I'm currently running Dopod wm5 (http://rapidshare.com/files/53995708/ruu_s...podwwe_ship.rar), and I've application and reg unlocked, and done everything, but I keep getting error 260 when it verifies the device ID. I've tried multiple roms. Can anyone help?
(I flashed the official rom from Erofich's v9a)
make SuperCID ( http://forum.xda-developers.com/showthread.php?t=292068 )
SuperCID
I did that
Maybe it's the fact that I'm flashing from the wrong OS? I've tried from windows xp on virtual machine, Vista, and win 7 RC.
try this, it should help
http://forum.xda-developers.com/showthread.php?t=512136
Problem solved!
I flashed the imate wm5 rom and unlocked and flashed normally from there.
Related
I recently purchased a SPV M3100 after reading many great reviews on this device.
I have just unlocked it using the HTC Hermes SIM & CID unlocker v3a using my old Windows XP laptop and it works great (I've tried using my Vista ultimate 64 computer earlier it didn't work).
I am now interested in upgrading my SPV M3100 to latest software available from Orange or the WM6 roms available on this site like Black Dymond, really keen in seeing its potential.
I have read through the Hermes upgrading forums carefully and made sure all is done properly. I have even read through the Mr Vanx step guides in upgrading.
First I decided to use the Orange update from their website.
After making sure the USB cables are connected correctly and allowing the WMDC to sync I proceeded to run the update.
I followed each step and tick the boxes. The phone goes into the tricolour mode or bootloader screen with the following on the screen:
Herm100
IPL-1.01
Herm100
SPL-1.40
On the computer, the window 'verifying your device' is on for few minutes, after this a new window appears indicating: ERROR 260 - update error
This happens again and again, day after day, I have soft reset the device, rebooted the computer, tried both the XP and vista computers, check the usb cable and connections, did everything that is said in the forums, but nothing....
I have even attempted to use the HardSPL program and followed the process to load the black dymond, but same message appears.
Must note that after soft resetting the device the phone returns to its original state, so no harm done. but no upgrade....... Damm...
Help... Any ideas ...... Please....
Many thanks
Danny
UK
Orange SPV M3100 / Hermes 100
Operator 14.123.1.614
ROM 1.23.61.4
Radio 1.16.00.0
IPL 1.01
SPL 1.40 Olipro
Update your WMDC to the latest version.
Then try again
Thanks for your prompt reply...
I thought when I originally installed the WMDC was the latest version as I have downloaded it from the Microsoft windows mobile website....
I have downloaded the appropiate Vista 64 version for my vista machine and the appropiate xp version for my xp laptop...
Did you download the latest version...are you sure??
http://www.microsoft.com/windowsmobile/devicecenter.mspx
Same problem -> Error 260 if I try to upgade.
Hi
I hve the same issue. Tried on Windows XP and Vista.
Also downlaoded the latest WMDC.
Could that be something with the area code?
I'm in Norway.
For XP should you not be using ActiveSync 4.5?
I re-flahed my M3100. The first attempt it failed, it then recovered itself and the second attemp was successful.
Im sure I have, just downloaded the other day, anyway I have downloaded it again just now, installed it, connected my phone and allowed the sync process to complete. I run the orange update again and still the same message..... Error 260: update error
What SPL version do you have?
To check press and hold BOTH the side ok button and the power button, then insert the stylus into the hole in the bottom of the device.
I have SPL 1.40 Olipro
So i take it you havent read or searched on this error, the orange RUU cannot recognise your device because you have anewer SPL version (HardSPL)...ffs dude had you told us that fact it would have saved you PLENTY of time. You posted you had SPL version 1.40...................you SHOULD have said you have already updated to HArdSPL (1.40.olipro)
follow my Safe WM5 Flashing Guide to get it done.
Sorry if I have wasted your time. I thought that I included the my phone details (SPL and rom etc) on my original message.
I have searched for this error, but I gather I wasn't getting anywhere...
So I thought I would ask for some help and advice....
Anyway thanks for replying with your help. I will check your link straight away.
If I still have problems, I hope it would be ok to ask in this thread.
Thankx Mr Vanx for all your help.
It is now working. I've loaded the WM6 Black IV Shadow rom.
Do you know when there will be a 3G / video dialer for this rom.
Many thanks
Hi MRVANX, i also have the same SPL and my radio is not working. I tried to open the link that you have pasted but the link is broken. Can you please share the info here or on my email address "[email protected]"
hello,
with this guide i have managed to downgrade my prophet to the NVID rom.
the flashed worked well and now i am at the "tap the screen" step from the newly flashed aku2.2 rom.
now i should install the wm6 rom and i downloaded the PDAVIET 4.0.0.0.3.
i started the "upgrade_rom.bat" and i get several error messages, about that the software is not compatible with a 64bit windows.
what can i do now? can't i flash an other rom on my device? please help me.
edit: it seems like the sleep4.exe is not compatible
now i tried it with windows xp via vmware:
it updates to the aku2.2 until the point, where i should stick for a while with 80%. then it displays an error message and i tried it again. same thing.
so i flashed the nvid aku2.2 over vista x64 without a problem, i disconnected the device, open up vmware with windows xp and connected the device here.
i started the upgrade_rom.bat from pdaviet 4.0.0.0.3 and it clears and copys the new extension rom.
the it will write the crossbow OS rom, then the following error appears:
could not update itsutils.dll to the current version.
then the flashing stops. what can i do now?
edit:
now i tried it with active sync 4.2 (not 4.5) but i still can't even flash the nvid rom on my xp. at 80% it gives me the error 302
Hi everyone, I am having troubles with my device. I upgraded to wm 6 and am having dramas with it, I have tried reinstalling the wm6 rom and even the original wm5 rom and get an error. I am running vista and have no luck with xp either.
I can connect via active sync no dramas and the mobile device screen even changes to the 4 colours like it is about to upgrade.
I get error 260 updator error.
I need help downgrading to wm 5.
djmikey said:
Hi everyone, I am having troubles with my device. I upgraded to wm 6 and am having dramas with it, I have tried reinstalling the wm6 rom and even the original wm5 rom and get an error. I am running vista and have no luck with xp either.
I can connect via active sync no dramas and the mobile device screen even changes to the 4 colours like it is about to upgrade.
I get error 260 updator error.
I need help downgrading to wm 5.
Click to expand...
Click to collapse
Check THIS GUIDE . Look for downgrade guide section. Pay special attention to Vista instructions and all the version information. .NET Framework, ActiveSync, etc... Versions are important.
first off, let me say that i have a vista(32-bit) and a winxp(64-bit) machine so flashing has been fun *sarcasm*. I have been unable to set the hard spl on this phone. Using ShellTool, i successfully wrote a wm6 rom, was liking it. I then went to try a newer version of the rom and i get stuck at the HTC screen that shows IPL/SPL of 2.28.0001, GSM 02.25.11, and OS 11.0.4.0. I can hard boot and I can enter the red/green/blue bootloading screen. Is there anything I can do with my setup to re-flash an OS on here or am I screwed? thanks in advance
There's no need to upgrade through Shelltool,it can easily be upgraded through HardSPL.
Secondly,HardSPL doesn't work on vista and winXP 64 bit,for HardSPL to work successful ,do it on WinXP 32 bit,there won't be any problem.
this being the reason i used shelltool, it worked successfully on a TNT rom, was hoping to upgrade to the newer one. i've been debating the fact of putting xp32 on here too, thanks though
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am a desperate newbie. thanks.