i can not upgrade form wm5 to 6.5 when i press rom exe show me message
great c\windows\temp failed
can u tell me steps of upgrading
upgrade to WM6.5
I have also ATOM LIFE, could you send me the link to WM6.5 to try it
Put all the unzipped files to C:\WINDOWS\TEMP. Make sure that your Atom is activesynced with PC and don't use bootloader. Start the Update Utility in the TEMP file and go.
alternatively you can put it into bootloader mode.. if its an Atom Life then you just have to download a cooked WM6.5 ROM (for the atom life) then place it on your Memory Card -Don't put too much on the memory card besides the AL1.dio file because it will slow the process down significantly. Then boot your phone and reset if with the soft reset button AND hold down the record button to go into boot loader. DO NOT turn the phone off while it does this
NOTE: Dont do this with less than 70% of your battery
do u have the link to dowload 6.5??
.... Use the search function before you post please.. LINK
Related
If you need PM
I modified the Atom exec's ExendedROM.img So it can be use in our Normal Atom!!!
Please NOTE:
unrar 5 rar package to C:\windows\TEMP
run device Software Update Utility.exe install!!!
Enjoy!!!
This pic is snap by CHT version
ENU version is same Ext0033 8)
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Ph4nt0m said:
Kobefei,
Have you tested it? Does it solve the Screen flieckering problem or we still need to keep the Batery charged?
Read in the forum that the BOOTLOADER funtionality wasnt avaible in this EXEC ROM, turning a little bit more dificult to upload the original Atom ROM. Would u know if this is still happening in this "upgraded" version?
Many Thanks,
Ph4nt0m
Click to expand...
Click to collapse
My sentiments exactly. Will this ENU version solve or i should say NOT have the flickering problem and the bootloader problem when reverting back to the original atom rom. I hope soooooo!!! Thanks for the hard work!!!
Has anyone tried this modified Rom atom exec 20060721 on ATOM.
I'm using ROM ATOM EXEC 20060614. This Rom is very good!!!
Cools !!! :lol:
lol
lol
lol
They are captured from a forum and I summarized them as followings.
Possible outcomes after flashing atom with exec rom 20060721.
1) Flickering screen if you REMOVE the battery (so stay away from exec roms if you plan to remove battery once a while, or you occasionally or accidentally deplete the battery). A possible reason is real atom exec use a different screen type (or hardware revision), as it show hardware revision "B" in system information of a real atom exec (later model)
2) New July exec rom does not allow you to return to any previous rom versions, neither via usb ActiveSync update nor bootloader mode, in fact, the bootloader mode in this version does not allow you flash any rom versions, if you try to flash rom in bootloader mode, it will stop and display "pls update in OS mode and synchronised"
3) Can't make a call without using bluetooth or headset, other people can't hear me when using phone mic. Some even added that other cannot hear voice from atom via headset.
A way to do it if you still want to proceed the update .
1) Run atom 0426 rom update program, after the DSUU program extracted the files, don't click "next", go to windows/temp folder, copy those files extracted, except "diskimage_Ver.nb0" and "ExtendedRom.img", then save them somewhere else.
2) Run july exec rom update program, after the DSUU program extract the files, don't click "next," go to windows/temp folder, overwrite with the files you just saved, this will leave only the diskimage_Ver.nb0 & ExtendedRom.img files as of the july exec rom, others become atom rom files, including an older bootloader which allows you to flash back other roms.
3) Flash.
thank you
Kyo said:
They are captured from a forum and I summarized them as followings.
Click to expand...
Click to collapse
Thank You! Seems that we should wait for a oficial Atom Update....
Thanks a lot buddy
I just want to know is how to backup the original rom,
using romupdate???
OK
Really cool
I installed the Atom Exec modified update on my Atom. And i tried to install the Old Rom Upgrade of Atom, am getting Country Id or Device Id error. Can anyone help me to install my old Atom ROM upgrade.
Try a hard reset. That should solve it.
Is it impossible to restore 426 after "full install" 0712? My screen flickering much and make me dizzy. Hope someone can help... thx
hard reset can't help. restore 0426 rom impossible.
If you want to revert to the 0426 rom, from the 0721 rom. Copy the eboot file from the 0426 installation to you miniSD card and go to bootloader, when its done you can install the 0426 rom again.
regards
yass
Just wondering if anyone out there would be kind enough to upload one of the new Atom Exec roms, edited to re-include the bootloader option (for installation on an 'old' Atom).
The 20060915 rom (not convinced the 20060721 is really the latest being it came out a while back ... and of course there's the name) with R060822N_MN2ARC_RS00013 radio update would be ideal - but as I'm looking to do a housekeeping reflash, any update from the old edited 0721 mod_n-fix rom will be greatly appreciated.
I have upload Roms but i d'ont know if you want those one!
bedav - thanks for the uploads, preferably am looking for a modified 0915 rom ... anyone out there got one ?
V.V.V.Urgent help please
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
****THANKS I HAVE BEEN ABLE TO SOLVE THE PROBLEM****
I got rid of the Atom and bought an Imate JasJam. Much Better Pocket PC Phone on comparision. Slower and a bit more complex but better in features and works well. It is also well supported in Mumbai, India.
THANK YOU ALL.
hsanghavi said:
I am stuck with the O2 Atom Exec Rom Version: 20060915 on the Atom and am unable to remove or re-rom any other version. I tired the bootloader mode: Camera+reset but it will not overwrite it and give a USB error. Can anyone tell me how to get rid of it.
Click to expand...
Click to collapse
I suggest you search through the forum, the solution has been discussed in detail, dont use the SD card to flash back unless you're 100% sure you know what you're doing. What you need to do is dl the edited 60721 rom and flash then you will be able to downgrade rom.
I can't find any of the edited roms on the ftp. Where to get?
try to reupgraded from boot loader!!
HELP
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
silverkuo said:
My Atom Exec can't boot, just bootloader only. can't reflash from Device Software Update Utility.exe,
PC report = ERROR: CONNECTION ERROR
Atom report = please use dsuu in os mode and sync with PC first! usb transfer fail
I'm tried rename diskimage_Ver.nb0 to diskimg.nb0, and copy EBOOT.nb0 to SD to SDDownload success, but same can't boot
help me
THANKS!!
Click to expand...
Click to collapse
User activesync to update the ROM.
I have flashed my O2 Atom with WM5 AKU3.3.3 Final (From Master Jiggs), unfortunately I need to flash back to Original O2 Atom (Xda-Atom-ENG-20060426-MOT0822). I can't do it the DSUU always gives an error.
I also tried with BOOT LOADER method as below, also it gave error
1) Remove SD
2) Remove battery
3) Press Camera button + Reset + Insert battery
4) Connect USB -> Run DSUU
Please anyone can give me the step 1 by 1 how to flash back my O2 ATOM.
THANKSSSSSS
Why no-one reply
I tried to search from here, and try a couple of ways, still can't flash to original rom.
At lease please Master Jiggs could you please give me an idea how to do this?
Thankssss a ton
You can try reverse engineering the upgrade procedure found in the WM5 AKU 3.3 topic. It goes like this, but you'll most probably need the AKU2.2 nb0 file.
(which I currently don't have any idea how to extract from the AKU 2.2 ROM. The AKU 2.2 ROM should be avaliable in the same topic if you need it, but you should already have it I think)
UPGRADE PROCEDURE:
1. Your device battery must be at least 80% charged.
2. Enter into boot loader mode: POWER+DPAD(center)+RESET (simultaneous)
3. Connect device to PC using USB
4. Run the original ROM update (in your case, would be 3.3.3 final)
5. On the Welcome window, click <next>
6. Unzip nb0 file into C:\Windows\Temp Folder (overwrite existing file) - you need the nb0 file from the AKU 2.2 ROM here
7. Proceed upgrading and follow on screen instructions.
PS: I have no absolute garuntee this works. The Atom is one locked down mofo. -.-
Thank you so much Ultimate Chicken
There are questions I am not clear
1)I have the extract .nb0 files from AKU2.2, there are 2 .nb0. Do I need to use this both to replace in C:\Windows\Temp after run the DSSU of AKU3.3?
2) After I executed AKU3.3 and look into C:\Windows\Temp, there is no .nb0 file in there so I don't know whether this is correct that to replace AKU2.2 .nb0 files into C:\Windows\Temp (Because there is no .nb0 file exist to replace)
Please help
Thankssss again
see attached
Q1 has already been answered for you. So...
2) After I executed AKU3.3 and look into C:\Windows\Temp, there is no .nb0 file in there so I don't know whether this is correct that to replace AKU2.2 .nb0 files into C:\Windows\Temp (Because there is no .nb0 file exist to replace)
Click to expand...
Click to collapse
That's why the instructions tell you to click NEXT first at the welcome screen (step 5) before doing anything. If you don't you won't see anything in Windows\Temp.
Thank you both of you for the information.
Quick Chicken :
To confirm because I destroy my Atom
If I tried your solution & if it is not working or end up at some steps.
Can I regain back my Atom by flashing it with WM5 AKU3.3 again?
THNKSSS
Repeat Vvvvv
This should work, because I did end up stuck in what wasn't even a bootloader (black screen with large white text that said "connect a USB cable") and was still able to resuscitate my Atom. As long as you have a bootloader that isn't locked (the Atom's, by default, isn't), and you didn't misflash your bootloader, it's possible to reflash your Atom.
To play it safe, remove your SIM and memory cards before flashing.
You may run into a common problem ExtROM_FORMAT_FAIL. If you do get this, your bootloader should be safe (and you should end up in the Connect A USB Cable screen) - retry the flash from scratch repeatedly and one of the attempts should go through.
PS: I still can't garuntee a thing. Frankly, my experience with the hacked Exec ROM might be a fluke or something. Good luck.
Ultimate Chicken
Thanks a million Time I am flashing my Atom back now. Wait & See the result.
Another question from a newbie like mine. You are talking about flashing the boot loader, it seems to be very serious if I flash wrongly my boot loader. So could you please give me a knowledge or a link on this, so that I am not flashing my bootloader wrongly.
Thanks again.....
The bootloader flash is part of the process. It also (thankfully) is the shortest part of the process. Without a bootloader your device won't run at all, and it can't be recovered short of sending it back for repairs.
I can't remember when it occurs, but should be before the ExtROM flash. Your PDA screen and DSUU should show you the details while the event is in progress.
Good luck. ^_^
O2 Atom LIFE....
After the package file release (AL1_CB_0425_WWE_B1_DSUU.exe), he was copy all of file to MiniSD and reset Atom Life to bootloader mode and it was upgrade. So, upgrade to 99% it was notice error. He softs reset it after wait for minute. it can not power on and black screen.
My Atom is Blinking RED... & BLANK SCREEN.... ((((((((((((
I'm copy IPL.nb0 and EBOOT.nb0 to minisd card... & ... (((((((
PLZ HELP ME!
try to flash back the shipped rom from O2.
My atom Life is dead too
I just have got it yesterday andthen i flashed it today with the WM 6.1 rom from Medkid and then was working, then i wanted to get back to the original rom then i downloaded one from the wmg homepage and was not working, then i extracted the files and put on my minisd and it has flashed but then it was not working anymore... is just black screen... nothing works.. tried removing the baterry, reseting, hard reseting,.. no lights on.. just when i plug it to charge i see the charging light on.. Can someone please help me too.. pleaseeeee
thanks
My Atom
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
unplug MiniSD then Try to do hard reset...
you can rescue your devices (atom/Atom exec / Atom life/ HP 68xx/ O2 Flame) by JTAG
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
rizalnasa said:
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
Click to expand...
Click to collapse
Can you still get the bootloader?
If you can boot it up to the boot loader. you can plug into your computer and flash another rom. I had the same problem a week ago. now my atom is working again with Homers WM6 rom
Hello did somebody know from where i can download original WM 6 or 6.1 ROM for HP IPAQrw6815-not modified?
thanks
Teodor
[email protected]
hp doesn't come out with WM6 or WM6.1 for ipaq 6815.... there's only custom roms which are modified to work with ipaq 6815... you can choose from a variety of them in here.... have fun!...
thaks for this
Help with My ipaq 6815
Nhocbanme hi,
i've read thru many of the replies in this forum. i'm a newbie and don't knw much abt roms. i tried upgrading or if u call it flashing my ipaq via PC and later SD. the PC flash did not work. i had to wait almost the whole day becos it said it was reading configuration from the phone. i later tried the flash via a transcend 1GB miniSD and till today the phone has gone off. i tried to power it on even with th e battery fully charged. my sis has the same phone i tried swapping batteries but it still didn't come on. i really need to upgrade to windows mobile 6.1 i formerly had WM 5.0, today itried again and it still stays on the boot screen.(white background with the HP logo and the Pbl 1.05 at the botton of the screen .
please i need help ASAP.
Downlgrade your bootloader to 1.01
Hi,
You have to downgrade your bootloader from 1.05 to 1.01. Find in the following the instructions how to do it. I did it and it's working.
Be careful when you do downgrade, because you can end up without phone
Quote:
How to flash from PC with Windows XP (It is ok to run it in vmware)
Thanks Knave and rcperez for posting their detailed experience so I can write this section. Also thanks jimmyspa for improving the addheader's performance greatly.
1. Check your Boat loader version
(do a soft reset, and check the value printed at the bottom during the HP logo screen)
2. If you noticed that the last line states BL 1.00.05, it means you have boat loader 1.05 installed. You will need to download and flash your phone back to 1.01 via ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe (VERY DANGEROUS, FLASHING VIA SD IS MUCH SAFER!)
3. After successfully downgraded your phone's boatloader, or your version was already v1.01, you can proceed to flash your phone to the rom.
With the check done, proceed with the required files.
1. Go to download section to download the rom file. -- The rom that you downloaded, e.g (diskimg.nbo)
2. Download the file pcupdate.zip attached in this thread and unzip the contents to the same folder you used in step 1.
3. Download the latest Rom file and extract to the same folder
4. Run BuffereAddHeader.bat. It will take seconds to generate a diskimage_Ver.nb0. (You should have Java Runtime > 1.50 installed, http://www.java.com/en/download/manual.jsp)
5. Move your phone to boatloader mode ( press the two - keys, follow by a poke at the soft reset hole with your stylus )
6. Connect the phone to the PC
7. Execute the Device Utility Update program and wait till it verifies the state. Click on Update Item "All" use cursor keys to change it to "OS ONLY" then hit next **** SELECT "OS ONLY", if you cant change it to "OS ONLY" DONT PROCEED!!! It should detect your device as Model 0 etc.
8. Press Next to begin flashing.
9. Once completed, the phone will reset by itself. Wait for a while for it to startup.
REMEMBER SELECT OS ONLY BY PRESSING DOWN IN THE SELECTION BOX
Here are the notes & files provided by hochengsoon with README for flashing via Windows XP
PC flashing using BL1.0.1 must be done from C:\Windows\Temp, so why not start everthing from this folder ie PCUpdate + ROM + missing file(s).
PCUpdate1.rar - http://www.mediafire.com/file/k5jumzzg1mm/PCUpdate1.rar
How to downgrade to WM5 using PC
1. download wm5 rom from http://h20000.www2.hp.com/bizsupport...pappid=NextGen
2. run it and after entering the updating screen cancel it.
3. replace the hpRUU.exe in c:\IPAQ(default install) with the attached file hpRUU.exe in archive hpRUU.zip
4. Connect device to PC, then press and hold two "-" button and reset.
5. Run hpRUU.exe and do a normal update.
Note: you may delete eboot*.nbf to prevent bricking the device.
bootloader missing
well i m using HP rw 6815, n last night i had flashed a 6.5 rom , later i was unsatisfied with tat rom,
so i went 2 change it, n during tat process, my phone turned off, n now it doesnt switch on, 1ce i managed 2 go 2 boot screen thr i cud see hp logo n bl-0.0.0 can ne1 help me out with it, how do i put bootloader in phone.. neither my pc detects the phone... help appriciated
HI i had same problem on hp rw6815
No bootloade aparantly but bootloader hp logo loaded but insted o o.0.o i had a ff.ff.ff bootloader. i dunno what that meant. i inserted a eboot.nb0 on sd reseted in bl (v1.0.5 from this forum).... bootloader updated oki.. but my phone transformed in a hp rw6828, and i can install 6828 rom working and bootin fine in rw6815, the rw6815 rom install via sd but restarts on boot screenn .. this appeard when i tried a downgrade from wm6.5 to wm5 when i try to upgrade via hpruu it looks tat i have a no language hpipaq model.. My model info is "€ R 0 6 0 8 2 2 N _ M N 1 A R C _ R S 0 0 0 5 2" i dont know how to interpret this file sysyinfo.txt with that data. my question is how can i downgrade to wm5 and original bl of hp rw6815? i have all files in nbf form. The onli soluton to the problem if ur phone restarts after rom upgrade downgrade on witn wm 6.5 an 1.01 bl is the atrached rom.. workin 6815-camera-patched-R3.zip is the only rom... located here http://forum.xda-developers.com/showthread.php?t=360664 second post under orher roms
6815 camera patch may work version r2: http://www.mediafire.com/?lihy0vcvnxd
6815 camera patched version R3: http://www.mediafire.com/?2mjhtgjox0x
This roms get ur phone alive after this bug... or the restar bug... they work with both 1.0.1 bl and 1.0.5 bl more stable with 1.0.1... and i thing the developer of the rom did not change the indentifier of the rw6828 rof for 6815... i think it;s hybrid rom between... it works.
Plese help me to downgrade to original state... hp rw6815 bl 1.0.5 rom wm5. or help me solve the hpruu problem... not patched for model and lang beacouse it says the same incopatible thing.. the picture is the same result in patched and original ruu.. .
me too
i got that same problem i dont know wahta to do help guys
bootloader missing after Upgrading to wm 6.5
Hi Dear, i had the same problem but the solution is so funny.
1. Remove Battery from your mobile.
2. Remove SIM card too.
3. Wait around 5 min. & put them back again.
4. Everything should be OK
I hope Problem solve like me , But realy i don't know why ??? .
Best regards, Jalal
I tried to flash the 6815 is here and I have put my diskimg.nb0 on 2gb memory card. Press the 2 buttons with the "-" and give it to reset with a stick ... I get into the bootloader and returns to the screen while windows. It might be because the bootloader has the pda is 1.0.5??
The problem is that trying to change the bootloader 1.0.1 is here and not working because my pda is Spanish.
How can I reduce it?
Dear SHKUMBIN,
I am very grateful for the clear and beautiful explanation, which indicates that a great effort and considerable experience and also " NHOCBANME " and " ARIEY " for the great job they do to bring those custom rom's.
Accept my greetings.
karamzak