Wifi no longer visible after 6.5 - Mogul, XV6800 ROM Development

I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?

Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.

Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW

I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.

So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.

I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!

For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.

SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.

RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.

I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.

ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.

Related

Tethering problem anyone?

Hi all
i am having problems internet sharing. i have an unlimited data plan and my mogul was connecting my laptop yesterday. it has just stopped and i cant get it back! anyone else having the same or suggestions?
thanks in advance.
me to
Same exact thing i have reflashed reinstalled changed adhoc network names everything even reg usb connection have gotten it to say internet was good but wouldnt actually transfer my only question is if you are on the new gps radio and rom because the issue started a couple hours after i went to new rom i am wondering if sprint built in some way of checking on tethering into new radio and rom if so this sucks and i dont want gps anymore
I have dcd's 2.2.0 with 3.27 radio. I do not know why it has happened. I cant seem to find solutions anywhere.
I had issues with this after awhile as well...I think it may be Verizon killing tethering access from their side of things....
I solved it by buying a copy of PDANet...
Works like a charm and even better than the standard tethering methods.
does pda net work with wifi and i have sprint and last but not least hopefully we dont get charged
Well I just got a trial of PDAnet and it works. I am going to do a speed test to see what I am getting. Hopefully no charges with sprint.
KiwiPike said:
Hi all
i am having problems internet sharing. i have an unlimited data plan and my mogul was connecting my laptop yesterday. it has just stopped and i cant get it back! anyone else having the same or suggestions?
thanks in advance.
Click to expand...
Click to collapse
are you able to connect w/ activesync??? i cant even sync my contacts
I am having the same problem with my touch also I just tried connecting with internet sharing yesterday it says connected and the laptop gets an ip and connects but it won't go anywhere on the internet not sure why this is happening
Same here...it will conect but won't do anything
I am able to connect with activesync. I had to make sure that i had enable/use USB connections checked. I reinstalled activesync and restarted the pc and softrest my ppc and I have not had a problem since. I was unable to get anything using internet sharing, but I am on my laptop right now using pdanet. Ran a speed test and getting 1.1MB/sec down 532kb/sec up.
what i dont understand is if this is related to the new rom or if sprint just started trying to do something so it disabled the regular internet sharing and also want to know if pda net works wirelessly
I just tried to tether with my Mogul on Sprint; it seems to be working without issue. I used the internet sharing app on the Mogul.
I'm using DCDs 2.2.6 ROM.
Try #1
i'm not an expert but for what its worth this worked for me when i had that problem...
Solution #1
Open internet explorer in ppc
Open internet sharing
Connect phone to pc
Solution #2
You will need a reg editor
goto HKLM/Comm/InternetSharing
and delete Extension with the data tag as rilphone.dll
restart the phone and enjoy...
but please make sure u back ur registry up or remember this post to go back to it so if its messed up u can place that value back and FYI its a REG_SZ type value.
Solution #3
Try #2 then #1
AtOMiiX
-CiiO kUrWa
PDA Net will work with any method you can connect to Activesync with...
I have never tried to get it to sync via Wifi...
And didn't have a lot of success with Bluetooth either...
PDA Net also works with WMDC. All it really requires is for the phone to be connected to sync and it will work.
zaxdude said:
I just tried to tether with my Mogul on Sprint; it seems to be working without issue. I used the internet sharing app on the Mogul.
I'm using DCDs 2.2.6 ROM.
Click to expand...
Click to collapse
the problem is stay connected for a couple hrs and see if you can keep connecting
mastachillz said:
the problem is stay connected for a couple hrs and see if you can keep connecting
Click to expand...
Click to collapse
I wouldn't be a good person to test this out then....I don't think I ever tether for a couple of hours at a time...
atomiix said:
i'm not an expert but for what its worth this worked for me when i had that problem...
Solution #1
Open internet explorer in ppc
Open internet sharing
Connect phone to pc
Solution #2
You will need a reg editor
goto HKLM/Comm/InternetSharing
and delete Extension with the data tag as rilphone.dll
restart the phone and enjoy...
but please make sure u back ur registry up or remember this post to go back to it so if its messed up u can place that value back and FYI its a REG_SZ type value.
Solution #3
Try #2 then #1
AtOMiiX
-CiiO kUrWa
Click to expand...
Click to collapse
dcd rom already has this deleted
you have to close activesync for wmwifirouter that seems to be working and i changed max cm retry to 5 from 0 in the registry key referred to before
nevermind something weird going on if i start a secured connection in my browser then i can stay on that site if i switch to the adhoc connection but i cant even go to google. ex log on to xda and switch to wmwifiroyter and keep browsing posting whatever but cant go to any other site.
i think this is a win 6.1 issue only
Try a differant computer, I can tether just fine with my laptop, but I have problems tethering with my decktop pc. It might be a windows XP issue

Radio And Wireless

Ok so I have dcd. 3.2.6 and Radio 3.42.50 but for some reason I cannot associate to any wireless network. Even with the correct information. Any ideas? It just keeps trying to connect with no success.
JukEboXAuDiO said:
Ok so I have dcd. 3.2.6 and Radio 3.42.50 but for some reason I cannot associate to any wireless network. Even with the correct information. Any ideas? It just keeps trying to connect with no success.
Click to expand...
Click to collapse
Wireless as in WIFI? Using the switch on the side?
Re: Radio and Wireless
I am also encountering a similar problem. If I stand next to the access point and try to connect to the AP, it fails or it connects but I can't connect to the internet(PIE always can not load page).
I changed the encryption from AES to WEP to no avail. Even went so far as to re flashing 3.2.6. I am also using the same radio as you.
Hopefully someone can shed some light on this problem.
Thanks,
Ed
I would take off all WEP and encryption and try to connect with it as a open WiFi. If you still can't connect then you have some other issues either with your WAP or maybe still with your phone. Then if it does connect then add the WEP encryption back on. You may have to change the type of WEP to one the phone supports. I just use MAC filtering so no one else can get on my wireless but scanners can see what is being passed around on my wireless. (mostly teenage girl stuff, I think a scanner would get bored really quick) LOL
nitro66215 said:
Wireless as in WIFI? Using the switch on the side?
Click to expand...
Click to collapse
Yes using hte WIFI on the side.
JukEboXAuDiO said:
Yes using hte WIFI on the side.
Click to expand...
Click to collapse
you do have the switch turned on, on the side of the phone and then go into the comm manager and at the bottom go into the Wireless LAN settings.
You might need to refresh or manually create the connection if your WAP doesn't broadcast its SSID.
I've been having problems with wi-fi too, mostly since my upgrade. I am on dcd 3.25 and radio 3.42.50. I can usually connect ok, but then either I can't connect to any web sites or I can surf for a few minutes and then it stops (although still shows connected). Since so many are on these (ROM and Radio), I am doubting that is the issue. It did work better on the prior versions of both, but again if not effecting others don't see how that can be the issue. Hopefully it is not a hardware issue since this is already my second phone (power button caved in on the last one, not much quality there). Any ideas?
Thanks,
Fletch
Fletchxda said:
I've been having problems with wi-fi too, mostly since my upgrade. I am on dcd 3.25 and radio 3.42.50. I can usually connect ok, but then either I can't connect to any web sites or I can surf for a few minutes and then it stops (although still shows connected). Since so many are on these (ROM and Radio), I am doubting that is the issue. It did work better on the prior versions of both, but again if not effecting others don't see how that can be the issue. Hopefully it is not a hardware issue since this is already my second phone (power button caved in on the last one, not much quality there). Any ideas?
Thanks,
Fletch
Click to expand...
Click to collapse
Do you have anything else using your WAP? Just sounds more like your access point then your phone. I had a wireless router that would do that with any wireless device so I had to get a new one.
Unfortunately, there are 2 computers in my house that work fine of the router. It is also happening when I try to connect to wi-fi at work. I've also noticed that sometime it just won't connect. I am in the same room as the router now and it won't even register it. Doesn't even look that hard...searches for 2 seconds and stops. Very strange.
yes the switch is on and enabled in comm manager. It finds signals but can not connect to any of it.
You guys might want to try WiFiFoFum (should be around here somewhere) It will show all the WiFi APs and even use the GPS to log them. If they don't register there, then I would say try flashing the Radio and DCD's ROMs again. The only issue I had with WiFi is it wouldn't turn on with the hardware switch and I swapped out the phone.
Thanks, I'll give it a try....
Fletcher,
I've got the exact same problem. When I leave my AP open, it connects and stays connected. As soon as I switch over to WPA-PSK AES with an 8 character key, I get the symptoms that you describe. I can get to about 2 pages in PIE and then it takes a dump.
I'm on DCD 3.2.6 and radio 3.42.50. I don't have a solution, but at least wanted to let you know that you're not alone. It has to be something software related. I have a bunch of other clients that connect no problem with the same settings: PS3, Wii, laptop, PSP. I LOVE DCD roms, but may have to switch if I can't figure something out.
I am still having trouble connecting. It can see signals but not connect to any of them.
Tried wififofum. It sees the AP's and I can sometime connect. But no matter what it drops the connection within a few minutes. Then it won't reconnect or see any ap's (only looks for about 5 secs then stops). If I leave the switch off for a while and then try again, I can do the same thing all over again.
What do you think? A setting, a reg setting, broken phone? Thanks to any and all.....
-Fletch
Not sure if this helps, but I noticed that when it drops the internet connection (after 3-5 minutes), that when I look at WIFIFOFUM it still show the AP. A few time, it showed that the AP was no longer available, but the graphic at the top still shows connected by the phone. It seems like a software or hardware problem with the phone, but I'm not sure which. Anyone have any ideas? Thanks.
-Fletch

Bluetooth Pan on Verizon XV6800 & Leopard Mac

Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
I've also tried a few registry edits, and used all variations of modem scripts, and got all the dialup info from verizon directly (so I know it was right ) but could not get dialup to work either. Usually not detecting a carrier, other times lockups.
I truely want to get the bluetooth-PAN working again as it did on my tilt. Anyone have this working on the MAc with a XV6800 on verizon?
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Cycomachead said:
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Click to expand...
Click to collapse
As mentioned, I have tried a ton of different methods to try and use the data connection, from using dialup settings, to trying to get the Bluetooth Pan working. I've removed and re-paired the device from my mac, flashed roms, hacked away at the registry a ton of times. Nothing seems to give so far.
I've got one more suggestion, found here: http://forum.xda-developers.com/showpost.php?p=1794133&postcount=29
I'm going to give this a shot tomorrow and will let you know how it goes.
Eponymous069 said:
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
Click to expand...
Click to collapse
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
thetaz01 said:
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
Click to expand...
Click to collapse
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Eponymous069 said:
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Click to expand...
Click to collapse
hey, ok great, i just downloaded the file, Just one question..
The file i downloaded has about a page of Reg Key changes, you didnt mention that in your "thngs to do"
Just want to see if i am to make all those changes or not.
thanks
So, your problem is in getting the internet connection to work and not connecting it to the mac, right? Does your mac recognize the phone as a modem?
If you're using MR1 I think you might need to hard reset and the soft reset right before the Verizon customizations run. You won't be able to run their apps but there won't be software to cripple the phone.
i have the same exact issue i have a new macbook pro and the bluetooth connects however the speed is slower then dial up it works perfectly however on bootcamp apple has to change the drivers
So more results.
I tried all the registry edits, (much easier with CD-Regedit so you can make the changes on your desktop) and now internet sharing does not even allow me to select a connection type, it had worked previously.
The only thing that was missing before I made the registry changes was that when I pair the phone, in the services listed, "Network Access Point" is not one of the listed services. My old phone has this service listed, and this is how I used it, where I started internet sharing on the phone, then selected the bluetooth device (phone) on the mac and selected: "Connect to Network) and it worked flawless.
Back to the drawing board. I'm going to try next to re-flash the MR1 rom and do as Cycomachead suggested and stop verizons customizations from happening.
bryanw17, what were the exact settings you used for dialup on the mac. The modem script used is probably the most important piece.
Number: #777
Username: Phonenumber (or [email protected]????)
Password: (We know this one, not sure if it's legal to post though)
Darn, I wish I could provide more help. It is indeed possible in Leopard, I had it going before I began flashing my phone - and I no longer have a data plan to test, otherwise I'd be using it a lot more!
aparently no one with a new macbook pro can get bluetooth pan to work. I have it connected however the drivers for the new macbook pro do not provide a good connection if you search the mac forums theyve been talking about it on there. I dont use a username n password however because i use the internet sharing app for the moment i am using wmwifirouter to connect online however my xv6800 doesnt charge at the same time for some reason so u can only use it till the battery dies
So some more results.
I installed ICS and all the registry edits. Then the internet Connection Sharing did not function at all. I verified the registry settings, all were fine. So no dice with me.
So back to the drawing board.
I installed a previous rom. DCD 3.2.6, and guess what? From initial flash of the phone and initial setup, no apps installed, no hacking, ICS runs and provides a network connection to my mac perfect. I also instantly notice when I pair it through bluetooth, it allows the option of "Access this device as a network port". And "Network Access point" is listed as an offered service.
I installed newer rom DCD 3.3.4, and the MR1 Rom. Neither have ICS installed initially. I can install the two files: intshare.dll and IntShrUI.exe into the windows directory without any reg edits, and then ICS works on the phone, but then pairing the phone to the Mac, and attempting to discover teh PAN service is unsuccessful. It only is discovered as a Dialup Access device, and not a "Network Access Point".
So, It appears I can get internet Sharing via Bluetooth PAN to function on the phone no matter which rom, but have not figure out how to tell the mac, or trick the mac, into thinking the "Network Access Point" service is available.
I have pulled completed registry dumps with CE-Regedit and compared the differences between the two, which there are quite a few, but not sure how to export these differences with the program so I can apply them to the other roms registry. I guess I might try a fukll backup and then restore to the new(er) rom and cross my fingers.
I'd stay with the 3.2.6 rom. and 3.42.50 Radio, with PRI 2.03, but I can only seem to make the GPS function successfully with the MR1 stock verizon rom.
Anybody want to take the two regs files compare, and see if they can find out where we can make the change to have the phone advertise the service "Network Access Point" when being paired to the mac or PC?
On one last note. I also tried the method of restoring the MR1 official rom, and then not allowing the customizations. ICS will function, but again, not advertising the service: "Network Access Point" when pairing, so it's not recognized as a valid networking method.
Where did you get those files (intshare.dll and IntShrUI.exe) to allow ICS via bluetooth?
Nevermind, I found it on PPCGeeks.
Don't know why DCD disabled the BT DUN on ICS.
I use Missing sync, and I turned on PAN then added my phone and it shoed it as a modem when I added it, but my BT connection is fairly Unrealible compared to the USB teather on Bootcamp
i was under the impression that bt pan has been whacked on macbook pro models starting from early 2008 on. anything earlier than that and it seems to work great. does anyone know why bt pan doesnt work on the newer machines and how to get it to work?

HELP/Alert! New ALLTEL versions wont do wifi!?!?

This really really pi##es me off, as where I live I get 1x data, & usually use my home wireless (wifi).
Recieved the pro, and activated it. It seems disabled by being activated by alltel. I even stumped the blackberry adept person at the local store enough that they switched out the phone, I walked to next door (motel) used the free wireless (to prove the wireless would even function) then let him activate it and headed home (30+ miles into the wilderness). got home and again I cant get Crap wifi to work.
Home is wireless b, it connects, can be seen on the 'simple' 2 wire wireless appliance but the PRO, will not see or try to send data through it. turned off security and everything on the wireless for testing. I can check, but I know the pass for the motel, and I could try again, but am definitely sure that this AINT the issue--> again the phone wouldnt connect at the motel (least not the pre exchanged one) with me or the rep at Altel either, while it was activated and on alltel.
who to call? Any help out there?
my 6800 will still wifi, at anyplace there is a signal and that I know the passcodes or is open.
yes I asked this, at alltel-howard forums, but would think you guys here know more (on second thought, when I remembered about all the stuff you do here, I know I probably should've posted here 1st, but Im kinda mad at the moment!)
Pretty adept at computers, I do IS as my real job, anything I can do to help trouble shoot? yeah the 6800 has been flashed & I even noobed around with cooking a few time. appreciate any help you guys
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
goonygugle said:
i Have a touch pro and a touch diamond, both under 2 weeks old and the wifi works fine with both of them, maybe you should try a custom rom and see if they changes anything. but there is no reason it shouldnt work with the stock rom
Click to expand...
Click to collapse
goony,
Is it an Alltel? are you positive that wifi is working, not the "data" connection with alltel towers (cell call)? My proof is that if I goto my basment, I have no cell service so not any data connction, ONLY WIFI (that is where my wireless router is. that is when I found out the 1st time. Everything else looks right, on the phone it says it is connected, on the router I can see it on the connected devices list.
I have my issue that I believe, that it is some setting that Alltel is setting... like I said the phone would connect via wifi until the phone activated. When I activated (full unlimited data package is on this phone) the phone fully rebooted on its own, 3 times as if getting updated via data plan. Im not talking about the 1st time turn on customizations, those were done before I tested the wifi at the motel lobby... For instance, the volume control buttons - the display app were obviously modified, I am not positive what else was.
I'd LOVE to try custom rom, if I wasnt right in the period of time I can get my money back, or not. after that I will...
yes they are alltel, and to test the wifi i just connected it to my router and then turned of my alltel data and it stayed connected so i am positive the wifi works. you can still use a custom rom under your return period, if you want to return just relock it.
I wanted to double check myself sting to make sure i was realy getting wifi, so i connected and went to speedtest.net and did a speed test and sure enough it showed my isp as roadrunner(my home provider). Have you had this problem with multiple phones? are you checking the internet option when it connects? and do you have it diconnected from the pc? my wifi wont work on my diamond hooked to a pc.
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Sweeny Russ said:
Has nothing to do with alltel. Maybe with the rom or the phone. Now I hope you're not waiting for a pop up to show itself on the main screen asking if you want to connect because you could wait forever. Go to comm manager enable wifi/ go to start->settings->connections->wifi and make sure options are set to "all available." If you can even see wireless networks on the list, the wifi is functioning correctly and there is a router settings conflict. If you don't see networks on that list in wifi, then there is a rom/hardware problem.
Click to expand...
Click to collapse
Hey thanks!
But, it is the Stock shipped rom, I have my HTC 6800 right next to this one, connected and surfing the web, both show up when in the home WIFI router config as connected, yet the pro sends NO DATA to ie or opera, (cant locate any webpages) or any app that uses internet/data.Unless there is something I need to do with PRO that I never had to do with the 6800 (mogul) that I just flashed back to stock shipped rom, ready to sell on ebay...
what I dont know is, well, most of the people wifi to tether a laptop or something, I dont! Sure that will be neat in the future, but RIGHT NOW, Just I use WIFI when I am at home and dont even have signal or evdo near me... (remote locations that I live, the tower coverage sucks out here in ks...) Got to fix this soon, or this Beyotch is going back to alltel.
Another thing, this bad boy pulled this crap, as soon as alltel activated the device (so I could use it as my phone!) when it was NOT activated, the wifi worked (proven at the motel next door to the Alltel store I exchanged this phone). BTW, I was able to test it on the 1st phone shipped to me, while it was activated, it pulled the same thing, when he unactivated the phone, we could almost pickup the wifi from the motel next door (distance was the only issue I think now looking back) but seemed like a chip problem.
Where I got screwed was we believed the wifi to be bad on the 1st phone. So he got out a new phone, and before we activated it, I went and tested the wifi, it worked on the 2nd phone. I thought wall was fine, it worked. then I had him activate it, assuming that proved I will be able to use the wifi. So I leave the store thinking OK wifi works. I get home, and again unable to use my home networking wifi to open web or apps. unacceptable. Yet the 6800 does and still works flawlessly (as long as you slide the wifi sider on side to on {inside joke}).
follw me better now?
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Sweeny Russ said:
What brand router do you have? How many devices are wireless? And it connects to other locations but are you sending and recieving data? Try this link http://www.wmwifirouter.com/trial/ and install on 6800 if you are not normally around hotspots. This will test the t-pro's ability to send and recieve information via wifi. Now it is sounding like an IP address conflict.
Click to expand...
Click to collapse
Sweeny, Im in the houshold router (made by 2wire) I can see it (the Pro as well as the 6800) each get an ip. (I work In IT, so I know what you are talking about in ip conflicts, all that.) I have even set the router to manually setup IPs now, then set the ip inside the Pro, as well as the default gateway, dns all that.) I'm telling ya, it is more like it doesnt know the DNS or the gateway (just like I disable internet surfing on the computers at work that I still must use networking)
I copied the DNS and everything from a working laptop (ipconfig -all) on a wireless laptop today, and still as if it was disabled.
This weekend i will test the dang thing tethering with my notebook i'll bring home from work (use the pro as the internet access). if it wont tether either, then I think allHell is doing something. Again if the device is DE-Activated I will wifi... {I'll bet you $$}. I might call alltel, tomarrow night, and try that. I'll have them inactivate it and if it suddenly works, then the question is, what do I do with alltel? they dont have the right to disable hotspot usage do they?
I feel I feel the presence of VERIZON already in Alltel, Luke is turning to the dark side. NOOOOOOOOOOOOOOOOOOOOOOOOO!
You all thought I was off my crock...
http://www.htcwiki.com/thread/2073117/Touch+Pro+WiFi?t=anon lots of folks posting same problems it looks like.
Need that group of people who can create a kitchen, and hcak tomtoms, to help us with this PLEASE!
No I don't, think you're off your crock I just know how frustrating problems like this can be. Here is what I suggest you do. And if this doesn't work exchange the phone or try a different router. I know what you're thinking....not the router. Truth is might be. Its just like wireless adapters in wii's and ps3's they simply will not work with a handfull of routers even though not clearly documented.
Anyway, change router to static Ip's, safer anyway.
Specifiy gateway, primary and secondary dns, and limit your ip's within 100 available obtainables. Use a 64 bit wep encryption. Change the channel of your router's broadcast to 1 or 11. Use only simple gateway ip range, not pure server. If you need me to provide you with example settings then pm me because I do not want to broadcast them via forum
Good luck.
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
I have had the alltel touch pro since the second they hit the store. I have used 3 of them since and they all work perfectly on wifi. I primarily use wifi and use diamond tweak to activate the wifi standby so wifi stays connected in standby like data does by default and use modaco nodata to disable data as I live in a house that gets a very lowsignal from the tower and eats my battery superfast if I use data. I have a router in the house and one in my office detached from my home and when I had my mogul it often would not switch between routers successfully requiring me to manually connect more often than not. All the Touch Pros connect superfast and switch automatically. I am running mightyrom 4.12 and telus radio which is light years better than stock with signal, speed and batterylife, but even when I was on stock for about 3 months there were absolutely no wifi issues.
ACoolGuy said:
Dont take this the wrong way....but are you positive that you are disabling the DATA Connection in Comm Manager?
Click to expand...
Click to collapse
Not sure which of us you are asking this queston of...
Thanks, for the help so far...
I was having the same issue (Alltel and all).
I found this post in the MS forums:
http://social.microsoft.com/Forums/en-US/windowsmobile/thread/561f18a8-5f64-4359-957e-adb003229f1d
Essentially, it says to "Navigate to START/SETTINGS/Connections Tab/Connections icon/Advanced Tab
Press Select Networks Button
At the top it says "Programs that automatically connect to the Internet should connect using:"
You want to press on the drop down and choose My Work Network"
You need to tell the system that the Work Network connects to the internet as well. While this doesn't seem like the ideal solution (there should be a faster way to switch it, or it should do it automatically depending on location), it did work for me. I'm sure there's a much more sleek solution out there, though.
Btw... I hope I'm posting this correctly. I'm more a reader than a poster.
Ooop... one more thing. Its non-sleekatude rests with the fact that when you want to switch between wifi and your data plan, you have to go through the whole process, and switch the active network from My Work Network to Alltell Wireless. This is where I was hoping for a better solution. As I say, it does work, but it seems like it should involve less hassle.
Might add this to the WIKI, I dunno but there could be a few more thousand users out there on ATT or SWB using the modem/routers that they shipped when you got DSL more than a year ago...
Everyone that has the older 2 wire brand, wifi modem/router that came with SBC (now ATT). Wierd I know. But Mine has just been replaced by the newer version of that modem/router. and I will be dammed, it works. but the phone wont work with the older ones. Mine was the 2WIRE 1000hw model. they are shipping new models, and finally the phone will work with the wifi on that new router.
Thought it might be nice to know...
alltel model uses wifi just fine
My TP from alltel works just fine with wi-fi all i ever do is turn it on and then select which connection i want to make ...really quite nice...maybe you need to exchange yours...
On further testing of my own setup, I'm thinking my issue was the router. I had done several fixes all at once, and cited the wrong fix as the working one. I happened to reset my router at the same time I did the above suggested fix.
I thought it had to be the device, as my HTC Apache never had an issue with the router, but after resetting the router, and going back to the original settings on the TP, I'm having no problems connecting to the network. I wish I could pinpoint the exact conflict between the two, but now that I have it working, I'm not messing with it.
My suggestion is to back up your router settings, reset the router, and see what happens. Or test your wifi on someone else's network.
Isolating a network conflict can be one of the least fun things to do, but from everything I've seen here and in other forums (and my experience with it) I'm going to say that's the issue, and not the TP alone.
I don't think it likes your router being wireless B, you should try it on a wireless G router before Ebaying it.

[Q] HD2 WiFi Router doesn't work anymore

Hello xda ppl,
I'm going crazy with an issue on my HTC HD2. The WiFi Router doesn't work anymore.
Ok, first of all, if I hard reset the phone, the WiFi Router works again, so the problem is on actual settings. I don't use this features very often, so, really, I don't know which is the issue root cause. Probably some applications installed in the last months... However uninstall all applications doesn't help me...
I perform some test hard resetting and then restore only some sections (using SPB Backup). If I restore Windows Directory OR the Windows Registry WiFi Router doesn't work!
Since I don't wanna reset my device since I have to install a lot of applications, configure it, configure the device.... Very long time to do that....
Does someone advise me if there's a way to restore the original HTC WiFi router functionality without reset my device?
Or, maybe how can I reset the actual configuration modifying something on the registry/Windows directory?
Thanks!
In case You have programmed SPB backup for automatic backup try to restore the oldest backup You have and start from there.
Whenever I install a new app I do a backup and then check all essential functions including WiFi-router, if probs occur I do an immediate restore
Happened last week when I installed the 3G-enabler/disabler from XDA: BT and WiFi router didin´t work any more, so I did just a restore and everything was fine again
Thanks for reply troed, backup the device first to try a new application is also my goal...
Btw, my oldest backup is from 10 May 2010 and the WiFi router issue is still there... As already said I use the Router functionality only during Holidays (like now ) or just in rare cases. So the problem is very old... But I cannot figure which is the application that cause the issue!!!!
Now I'm surfng the internet using USB sharing features, but is very slow compared to WiFi connection!!!
So, I'm scratching my head to restore the router functionality.... Maybe there's a way to delete all the file/registry entries and then let the device restore it like during the first initialization...
However, just now I tried the Tom Condon Wifi Internet Sharing package... No way!
Hey, I had this problem with the wireless router a few days ago too... You might want to take a look here http://forum.xda-developers.com/showthread.php?t=756830&highlight=wireless+router+problem
Regards
BTW: I remember now I had a prob with WiFi-router once I updated Intel-radio-drivers on my VAIO - notenbook, Router didn´t work at once. I took the old drivers and suddenly it was oaky again, but it was on the side of the NOTEBOOK ! (has sumthin to do with the protocols TCP/IP etc.)
Did You check this also`?
ahgao said:
Hey, I had this problem with the wireless router a few days ago too... You might want to take a look
Click to expand...
Click to collapse
No way, this is not my problem and your solution it doesn't work for me! However, thanks for your feedback!
troed said:
I updated Intel-radio-drivers on my VAIO - notenbook, Router didn´t work at once. I took the old drivers and suddenly it was oaky again, but it was on the side of the NOTEBOOK ! ..... Did You check this also`?
Click to expand...
Click to collapse
As already told, if I hard reset the device I can use the WiFi router without problem on the same notebook. So, I believe the problem is on HD2...
BTW. I tried WM WiFi Router application. I remember now I had an old license working fine also with ver 2.0.
Now the WiFi router works again. For sure, not the original one, but this is much better. I'll only take care about battery drain. In the previous version the application drained the battery in a while.
I would like to know WHY the original router doesn't work, but since I have "limited" access to the network, for now I'll use the "WM WiFi Router" temporary solution.
Any other feedback are welcome!
Hmmm... I think there are a few settings to adjust for the router to work...
If the post I posted doesn't work, then you might have to check if your settings under
Settings ---> All Settings ---> Connections ---> Connections ---> Advanced ---> Select Networks
For me, both are under the Internet settings... Example "Vodafone Internet"...
Even for "Programs that automatically connect to a private network should connect using:" I have set under the internet settings instead of My work network...
When you turn on the wireless router, you are also given an option to choose which kind of network/connection you would like to use... Choose that one that gives you your internet connection... Example "Vodafone Internet"...
And if all else fails, you may try my method posted in the past few posts... If that STILL can't help you, I'm sorry but I've tried my best! =) Hope you can settle it soon!
Also, make sure that your Broadcom Network adapters connect to "The Internet" and not work
No way also playing with Network Settings. I had tried a lot of combination without success... Seems an "unknown" application/s have change something on Windows directory AND on Windows Registry that prevent WiFi Router to work. I have so many custom settings, with application like Co0kie's Home Tab, CSMI, BsB Tweaks, Pocket Informant, Klaxon, Chainfire-HD2-3D-Driver, incall lock, NET CF 3.7.... and so on... So, probably one of these apps have changed something in a wrong way.
And again, since hard resetting the device solve the issue, with very big patience, after a reset, I'll start again to customize my device trying the router each time I install a new application or apply a new settings!
Just last question: Does someone know which is the registry settings for so called "Fast Call" (the second standard tab) where I put the contact photos?? Or in general does someone know which is the registry settings for manila settings (like the tabs settings)?
Regarding WMWiFiRouter mentioned in my previous post is a good application, but I can confirm it will drain the battery and probably also burn it, since its temperature has reach an high value. I can hardly hold the phone in my hand!
OH MY GOD!
After 3 days of resetting, restoring, change Windows Registry, remove some files from Windows directory and in general going crazy to find the issue route cause.... It's incredible, but I finally hit the target!
I changed some settings using "BsB Tweaks" (great app moreover)... I'm pretty sure I changed the settings related to WiFi, plus some others! I reset again the device and try again to be sure!!!!!!
I'll post the result asap if you're interested!
One of the problems with wifi-router is that it always uses channel 1. If any other router nearby uses channel one, you have no chance to connect to it, as it is very very low power. Check networks in your neighborhood if any of them uses channel 1, or go somewhere where there is no wifi (like park) and try it there.
Well, I'm not really sure, but disabling TCP Cache (on BsB Tweaks) solve the problem. I cannot be sure because now the "original" WiFi router works so I don't want touch anything else!
Maybe re-writing the BsB configuration help to solve the issue....
I'll investigate better when I come back from holidays!
do you have activated the wlan-n modus? if this registryhack is activ, wlan router dont work anymore.
i think this tweak can also edited in bsb-tweak tool or manual in windows registry. so deactivate the 802.11 n modus and your problem is solved.
Yes, I can confirm, this is one of the modification I applied on BsB, togheter with:
- TCP/IP High Cache = Off
- WiFi N = Off
- WiFi StandBy = Off
After that, WiFi router works again!
Damn! That's because I need to extremely tune everything!!!
troed said:
BTW: I remember now I had a prob with WiFi-router once I updated Intel-radio-drivers on my VAIO - notenbook, Router didn´t work at once. I took the old drivers and suddenly it was oaky again, but it was on the side of the NOTEBOOK ! (has sumthin to do with the protocols TCP/IP etc.)
Did You check this also`?
Click to expand...
Click to collapse
You're right troed, with the latest drivers of Vaio wifi router doesn't work. Now it's ok with the old ones.

Categories

Resources