Related
BoxWave's new Desktop Cradle for the Cingular 8125
Check it..........
http://www.boxwave.com/products/desktopcradle/cingular-8125-desktop-cradle_1053.htm
But cannot...
Still can't charge a spare battery. Wonder why they aren't making one that can charge a spare battery espcially when battery power is such an issue with this phone! :evil:
Still no spare battery charger:
http://shop.brando.com.hk/dopod838usbcradle.php
Here's another source for the horizontal cradle:
http://www.thepocketsolution.com/Me...reen=PROD&Store_Code=PS&Product_Code=PSI-9219
Anyone have any experience with this or the vertical one? Pros, cons?
Paul
Vertical cradle
I just purchased a vertical cradle from an outfit in the UK (Hamill Dist.) but haven't received it yet. I based my decision on a favorable report from HTC Wizard Web (http://www.htcwizardweb.net/node/510). The Ebay unit looks identical, and I figured it wasn't rocket science and basically a plastic holder with USB connector at the bottom.
I'll report back when I receive it and test it out.
Vertical cradle
I just purchased a vertical cradle from an outfit in the UK (Hamill Dist.) but haven't received it yet. I based my decision on a favorable report from HTC Wizard Web (http://www.htcwizardweb.net/node/510). The Ebay unit looks identical, and I figured it wasn't rocket science and basically a plastic holder with USB connector at the bottom.
I'll report back when I receive it and test it out.
I bought
the boxwave vertical cradle and have been using it for a couple of weeks. Not a bad design, but could be better. Needs a spare battery slot. Also, the mini-usb connector is sort of long and you have to be carefull when putting the phone in and out of the dock. I'm afraid I might break it off in the phone at some point. Nothing like that has happened yet, but it just doesn't feel bullet proof.
I'm using an old Rolodex card holder with my sync cable as a horizontal cradle...works absolutely great! The 8125 happens to be a near-perfect fit when oriented horizontally. Pulled it our of my office's back room right before it was going in the trash...
http://www.arsmar.com/emporium/IMG/c07a-Rolodex-2.jpg
I am using the Boxwave one. Here are my thoughts:
1) I also am using the FlexiSkin. The 8125 does fit with the skin on, but you have to remove the cradles clear plastic support piece (or just leave it off to begin with).
2) Connection - the power part charges easily, but the sync part takes a little more wiggling/time to work than I am used to with the OEM USB cable. I am not sure if it is because of the FlexSkin, the cradle or what...I'll test it out.
3) Design. It is light, and you have to operate with 2 hands to put on and remove. My sync cradle for my old Casio E125 had this lift button to remove the device easily, and I wish this did.
4) Bottom is covered. If you plan ahead, no biggy. I just keep a spare stylus by the cradle because I kept forgetting to remove it before syncing. You may also want to have your bluetooth headset ready, because answering the phone is a little awkward (whether removing the device, or using speakerphone). No way to use a wired set - the plug is covered.
Cradle and spare battery charger
I found a cradle charger that has a spot for a spare battery on Amazon.com I recived it a few days ago and so far so good. Nice to have two batteries
peraltah said:
I found a cradle charger that has a spot for a spare battery on Amazon.com I recived it a few days ago and so far so good. Nice to have two batteries
Click to expand...
Click to collapse
A link would be nice....
Is this the one?
Cradle/Spare Battery Charger for Wizard
blazoner said:
A link would be nice....
Is this the one?
Click to expand...
Click to collapse
Yes sir it is. It works really well so far
Peraltah:
Does it come with that extra battery as well, or just the charger?
KarmaNP said:
Peraltah:
Does it come with that extra battery as well, or just the charger?
Click to expand...
Click to collapse
Just the chargers. It comes with a usb cable to attach it to the computer and a normal american outlet charger. If you buy them off of ebay I remember seeing one that comes with a battery. I dont trust the battery that it comes with though I rather just spend the extra cash and be sure of the quality of the battery. Hope this helped
Peraltah,
Thanks for the info. I did order one and I think from what I read one 1100 mah non OEM battery comes with it, will see when it comes to me. See the link below in the product features.
http://www.amazon.com/o/ASIN/B000IHNBOW/ref=pd_rvi_gw_1/103-6458678-6693459
KarmaNP said:
Peraltah,
Thanks for the info. I did order one and I think from what I read one 1100 mah non OEM battery comes with it, will see when it comes to me. See the link below in the product features.
http://www.amazon.com/o/ASIN/B000IHNBOW/ref=pd_rvi_gw_1/103-6458678-6693459
Click to expand...
Click to collapse
Damm your right man! I didnt get one! lol I will email them right quick. THANKS!
Ok I checked the item mine was like 17 bucks the one with the battery is like 30. I already started *****ing to the people till i looked closer! lol
Check out this NEW one:
http://www.amazon.com/Cingular-Smar.../B000K8ET6S/ref=pd_sbs__2/102-2837548-9417744
repsol47 said:
Check out this NEW one:
http://www.amazon.com/Cingular-Smar.../B000K8ET6S/ref=pd_sbs__2/102-2837548-9417744
Click to expand...
Click to collapse
But it doesnt have the spare battery charger
that would have been a nice addition.
I've just got an ok one from ebay, it doesn't have room for spare battery unfortunatly, but comes with built in usb cable and also a charger so you can have both plugged in, so when pc is on it will charge through usb and when off will charge from mains,
http://cgi.ebay.co.uk/O2-XDA-Mini-S...DVWQQrdZ1QQcmdZViewItem?hash=item300064799786
check out these. for this price you could charger 13 spares.
http://cgi.ebay.com/FOR-T-MOBILE-MD...ryZ20368QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
zc57 2X Battery+Charger For HTC Wizard 838 100 200
Are there any usb-dockingstations for the tytn available? Where in Europe? How much?
mamusp said:
Are there any usb-dockingstations for the tytn available? Where in Europe? How much?
Click to expand...
Click to collapse
Have a look at
www.expansys.at
But their shipping policy is a bit weird.
here you go:
http://shop.brando.com.hk/dopodcht9000usbcradle.php
TyTN usb docking cradle on eBay now + cases too
http://cgi.ebay.com/HTC-TyTn-Metal-...2689586QQihZ005QQcategoryZ75430QQcmdZViewItem
[email protected]
This guy has a cradle at 11 euros in hong kong he also sells trough ebay.
With tranportation I got my for about 22 euros.
Regards,
Be advised that the cradles offered by eXpansys, Brando, and others lack both external AC power and a spare battery charging slot.
I bought one from eXpansys based on bad information, and I'm pretty much stuck with it (it's not worth paying the shipping to send it back for what I would receive as a refund).
The lack of external AC means that if you shut off your computer, you also shut off charging.
The lack of extra battery slot, well, that's just a huge PITA!
goestoeleven said:
Be advised that the cradles offered by eXpansys, Brando, and others lack both external AC power and a spare battery charging slot.
I bought one from eXpansys based on bad information, and I'm pretty much stuck with it (it's not worth paying the shipping to send it back for what I would receive as a refund).
The lack of external AC means that if you shut off your computer, you also shut off charging.
The lack of extra battery slot, well, that's just a huge PITA!
Click to expand...
Click to collapse
It might be worth getting a power adaptor with a usb output. I received one with my fortuna clip-on gps. Along with my usb car adaptor, this means I just need a usb mini cable to use all power options, and also to sync the phone.
ie keep the adaptors where you need them, and just carry the usb mini cable around. It turns out this is a much tidier charging solution than I ever managed for my old p900.
Also, Be adviced that USB charging is way SLOWER than AC Adaptor Charging!
If you have doubts, record the time it takes to fully charge a battery or simply check the differences between the heat it makes when u connect to a USB charger and AC charging(which is HOT)
I got a dock from ebay - like the expansys ones (etc) it only charges through the USB on the computer. However, this suits me as most of my day is in front of the machine and even when off (as I use a docking station) the USB is still powered and hence charges the TyTN.
Wrote a small review here: http://rakh1.homeip.net
Rich
Rich, is it possible to plug in the Tytn charger cable into the back of the cradle and use it as a stand-alone charging station ?
I have the brando one, and I can use it via USB charging or by ac power.
Its uses the same connector in the back
Finally received mine today (the Brando/eBay one).
For some reasons, it syncs much slower than just using the USB cable??? :?
And the bright blue LED is constantly on... which is a bit annoying.
tytn cradle I had it.
http://cgi.ebay.com/HTC-TyTn-Metal-...ctor_W0QQitemZ150032689586QQihZ005QQcategoryZ 75430QQcmdZViewItem
thanks
I had a blue angel (Qtek9090) and it came with a cradle which recharged the Blue Angel and a spare battery.
Does anybody know of such a device for the TyTn?
How is one supposed to recharge a spare battery otherwise?
I ordered the ORA charger from eXpansys for my TyTN a month ago. It FINALLY arrived today, and it DOES NOT charge an external battery. It's just an upright stand with power for the TyTN and draws its power from the USB port (no external AC connection).
I must admit that I'm more-than-kinda disappointed about this!
Bought one of these...
I bought an OEM cradle for the XV6700. I discovered the XV6700 uses the same battery as TyTN, so the battery charging slot works perfect. You can't use the cradle to sync/charge the phone itself, but at $24.95, it works for me as a spare charger. I've used it to charge the OEM battery as well as the Mugen Power 1500mAH that I bought (again for the XV6700) -- both charged correctly.
http://www.wirelessground.com/utppsycrandm.html
Mark
sweet, thank you, I also was looking for a charger for a stand alone battery.
Although this is pre-order at the moment , but hope this help:
http://www.mobileplanet.com/product.asp?code=140292
for people in the UK
http://www.expansys.com/product.asp?code=140292
Hi,
I am having trouble with my StarTrek. It is pretty much unused, bought it straight when it came out but only used it for 1-2 months because I then got a phone from work. I reciently tried to start using it again just because I was a bit bored. But the phone refused to start, I originally thought it was the battery so I ordered a new one and got it. Phone started up straight away when I put it in as it came precharged at 40%. But the phone refuses to charge when I plug the USB cable in. I get no LED light or indicator in WM5 that it is charging.
So I checked the USB cable with a multi meter and there is defiently 5v being supplied. I opened up the phone and measured the board when the charged was plugged in, I found both 5v points and ~3.7-4v points on the board. The positive point of the 4 connectors which connects to the battery outputs 1v when the battery is plugged in (~0.3v when no battery is plugged in) so it would appear that the battery is charging right? Or should I be seeing 3.7v here?
charging issue
these phones are notorious for the micro usb connector to come loose from the main board, once it does there is nothing you can do with it.
My advice is if you plan on keeping the phone by a dual charger off of eBay for about 20 bucks, it has a built in battery charger, then you can simply swap out your batteries as you should now have 2 good batteries cause my guess is that your original battery is still good.
other possibility is to buy a trashed 3125 (bad lcd, etc) off of eBay and hope that you get one with a good charging port and board, then swap out the board, fairly easy swap.
I ended up buying one of the £70 new pink qtek 8500 from expansys and then I took off the black cover from my old one and swapped with the pink one. I now have a phone to play with wm6.1
Magnetic USB Charging Cable, some one will try it?
http://dx-box.com/high-performance-...e-magnetic-connection-and-charging-speed.html
I will not touch a third party charger. I want to buy the DK30/Dk31 dock and take it apart for the EC21 cable but I'm not sure if its compatible? Does Somebody know maybe?
The page doesn't load for me, but I'd trust the microUSB -> Magnetic convertors over the entire charger. That way you can use the OEM charger or another high quality charger.
A lot of brandless chargers are made lower quality and that can lead to issues where phones "explode". Odds are, whenever you read about a person's phone exploding they were probably using a knockoff charger.
The adapters shouldn't be a problem. It's just a simple wire-to-wire exchange. No circuits.
Something like this
http://www.amazon.com/Magnector-Per...1144360&sr=8-1&keywords=magnetic+charger+sony
EDIT: I got a kick out of "Reverse Attachment Charging Protection", because the charging holes are just different sizes.
My Z1 magnetic charging cable works although it is a tad more easy to dislodge compared to when I was using it on my z1
I have THIS http://www.clove.co.uk/microusb-to-magnetic-connector-adapter and I must say it doesn't work perfectly. The adaptater doesn't 'grip', it stays in place only if you put you Z3 down.
jonshipman said:
A lot of brandless chargers are made lower quality and that can lead to issues where phones "explode".
Click to expand...
Click to collapse
OF COURSE. There are phones exploding just everywhere; you just cannot leave the house without ear protectors because there's exploding phones all around you.
Honestly; I am so sick of reading that "exploding phone" stories over and over. Same with stolen kidneys and similar paramountly believable urban legends.
Is this the charger wich comes with z3 in box ?
Quick Charger EP881
I cant find spec for this,is this the 2A or 1.5A ?
fain2daniel said:
Is this the charger wich comes with z3 in box ?
Quick Charger EP881
I cant find spec for this,is this the 2A or 1.5A ?
Click to expand...
Click to collapse
believe its 1.5A based on the same code found on other sony country sites.
http://www.sony.com.sg/product/ep881
however, lazy to check if its the same model that comes with the Z3 although i believe it should be!
This is the one my Z3 came with. T-mobile Netherlands model.
^
This is 2.5A fast charger wich is great.How much time it needs to 100% charge the battery?Im geting mine tomorrow,hope that comes with same charger.
I'm pretty sure it is 1,5A. Charged my device only once with it and I was surprised with the speed. Will do a timed run next time round.
fain2daniel said:
^
This is 2.5A fast charger wich is great.How much time it needs to 100% charge the battery?Im geting mine tomorrow,hope that comes with same charger.
Click to expand...
Click to collapse
the picture clearly reads 1500mA and that's what it is. This charger was included with my z3 as well.
2.30h to fully charge the batery with original 1.5A charger.Its not so bad.
EP880 is 1.5A, and is what came with my Z3. I'm intrigued to know what the 881 is.
In fact, given its support of Quick Charge 2.0, I am hopeful of Sony releasing a new PSU that can detect a QC2 compatible device and up the power further. So far I can only find one from Motorola and it's not on sale outside the US (that I can see).
Hi All,
Thought I'd give my review of two different magnetic cables I've purchased from my Xperia Z3.
Firstly, I purchased a £3 magnetic cable from Ebay which was utterly a waste of money! Soon as you picked the phone up or touched it the connection port would move up or down. I contacted the seller who is sending me a replacement so will see if this is any better.
Now on to the more expensive magnetic cable but with a twist.
This magnetic cable I purchased from Amazon had great reviews from previous Z2 users. Now I wasn't sure if it was Z3 compatible but turned out the ports are the same for Z2 and Z3. So I purchased the item from Flubit as you get a little discount if they can get a deal for you and it arrived within 2-3 working days.
Item name: [ Magnector X ] High Performance Universal Sony Xperia Z1 & Z2 & Z3 Charging Adapter for Micro USB Cable - Enhanced Magnetic Connection and Charging Speed [ Black ]
This product felt more durable and solid when taking it out of the mildly fancy packaging. The product itself isn't connected to a cable but has a micro usb port which you attach your original Sony cable to. (unfortunately I need 10 posts before i can show pics but just check it out on Amazon. I tried it for the first time last night as my phone stays next to my pillow and it seems to do the trick as it didn't fall off even with my cheapy case attached to it in the morning.
As the saying is, buy cheap...buy twice! Hope this review helps anyone on making a decision between the cheap ones and expensive ones.:good:
figo_rulz11 said:
Hi All,
Thought I'd give my review of two different magnetic cables I've purchased from my Xperia Z3.
Firstly, I purchased a £3 magnetic cable from Ebay which was utterly a waste of money! Soon as you picked the phone up or touched it the connection port would move up or down. I contacted the seller who is sending me a replacement so will see if this is any better.
Now on to the more expensive magnetic cable but with a twist.
This magnetic cable I purchased from Amazon had great reviews from previous Z2 users. Now I wasn't sure if it was Z3 compatible but turned out the ports are the same for Z2 and Z3. So I purchased the item from Flubit as you get a little discount if they can get a deal for you and it arrived within 2-3 working days.
Item name: [ Magnector X ] High Performance Universal Sony Xperia Z1 & Z2 & Z3 Charging Adapter for Micro USB Cable - Enhanced Magnetic Connection and Charging Speed [ Black ]
This product felt more durable and solid when taking it out of the mildly fancy packaging. The product itself isn't connected to a cable but has a micro usb port which you attach your original Sony cable to. (unfortunately I need 10 posts before i can show pics but just check it out on Amazon. I tried it for the first time last night as my phone stays next to my pillow and it seems to do the trick as it didn't fall off even with my cheapy case attached to it in the morning.
As the saying is, buy cheap...buy twice! Hope this review helps anyone on making a decision between the cheap ones and expensive ones.:good:
Click to expand...
Click to collapse
I also just got this cable through today and its fantastic.
Avoid the cheap ones.
Got one first thing Monday morning via Amazon and super impressed because I ordered it at 6.55pm on Sunday night!
http://www.amazon.co.uk/gp/product/B00H2EEB4S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I got mine from Amazon (Prime) but there was only one in stock and I got it, so now it's showing from another supplier.
It's great! I had two unknown Chinese-made ones before, and both struggled to stick to my Z2 or Z3, causing all sorts of weird issues (mostly that of what it would be like to attach and detach the lead repeatedly). They're now history.
So far this is clamping on so solid that there's no chance of that happening, and I always 'rotate' the magnetic chargers off so no chance of pulling out the connector.
I also got the official dock, but at £20-odd at a time (and I now have a mountain of docks because all I need are the inserts, not a new dock for each phone) I will probably get one or two more of these. The dock by the bedside and these around the house and at work.
Hi what's do you mean by rotate to keep it secured?
When taking off I simply fold/twist it back rather than pull it off and risk damage, given how strong the magnetic force is.
I have bought this one on ebay , "Magnetic Charging Dock Cradle Desktop Charger for Sony Xperia Z3 and Z3 Compact" for about 10 euro's (incl sending)
it works nice , you don't need to open the covers each time.