I upgraded my himalaya to WM5 using llbasha's rom. Everything was ok, all functions of my device was working. But one day i saw my devices screen was shaking like a old tv near a ringining cell phone. When i reset my device i see screen become white and device dont turn on. I charge battery on cradle and try about 4-5 times to turn it on i turns on but turn it on is really hard. I tried to downgrade it to WM2003 or some other roms but himaupgradeut doesnt recognise my devices rom and extrom or ce version. I tried to go on to flash the rom. Flashing finished but it was still WM05 but with WM2003se splash screen. And still screen was shaking ang still i was living white screen problem. I checked sccren connector and it was ok. Whenever i look bootloader it shakes too. I think problem is about device, not about display because when i live white screen problem any of lights turn on or any buttons work. If anyone can help me or give any advice i thank a lot.
Best regards
Azkuhraad
Solved
I solved problem by changing mainboard of device.
my USB cord disconnected during a rom upgrade, and I can't get back to the recovery screen on the computer. My phone is currently in the 4 color mode (red, green, blue, white), how can I get it out of that to continue my rom upgrade or start over?
att 8525
Mine did that a couple times, I just started the process over again and my phone is working great
but doesn't the ruuupdater.exe have to verify that activesync is running so it can connect to the phone? the phone won't even load now, just goes to the multi colored screen.
I've also tried restarting the update program for both the 1.50 rom and the wm6 and both cannot connect to the device, because it is stuck at the multi-colored screen (which currently says "usb" since I have it connected to the usb)
Have you try a soft reset? That usually works for me.
how do i do a soft reset if I can't perform any functionality on the phone? not a smart remark, I just can't perform any actions on the phone, doesn't even boot up, like i said, only the red, green, blue and white screen appears when i turn the phone on.
thanks for your help guys.
itsbrianwithay said:
how do i do a soft reset if I can't perform any functionality on the phone? not a smart remark, I just can't perform any actions on the phone, doesn't even boot up, like i said, only the red, green, blue and white screen appears when i turn the phone on.
thanks for your help guys.
Click to expand...
Click to collapse
Get your stylus and poke the little hole next to the IR near the usb port. Check your manual if you can't locate it.
I understand where that is located though, when I click it, it brings me back to the multi-colored screen.
First of all do you have HardSPL installed? If yes there are no problems...just run the upgrade again and choose the SPL version you have (and not the SSPL, cause it hasnt`t worked for me!) and go ahead...it will work!...at work I have a bad USB cable and in last week have failed to upgrade about 3 times...every time can resume from the begining withouth problems...
Regards,
Primoz
Primoz, that was the info I was looking for, thank you so much. I received an error saying the image file was corrupt but I will continue working on it.
Now I'm having an issue when wm6 loads (still have not repaired the ROM update yet), it hangs at the Windows Mobile 6 screen and does not go to the today screen, any ideas?
Hi guys
Hoping someone here can help me
I have a Qtek 9100 G4 that currently has IPL 2.21.0001 and SPL 2.21.0lip with Slim Diamond WM6.1 Rom
This was running beautifully until i left the phone for a weekend plugged into the wall charger.
When i came back now whenever i switch on the phone it shows the Diamond splash screen, doesnt show the ipl or spl and just stays there indefinately.
I allowed the phone battery to drain for a week and when i turned it on it booted normally again, got to the main wm 6.1 screen, it automatically customised the rom and then rebooted. Then im back at stage one again! I can repeat this by leaving the phone with no battery to drain the internal one. Hard reset works so say but doesnt have any effect.
I have tried different techniques to reflash the phone but no matter which guide i follow the usb is never ever recognised as connected. All RUU say is error 260. Even Wizard Love is no go. I have tried the disabling usb connections and disabling the correct services, can happily get into bootloader mode but can do no more - says usb in corner but computer never registers anything attached
My only idea is that somehow leaving it plugged in has fried the usb - its weird tho as it still charges fine with computer or wall charger.
Im getting near to giving up with this phone now as no matter how many guides i follow none ever get anywhere with this phone
Has anyone had anything similar happen?
I have an old 8525 that I want to bring back to life... tired of the iPhone. It has Mobile 5 on it. Haven't used it in... oh, close to 2 years. Still powers up fine and all so I decided to try upgrading. I used Hard-SPL first and it errored out after the tricolor screen came up, saying it couldn't find the phone. So I popped the battery and went back in, and tried Auto Unlock v3a. Script failed, as did the manual method of copying up. Every time I get to the tricolor screen and it displayes HERM100 IPL-SSPL by Des and HERM100 SPL-1.09.ds. If I leave USB plugged in it says USB, otherwise it says serial. I do NOT have a SIM card in it right now. Am I missing something? It seems like I should have an option on the phone to do the upgrade, but I just have the colors I'd really like to get up to 6.5!
Thanks,
MP
Hi.
I bricked my tg01 totally so I gave it to riffbox guy and he revived BL (also simlock got removed) but:
When I want to turn on - Green led blinks, phone vibrates and that's all, nothing else at all.
When I wanted to flash it, no way worked but TG Downloader detected the phone and I started flashing wwe official rom, but it hungs, twice in WMB3 flashing, and once in veryfing data. Then led goes red and after disconnection nothing works at all, even tgdownloader.
But if I connect usb cable/charger then, led goes red but after some time goes off, and again red, and again off...
I read about red led issue and charged the battery via usb cable directly, it helped me with flashing again, but after any flashing, green led blinks, vibrate and die...
Can somebody help me a bit? I've got confused really...