I changed it sometimes but now I no longer remember how to get it back.
How can I view the current?
If someone could help..
I have now:
CotullaHSPL
2.15.50.14 (radio)
15.42.50.11U
3.14.04666 (ROM)
jvc+-2009 said:
I changed it sometimes but now I no longer remember how to get it back.
How can I view the current?
If someone could help..
Click to expand...
Click to collapse
Flashing stock ROM over SD.
kurt-willems said:
Flashing stock ROM over SD.
Click to expand...
Click to collapse
So how to do it in practice?
Load new ROM to card and download it from there?
jvc+-2009 said:
So how to do it in practice?
Load new ROM card and download it from there?
Click to expand...
Click to collapse
step by step:
- Go on the HTC website > support > HTC HD2 > Rom upgrade
- Enter your S/N
- Download the ROM file
- Open the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Ship" with WinZip/Zip7 and extract the "RUU_signed.nbh"
- Renamed the "RUU_signed.nbh" to "leoimg.nbh"
- Take a SD card (a 2GB is perfect) (Don't use 8GB ore bigger)
- Format your SD (select FAT32)
- Copy the leoimg.nbh to your SD
- Set your device off
- Insert your SD
- Reset the device while pressing the volume down button
- Follow the instructions on your screen.
PS; I mention it already in the beginning; but it's important to use the correct ROM!
By using your S/N on the HTC webpage you will get the right ROM.
I just read you have edit your first post; I suppose you don't have HSPL.
In this case you can just run the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Ship" right from your PC by connecting your device over Active sync.
kurt-willems said:
I just read you have edit your first post; I suppose you don't have HSPL.
In this case you can just run the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Ship" right from your PC by connecting your device over Active sync.
Click to expand...
Click to collapse
It is CotullaHSPL.
Edit. I did it now, but there is still CotullaHSPL???
So I did it:
- Go on the HTC website > support > HTC HD2 > Rom upgrade
- Enter your S/N
- Download the ROM file
- Open the "RUU_Leo_(S)_HTC_xxx_x.xx.xxx.x_..._LEO_(S)_Sh ip" with WinZip/Zip7 and extract the "RUU_signed.nbh"
- Renamed the "RUU_signed.nbh" to "leoimg.nbh"
- Take a SD card (a 2GB is perfect) (Don't use 8GB ore bigger)
- Format your SD (select FAT32)
- Copy the leoimg.nbh to your SD
- Set your device off
- Insert your SD
- Reset the device while pressing the volume down button
- Follow the instructions on your screen.
Use HSPL2 (http://forum.xda-developers.com/showthread.php?t=611433) to install any (non H)SPL to your HD2. Then, install the latest official ROM (3.14) downloaded from HTC to get the latest official ROM & SPL. This should work.
aBE-One said:
Use HSPL2 (http://forum.xda-developers.com/showthread.php?t=611433) to install any (non H)SPL to your HD2. Then, install the latest official ROM (3.14) downloaded from HTC to get the latest official ROM & SPL. This should work.
Click to expand...
Click to collapse
Now I got it working
It is now SPL 3.03.0000
THANKS (Sulla oli ratkaiseva tieto..)
Guys i have big problem i try back stock rom from sd card i used good rom from htc i have big problem while isnatiling showing error 00018003 OS-fail, Updaute Terminate Update Fail??? What now i did like in instruction but i have 8gb sd card, that my problem, please help.7!!!!
stachu-ginka said:
Guys i have big problem i try back stock rom from sd card i used good rom from htc i have big problem while isnatiling showing error 00018003 OS-fail, Updaute Terminate Update Fail??? What now i did like in instruction but i have 8gb sd card, that my problem, please help.7!!!!
Click to expand...
Click to collapse
- Take a SD card (a 2GB is perfect) (Don't use 8GB ore bigger)
how can i check my CID?? because i dont which rom install? and i check bootlaeder and i have official spl but a cant install sd card
HSPL2 is not compatible with TMOUS Leos, so how am I supposed to get SPL back?
2 gd card also didnt work, what now??
stachu-ginka said:
2 gd card also didnt work, what now??
Click to expand...
Click to collapse
Normally if you follow the instruction; it will works on a 2GB SD card.
But if it don't work for you; can you mention what you did and where at witch point it goes wrong.
Ok from the begining, I have hspl and have custom rom, chance a lot, and yesterday leo didnt work i cant install any rom so i decided to come back to stock rom, im polish ORANGE Mobile so try wwe easteurope stock 3.14, 1.66, 1.48 and 1.43 from sdcard beacause my leo was broken and i cant connect with my laptop so did like you said download the offical rom from htc, format sd card, change ruusigned to leoimg, at start was goog, install get process, in the end was show OS-fail error 00018003 and Update Terminate, pdate Fail??? and i chance card from 8gb to 2 gb and the same, any idea what can i do??
stachu-ginka said:
Ok from the begining, I have hspl and have custom rom, chance a lot, and yesterday leo didnt work i cant install any rom so i decided to come back to stock rom, im polish ORANGE Mobile so try wwe easteurope stock 3.14, 1.66, 1.48 and 1.43 from sdcard beacause my leo was broken and i cant connect with my laptop so did like you said download the offical rom from htc, format sd card, change ruusigned to leoimg, at start was goog, install get process, in the end was show OS-fail error 00018003 and Update Terminate, pdate Fail??? and i chance card from 8gb to 2 gb and the same, any idea what can i do??
Click to expand...
Click to collapse
Sir, a small question. You mention in your post "polish ORANGE Mobile" do you mean you have a branded device?
If you go on the HTC webpage (polish) and you enter your S/N are you able to download the stock ROM 3.14? Ore give it you a error?
yes I bought in polish Orange, yes a try from polish htc supoort, the same problem....
stachu-ginka said:
yes I bought in polish Orange, yes a try from polish htc supoort, the same problem....
Click to expand...
Click to collapse
If you mean by " I bought in polish Orange" that it's a branded device than it's normal sir. there is no orange polish stock ROM 3.14.
In this case you need to use the GoldCard technique.
Ok, but how can I use Gold card if my leo is broken and I cant connect via mobile device and synch, my non responde...when I trun on show up grey scrren with tringule and sentence software update failed, please try again
I try did everything what I can but nothing help so I make 3 photo, first when I turn on leo, second failed updated orignal rom and third after failed updated when leo is in bootloader and there is my question Have I original SPL?? if my failed updated overwrite the HSPL?? because leo is still on varianty so I can give to service and nothing pay? Please help one more Can I install custom rom from sd card lright now, i Have originalSPL or not??
Related
Hello all,
My XDA 1 has a fault I don't understand. When I hit the Power on button it comes on and stops at the O2 splash screen. It will not go beyond this point no matter what I try. The desktop does not recognise the device when I connect via USB. I have tried:
1. Soft reset
2. Hard reset
3. booting up in bootloader and running all device tests (failed USB rx & Infrared rx)
4. In bootloader copying boot to SD and booting with that. (Unfortunately I do not currently have an SD card large enough to copy CE or GSM boot)
What I really need to know is if I can try to upgrade the device (to WM2003) anyway and if the upgrade will solve the problem I have now.
DEVICE DETAILS:
Device: O2 xda 1
Bootloader: 5.14
ROM: 4.01
Radio: 3.02
Any and all advice/help/replies most welcome. Sorry if this has been answered previously but I searched and couldn't find the info I needed.
Thanks,
Aide
It's a lost cause...
Device can't connect to activesync via serial or USB so I can't upgrade and see if that solves it. Don't have card reader to try SD method. The problem is as described in my first post above.
I don't know how this happened (I hadn't tried upgrading or any sort of flashing apart from unlocking the device a looooong time ago).
Any ideas as to a solution would be greatly appreciated.
Aide
Your ROM version is not known (at least for me ) ... are you sure it's not 4.01.00 ??
Anyway, regardless of the reason, the good news is that you still have the boot loader working, the bad new is that you MUST use the SD method since the ActiveSync doesn't recognize the device.
Thanks Bis,
Yes ROM is 4.01.00 (sorry if I confused anyone ). Problem is at a new level.
I got an XDA with a cracked screen (so it's almost impossible to use though everything works) and used that with XDAtools (thanks Jeff) to upgrade to xda-dev Special Rom 1.2.
I copied the ROM to the 32MB SD card (got and error message at the end) but still risked using it to try bootloader method on the 'hanging xda. It worked: kinda :?
It now boots and hangs at the xda-dev splash screen and no other changes to original problem. Was that error message I saw responsible or could something hardware related have happened?
Still waiting for relief...Help me please. Someone, anyone...
Aide
aicon said:
I copied the ROM to the 32MB SD card (got and error message at the end) but still risked using it to try bootloader method on the 'hanging xda. It worked: kinda :?
Click to expand...
Click to collapse
That's your problem - redo everything above - but using a 64MB SD Card or higher. The ROM files are just over 32MB. Even if your card said it was all there chances are it could have been corrupt.
-JB
Thanks JB,
Getting 128MB card in the morning, will let all know how it went.
Aide
PS: Noticed someone posted same initial problem under topic 'XDA 1 locked on O2 screen' in General forum with no solution posted. So if anyone is interested - watch this space!
Ahhhh... God is in his heaven and all is right with the world
Used 128MB card and it worked like a charm. One thing I noted though: After I used XDAtools to copy ROM to the SD card and put it in the device it would not boot from the card automatically. I assume the ROM update tool on the device checks to see if the current ROM and the one on the SD card are the same and ignores the SD card if they are. (By the way, could someone please confirm if this is so? Idle curiosity :wink: )
I had to use the tool on the device to write the ROM to SD from one device and then the other device (that had the hanging problem) finally read that copy.
Thanks all,
Aide
some boot loder versions doesn't recognize ROM file on SD cards ... ex: 5.22
hi brothers, i upgraded my O2 XDA Atom last night--result fail. i didn't backup ROM on SD card, so i can't restore by using SD card and i can not find someone to fix it for me in my city. does anyone can upload the full SD Backup ROM for me? it would be great! thank you very much.
You're stuck in the bootloader after an ExtROM Flash Fail, right? Do you have the DSUU windows upgrade executable?
If you don't, download the latest Atom ROM upgrade from the O2 site, connect your device to the PC's USB (you'll see the message on the Atom's screen change to Connected), and run the upgrade (it will think you're trying to flash to an empty device with ROM version 0 - let it). IIRC you do NOT need to use an SD card ROM for this process.
To ensure success, be sure you have removed the SIM card from your device first - and it usually takes one or two tries before the extrom format command goes through successfully (*glares at Quanta*). As long as what failed is only your ExtRom you should be able to salvage your device.
Thanks brother, i will try it.
Ok so first is first.. I did read the wiki and I have searched.. even posted in a rom 3.42.50 post (i think that was it) but no replies...
so in that other post I followed the instructions.... I used a 512mb micro sd and a 64mb micro sd....
jambrose said:
FROM THE TITAN WIKI:
Flashing a phone with a micro SD card
1. With a card reader on your PC, format a non-SDHC (<=2GB) microSD card into FAT32 (tested to work up to a 4KB cluster size)
(the default size for a 1 GB would not work, also if it takes only a few seconds to format
try formating with some other slot/device. A 1 GB took over a minute to format correctly)
To format your Card - Open a DOS box and type/copy and paste this: ( format ?: /FS:FAT32 /A:1024 )
Replace the ? with whatever your SD cards drive letter is... ie: f, h, I.... Mine is G....
2. Copy the ROM to flash (xxxxxxxx.nbh) to the root of the microSD
3. Rename the ROM xxxxxxx.nbh to TITAIMG.nbh
4. Insert your card.
5. Force into the boot loader with POWER-CAMERA-RESET
6. Follow the instructions and you'll quickly flash your Titan...
7. You may have to soft reset once it says the update is complete
(If you are using UC let the customizations run so it will read the SDConfig.txt file)
This will work to flash with an official ROM and radio, I think regardless of the boot loader you have installed. But ensure that you have the correct boot loader (olipro 2.40 for this GPS ROMs) installed for when you do eventually finish with your flashing and are ready to boot into the OS.
Click to expand...
Click to collapse
so i have been trying this for a while tonight.. cant get it to work...
I am getting the Loading... screen.. all grey but that is it...
512mb micro sd... TITAIMG.NBH file exists...
any ideas??
I did not install olipro 2.40... should I??
alot of views but that is it..... hmm...
ok I installed nueSPL-2.47
so now it says.,.
TITA100
SPL-2.47No2Chem Titan SPL EVT CPLD-9
still cant get it...
now trying to boot to upgrade the rom I get the reg, green, blue, white part of the screen... and it says serial....
can anyone help me???
it sounds to me like you have nueSPL installed correctly.
In the past I have had problems with formatting sd cards, the only reliable way I have found to format them so that they work for flashing roms is to use the nue format utility... it is up somewhere on nuerom.com
It will erase everything on your card, so back it up first
after the card has been formatted, copy the "TITAIMG.nbh" file to the root of the card
Put the card in your phone and reboot into bootloader mode
it should detect that there is a rom image on the card and ask you to press the power button to continue.
The flashing process takes about 1 minute to complete (so much faster than using activesync)
Once everything is done it will say something like "process complete", and then you soft reset and you are done
which rom are you trying to install?
mpenguin14 said:
which rom are you trying to install?
Click to expand...
Click to collapse
yeah was weird... on about the 12th try of doing so much... copy rom, format, etc... eventually got it...
so which rom....
now I am ready for recommendations on this...
Here is what I use my phone for..
1. Phone - duhhhhh
2. GPS - Big time use....
2.a. Speedometer for my pickup truck... gpsspeedometer.exe
2.b. iGuidance
3. few games
4. Sirius radio via wifi
I do not have a data plan.... was going to get one soon but just bought a 2008 silverado z-71 crew cab.. so car payment is a bit much... so dont want to fork out the extra on a data plan.....
I have to check again but I think this is the one im going for...
Titan M2D Round 4 ROM (DCD 3.2.6 and TouchFlo 2D)
my biggy was getting the radio upgraded more importantly for better GPS... however I have got it to sync yet.... well im inside the house and cant get it to sync... raining outside too....
TeleFragger said:
yeah was weird... on about the 12th try of doing so much... copy rom, format, etc... eventually got it...
so which rom....
now I am ready for recommendations on this...
...
I have to check again but I think this is the one im going for...
Titan M2D Round 4 ROM (DCD 3.2.6 and TouchFlo 2D)
Click to expand...
Click to collapse
I am glad that you were able to get it working. I enjoy flashing different roms, but am not really a nit-picky user.
I fonally donated to no2chem today so that I can use his nueRom3-pre3, it is a pretty nice rom that gives you the option to disable your camera and get an extra 8 MB in free ram, I am also really liking the nueWifiSwitch. But like I said you have to donate to get the rom, and I have only been using it for 6 hours or so.
before that I was pretty much exclusively on a custom build of DCD 3.2.6, just a bare minimum rom, which I like because I flash quite often.
It does seem like people are liking the "Titan M2D Round 4 ROM" a lot. It looks pretty good, in fact it even includes a program that I made, Manilla 2D Customizer, which will let you tweak Manila 2D and apply some themes.
Good luck, and I hope flashing your rom via SD card goes a little bit smoother than your radio flash
Can some one know how can I get windows 6.1 for my dopod 838pro and installation procedure. I saw some preview from youtube that it will work like htc touch pro or touch diamond. http://www.youtube.com/watch?v=PsSNzYftjZs
OK, look at the top bar, You should see a word that looks like this - "Search". Click on it, type in a request making sure to specify the hermes. Wow, answers galore....
Sorry I tried my level best but I can't find any wm 6.1 for my dopod 838pro. Can you plz give me any direct download link in english version. My present rom
ROM: 3.54.707.3 (07/05/07)
Radio: 1.47.00.10
Protocol: 32.80.7020.20H
Try the WM06 part of the forum, I believe heres a sticky with a heap of cooked roms and the new WM6.5 in production on various posts....
At least tell us you Hard SPLed your Hermes, look here - http://forum.xda-developers.com/showthread.php?t=296722
You need to do this BEFORE upgrading the rom. You need Hard SPL V7.
I got problem to instal spl v7. When trying to update it after a certain next, the display gone multi color and it says that connection is no longer exist. when I check spl on my device it shows spl 2.03. I am using vista home. What to do. Sorry for bother you again.
Go to page 116,post 1160 of thread I gave you. It tells you how to install Hard SPL with the sd card.
Just remember, the sd card MUST be 2Gb or less, it has to formatted FAT32 and the spelling of hermimg.nbh is VERY important.
Cheers...
Thanks bro fainally I made it.
I still can't find the wm6.1 upgrade page. I tried HardSPL 7, it finishes in an instance, how do i check whether i have HardSPL it?
And where do i find the update for 6.1? I'm pretty new to all this, so I am kinda blur and lost now~
@ultramag69 i tried Hard-SPL-V7 with the help of this instruction http://forum.xda-developers.com/showthread.php?t=296722&page=116 and mobile said update in progress bfor half an hour and still its in progress it ill complete or is it in problem can i remove battery?....................
still update in progress more than 45 mins is this complete can i remove battery anyone pls help me..........
after one hour its in progress so i removed battery now mobile not power up not enter in to boot mode any solution? any one pls help me.................
Just Did my phone for the first time
Go to this link first and make sure your phone has the latest version installed.
http://forum.xda-developers.com/showthread.php?t=296722
Follow the sets it's easy enough
After you soft reset your phone
That being done you'r now ready to flash a new rom there are plenty on the hermes windows mobile 6 thread
http://forum.xda-developers.com/forumdisplay.php?f=355
I found this rom to be the most like the one on the u-tube video
http://forum.xda-developers.com/showthread.php?t=461490
Down load the rom, extract the files
rename the ruu_sgned file to "Hermimg"
Now put a micro SD memory card in a card reader
open my computer right click the drive that represents the memory card and format it
choose the fat 32 file system.
now copy the hermimg fie to the root of the card
soft boot your phone
press the power button to comfirm the rom update and watch the progress bar
when complete
reset your phone and the new software will install
if you get a new soft ware installed do you want to reset pick no
the phone will reset when all the software is installed.
great stuff
try a few rom
find the one you like best
sry but you will need to put that card in your phone after you copy hermimg onto it
maybe you should go to the how to unbrick my phone thread
didn,t see that last post
ouch!!
here's the best chance at I solution
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Go here
I hope you find an answer
I purchased a Taiwanese Iolite (T4242), comes with Chinese version.
I used the QMAT to Change the CID to SperCID and than Just flashed it with :
_file_RUU_Iolite_HTC_Europe_1.09.401.3_Radio_Sign_12.41.30.16_0.41.30.12_Ship.exe
IT WORKS FLOWSLY... and my device is now WWE.
How to do it:
I just followed the instructions on the http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard&action=BackLinks:
• Download QMAT and MTTY from http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
o The latest copy of QMAT is also found http://revskills.de/pages/download.html
• A spare microSD card
• Optional: a card reader
Format your memory card for FAT32
• If you have a card reader, go to DOS and type:
format <volume> /FS:FAT32 /A:4096
where <volume> specifies the drive letter of the SD card. For example: format d: /FS:FAT32 /A:4096
Run QMAT to create the Gold Card
1. Put the newly-formatted SD card in the working WM device and connect to ActiveSync
2. Run QMAT, go to the Hardware Forensics menu, and then select "Generate HTC Goldcard"
3. Select your device's key (Iolite)
4. Get the SD Card Serial from WINCE Device
5. Save the Gold Card image to the SD Card
6. Put the SD card in your device and put it into bootloader mode (hold down the VolumeDown button and press the reset button).
7. Now you have a card which gives you SuperCID.
8. With the card inserted into the Iolite, which is in bootloader mode, connect the Iolite via USB to ActiveSync.
9. From your PC, run the RomUpdateUtility.exe from the RUU folder containing the WWE shipped ROM
It should start flashing if everything is configured properly!
Good Luck
Thank you for your info but the steps are hard to follow, admire your patience!
I flashed mine without making a GoldCard to unlock my Iolite. Mine was in CHS and after flashing become Europe WWE. I am looking for an Asia WWE. There is one in the forum but it can't be flash and I don't know whether it is because it is RUU .... _Test.exe and not ... _Ship.exe
Maybe the GoldCard unlock method will work and not sure it is worthwhile to try.
In fact it is very easy.... if you read it carefully you see that it is just connect your device with a formated sd and than reboot it to boot loader...
The next is flash with any ship rom.
Seems that your country id matched the rom you flashed.. however you will not be able to flash any-rom.
As it seems to me many users are stucked with rom flashing .. Hard SPL has not been around yet.. so this is a nice solution and once again - very easy!!!
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
You have to purchase a license.
domestik said:
Maybe it works. But.... not in unregistered version with Trojan.
Be careful!
Click to expand...
Click to collapse
Yes you are right. I did purchase a license. Trojan??? please explain.
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
MTTY check-up
domestik said:
It works, i did so.
At this link http://rapidshare.de/files/46772105/qmat_and_mtty.zip.html
there is Trojan
p.s. For all: don't forget to patch ROM to remove regionlock checking.
Click to expand...
Click to collapse
Mmm.... in fact, I did copy the entire directions of "Howto", however I did not even use the MTTY.. pay attention that in my notes, I ignored checking of SuperId setup. The Mtty is required just to check that you have a superid before flashing. It is not required (I think so...) with this machine... it wull not flash if the SuperId did not load.... so just to make it simple : connect the machine, setup the SD card and flash ..... easy no?
I will not load the MTTY from Rapidshare I trust that you checked it and since it is not required... I suggest that you eliminate this step.
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Need to use the written SD each time...
koalaii said:
Tested from a Taiwanese rom to a European one and it works great. Thanks a lot for the tip !
Click to expand...
Click to collapse
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
borce_razor said:
OK, this seems to work. Just post here successful stories. And test this on other devices, topaz, rhodium and even htc rose
Click to expand...
Click to collapse
Yes. Success with Jade, HD and Iolite WWE to RUS
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Where supercid down!!!!! Buildor, making a link! Thank you!
Galaida, can you try to explain what have you done and what did not work for you? perhaps we can help to resolve the issue?
Should work.... please include in your answer the name of the rom you tried to flash and error messages that you received while in process of the Gold Card.
Link to QMAT
LITANG said:
Where supercid down!!!!! Buildor, making a link! Thank you!
Click to expand...
Click to collapse
I am not sure if this was requested... however here is the link to the "home" of the utility:http://revskills.de/pages/download.html
I suggest thta you get it from this site, as other users already reported RapidShare and other may have a Trojan as well.
QMAT
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Galaida said:
HTC Iolite ptg, cid HTC__506. I can not do anything with it. for "ruurun 0" reply "command error". Gold card not worked. htctr.exe not generate correct *.nbh.
Click to expand...
Click to collapse
try typing "boot"
avocaz said:
Hi guys, tried this and got the message saying i gotta register QMAT before it will let me make a Gold card thingie
so before i go and spend 20 bucks just wanna make sure this will let me unlock my Iolite so that i can install WWE
Click to expand...
Click to collapse
Can anyone offer me some insight please?
avocaz said:
Can anyone offer me some insight please?
Click to expand...
Click to collapse
I can help, PM me
Unregistered QMAT cannot create GoldCard for Iolite.
Dubi said:
I am glad that it is a kind of a solution..... however remeber that each time you want to flash the device, you have to have the Super-CID sd in the machine.... and you are set.
Click to expand...
Click to collapse
Dubi, wait a minute, do you have a registered QMAT or an unregistered version?
As one of the forum member commented, it will take 20 Euros, (more than $30) to register QMAT in order to make a GoldCard with the method you mentioned.
Can you confirm that?
Regards,