hi
can somebody help me how to add icons to the system tray, next to the battery and comm manager icon.
Thanks
Try ilauncher by sbsh
http://www.sbsh.net/products/ilauncher/
I use the tray launcher part of PHM Power Toys:
http://www.phm.lu/products/PocketPC/PowerToys/
randomelements said:
I use the tray launcher part of PHM Power Toys:
http://www.phm.lu/products/PocketPC/PowerToys/
Click to expand...
Click to collapse
Yeah would definitely recommend this, been using it for quite some time now!
I had this on my iPAQ 2210 under WM 2003 for years, but cannot install it on my HTC TP2. I run the file PHM Pocket PC PowerToys.msi on my PC. It brings up the AS Add/Remove dialog (is that usual?) but no entries for PHM appear and nothing else appears to happen.
Is it compatible with WM 6.1?
--
Terry, East Grinstead, UK
terrypin said:
I had this on my iPAQ 2210 under WM 2003 for years, but cannot install it on my HTC TP2. I run the file PHM Pocket PC PowerToys.msi on my PC. It brings up the AS Add/Remove dialog (is that usual?) but no entries for PHM appear and nothing else appears to happen.
Is it compatible with WM 6.1?
--
Terry, East Grinstead, UK
Click to expand...
Click to collapse
Anyone?
--
Terry, East Grinstead, UK
Hi
I dont have any icons in my traybar. On my Qtek9000 i hade a icon for ScreenRotation and one for the ComManager and i think one for the battery, but I'm missing the 2 first so I wonder if anyone know how i can add them on my HTC Advantage?
Thnx
/Magnus
I find it annoying too that they've removed the icons from the tray bar. On the advantage the only option for now is to use the HTCHomeplug unless you're clever enough to figure out all the registry crap.
I did a bit of messing but the only one I got right was the battery icon.
So mabey you can tell me how you did get the battery icon to work..
cya
/Magnus
Check out http://vijay555.com/?Releases:VJTrayLaunch
Don't use mine. PHM Tray Launch is better!
V
vijay555 said:
Don't use mine. PHM Tray Launch is better!
V
Click to expand...
Click to collapse
But yours shows better looking icons on the tray compared to PHM TrayLaunch using Dopod U1000.
how do i get the battery icon to show up in the taskbar like it did in wm 5.0 since installing 6.1 i have yet to get it to show up
LilSnoop40 said:
how do i get the battery icon to show up in the taskbar like it did in wm 5.0 since installing 6.1 i have yet to get it to show up
Click to expand...
Click to collapse
supposedly, modify this reg key:
[HKLM\Software\Microsoft\Shell\]
"ShowTitleBarClock"=1
Create new DWORD
"TBOpt"=1
havent tested
or try the prog in this thread
http://forum.xda-developers.com/showthread.php?t=364278
O2 Xda Atom Exec Only!!!
ROM Author: Jaime
ROM image Builder: tjkhattak61
tjkhattak61, thanks for all you effort. This project wouldn't have been possible without your help. We made a good team my friend!!!)
CE OS 5.2.19949 (Build 19209.1.0.5) Very fast and stable. Battery consumption is acceptable.
Blue theme
Touchy interface (PointUI Home)
Touchy keyboard
Touchy audio manager
Touchy photo album
Touchy comm manager
Touchy dialer
Touchy calendar
Touchy calculator
Touchy Cube Menus
Finger scrolling almost everywhere!!! Just try
ROM
Blue Keyboard Skin
CapSure 1.11
ChDict.NET 1.2.2413.34976
Chess by Valentin Iliescu
DotFred PIMbackup v.2.8.0.0
DotFred SoftKey Appletex v.1.4.0.1
DotFred TaskManager v.3.0.0.1
HTC Network Wizard
HTC Album v1.0.822.716
HTC Audio Manager v1.2.515.718
HTC BFtp
HTC SIM Manager v.6.33.0.0
HTC Touch Dialer
HTC Touch Diamond Keyboard
Jeyo SMS Backup v.1.1
Mode SMS
MortButtons V2.51b14
MortScript V.4.1.1.5
NetCF Framework 3.5
Photo Resize 1.0 by frusso
PocketLight 1.0.0.7
Pocket Solver
PocketMoku
PocketNotepad by Tillanosoft
Smart Scroller
PointuiHome version 1.51a
SpbCalc Blue Skin
SRS WOWHD v.1.2.10.0
ThumbCal v0.5.1
Total Commander/CE 2.5
UPX4PPC Version 0.4.3
WM5torage v.1.80
Extended ROM
Album Skin files
Audio Manager Skin files
Dialer Skin files
keyboard Skin files
MortButtons Skin files
Wireless Manager by Jaime
Slide your finger everywhere!!!
Just press right soft key (PointUI Home) after soft reset and
LET THE MAGIC BEGINS!!!
Credits:
Abuzalsa
Chartreux
Mort
gullum
Agamemmnon
poorlyduck
and many others.
Link1:
ROM_230708(19949_Touchy).exe - 54.81 Mb
Link2:
ROM_230708(19588_Touchy).exe - 56.58 Mb
Happy to see the NEW ROM,thanks for all you effort!
Jaime you have made it finally. Congratulations you are the one for Exec.
Jaime nice to see the Touchy baby on XDA forums, congrats man and keep it up. And thanks for the compliment .
Looks awesome, well done!
Two Q's: Activesync via Bluetooth working?
Why is build not aligned with CE, any particualr reason?
Congrats & Thanks
Hi Jaime,
Thanks for the surprise. I will surely download in the night and try it out. WIll let you know my comments.
I am hoping it to be amazing in advance.
Thanks alot.
Ash
Network Wizard
Jaime,
Does this ROM have Network Wizard configured for Etisalat in UAE
Ash
transcriber and letter recognizer
does this latest ROM has transcriber and letter recognizer module?????
ahdeshpande said:
Jaime,
Does this ROM have Network Wizard configured for Etisalat in UAE
Ash
Click to expand...
Click to collapse
I dont think so but before flashing the ROM replace network folder in ExtendedRom from ur old ROMs ExtendedRom (hope u not confused) and u will get the network settings.
onnicked said:
does this latest ROM has transcriber and letter recognizer module?????
Click to expand...
Click to collapse
It has block recognizer, letter recognizer, keyboard, touch keyboard, touch keypad, touch qwerty keyboard and no transcriber.
homer285 said:
Looks awesome, well done!
Two Q's: Activesync via Bluetooth working?
Why is build not aligned with CE, any particualr reason?
Click to expand...
Click to collapse
Activesync via Bluetooth not checked.
The build is not aligned with CE as Jaime did some magic with it to make it battery friendly. The magic worked but it has now this build align problem .
tjkhattak61 said:
Activesync via Bluetooth not checked.
The build is not aligned with CE as Jaime did some magic with it to make it battery friendly. The magic worked but it has now this build align problem .
Click to expand...
Click to collapse
Well it looks the bomb, trying it now.
homer285 said:
Well it looks the bomb, trying it now.
Click to expand...
Click to collapse
Hi, thank you tjkhattak61 for responding the questions as I was sleeping here in Mexico.
Remember everyone that 50% of the credits go to tjkhattak61.
tjkhattak61 said:
I dont think so but before flashing the ROM replace network folder in ExtendedRom from ur old ROMs ExtendedRom (hope u not confused) and u will get the network settings.
Click to expand...
Click to collapse
Hi tjkhattak61.
Do you think that it is gonna work? I thought we had to put xml country configurations file into provision.zip country network wizard settings file.
onnicked said:
does this latest ROM has transcriber and letter recognizer module?????
Click to expand...
Click to collapse
The main purpose of this ROM is to make Atom Exec owners stay away from stylus as much as possible with an original interface other than iphonish or htc thouch ones so no transcriber built in.
It is the industry tendency
The second purpose of this ROM is to keep Atom Exec owners out of Diamond or iphone stores
Regards,
Jaime.
tjkhattak61 said:
Activesync via Bluetooth not checked.
The build is not aligned with CE as Jaime did some magic with it to make it battery friendly. The magic worked but it has now this build align problem .
Click to expand...
Click to collapse
It isn't really a problem. It was made on purpose. Build 19949 battles a lot keeping registry keys and it is when errors and battery drain come up.
Let's say that it is a car with big engine (19949) with acuate accessories (19209).
Regards,
Jaime.
Jaime Méndez said:
The main purpose of this ROM is to make Atom Exec owners stay away from stylus as much as possible with an original interface other than iphonish or htc thouch ones so no transcriber built in.
It is the industry tendency
The second purpose of this ROM is to keep Atom Exec owners out of Diamond or iphone stores
Regards,
Jaime.
Click to expand...
Click to collapse
wow.. thanks for that info ... now i understand... well, keep it up guys, you got a very intelligent team out here who had push their effort in creating something so beautiful as what we are enjoying now... he he he
thanks to all of you (you know who u are... )
thanks guy.. i will really love to try this out!!! look great!!
Jaime Méndez said:
Hi tjkhattak61.
Do you think that it is gonna work? I thought we had to put xml country configurations file into provision.zip country network wizard settings file.
Click to expand...
Click to collapse
Hey Jaime it works like magic as I tried it and it is the easiest way to do instead of going into the prvisi... provissss provin... that thingy. Although this then reverts u to the old network settings instead of ur star clad network settings .
HP 6815
Hi,
I've got an iPAQ rw6815 and i'm actually very fond of "touchy" interfaces. I love PointUI, for example.
So, can I use this rom with my pda?
If not, where can I find the ingredients I would at least try to put them into the boring (!) WM5 the ipaq has by default. (None of the wm6/6.1 roms out there on this site has worked reliably for me, yet)
Can charmer using WM 6.5.5, and what the difference with wm 6.5.1?
for us the difference are:
Start button is on the bottom and the button is larger
There is a status pannel on the Today screen when tapping on the top of the screen
But I think that 6.5.1 is better (in some programs on 6.5.3 there are no buttons - tested on pocketrar; and some programs have smaller square and it is a Today background on the half of the screen)
And the last time I use WM6.1 because all programs work faster even if the amount of free RAM on 6.5 is grater
Oh, I will be happy if U understood me, my English is not so good as I've imagined...
Yes we can run 6.5.5 and I tried to port it some time ago.
But I wasn't able to find any really stable builds, so I keept using Build 28004, which is best till now for me.