So i've been reading that this is a bootable screen and I can't seem to get out of it. Nothing is working, soft reset or anything. I tried to upload a rom on it but it worked for 1% then went back to that screen, any ideas?
Did you already do the hard spl on your phone? If you did then try flashing from a storage card a different rom. Check this out http://forum.xda-developers.com/showthread.php?t=508084
Related
This is what happened:
I received a used Alltel PPC6800. It had WM5 installed. I called Alltel to activate the phone. It activated and reset itself... to the bootloader. I couldn't get it out of the bootloader, so I thought what the hell, I'll upgrade to the latest ROM that HTC put out for the Alltel PPC 6800.
The ROM loaded fine, and upgraded to bootloader to SPL-2.07.. However, it was stuck in the bootloader. So, I did a soft reset. Windows 6 started up. Then it went to auto-install the Alltel custom software. Then it reset, and has been stuck in the bootloader screen ever since. It can't be hard reset, it can't be soft reset... reloading the ROM doesn't work. I can't try changing bootloader versions because I need to be in the OS to do that. I can't load an older ROM, because it won't let me do so... it fails at 1% and says something about an Invalid ROM.
Oh, and that titan_exitbl.exe program doesn't work. It just resets the phone back to the bootloader.
I will be mailing it out for an exchange in the morning unless someone here may know of a way to get it working again.
Thanks!
NO its not bricked, it wouldnt power on. Sounds like its messed up good though, good luck
Well, I found that I *could* get it to load the OS if I used MTTY and the 'set 0 16', 'boot' trick.
I then upgraded the bootloader to above 2.4. However... it still hangs at the bootloader screen if I reset the device.
So... It seems something else is going on, that is preventing the device from loading the OS on it's own. I can't really be plugging it into a computer and running MTTY every time I need to reset the damn thing.
Any ideas?
mantispid said:
Well, I found that I *could* get it to load the OS if I used MTTY and the 'set 0 16', 'boot' trick.
I then upgraded the bootloader to above 2.4. However... it still hangs at the bootloader screen if I reset the device.
So... It seems something else is going on, that is preventing the device from loading the OS on it's own. I can't really be plugging it into a computer and running MTTY every time I need to reset the damn thing.
Any ideas?
Click to expand...
Click to collapse
Have you tried to flash since you upgraded the BL....if not give it a shot and see what happens....use the SD method to flash....put NBH file on card and rename it to TITAIMG.nbh
Yup, just tried flashing from microSD, and it flashed just fine, but has the same problem.
It won't exit the bootloader. I wish I had a USB headset adapter to see if that would make it boot. I've heard that works for some of these that have this problem.
the weirdest thing started happening today. i was using my phone as normal this morning (i had soft reset 1 or 2 times earlier) and all of the sudden when i soft reset on psShutXP, it took me into bootloader. odd, but nothing an old exit_BL couldnt fix. well it wouldnt send the commands, but i found out later that once i connect the USB to my computer and it beeps, i can soft reset out of BL. but now its happening EVERY time i soft reset, even running Sprite Backup, when it soft resets, it puts itself into BL. i was running DCD 3.2.2 and i reflashed a clean ROM (and also 3.2.3) and the problem is still arising. im thinking its hardware, but i havent dropped it or got it wet. any ideas?
alright so now im completely stuck in bootloader, it wont even do anything. i left the battery out last night and it booted fine this morning. however as soon as it reset after UC (it hard reset itself) it went back into bootloader. i was trying to load the stock radio/rom so i can just take it in but it wont connect to activesync at the tap to begin. i need some serious help.
have you tried a hard reset from bootloader? you were a little confusing in your posts. what exactly are you doing from boot time to ending in BL? are you able to reflash, then after UC you get stuck in bootloader? are you doing a full restore with Sprite Backup? can you clarify exactly what is going on, step by step?
it wont hard reset in bootloader. it just refreshs the screen. well since i am in bootloader, yes, i can flash. i flashed and after it boots and runs UC and loads the programs, it soft resets and goes into bootloader. the only way i can get out of bootloader is to plug in the USB, wait a minute, then soft reset. if i soft reset (either manually, Sprite, or psShutXP) it goes into bootloader. im not 'stuck' in bootloader because i can get out, and exitBL still does nothing. ive been trying to brick it but nothing is working.
have you tried flashing and booting with your SD card removed so UC doesnt run?
kflipproductions said:
have you tried flashing and booting with your SD card removed so UC doesnt run?
Click to expand...
Click to collapse
yep, and cooked a clean ROM with UC unchecked. ive never seen anything like this, its bizarre.
so even with UC off, no SD card, after reflashing if you soft reset it loads BL?
kflipproductions said:
so even with UC off, no SD card, after reflashing if you soft reset it loads BL?
Click to expand...
Click to collapse
yes. im pretty much at a dead end for ideas.
have you tried reflashing bootloader itself? or a different version?
nope, trying it now.
let me know..
nope still doesnt do anything. still soft resets into bootloader.
damn. thats weird. have you tried relocking it?
kflipproductions said:
damn. thats weird. have you tried relocking it?
Click to expand...
Click to collapse
i cant; it wont connect to activesync even on the today screen or anywhere. but the computer does beep so i know its connected.
get back to the point where you can boot to the today screen and turn 'advanced network functionality' off before you connect to activesync.
edit: nevermind, its not doing anything. im at the today screen. it started connecting but nothing happened.
alright thank you i got it back to stock but im going on a surfing trip til sunday so ill see what i cant do when i get back. thanks a ton
-Nick
what did you end up doing?
i took out the battery for 10 minutes and it booted up, and after being USB connected to the computer for another 10 minutes, activesync started. i flashed the stock radio/ROM and relocked to the 1.06 bootloader because i cant find the stock 1.04. anyone know if its possible to flash the 1.04 bootloader?
im thinking i could just play dumb when they ask about it. Something along the lines of, "Ohh, thats just how it came. Flash? Whats a ROM? Bootloader? HUH?"
There is no 1.04 bootloader. It comes stock with the phone. Having 1.06 on there will be fine trust me.
I appologize in advance if there is a lot of information about this but I have searched and searched and haven't found anything as of yet. I have the Verizon Touch Pro with the newest V2 stock ROM from several months back. Now I am interested and going back to a custom ROM. I have tried the latest HardSPL (I think it was 0.35) and when I run it I get "Loading..." on the TP and eventually "ERROR [260] : CONNECTION". If I pull the battery and put it back in it boots up to the way it was so clearly nothing is getting programmed. I have tried it on 3 computers and get the same thing. I had programmed it many times in the past successfully but that was before I upgraded to the V2 stock ROM. I'm wondering, is it that upgrade that is causing the problem? I have not tried via SD card yet but I plan to at some point today.
Thanks,
Tbone
Ok, I put the Verion HardSPL on my SDCard root and renamed it RAPHIMG.nbh. I forced the phone to the tri-color screen by holding power and volume down and then pressing soft reset. It flashed the tri-color and then went immediately to "Loading..." and has been there for 10 minutes. I do remember that when I did this previously it would ask if I wanted it to load the ROM and that is not happening. Any ideas?
Thanks,
Tbone
Ha, I got it. I put the ROM on the SDCard and then copied over VZW_TP_SSPL-Manual.exe and ran that on the TP. It initially showed "Loading..." and then quickly changed to "Checking..." followed by the option to load the rom on the SD card. Not sure if this is the only way to do it once you have installed the V2 ROM but it seemed to work at least with HardSPL. Interestingly, I then put the custom ROM on the SDCard and re-ran the SSPL and this time it went to "Loading..." and stayed there. So I reset and forced the boot in to the Tri-Color screen and this time it got past the "Loading..." screen without a problem. I'm definitely a bit puzzled over this but I'm now up and running with a custom ROM again.
Hopefully this might be helpful to others.
Tbone
ive been running the energy rom for like two months now everything has been fine. today my phone hangs a little bit so i restart it and it wont boot all they way up!!! what do i do to fix this please help!!!its stuck at the screen right after the screen of the color sparklers.
[email protected] said:
ive been running the energy rom for like two months now everything has been fine. today my phone hangs a little bit so i restart it and it wont boot all they way up!!! what do i do to fix this please help!!!its stuck at the screen right after the screen of the color sparklers.
Click to expand...
Click to collapse
use the proven process of elimination, have you installed something recently?
a Manila Mod, or tweak? I hope you have a backup of everything essential
on your device, as it may that you need to HR
maybe its only a dead sd card..
take out sdcard, sim card and battery for a few minutes and reinsert only the battery and try to boot up...
if this doesnt work, you'll need an hard reset..
so i kept resttiing until it booted up. then i saw these posts and decided to restart the phone and it doesnt work again. so i reset again an pressed the talk button then it went to the launching sense screen. me being a gambler i reset it again and it stalled again until i hit the talk button. now i reset it a couple of more times and its back to loading normal on its own. im only stating everything i did just in case someone else might come across this problem at some time. thanks for you guys quick response and help
Try a full reinstall using the flashaholic app that does a full OS ROM format, also backup any files on the SD card and reformat that too and see what happens.
I should add that the full "task 29" format thing probably wont work well unless you have HSPL installed (otherwise you have to first install a stock ROM, then SSPL install your custom ROM; kind of defeats the point of the full format!)
my TMOUS htc hd2 screen is no longer responsive to any sort of finger movement so i want to return it because my warranty still covers it, but in order to do that i need to put it back to stock ROM, and thats not happening because i cant get bootloader to start, i get the tricolor screen and it flashes gray then it stays on the tricolor screen, even though i copied the LEOIMG.nbh into the sd card, also did a complete format for the sd card before.
i cant start bootloader.exe from the phone because the screen doesnt respond to touching, all buttons work fine but thats not enough.
any ideas on how to get around this and get bootloader to start ? im out of options here ive looked it up for hours with no solution, someone else was having a similar problem and it was fixed when he did a complete format to the sd card instead of a quick one, i did that twice already.
Is there any reason you can't connect to a computer to flash? That's the only other way I know that would let you flash another ROM.
flashing a ROM isnt the problem, because i can get the stock rom on it but i need to also take HSPL out i need the radio to be the way it was when i got it and the only way that i know of to do that is by bootloader
If you flash a stock ROM even from the computer, that will usually include a radio, so you should be ok as far as the radio. HSPL should be able to be undone from the computer as well using HSPL2/HSPL3 and choosing the normal SPL from the list.