Related
Hi everyone, well i been working on this all day and have finally gave up..
Right now, since i flashed about 2 weeks ago, i still have not had a working data connection.. always fails. GPS works great, but useless if i cant use google maps, and my main reason for purchasing the phone was for the data connection.
I would really like to talk to any fellow *Telus* members that have GPS working + data connection. I seem like i have done everything i can.
Also, if i cant get the data connection working, I was wondering if anyone knows where i can get the OEM Telus rom. I would like to revert back to a stock phone, radio/bootloader/rom the whole kit--incase i want to send it back to telus
Thanks
[edit]
Im currently running dcd 2.2.3 rom
radio 3.27.00
[UPDATE]
See my last post for info on how I fixed my problem!
I am having similar problems on my XV6800. I first went from stock to 1.6.10 with no problems, then up to the 2.1 to 2.3.1, no problems. I then downgrade to try out 1.7 and now I cannot get data to connect. Everything else works fine, but no data. Any ideas would be greatly appreciated.
gario1 said:
I first went from stock to 1.6.10 with no problems, then up to the 2.1 to 2.3.1, no problems. I then downgrade to try out 1.7 and now I cannot get data to connect. Everything else works fine, but no data.
Click to expand...
Click to collapse
I've followed the same "upgrade path" as you and now have the identical problem with my vzw xv6800 and dcd's 1.7.0. I posted in dcd's 1.7.0 kitchen thread since this one's title didn't really match.
So i guess the real question is how do we revert and go back to a stock device so we can try again from the start?
Its weird, so many people have their gps & data connection working fine. I know for me, all i have found is sprint information which is useless for me as a telus client again, any of you telus users out there id like to know your secret
I was having data problems when I first upgraded. If you can try going to settings, personal, phone, services, internet, initiate IOTA, see if that works. If not you may need some programming on the end of your carrier. After calling Sprint it got sorted out and my internet works just fine now.
jemmrich said:
So i guess the real question is how do we revert and go back to a stock device so we can try again from the start?
Its weird, so many people have their gps & data connection working fine. I know for me, all i have found is sprint information which is useless for me as a telus client again, any of you telus users out there id like to know your secret
Click to expand...
Click to collapse
I tried reverting back to a stock rom and that wasn't the case. I'd recommend calling your carrier, but don't mention in the process that you are using a custom rom.
FZ1 said:
After flashing this rom I can't establish a data connection.
Here's the "upgrade" path I've taken on my vzw xv6800.
Stock -> Olipro 1.20 -> 1.40.00 radio -> various dcd 1.6.x roms and others -> Olipro 2.40 -> 3.27.00 radio -> various dcd 2.x.x roms and others -> Olipro 1.20 -> 1.40.00 radio -> dcd 1.7.0 rom.
I've never needed an A-Key or had a problem with voice or data after a flash.
The data connection seems to reject any username/password I enter. I've tried using u:<number>@vzw3g.com p:vzw, and leaving both blank and checking "save password", neither work.
I can make/receive calls fine, IOTA seems to work fine.
I've tried flashing a rom with dcd's BuildOS defaults, and one with only a carrier change to vzw, same behavior with both.
I've found one other person that followed the same upgrade path, and has the same problem, in this post.
Any ideas?
Click to expand...
Click to collapse
illuminarok said:
You have previous data session active from other ROM build. So your account is still logged in on verizon server.
It's like IRC when you get disconnected from internet, then reconnect and login to IRC and see your previous name is still in the channels. You need to wait a bit for it to "timeout".
Have to either call verizon and have them kick off the ghost, or turn off your phone, take the battery out, and wait about 20 minute.
Goodluck!
Hiromitsu
Click to expand...
Click to collapse
This is from the other thread, hope it help.
Hiromitsu
silentbenton said:
I was having data problems when I first upgraded. If you can try going to settings, personal, phone, services, internet, initiate IOTA, see if that works. If not you may need some programming on the end of your carrier. After calling Sprint it got sorted out and my internet works just fine now.
Click to expand...
Click to collapse
My phone doesnt have the Internet option there. I also installed iota.cab but something tells me its sprint specific, it failed aways.
I called *22803 and did the over the air programming that way. It fixed a roaming issue i originally had... somehow after the flash i had ended up with a wrong PRL.
One thing that i have noticed that is very odd. When i enter ##778 and click edit and enter my unlock code and click the View Info and M. IP Default Profile. The NAI value is my hex esn and sprint in the form of an email address!
When i was writing down my provision data (before my first flash) i did a quick look thru of all the options and that value was [email protected] -- not sprint.
Its weird that im a telus user, yet have spring information in my phone.
Further down the list is HA Shared Secret and AAA Shared Secret. These have strange data that i think are probably wrong if the NAI is wrong as well.
Any ideas?
When I first called Sprint they had me replace the HA and AAA secret stuff, but it didn't help me. Somewhere along the lines some of my data was lost and needed to be reconfigured on their end. That may be what has happened to you. You might try downgrading , but in my experience it did nothing, I was still unable to use data when I downgraded.
silentbenton said:
When I first called Sprint they had me replace the HA and AAA secret stuff, but it didn't help me. Somewhere along the lines some of my data was lost and needed to be reconfigured on their end. That may be what has happened to you. You might try downgrading , but in my experience it did nothing, I was still unable to use data when I downgraded.
Click to expand...
Click to collapse
did they have you clear the fields? or enter some info? im afraid to clear it just incase and it would be *super* hard typing it back in lol
They had me retype the HA and AAA, but that wasn't the problem. I think it is best to call them up and see what they have to say. Just tell them you've done a hard reset and then your data connection quit working. Don't let them know you flashed a custom rom and tell them you think you need to reprovision your data connection. That should get it sorted out.
silentbenton said:
Just tell them you've done a hard reset and then your data connection quit working. Don't let them know you flashed a custom rom and tell them you think you need to reprovision your data connection.
Click to expand...
Click to collapse
Calling vzw and playing dumb fixed this for me! They "reprovisioned" my data.
And just so we know what might have caused this,
dcd1182 said:
I have had to reprogram my device every time I go from radio 3.27.00->1.xx.xx
Click to expand...
Click to collapse
I managed to answer my question about stock telus rom.. and managed to get back to factory defaults... everything worked--even data!
So now i need to find a rom made for us telus folk that that i can try out. Can anyone upload the one that works for them to a fileshare site? I am specifically looking for a rom that works on the p4000.
Also, I have tried cooking a couple roms using dcds 2.3.2 kitchen but not luck -- still no data connection. So fustrating being the only one without a data connection lol
FZ1 said:
Calling vzw and playing dumb fixed this for me! They "reprovisioned" my data.
And just so we know what might have caused this,
Click to expand...
Click to collapse
I called telus and played dumb aswell. I asked them if its possible that things got screwed up on their end such as having a phantom me still logged into the data service but the lady said that it was impossible. I also asked if there was anything reprovision yadda yadda..
All she suggested was check my MDN and MSID and if that was ok (which is was) then take it in for warranty.
With all that said and done though, flashing to the stock rom worked. so some how the roms i have been trying just arent allowing me to use the data connection
I don't use Telus so I'm just guessing, but when you "played dumb" did you simply say that you can't establish a data connection after doing a hard reset?
FZ1 said:
I don't use Telus so I'm just guessing, but when you "played dumb" did you simply say that you can't establish a data connection after doing a hard reset?
Click to expand...
Click to collapse
yeah i told the i did a hard reset because my today screen messed up
I am with telus, mine is working perfectly.
Been using different version of DCD roms. I was having lots of problems. like the phone freezing not connecting to active sync after installing programs. I have since cooked 2.3.2 rom and been using it for a few days. Everything seems to be working perfectly.
maybe try flashing your radio again? I was gonna suggest your MSID..etc. But it seems you have checked it with Telus already.
Have you looked in modem and make sure you have #777 in there? (I am sure telus prolly would have had you check that...but just incase)
jemmrich said:
One thing that i have noticed that is very odd. When i enter ##778 and click edit and enter my unlock code and click the View Info and M. IP Default Profile. The NAI value is my hex esn and sprint in the form of an email address!
When i was writing down my provision data (before my first flash) i did a quick look thru of all the options and that value was [email protected] -- not sprint.
Click to expand...
Click to collapse
Also have you tried changing your NAI Value?
my is [email protected]
and DUN NAI: [email protected]
AAA Shared Secret: Should I be sharing this?
Perhaps try doing and RTN reset then reprovisioning your phone? RTN reset is a hard reset that also wipes all provisioning data to defaults. Then you will need to reprogram your phone with MDN and MSID. Only proceed if you know your MSL, MSID, and MDN. Or after doing the reset have Telus walk you through reprogramming your phone.
##786#
menu->reset
Heres what i did on my latest flash using a rom someone else has no trouble running:
flashed from the bootloader screen after the device makes a beep on the computer
first boot, set up screen by tapping points
rom makes customizations and does a reboot
i check my MND and MSID via ##390215 - everything checks out (its my number with area code)
next i head to phone settings and check the number is good there. yep
now i attempt to call my voicemail - works
i call someone - works
next i wanna test data so i first have to set up modem...
Settings > connections > connections
Advanced > select networks - I choose a name "my isp name"
under modem tab i add new and select a name for it "my connection"
next, enter #777 for dialup
fill out user/pass (user being my phone + @1x.telusmobility.com and pass being esn decimal form)
i click finish and open up pie
enter a website - www.google.com
pie tells me its invalid and does not try to even start a data connection
I try installing google maps, so i copy cab to sd card, in file manager copy, nav to My Documents folder and paste
I get access denied. be certain there is enough memory yada yada and same thing happens when i try to copy a file to the sd card -- weird
so i try use camera take some pictures, they save to the sd card and not the internal space - and manually copying doesnt work either
so i check how much space i have free... Storage total: 167.40mb inuse 3mb free 164.35mb, program: total 46mb in use: 23.77mb free 22.23mb
storage card tab says i have 1857.91 mb free
Activesync will not let me connect to the device so i cant try installing software like that.even though i have uninstalled it and reinstalled it, seems to be device issue due to rom
so i double check my device settings: ROM version DCD 2.3.2, Radio 3.27.00, browser msie 6.0, ESN is correct in hex form
at this point i dont know what to do
tried to make this as detailed as i can so someone can possibly tell if i missed a step along the lines somewhere
I think you problem is here:
# next, enter #777 for dialup
# fill out user/pass (user being my phone + @1x.telusmobility.com and pass being esn decimal form)
Click to expand...
Click to collapse
There should not be any username/pass there...at least I don't and it is working for me. I think it is more to do with your ##778 under you NAI...change it there...
I'm sure the answer to my question is somewhere in this forum...but no matter how I search...it does not reveal anything I can use.
I recently upgraded to DCD 3.2.6 with the .50 radio and SPL 2.47 and used the Verizon carrier cab
My data connection fails every time I try to connect. I get the message PPP Connection Error.
After reading a few post within the forum...it was sometimes suggested to re-run the carrier cab which I did about four times...it tell me that it successful but still fails to connect.
I then called Verizon and they where unable to resolve my connection issue...so they are sending me out a new phone...oh I'm using the XV6800 Verizon.
So...what should I do now?
See if somebody can help me to get my data connection working and tell Verizon not to send out a new phone...or reset my XV6800 back to stock ROM and go for the new one...which of course will probably have the new stock ROM on it...which will not allow me to install a custom ROM.
Any suggestions?
dlitz said:
I'm sure the answer to my question is somewhere in this forum...but no matter how I search...it does not reveal anything I can use.
I recently upgraded to DCD 3.2.6 with the .50 radio and SPL 2.47 and used the Verizon carrier cab
My data connection fails every time I try to connect. I get the message PPP Connection Error.
After reading a few post within the forum...it was sometimes suggested to re-run the carrier cab which I did about four times...it tell me that it successful but still fails to connect.
I then called Verizon and they where unable to resolve my connection issue...so they are sending me out a new phone...oh I'm using the XV6800 Verizon.
So...what should I do now?
See if somebody can help me to get my data connection working and tell Verizon not to send out a new phone...or reset my XV6800 back to stock ROM and go for the new one...which of course will probably have the new stock ROM on it...which will not allow me to install a custom ROM.
Any suggestions?
Click to expand...
Click to collapse
what do you have for your Data Network Connect? #777 and then you need name, password, and domain. I don't remember what those are off the top of my head but need to right or you will not connect. You do have a data package from Verizon, sorry I am in support and have to ask all the simple questions as well as the hard ones. Also have you tried to reload the radio ROM and the DCD ROM again, with the Verizon CAB of course? Most of the issues are cleaned up with reloading the ROM not the carrier cab. Also make sure that your data connection icon in the Comm Manager is lite up or on.
Verizon Data Tech Support ran me through some setting which one of them was to make sure I had my phone#@vzw3g.com and the pass of vzw set correctly...which I did
That still did not work...when that did not fix the problem...he went no further...and said we need to send you out a new phone.
I'm in the process of downloading the ROM radio again and going to try the procedure again...
dlitz said:
Verizon Data Tech Support ran me through some setting which one of them was to make sure I had my phone#@vzw3g.com and the pass of vzw set correctly...which I did
That still did not work...when that did not fix the problem...he went no further...and said we need to send you out a new phone.
I'm in the process of downloading the ROM radio again and going to try the procedure again...
Click to expand...
Click to collapse
Your probably not authenticated on the VZW network. Its miserable when that happens. DO you have a spare phone around? If so activate that phone against your phone number. Wait five minutes and activate the 6800 again. I do it all the time. It will resolve this issue. There is something called a "group password" you are missing. Only VZW can put that in by re provisioning the phone.
There tech support never catches this. IF you have to, call them and just tell them you need your AKey reset. You will get transfered to a security department. They will walk you through a bunch of crap then finally reset your AKEY. You should be able to authenticate as you as you dial the number that lets you program the phone. Cant remember what it is off the top of my head. ##xxx
dlitz said:
I'm sure the answer to my question is somewhere in this forum...but no matter how I search...it does not reveal anything I can use.
I recently upgraded to DCD 3.2.6 with the .50 radio and SPL 2.47 and used the Verizon carrier cab
My data connection fails every time I try to connect. I get the message PPP Connection Error.
After reading a few post within the forum...it was sometimes suggested to re-run the carrier cab which I did about four times...it tell me that it successful but still fails to connect.
I then called Verizon and they where unable to resolve my connection issue...so they are sending me out a new phone...oh I'm using the XV6800 Verizon.
So...what should I do now?
See if somebody can help me to get my data connection working and tell Verizon not to send out a new phone...or reset my XV6800 back to stock ROM and go for the new one...which of course will probably have the new stock ROM on it...which will not allow me to install a custom ROM.
Any suggestions?
Click to expand...
Click to collapse
You can revert to a stock pre-gps ROM. There are instructions to do it somewhere. From then you skip the VZW update and just follow the normal path. I have done it with my phone a 100 times. Thats how I know about the authentication issue you are having.
I do have another phone around here...I might try that
I have just finished re-installing the radio ROM and the 3.2.6 ROM...installed the Verizon carrier cab
ran the *228 option 1
waiting for the phone to reset.
I'm just wondering if I'm following the correct procedure upgrade the phone...
I used the Wiki...but it appears to be as organized as my home office...
so I'm not sure where the best tutorial is to follow upgrading the phone.
Edit...that's was a no go...same issue
Not sure what you mean in your last post...care to elaborate a little on that?
I also read somewhere that if I activate another phone...and then re-activate the 6800...its possible that I will loose my data plan associated with the 6800...
I guess I would have to call them or log into the account and re-add it...
Just an update...
I Spent about 45 minutes on the phone last night with Verizon Tech Support.
I called them back after ready your post above. I asked them if they would reset my Akey, but they wanted me to go thru a few other troubleshooting steps first.
finally at the end of the conversation...the girl on the phone said that the Verizon system is getting an A-Key from the phone and since its getting one...it can not be reset...
So...I'm getting a new phone anyway...
I guess its not all that bad...I have been seeing issues with it locking up on me when I was on the stock ROM...
Thanks for the suggestions...time to go find the thread that will put it back into stock status...for shipping back to Verizon.
http://forum.xda-developers.com/showthread.php?t=423597&highlight=ppp+connection+error
ibenjakinov said:
http://forum.xda-developers.com/showthread.php?t=423597&highlight=ppp+connection+error
Click to expand...
Click to collapse
Thanks
I've been through that thread already
However, I'm just going to wait until the new one arrives and try again...
make sure your settings for your data connection do NOT have anything under domain. also, under Connections --> Advanced--> Select Networks, make sure that Verizon Wireless is selected for the first option. i havent heard anything about this for a while, but if this is happening when you try to send or receive an MMS, it can't hurt to make sure your X-VzW-MDN key is set to your 10 digit phone number (HKLM\Software\Archsoft\Archsoft MMS UA\Config\mm1\wspheader)
kflipproductions said:
make sure your settings for your data connection do NOT have anything under domain. also, under Connections --> Advanced--> Select Networks, make sure that Verizon Wireless is selected for the first option. i havent heard anything about this for a while, but if this is happening when you try to send or receive an MMS, it can't hurt to make sure your X-VzW-MDN key is set to your 10 digit phone number (HKLM\Software\Archsoft\Archsoft MMS UA\Config\mm1\wspheader)
Click to expand...
Click to collapse
The first part of your message was checked by me and Verizon...just to make sure...
When I had everything installed and running after the upgrade...MMS was not even available...only thing I had was SMS and email.
I had to install that GC mms/sms cab file to get MMS back on the phone...and that did not even help.
As for the last part of your post
I know that's a registry key...but how do you get to it to check.
Also...just for sh**s and giggle knowing I'm going to be sending this phone back to VZW when the new one shows up...
After converting it back to stock radio, ROM and SPL
I used the official VZW MR1 ROM update and flashed the phone with that...same issue, unable to make data connections...
Thanks for all the support and suggestions...
dlitz said:
Thanks
I've been through that thread already
However, I'm just going to wait until the new one arrives and try again...
Click to expand...
Click to collapse
I had the same problem and when I switched to my old Razr and then back to the XV6800 then ran the carrier cab it worked. It may have took 2 tries (switching back and forth between phones). I did have to reselect a data plan when activating the 6800. I also may have run the carrier cab a few times. It took a lot of messing around but I finally got it to work. I guess if your getting a new phone none of this really matters though.
First off I am not with Sprint I am with USCC, but my TP is giving me a PCS Vision password failure screen every time I try to connect to data.
Here is what happened. I roam a lot in my work and I I use a sprint PRL file when out of town because I get better coverage. When I get back home all I had to do was use a program on on my custom rom called "update PRI", then do *228 and I was back on USCC. Well I tried a different ROM, and when I did the "update PTI" thing it now locks me in sprint and gives me the PCS vision error screen. I have sense learned that the this program was just a short cut to ppst.exe and that this rom had a newer version that really screws up non sprint users.
So I flashed back to stock and everything works no problems, but if I put in a custom rom, no matter who's I get the PCS Vison error again. I can't get rid of it. I have done ever thing I could find to no avail.
So can any one tell me how to get rid of this thing? Please!!!!!!!
One of the tricks I wanted to try was to us QPST to save the stock setting and then reload them on a custom rom. Unfortunately I cant get my stock rom to let me into DIAG mode I have tried dans ## cab, no go. Tachi dialer, no go. So even if you can't help me with my main problem, If you could help me get into DIAG mode on a stock USCC rom that would be helpful
Thanks.
Problem solved!!!!
Droobie over at Howard forum got me through it. I was using the latest ROM fron USCC to go back to stock and did not realalize it was not the same as the shipped rom. Droobie got me copy of the shipped rom and that solved the problem.
After 4 days of headaches, hats off to Drobbie
so i bought a used vibrant off of a guy i know. And it worked perfectly. After a few days the phone just stopped working when i tried to do a factory update. Now the error i get when i try to make a call is "network not available" and where my bars would be it shows a circle with a line through it. I have tried booting on flashed roms and i have tried putting on stock 2.1, i have even tried to put the unlock code in, but nothing works at all!!! tmobile has no clue about anything and just keeps telling me to hard reset or send it in for repair but i have no insurance and i cannot be without a phone!!! please help me asap. i have also tried to go to select network and nothing comes up at all it used to say att and tmobile now nothing?? i am clueless here?!?!?!?! everything else works on the phone just no network as in wifi, market place etc. and i know its not my sim as i just got a new one and tried in my friends vibrant and it worked!
You might need to add the APN manually maybe?
Where you went to search network goto access point names and click on tmobile
The APN should be : epc.tmobile.com
MMSC should be : http:/ /mms.msg.eng.t-mobile.com/mms/wapenc
MMC should be : 310
MNC should be : 260
APN type should be : Internet+MMS
Just a suggestion but you could always just odin back to a factory fresh install. Sounds like the OTA update that you installed hosed something. Are you getting any SIM errors or anything else?
if u can (via wifi or something) download Rom Manager from the market and click on "fix permissions".... see if that helps.
all the settings in the apn are corect as per what the values you typed should be, i have rom manager and tried the quick fix with the permissions, nada, and this is the strangest problem as my sim card is reading as all my sim contacts are showing...so i know the sim card slot is not the issue, and when i tried to flash back to stock using odin 2x now, it still leaves out the calling feature, i was thinking maybe it has to do with the modem in the phone and somehow it got deleted for good unless i reinstall it???
clubstylenyc said:
all the settings in the apn are corect as per what the values you typed should be, i have rom manager and tried the quick fix with the permissions, nada, and this is the strangest problem as my sim card is reading as all my sim contacts are showing...so i know the sim card slot is not the issue, and when i tried to flash back to stock using odin 2x now, it still leaves out the calling feature, i was thinking maybe it has to do with the modem in the phone and somehow it got deleted for good unless i reinstall it???
Click to expand...
Click to collapse
This might be the fix you need. Download JFD tar and 512 pit files. It is a stock build that should completely clean and reinstall all the correct files needed. When you flash into Odin3 make sure repartition is UNTICKED or it will not work! I've had plenty of issues in the past and JFD has resolved every last one of them. J16 helps, but not with everything. Probably because it's just an update file.
Sent from my SGH-T959 using XDA App
This guy didn't happen to try unlocking the phone and mess anything up in the efs folder did he? Like the imei number....
Sent from my SGH-T959 using XDA App
As far as I know the imei is good according to the tmobile store I just,went to and I,tried the odin method it did not work do I need to reinstall the radio band somehow maybe?
clubstylenyc said:
As far as I know the imei is good according to the tmobile store I just,went to and I,tried the odin method it did not work do I need to reinstall the radio band somehow maybe?
Click to expand...
Click to collapse
What do you mean by it didn't work? The JFD file did not flash successfully or it did flash successfully, but you are still not getting a network signal? If no network signal then I advise you call T-Mobile and tell them you are having gps issues and they should replace the phone as long as it's still under warranty. It's worth a try. The worst they can say is sorry your warranty is expired.
Sent from my SGH-T959 using XDA App
the flash worked as in it was successful but no network still comes up. i called tmobile but since i bought the phone originally not from tmobile they said bring it back to the person you bought it from. tmobile even resent the signal to my phone and i was on the phone for over and our with them doing the same thing over and over, but to no avail. before i throw this phone on ebay for parts.... any other ideas???
ask the guy you bought it from.
Sent from my SGH-T959 using XDA App
did you check if airplane mode was on. i had it sometimes hide in the menus but never said in the notifications
So I checked airplane mode and nothing. It wasn't on that so still no fix. And the guy I got it from said he didn't do anything but I think he bsing. Is there anyone in the new york area that thinks they can fix this. Even if for a little fee it might be worth it?? Let me know asap I need a phone.
i guess no one found a fix for this as i still have the phone and the repair shop i got it back form seems like they didnt know what to do at all, even changed out the sim card slot to no avail.
clubstylenyc said:
i guess no one found a fix for this as i still have the phone and the repair shop i got it back form seems like they didnt know what to do at all, even changed out the sim card slot to no avail.
Click to expand...
Click to collapse
Does turning flight mode on then off let it come back online? The issue is a werid one, but has been popping up around the forums. I wish I had a concrete answer for you. When you Odin back to stock JFD firmware, it replaces the modem entirely and should set you back to how it came from the factory. If thats not working, I would go get my money back.
Could you fix your problem with the phone? I'm having the same problem here. The weird thing is that my phone is unlocked and it works with an AT&T sim card, when I try my T-mobile card, I can't make calls. I tried everything, flash back to stock with Odin, manual settings, Airplane mode off and on, around 10 different Roms, and a bunch other suggestions but I still can't make it work. Any help will be greatly appreciated.....
jmcghee1973 said:
You might need to add the APN manually maybe?
Where you went to search network goto access point names and click on tmobile
The APN should be : epc.tmobile.com
MMSC should be : http:/ /mms.msg.eng.t-mobile.com/mms/wapenc
MMC should be : 310
MNC should be : 260
APN type should be : Internet+MMS
Click to expand...
Click to collapse
Did you check these settings under Mobile Networks--AccessPoint Names? Do you see T-Mobile US as the selection? If you do, make sure the settings are as described here.
Flashing to stock would have fixed any issues that were software related... sounds like you have a hardware problem. You should odin back to stock.... wipe data/factory reset.... then flash again just to be sure. I've had funky issues that this has helped in the past
clubstylenyc said:
the flash worked as in it was successful but no network still comes up. i called tmobile but since i bought the phone originally not from tmobile they said bring it back to the person you bought it from. tmobile even resent the signal to my phone and i was on the phone for over and our with them doing the same thing over and over, but to no avail. before i throw this phone on ebay for parts.... any other ideas???
Click to expand...
Click to collapse
Try flashing Eugene's froyo that does not brick, here it is, it might fix the problem. HERE it is, try it, maybe it will work.
I have "mobile networks not available" problem also.
I flashed theese roms:
http://forum.xda-developers.com/show....php?t=1061889
http://forum.xda-developers.com/show....php?t=1021383
Problems are same for theese two problem.
1- There is no mobile network data. When i want to make call, it says, "mobile network not available".
I did the apn fix (set to default, reset etc.) No working.
I opened *#*#4636#*#* and do somethings explaning under "fixing network problems" threads.
Theese all not working.
I'm looking for help. This problem is not about sim card or operator(t-mobile etc.). Because a lot of people have same problem from all world. Every thidsd people using different gsm operators. So, fixing method with sim cards not working. This problem is about rom. Because, when downgrade to Android 2.1 or 2.2, there no problem. Please help.
2- Second problem is powering off it self every 15 minutes. All theese two roms have this problem. Not every time after 15 minutes. Sometimes after 10 minutes, sometimes after 40 minute (after boot).
2.1 and 2.2 also don't have this problem.
Please help.
There is a lot people on world using CyanogenMod. And they are flashing this rom with same method with rom manager.
Why this rom have problem about mobile network and powering of.
Thanks.
Click to expand...
Click to collapse
I have recently rooted my phone, and installed the devoid.franco v5 rom on my phone....I get no data connection. When I go into the about phone, status, and look under mobile network state, it says disconnected. I am with Koodoo and had data access before I started flashing roms on the phone. I have been through a couple of different ones, all with the same results. What am I missing? Did I do something wrong? Everything else looks ok. Any help would be greatly appreciated.
Thanks
Well the original rom must have been customized for your region and hence had all the APNs and you could access internet without problems.
Now devoid is based on some other region's rom and hence might not have the APN for your operator. You will need to setup your APN manually. Check with your operator for settings.
Another method is to flash back to the original rom. Note down the APN settings and use them on devoid.
Hope it helps.
Happened to me too, manually entering the APN settings did the trick!
Thanks....makes sense. Working on finding the right entries...being at work makes it difficult sometimes.
Edit: Of course finding the right values to put in is another story....geez!!!
Got it!!! Thanks for the direction.