Current Verizon aGPS PDE Information - Mogul, XV6800 ROM Development

Looking through all the posts in the forum, I can't seem to find a recent conclusion on PDE information for Verizon. Thus, consolidation time!
If you have your aGPS working well for a custom ROM (ie DCD 3.2.3 and radio 3.42.50) on Verizon, what are the aGPS registry settings and QPST settings you're using?

---

Panth said:
Looking through all the posts in the forum, I can't seem to find a recent conclusion on PDE information for Verizon. Thus, consolidation time!
If you have your aGPS working well for a custom ROM (ie DCD 3.2.3 and radio 3.42.50) on Verizon, what are the aGPS registry settings and QPST settings you're using?
Click to expand...
Click to collapse
I just actually did this today to get aGPS working again. All credit goes to serfboreds & RyanMogul6800 @ XDA and Shadow-Tech @ PPC
Reverting back PreGPS Verizon if you had MR1/MR2 Stock ROM (If you've already done this skip this step)
QPST & Registry Settings Reference Link
----------------------CONNECTING OUR PHONE TO QPST---------------------------------
1. Run Wmodemdriverinstaller.exe on your PC (This will install the DIAG driver)
2. Click install drivers, wait, once it says completed just close window
3. Install qpst_2.7b215.exe on your PC, next click through it
4. On Phone dial ##3424 , then plug it into USB port, WAIT TILL ALL DEVICES ARE INSTALLED (WAIT A GOOD 60 SECONDS)
5. Open Windows Device manager (right click on My Computer, click 'Properties', Click 'Hardware' Tab, 'Device manager' Button) on PC
6. Expand the item called 'Ports (COM & LPT)' on PC
7. Look for an item called 'HTC Diagnostic Interface' record what COM PORT it is. (see PIC below) Your COMM Port may not be the same.
8. On PC click start\All Programs\QPST\QPST Configuration. Click 'Ports' Tab. Click 'Add New Port' Button in lower right.
9. Click on the Device with the same COM port from as the 'HTC Diagnostic Interface' then click OK. (You may need to manually enter it. use COMX, i.e. COM6. description is COMX, i.e. COM6) see pic
10. Click 'Active Phones' tab. click 'Start Clients' drop down, then click 'SERVICE PROGRAMMING'
11. Click 'OK' in 'Phone Selection' window (code is 000000) see troubleshooting if it fails
----------------------------------------------------------------------------------------
-------------------------APPLY THE FIX-------------------------------------------------
1. Click 'Read from Phone' button in bottom left corner
2. Click 'Save to File...' button don't change name and save to your desktop. (just to have a backup)
3. Scroll over to 'gpsOne' tab (upper right corner)
4. Click all the check boxes on the left hand side so they are all blank. (all 9, See pic)
5. THEN Click all the boxes so they are checked. (all 9) (yes it's strange)
6. At 'PDE IP Address' enter: 216.198.139.92 -
7. At 'PDE Port Number' enter: 8889
8. At 'PDE Transport' select: IP
9. At 'Position Calculation' select: mobile
10. Click 'Write to Phone' (lower left corner)
11. Once completed, enter ##3424 on the phone again
12. Tap exit, then 'Yes' button on the phone
13. Unplug phone and soft rest
14. Exit QPST. DO NOT SAVE CHANGES
----------------------------------------------------------------------------------------
Installed Telus aGPS cab (or do it manually in the registry)

---

Which WModem Driver are you using? I have 1.2.1.1 2007.03.07 and it just kind of auto-installs and says it is done, but plugging the phone in after that doesn't present an HTC Diagnostic port in device manager. No devices with a bang next to it, everything is installed.
Dialing ##3424 just gives me a "Your # cannot be dialed at this time..." message. I'm running the 6.5 21501 build right now.

---

Diag mode
scorp508 said:
Which WModem Driver are you using? I have 1.2.1.1 2007.03.07 and it just kind of auto-installs and says it is done, but plugging the phone in after that doesn't present an HTC Diagnostic port in device manager. No devices with a bang next to it, everything is installed.
Dialing ##3424 just gives me a "Your # cannot be dialed at this time..." message. I'm running the 6.5 21501 build right now.
Click to expand...
Click to collapse
Hey,
Did you try "##3424#" ? On my Qwest Moguls, That is what works. Also, did you install your carrier cab file? Sometimes I need to run the program from the exe file in the windows folder.

---

Yeah the carrier works, everything on the phone does except sat lock takes forever the first time like it did before my initial QPST modification so I'd like to redo it. I'll try ##3424#. Thank you.

---

Not all dialers in custom roms support ## codes. So you might have one of the bad dialers. Ask the rom cook or find a new dialer.

---

I'm using the Telus IP on Verizon and it seems to be working fine.

---

Panth said:
Looking through all the posts in the forum, I can't seem to find a recent conclusion on PDE information for Verizon. Thus, consolidation time!
If you have your aGPS working well for a custom ROM (ie DCD 3.2.3 and radio 3.42.50) on Verizon, what are the aGPS registry settings and QPST settings you're using?
Click to expand...
Click to collapse
I'm using the 6.5 rom from BBSandKM, version 21728. I have been using some of the 6.5 roms from earlier builds as well.
In QPST my settings are:
PDE IP ADDRESS: 66.174.95.132
PDE Port Number: 8888
PDE Transport: IP
Position Calculation: mobile
I use the same IP address & Port # in Reg. Settings. I set GPS Mode to 2.
I have no problems getting locks in under 30 seconds. Sometimes in less than 10 seconds.
Good luck.

---

JimmyGene said:
I have no problems getting locks in under 30 seconds. Sometimes in less than 10 seconds.
Click to expand...
Click to collapse
Same here. Only I'm using GPS Mode=4. I've also noticed that if the QPST settings are good you dont need to do anything in the registry (unless you have to fix or delete bogus settings). A vanilla ROM like tplane37's 21501 + QPST works right out of the box.

---

I resorted to opening dmrouter /diag since ##3424 wouldn't work.

---

scorp508 said:
I resorted to opening dmrouter /diag since ##3424 wouldn't work.
Click to expand...
Click to collapse
Did you try ##3424#? That worked for me.