Related
continue of this thread.
Did you rename the file and to what? Do you use it with any of the VOX_USPL zip files I posted? Have you taken out your memory card? Have you made sure you don't autostart programs? Have you tried the VOX_USPL which works on Vox (uspl_jockyw.bat), of course rename the file accordingly?
Click to expand...
Click to collapse
I used your last version of VOX_USPL.zip (671kb)
Now, made a full app/registry unlock, renamed my splitted spl to SPL116.nb, removed a MicroSD card, launched a uspl_116_jockyw.bat, and followed instructions - pinguin->white screen->reboot (and turn off in certain cases)
The device is undiscoverable for Windows PC (mtty and ruu aren't discover an usb port/device)
btw, i also tried an early version of VOX_SPL (721 kb) too
Have you made sure you don't autostart programs?
Click to expand...
Click to collapse
Hm? I have a SmartFilter, ClockOnTop, BatteryGauge, and xBar in autostart
ps. but also tried with a clean device (after hard reset and app unlocked)
pps. Can you explain why we must take out a memory card?
Try the later version of the VOX USPL (671Kb):
http://forum.xda-developers.com/attachment.php?attachmentid=47865&d=1187847514
Run uspl_116_jockyw.bat and no need for pressing any buttons on your device. Run it with the original Vox files and also try it with the stripped StarTrek SPL and rename it to USPL116.nb
You should boot your device w/o SD card and w/o starting up any programs. Just run uspl_116_jockyw.bat when your device is fully booted. This is to ensure that WM can not pollute the memory at 0x8c000000
Where can I find some fact sheet on the StartTrek?
jockyw2001 said:
Try the later version of the VOX USPL (671Kb):
http://forum.xda-developers.com/attachment.php?attachmentid=47865&d=1187847514
Click to expand...
Click to collapse
I tried it too
jockyw2001 said:
Run uspl_116_jockyw.bat and no need for pressing any buttons on your device. Run it with the original Vox files
Click to expand...
Click to collapse
Tried - pinguin, hangs up at pinguin screen, and after ~5 seconds device turns off
jockyw2001 said:
and also try it with the stripped StarTrek SPL and rename it to USPL116.nb
Click to expand...
Click to collapse
pinguin->white screen->reboot
jockyw2001 said:
Where can I find some fact sheet on the StartTrek?
Click to expand...
Click to collapse
I don't know.. =\
Well, then I'm afraid you're on your own.
Good luck!
PS: I did find a factsheet on the US HTC site. It has the same CPU as the VOX (TI OMAP 850)
there is a working softspl for startrek
http://4pda.ru/forum/uploads/img-65469-star.rar
all thanks to Alex[DFR] aka sp3dev
That's excellent news! Thanks for the update Erofich!
Im write small programm to unlock and unhide extended rom partition on Gene.
DO NOT USE IT ON OTHER DEVICES
USE IT ON OWN RISK
Copy programm on your Gene and run it.
After the message on success reboot your device.
You will have folder Extended_Rom2 in which it is possible to copy
files and which will be will remain at hard reset.
Total space in ExtRom - 10 MB.
hoho，thank U!
Good Job, trying it now
Thanks a lot
1st of all
thanks for posting the file
any one has successfully installed the file?
yes，it's work.
WOW
Thanks For The Files! It Works On My Dopod D600
Keep The Good Works Coming!
:d
And what can I do with Ext ROm? if i delete some .. will it disappear forever?
how cound i lock it again?
it doesn't work for me
I'd try to run it on my GENE, dopod D600, official from China Mobile.
and it didn't work.
ROM version: 1.2.706.10 CHS
ROM date: 11/30/06
Radio version: 02.71.90
Protocol version: 4.1.13.31
check that exist registry keys:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ondisk2]
"bootphase"=dword:00000002
"DriverPath"="\Drivers\Builtin\ONDisk2"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ONDisk2]
"MountHidden"=dword:00000000
orefkov said:
check that exist registry keys:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ondisk2]
"bootphase"=dword:00000002
"DriverPath"="\Drivers\Builtin\ONDisk2"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ONDisk2]
"MountHidden"=dword:00000000
Click to expand...
Click to collapse
within my GENE, there is no such key:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\ondisk2]
the other key exists, the attribute value is:
"MountHidden"=dword:00000001
what should I do?
create this keys
Thanks for this.. but unfortunately running it made my 4gb sd card renamed from Storage Card to Storage Card2
so all my links are now broken
ElectroV said:
Thanks for this.. but unfortunately running it made my 4gb sd card renamed from Storage Card to Storage Card2
so all my links are now broken
Click to expand...
Click to collapse
Got the same thing. Had to hard reset.
it doesn't work on my D600.
Vukile said:
Got the same thing. Had to hard reset.
Click to expand...
Click to collapse
How do you hard reset??
HTC P3400
Hi everybody!
I've got a HTC P3400 and i need to unlock the SIM card.
Could anyone help me?
I've been searching at this forum but i cant understand how must i do it.
Many tanx
Ghitaj from Earth
Unlock p3401
Tried and nothing happened to my course P3401 BR. Instaley gave Message unlock ok, more to resume remained locked.
I found this topic here:
http://forum.xda-developers.com/showthread.php?t=451991
Thanks to all.
Hey, this worked. I got Z_Card as the name of the new drive. As i am using my custom ROM with 4 MB of extrom, thats what i got but still its great!
ElectroV said:
How do you hard reset??
Click to expand...
Click to collapse
Turn off your Gene
Hold both the softkeys and press the power button. Do not let go of the softkeys until you see a text prompt that says everything will be deleted, now get rid of the softkeys and press the call button.
@oreklov:
Thanks a million. Worked for me, like krazy got a Z card. The box which appeared, though had "Error" in title bar . But the content of the box was "Successful" and hey it was .
Thanks buddy
ghitaj said:
Hi everybody!
I've got a HTC P3400 and i need to unlock the SIM card.
Could anyone help me?
I've been searching at this forum but i cant understand how must i do it.
Many tanx
Ghitaj from Earth
Click to expand...
Click to collapse
Contact jockyw2001 through PM. But do understand that he charges for it. Its not a free service. You send him what he wants, he gives you a quotation, you submit the money and get your code. This is not some sort of duping, this guy is genuine.
So, if you got the bucks, go ahead.
people, it's possible this? i've read others posts!!about unbricker methods... it's possible or not? erofich, help us!!! Thanks
what is a "gold card"?
Man, i've read this in http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard it's possible to get something like that for HTC S411?
its possible it will work.......cause i think this was originally done on the herald. But then you're still stuck at this step:
Code:
Download a shipped ROM (not a dumped or cooked ROM!) with the [B]same Device ID[/B] as yours
so you're still stuck, since u need a shipped rom for the s411
XtreMe_G said:
its possible it will work.......cause i think this was originally done on the herald. But then you're still stuck at this step:
Code:
Download a shipped ROM (not a dumped or cooked ROM!) with the [B]same Device ID[/B] as yours
so you're still stuck, since u need a shipped rom for the s411
Click to expand...
Click to collapse
Device ID isn't a Carrirer ID
device id in our case means STAR100 or STAR160
yes aldo, i think it will work!
please, could you help me? because this phone is very uncommon in my country, i need the gold card, i don't know who has this phone. please send me the file if you have this phone. thanks
my bad......got my IDs mixed up. So aldo, u are ok with that, u can use either the qtek rom or the dopod rom. all the steps and files you need are in that wiki. you dont need another s411 for this, you just need a working windows mobile phone to obtain the card ID. its really easy, i already created one myself, i just haven't had the time to test it yet.
read the instructions in the wiki article, and if you are having problems, then post in the thread that's linked in that wiki article. And once you are done, if you're successful, post here, so others that have bricked their phone know that they can use this method to unbrick it.
please, attacht the file for test... please
i don't have any WM device, please attacthment the file to test in my phone
dude, there is no file to post, its written directly to the sd card.
if i generated the file instead of directly writing it, this file will only work with my sd card, which is why you need to do this on your own. dont you realize this is why there are only instructions on how to generate the gold card, and no one posted any file. borrow a wm device from someone, it only takes like 3 clicks.
i still cant test if this works.......i need to hunt down a non-sdhc card, i knew i shouldnt have returned that 2gb card.
aldo, you need a gold card image which has own serial number
aldo0203 said:
because this phone is very uncommon in my country, i need the gold card, i don't know who has this phone.
Click to expand...
Click to collapse
you don't need exactly the HTC StarTrek to read your MicroSD card's serial number - you can use ANY Windows Mobile powered device which has a microSD slot
ok, thanks, i'm going to look for someone who has WM device
tomorrow, i'm going to get a WM phone, i still couldn't have to test it... i hope it will work.. cross fingers!!!
dont forget to format your microsd card to fat32 before!
aldo, describe your problem here and stop spamming by both private and visitor messages, or i will add you to black list in my profile
ok, i explain you... when i tried to install the gold key in the SD card, i get a error that it says as follow: You need to set right registry permisions. See the QMAT manual for more info....
Please, tell me what i can do, answer me, thanks and sorry for the inconvenients
http://revskills.de/downloads/QMATManual.pdf
page 38
Oh my God, my phone is live............ it works!!!!!!
oh my god, oh my ****ing god... it works!!!
People follow the steps in http://wiki.xda-developers.com/index...e=Elf_GoldCard; first you have to this is in the WM device working if you don't get the gold card....
This is taken from Manual QMAT: page 38
This tool lets you create a goldcard for HTC devices. The goldcard is a special SD card that unlocks
Diagnostic Features for HTC devices.
Once your device is connected via Activesync / WMDC, you can press "Get SD Card Serial from
WINCE Device" to obtain the serial number of the inserted SDCard in your PDA/Smartphone.
Alternatively you can enter the 16-byte Serial number manually.
To make it work, please check the following :
- On the device, allow start of itsutils.dll
- On some devices you must set the right security permissions via Registry Editor :
HKLM\Security\Policies\Policies\"00001001" set to integer 1
After that, select the device under "device key" to generate a goldcard image.
Then you can choose either "Save Goldcard Image to File" to generate a SDCard Image,
or write the Goldcard directly to the SD Card inserted in your PDA/Smartphone via "Save Goldcard
Image to WINCE SD".
Do it!!! and post your results....
my congratulations
I purchased a Taiwanese Iolite (T4242), comes with Chinese version.
I used the QMAT to Change the CID to SperCID and than Just flashed it with :
_file_RUU_Iolite_HTC_Europe_1.09.401.3_Radio_Sign_12.41.30.16_0.41.30.12_Ship.exe
IT WORKS FLOWSLY... and my device is now WWE.
How to do it:
I just followed the instructions on the http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard&action=BackLinks:
• Download QMAT and MTTY from http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
o The latest copy of QMAT is also found http://revskills.de/pages/download.html
• A spare microSD card
• Optional: a card reader
Format your memory card for FAT32
• If you have a card reader, go to DOS and type:
format <volume> /FS:FAT32 /A:4096
where <volume> specifies the drive letter of the SD card. For example: format d: /FS:FAT32 /A:4096
Run QMAT to create the Gold Card
1. Put the newly-formatted SD card in the working WM device and connect to ActiveSync
2. Run QMAT, go to the Hardware Forensics menu, and then select "Generate HTC Goldcard"
3. Select your device's key (Iolite)
4. Get the SD Card Serial from WINCE Device
5. Save the Gold Card image to the SD Card
6. Put the SD card in your device and put it into bootloader mode (hold down the VolumeDown button and press the reset button).
7. Now you have a card which gives you SuperCID.
8. With the card inserted into the Iolite, which is in bootloader mode, connect the Iolite via USB to ActiveSync.
9. From your PC, run the RomUpdateUtility.exe from the RUU folder containing the WWE shipped ROM
It should start flashing if everything is configured properly!
Good Luck
Thank you for your info but the steps are hard to follow, admire your patience!
I flashed mine without making a GoldCard to unlock my Iolite. Mine was in CHS and after flashing become Europe WWE. I am looking for an Asia WWE. There is one in the forum but it can't be flash and I don't know whether it is because it is RUU .... _Test.exe and not ... _Ship.exe
Maybe the GoldCard unlock method will work and not sure it is worthwhile to try.
In fact it is very easy.... if you read it carefully you see that it is just connect your device with a formated sd and than reboot it to boot loader...
The next is flash with any ship rom.
Seems that your country id matched the rom you flashed.. however you will not be able to flash any-rom.
As it seems to me many users are stucked with rom flashing .. Hard SPL has not been around yet.. so this is a nice solution and once again - very easy!!!
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
You have to purchase a license.
domestik said:
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
Click to expand...
Click to collapse
Yes you are right. I did purchase a license. Trojan??? please explain.
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
MTTY check-up
domestik said:
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
Click to expand...
Click to collapse
Mmm.... in fact, I did copy the entire directions of "Howto", however I did not even use the MTTY.. pay attention that in my notes, I ignored checking of SuperId setup. The Mtty is required just to check that you have a superid before flashing. It is not required (I think so...) with this machine... it wull not flash if the SuperId did not load.... so just to make it simple : connect the machine, setup the SD card and flash ..... easy no?
I will not load the MTTY from Rapidshare I trust that you checked it and since it is not required... I suggest that you eliminate this step.
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Need to use the written SD each time...
koalaii said:
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Click to expand...
Click to collapse
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
borce_razor said:
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
Click to expand...
Click to collapse
Yes. Success with Jade, HD and Iolite WWE to RUS
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Where supercid down!!!!! Buildor, making a link! Thank you!
Galaida, can you try to explain what have you done and what did not work for you? perhaps we can help to resolve the issue?
Should work.... please include in your answer the name of the rom you tried to flash and error messages that you received while in process of the Gold Card.
Link to QMAT
LITANG said:
Where supercid down!!!!! Buildor, making a link! Thank you!
Click to expand...
Click to collapse
I am not sure if this was requested... however here is the link to the "home" of the utility:http://revskills.de/pages/download.html
I suggest thta you get it from this site, as other users already reported RapidShare and other may have a Trojan as well.
QMAT
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Galaida said:
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Click to expand...
Click to collapse
try typing "boot"
avocaz said:
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Click to expand...
Click to collapse
Can anyone offer me some insight please?
avocaz said:
Can anyone offer me some insight please?
Click to expand...
Click to collapse
I can help, PM me
Unregistered QMAT cannot create GoldCard for Iolite.
Dubi said:
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
Click to expand...
Click to collapse
Dubi, wait a minute, do you have a registered QMAT or an unregistered version?
As one of the forum member commented, it will take 20 Euros, (more than $30) to register QMAT in order to make a GoldCard with the method you mentioned.
Can you confirm that?
Regards,
I changed it sometimes but now I no longer remember how to get it back.
How can I view the current?
If someone could help..
I have now:
CotullaHSPL
2.15.50.14 (radio)
15.42.50.11U
3.14.04666 (ROM)
jvc+-2009 said:
I changed it sometimes but now I no longer remember how to get it back.
How can I view the current?
If someone could help..
Click to expand...
Click to collapse
Flashing stock ROM over SD.
kurt-willems said:
Flashing stock ROM over SD.
Click to expand...
Click to collapse
So how to do it in practice?
Load new ROM to card and download it from there?
jvc+-2009 said:
So how to do it in practice?
Load new ROM card and download it from there?
Click to expand...
Click to collapse
step by step:
- Go on the HTC website > support > HTC HD2 > Rom upgrade
- Enter your S/N
- Download the ROM file
- Open the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Ship" with WinZip/Zip7 and extract the "RUU_signed.nbh"
- Renamed the "RUU_signed.nbh" to "leoimg.nbh"
- Take a SD card (a 2GB is perfect) (Don't use 8GB ore bigger)
- Format your SD (select FAT32)
- Copy the leoimg.nbh to your SD
- Set your device off
- Insert your SD
- Reset the device while pressing the volume down button
- Follow the instructions on your screen.
PS; I mention it already in the beginning; but it's important to use the correct ROM!
By using your S/N on the HTC webpage you will get the right ROM.
I just read you have edit your first post; I suppose you don't have HSPL.
In this case you can just run the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Ship" right from your PC by connecting your device over Active sync.
kurt-willems said:
I just read you have edit your first post; I suppose you don't have HSPL.
In this case you can just run the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Ship" right from your PC by connecting your device over Active sync.
Click to expand...
Click to collapse
It is CotullaHSPL.
Edit. I did it now, but there is still CotullaHSPL???
So I did it:
- Go on the HTC website > support > HTC HD2 > Rom upgrade
- Enter your S/N
- Download the ROM file
- Open the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Sh ip" with WinZip/Zip7 and extract the "RUU_signed.nbh"
- Renamed the "RUU_signed.nbh" to "leoimg.nbh"
- Take a SD card (a 2GB is perfect) (Don't use 8GB ore bigger)
- Format your SD (select FAT32)
- Copy the leoimg.nbh to your SD
- Set your device off
- Insert your SD
- Reset the device while pressing the volume down button
- Follow the instructions on your screen.
Use HSPL2 (http://forum.xda-developers.com/showthread.php?t=611433) to install any (non H)SPL to your HD2. Then, install the latest official ROM (3.14) downloaded from HTC to get the latest official ROM & SPL. This should work.
aBE-One said:
Use HSPL2 (http://forum.xda-developers.com/showthread.php?t=611433) to install any (non H)SPL to your HD2. Then, install the latest official ROM (3.14) downloaded from HTC to get the latest official ROM & SPL. This should work.
Click to expand...
Click to collapse
Now I got it working
It is now SPL 3.03.0000
THANKS (Sulla oli ratkaiseva tieto..)
Guys i have big problem i try back stock rom from sd card i used good rom from htc i have big problem while isnatiling showing error 00018003 OS-fail, Updaute Terminate Update Fail??? What now i did like in instruction but i have 8gb sd card, that my problem, please help.7!!!!
stachu-ginka said:
Guys i have big problem i try back stock rom from sd card i used good rom from htc i have big problem while isnatiling showing error 00018003 OS-fail, Updaute Terminate Update Fail??? What now i did like in instruction but i have 8gb sd card, that my problem, please help.7!!!!
Click to expand...
Click to collapse
- Take a SD card (a 2GB is perfect) (Don't use 8GB ore bigger)
how can i check my CID?? because i dont which rom install? and i check bootlaeder and i have official spl but a cant install sd card
HSPL2 is not compatible with TMOUS Leos, so how am I supposed to get SPL back?
2 gd card also didnt work, what now??
stachu-ginka said:
2 gd card also didnt work, what now??
Click to expand...
Click to collapse
Normally if you follow the instruction; it will works on a 2GB SD card.
But if it don't work for you; can you mention what you did and where at witch point it goes wrong.
Ok from the begining, I have hspl and have custom rom, chance a lot, and yesterday leo didnt work i cant install any rom so i decided to come back to stock rom, im polish ORANGE Mobile so try wwe easteurope stock 3.14, 1.66, 1.48 and 1.43 from sdcard beacause my leo was broken and i cant connect with my laptop so did like you said download the offical rom from htc, format sd card, change ruusigned to leoimg, at start was goog, install get process, in the end was show OS-fail error 00018003 and Update Terminate, pdate Fail??? and i chance card from 8gb to 2 gb and the same, any idea what can i do??
stachu-ginka said:
Ok from the begining, I have hspl and have custom rom, chance a lot, and yesterday leo didnt work i cant install any rom so i decided to come back to stock rom, im polish ORANGE Mobile so try wwe easteurope stock 3.14, 1.66, 1.48 and 1.43 from sdcard beacause my leo was broken and i cant connect with my laptop so did like you said download the offical rom from htc, format sd card, change ruusigned to leoimg, at start was goog, install get process, in the end was show OS-fail error 00018003 and Update Terminate, pdate Fail??? and i chance card from 8gb to 2 gb and the same, any idea what can i do??
Click to expand...
Click to collapse
Sir, a small question. You mention in your post "polish ORANGE Mobile" do you mean you have a branded device?
If you go on the HTC webpage (polish) and you enter your S/N are you able to download the stock ROM 3.14? Ore give it you a error?
yes I bought in polish Orange, yes a try from polish htc supoort, the same problem....
stachu-ginka said:
yes I bought in polish Orange, yes a try from polish htc supoort, the same problem....
Click to expand...
Click to collapse
If you mean by " I bought in polish Orange" that it's a branded device than it's normal sir. there is no orange polish stock ROM 3.14.
In this case you need to use the GoldCard technique.
Ok, but how can I use Gold card if my leo is broken and I cant connect via mobile device and synch, my non responde...when I trun on show up grey scrren with tringule and sentence software update failed, please try again
I try did everything what I can but nothing help so I make 3 photo, first when I turn on leo, second failed updated orignal rom and third after failed updated when leo is in bootloader and there is my question Have I original SPL?? if my failed updated overwrite the HSPL?? because leo is still on varianty so I can give to service and nothing pay? Please help one more Can I install custom rom from sd card lright now, i Have originalSPL or not??