbbie said:
Also not with "goldcard" inserted? Can PSAS make a GoldCard for Lobster/Monet?
Click to expand...
Click to collapse
In "goldcard", i don't have any results