rilpone.dll CIF.dll - Touch Pro, Fuze ROM Development

hi guys,
hope you can help,
i have an htc touch hd French SFR ROM.
i bought spritebackup htc pack-
i got warning after a restore :
impossible to restore these 2 files :
rilphone.dll and CIF.dll
what can i do ?
my phone will work bad now ?
thanks for your replies
Arnaud

No worries

Both the CIF & RIL libraries are both called upon at boot up. Sprite cannot overwrite process that cannot be stopped. You would need to kill the radio to be able to get those overwritten.
Are you trying to upgrade to a new rom then restore? Sprite is meant more for PIM & program restoration, not system libraries & drivers that are in ROM. A better option for installing & customizing things is UC or Sashimi. For PIM & low end proggies, Sprite is just fine. Although with MyPhone from MS, you have native back up & sync of PIM, Doc & Pic/Video, etc. files.

Hi
thanks very much for your answers guys,
i was not trying to upgrade a new rom or restore.i only was doing a backup and then i was tested this backup with doing a restore.
thanks for all.

Related

Backup/Restore after ROM/RadioStack/EXTROM UPGRADE/DOWNGRADE

:?: I think I have done my homework, having searched the Forums for help here, but I am still boggled.
I enjoy trying out the new ROM's and Radios as they come out, but am tired of resetting everything on my machine after each upgrade/downgrade. I understand that it is unsafe to backup and then restore to a different ROM version, but need some stratgey to minimize continued reloading and resetting everything each time I upgrade/downgrade.
Questions: If changing only a Radio Stack version, leaving the ROM and EXT ROM versions unchanged, can I do a full backup and then restore safely?
I am also confused as to what the best, most complete backup method might be. I have too many options. Backup in Activesync, import expoert databases, xBackup or Permenant Save on XDA II, .reg backup from reg editor?
Is there another program that is better than any of these options?
Would one of you XDA II Wizards help out us novice apprentices and post a tutorial explaining the real story about backup/restore when switching ROMS and Radio Stacks? Your efforts would be appreciated.
Steve :?:
I think the best backup/restore application is the Sprite Backup.
I have ab. 65MB in my XDAII memory.
the backup time to 256SD card
- with xbackup: ab. 45-50 minutes
- with Sprite Backup: ab. 15-20 mins
the restore time with Sprite: ab. 6-8 mins
It's restore everything (registry, settings, colours, cleartype...etc)
May the Sprite can changes the ROM version num., but only in the registry, but the XDA is working fine with the new ROM.
! When you backing up by Sprite, don't include the mail boxes, because cannot restore it perfectly, and may you cannot send or recieve SMS,
and need to hard-resetting again!
Try it! Good Luck!
hhmmm it may be me but i havent seen any stand alone radiostack upgrades for xda2's and if you manage to put a xda1 radiostack on your xda2 device you got a brand new hitec doorstop on your hands i would suspect
like with the xda1 i would say that radiostacks should never be changed unless ones cellphone company advice it and are willing to help out should it go horrably wrong
with roms you can change and reflash and such but with radiostacks its not anywhere near as easy to get out of a tigth spot
about backup then i suppose it depend on what you want to backup
permenent save only save contacts and appointments and connections settings and such
kinda like if you just sync with outlook
the different backup programs plus the activesync in outlook are a different matter
if you change your rom then i would not restore a backup from the older rom
since a backup is all changed and programs and settings added to the device since hardreset
since you are talking about a new rom then some settings may not be there anymore and some programs may not be there default and such
restoring a backup from an older rom could result in you having to do a hardreset because of a lockup or just a less stable pocketpc

New ROM & Sprite Backup Question

Hello All,
Need a little heads up please.
If I update my HTC TP from the original official to the lastest official ROM, can I reload everything via Sprite Backup and be back to where I was in terms of apps, data, settings etc?
Many thanks?
I would use PIM backup. If you know how to use sprite then use that. If you don't know how to use sprite then you will end up backing up system files and causing the new ROM to become unresponsive.
Thanks for that

Save ROM config

Hi!
I have the Energy rom on my TP.
I want to upgrade to the last rom avaliable all the time.
If i use a software like Resco Backup, is it possible to perform a full backup, flash a new rom and then restore my full settings and customizations and aply to the new rom??
thanks!
tntnt said:
Hi!
I have the Energy rom on my TP.
I want to upgrade to the last rom avaliable all the time.
If i use a software like Resco Backup, is it possible to perform a full backup, flash a new rom and then restore my full settings and customizations and aply to the new rom??
thanks!
Click to expand...
Click to collapse
You can chose whatever backup software you want. Sprite offers a restore after ROM upgrade, so does SPB but be assured that in 8 out of 10 cases it will FAIL, your brand spanking new ROM will be messed up, sluggish, unresponsive.
The only way these backups DO work is a 1:1 restore. Let's say you back up, installed a theme, phone hangs or you don't like the theme and cannot convert back.
Hard reset SAME ROM --> Restore --> > Done.
Get accustomed to MyPhone, PIM copy, UC, Sashimi and other tricks because you wont be happy with the restore.
Catch phrase --> "Trust me!"
agree with tyguy...
PIM Backup, SASHIMI, and UC is very useful in backup/restore... I use them all
r04d5t3r said:
PIM Backup, SASHIMI, and UC is very useful in backup/restore... I use them all
Click to expand...
Click to collapse
There are SOME things that will work that way. If you use Sprite Backup, you can decide which things to restore. If you avoid restoring the registry, you can still use it to restore selected items like PIM databases. I used Sprite Backup but it has become unusable and it seems the company has stopped responding to support requests. AFAIK, SPB doesn't offer the ability to select but I may be wrong.
I'm curious about one thing though. When using things like PIM Backup, what usually happens is once I sync, all PIM Info gets duplicated (Active Sync thinks the data restored via PIM Backup is something "new"). Does anyone know a way to fool Outlook/Active Sync to not behave that way?
If like me you have meetings and contacts in the thousands, using Outlook/Activesync to restore PIM info to the phone after flashing a new ROM takes a really long time...
I can confirm that newest version of SPB Backup never worked for me on EnergyROMs. I could not connect to gsm network even on a same ROM. Sprite Backup works like a charm, but only on the same ROM. It is good just if you are installing something you never know what happens. So it could work just like some restore points in windows. As the guys here said, best method is to learn UC customizations, Sashimi, but i have to say, it is not that easy, for some people...
i work with SPB Backup with ROMeOS and it worked perfektly even on different ROM Versions. I tried to restore a backup made with SPB Backup under ROMeOS WWE and restored it under GENY GER Version, worked without Problems after changing some names/pathes in the registry (Speicherkarte => Storage Card etc) depending on the language. Not working links like Total Commander werent in the installation of GENY in the main memory; they run after installing TC in the windows directory; for me the Speed was absolutely ok, but i dunno, how fast it would be if you work with UC. I restored all my BUs since ROMeOS since version 1.4 until ver 2, but then i decided to install everything new, what took 2 weeks of braincooking but i got 50 MB more free RAM. Of course its better to install everything new, but if its a complex program & settingsstructure, with a lot of tweaks, colored task bars and so on it is much easier & faster to restore a BU...
SPB has the opportunity to choose which parts of BU you want to restore ... from complete restore (with ROM Upgrade mode/ phone Changing mode) over all or single databases to even single files, if i remember right...
Greetz
Boris
P.S.: i only worked with WM 6.1 ROMs
If I'm in the right mood I'll start a new thread under the general Raphael section because I think this does belong here to the ROM dev. section.
Just in a nutshell:
Sprite has and had major problems if the basic SYS changes dramatically (WinMo 6.1 to 6.5 or 6.5 to 6.5.3) thus I stopped using it BUT it has a nice but not really great working "Restore after ROM change feature".
My basic tricks are:
PIM Backup with SPB
Sync with MyPhone
XML changes (like program paths etc.) with Adv.Config
Install with Sashimi
Copy with Total Commander (programs, Opera settings and bookmarks).
Username and personal data either manual input or Sashimi.
This worked since WinMo 5.0 with no issues and it takes me ~ 30 minutes after a flash to be back 99.9%. I do have to install a few things manually
Don't have much time now so I'll post the link to the "How To" later today.
You can actually do a lot with just pimbackup. The custom option is pretty cool-it allows you to backup and restore custom files, much like sashimi does, except that once you set it up, it will do the backup for you instead of having to do it manually. If you uncheck the 'binary' option, you basically just get a zip file with a directory of all the files you selected for backup.
There's a lot that can go wrong using sprite or a similar app. Even if you don't restore registry settings, you might insert something into the startup folder that screws up your phone (it's easier than you'd think, lol). A week or so ago, I decided to try running a task manager at startup (IT Task, which is really cool), and for whatever reason, when you put a shortcut for it in the startup folder, you have major problems booting up the phone. After about 10 tries, I got lucky and the phone booted up, so I didn't have to do a hard reset (which I wasn't fully prepared for).
You're probably ok restoring with sprite if you stick to the same rom-line, but it could certainly be a mess if one chef stores apps in \program files but the new chef has them all in rom (in \windows). Then you'll end up with two copies of everything, which is a waste. It may work, but it's a lousy way to go.

[Q] HTC Mozart backup and restore ...

I want to reset my HTC Mozart (Mango 7.5) for some reason but want to take a backup of the entire phone so can restore after reset. I've Zune 4.8 on my PC.
Any idea how? I could find any option in Zune or in phone to take backup.
cheers...
Hi,
If I understand your issue correctly then you want to do a full backup before fiddling with your phone.
This is possible via the WP7 Backup via Zune (although not officially supported, there's a great application for that purpose: http://forum.xda-developers.com/showthread.php?p=14258464#post14258464).
You only need the correct DLL (see links in the topic) and the Windows Phone Support Tool.
The backup process using this tool is straightforward and contains ALL data (SMS, contacts, you name it ).
However, you can only restore 100% of the backup - e.g. there's no possibility to integrate the SMSs you received after creating the backup.
You will also end up with the applications and the WP7 version that was installed at the time you created the backup!
If you are looking for means to backup your data now and restore them to a different WP7 version or different installation, then I have to disappoint you for now - there is currently no possibility.
But there are people working on it
hmm, thanks for the link and information but seems like I'm not that much guru
I would wait for some easier solution and will do the backup manually.
cheers ...

Upgrade ROM version - setting backup&restore possible?

Hi, I plan to upgrade my older Artemis ROM to the current version. Is it possible to backup the installed apps, the contacts/ desktop setup (shortcut icon placement, widget settings), etc?
And of course to restore them with he new ROM. Pretty much what Titanium Backup does for android.
Or do I have to save everything manually somehow?
PS: I did a search
Hi GabbO2,
I have the same plan. Currently I'm on V64 and also using CHT 2.0.0.0. I made a backup of the CHT settings, a backup of the Artemis settings with Artemis Center and a full SPB backup. Almost all of my apps and all my data are on the storage card, so they don't need to be installed after flashing. For apps necessarily to be installed on the intern storage I use the cooked in Mass installer. Please take a look in the Artemis thread help files for a detailed overview of the Mass Installer funcionality.
1. Flash ROM
2. Mass Installer
3. Restore CHT settings
4. Restore Artemis Center settings
5. Restore SPB backup
As far as I understood from what I've been reading here on the forum, that's what has to be done to get my familiar settings back after flashing a ROM. I will use this procedure tomorrow, when I have a little time.
The preparation for this is a little bit time consuming, but you will only have to do it once and then you got a full sytem recovery.
Regards
Getrid
(phhhh, after following the board for a long time - finally my first post Big thanks to all board members from whom I learned so much and still learning)
Danke, very helpful
Be carefull by using SPB backup.
Due to user reports in the past SPB backup saves and restores also system files, which could cause problems.
contacts / appointments / SMS can be saved by PIMBackup
@Getrid: Congratulations to your first post.
uli71 said:
Be carefull by using SPB backup.
Due to user reports in the past SPB backup saves and restores also system files, which could cause problems.
contacts / appointments / SMS can be saved by PIMBackup
Click to expand...
Click to collapse
Oh, I'll keep that in mind. So deselection of the system files option in SPB Backup should prevent trouble, right?
uli71 said:
@Getrid: Congratulations to your first post.
Click to expand...
Click to collapse
Thank you very much!
spb it can mess with your sim so take it out befor u back up
Taking out SIM and SD card before flashing a ROM via USB is mandatory to me. I know, it's usually not recommended, but I like to secure things
Anyway, thanks for the advice.

Categories

Resources