Related
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
If you are looking to replace your 8125 case here's an excellent deal.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=360011196557&ssPageName=STRK:MEWN:IT&ih=023
I've purchased one of these and it includes all the buttons. The antenna cover already had the antenna installed. It even included the black rubber gasket around the display. All I had to move was the ear piece and the vibrator.
I don't know if they are take offs but mine was in A+ shape. They don't include the back cover.
Awesome!
Beats paying $50+ for a new shell...
My only question is; can you move the MDA circuitry to the 8125 shell? Seems logical, seeing as both are the same hardware.
Great find... They also have the wiz200.
thesebastiancat said:
If you are looking to replace your 8125 case here's an excellent deal.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=360011196557&ssPageName=STRK:MEWN:IT&ih=023
I've purchased one of these and it includes all the buttons. The antenna cover already had the antenna installed. It even included the black rubber gasket around the display. All I had to move was the ear piece and the vibrator.
I don't know if they are take offs but mine was in A+ shape. They don't include the back cover.
Click to expand...
Click to collapse
Too bad they don't ship to India...i'd really love to get a new housing for my trusty 8125 as i still intend to use it for sometime...maybe someone can help me out???
i buy from them mask for my qtek9100 and just to know this is old used,in verybad condition mask.Not new
hmm...
If anyone else orders from this seller, can you please post whether or not the parts are in new condition?
Thanks
madnesss99 said:
i buy from them mask for my qtek9100 and just to know this is old used,in verybad condition mask.Not new
Click to expand...
Click to collapse
I got the same housing from this seller and it's brand new! No scratches, no nothing. Just be aware that it does not include the battery cover.
joel32137 said:
hmm...
If anyone else orders from this seller, can you please post whether or not the parts are in new condition?
Thanks
Click to expand...
Click to collapse
I bought one from them and sent a message to them that there was a chip in the corner of one of the pieces.
In the auction listing, it states that they may come damaged but should not affect working order.
So...be aware that there may be cosmetic damage.
They were kind enough to send a replacement, which I should be getting in a few days.
Hopefully, it will be a new piece.
Update:
These guys are great....well in my case anyways.
In the previous post I mentioned that a had a chipped corner on the housing and requested a new piece.
Well, those guys sent out a whole new setup..this one was in great shape....dont know if it was new, but looks practically brand new.
There was never any questions on their end...they just sent out another one.
I would recommend them highly. Great customer support.
O btw, I told them I would send the original one back...they said to keep it.
WOW...top notch guys.
I just ordered one of those cases i'll make sure to let you all know how it comes when i get it!
Very Nice... there were a few minor scratches on the corners and buttons but other than that the housing i bought for my wizard was in great shape! no battery door cover tho
can some post a pick of the how the device looks in this housing?
got mine. no back cover, no screws. so what, do i use the screws from my wizard shell to close the new 8125 shell?
http://www.youtube.com/watch?v=7409Gq51RFE
Gotta check this out.It's alot cheaper than others.
Thanks
I got a Wizard 100 (Cingular Branded) shell. It looks brand new.......not one scratch on it. It didn't come with a battery cover though
Ordered it last night...Should be here middle of the week.I hope it's in good condition.
anyone knows where i can get some extra screws?
i was about to assemble the wizards guts in to the new shell, but the keypads dont line up, if i go along and assemble, i wont have use of the send call button and the end call button, and some other buttons as well
Good Deal
The one they sent me was in great shape!!!
I just ordered a shell for my T-Mobile branded Wizard 200....I hope it will be practically new like the Cingular Branded Wizard 100 shell I ordered earlier...
Hey guys,
My white unlocked Hero has sustained some nasty body scratches plus it is starting to turn yellow. I'm considering a full body replacement. I was only able to find this:
http://cgi.ebay.com/GENINUE-HOUSING-FACEPLATE-FACIA-GOOGLE-G3-HTC-
HERO-WT_W0QQitemZ280402919652QQcmdZViewItemQQptZPDA_Accessories?hash=item41495100e4
Do you think that it's going to be as good as the original one? The seller claims that it's genuine, What do you think?
I found a site that has both the black and white housing for the gsm hero.
http://www.truesupplier.com/faceplate-housing-cover-for-htc-hero-g2-touch-white-color-pr-18489.html
How do I know that it's genuine? or at least as good as the original HTC cover?
slimfady said:
How do I know that it's genuine?
Click to expand...
Click to collapse
The web page is called "truesupplier.com". OF COURSE its genuine
How hard is it to change the housing anyway?
by changing housing you will probably break phone trust me ... and truesupplier housing is oem not genuine by looks of it..
He might not break it if he's careful, and has the proper tools. I've taken apart a few phones without causing any problems.
So unless i'm handy at doing these things, I should not do it myself?
What if I have our local HTC agent do it? Will it at least look as good as new?
i have the white hero and would love to put the black case on it.
the site mentioned above says it comes with the tools needed to change the cover, has any tried doing this?
i would love to go for it but don't want to f*&k my phone up!
i think its not so difficult to switch the cover if you take off the backcover there are 6 screws than open the case from the top of the mobile phone and pull it off
but becarefull maybe there are flatcables from die lcd or the trackball just make it slow and be carefull all the time
and maybe you can find a dissembly how to in google
peace
this site has pics of disassembly of a hero but it's in russian.
http://www.pdacenter.ru/razborka/htc_hero/
If you have to pry the phone open use something plastic so you dont damage the original case. Just in case the ebay housing is rubbish.
hawwy said:
by changing housing you will probably break phone trust me ... and truesupplier housing is oem not genuine by looks of it..
Click to expand...
Click to collapse
whats the difference between oem and genuine
any1 bought replacement white hoising? mine is getting yellow. so need to buy a back cover.
Thinking of buying one myself. I accidentally dropped mine on the tiled floors of my workplace toilets LOL (luckily not IN the toilet). so now there's a little nick on the top left corner of the case.
If this is your first time you will probably scratch the covers but nothing more. You need to be very patient and i will suggest take a look to a good tutorial.
iopened my hero 1 week ago and its so easy maybe in the next days i will upload a video in youtube
bye
I bought the ebay one. It's surprisingly well built (Not Teflon though).
The sad part is that my touch screen got screwed up during the installation. The bottom part of the screen is no longer functional and the sensitivity is messed up overall. Did the replacement in a local phone shop.
Now trying to find a way to fix it.
gyounut said:
iopened my hero 1 week ago and its so easy maybe in the next days i will upload a video in youtube
bye
Click to expand...
Click to collapse
That would be greatly appreciated!
hmm do you want to sell me your backplate of your old case? i need it please
and to fix your problem : you need a new display glas with digitizer
to remove your old glas: use a hairdryer, you have to heat up the old clue of the old glas and than you can push it easily out of the frame but be carefull not to heatup the frame, the plastic can deform, maybe you can cover it with aluminium foil from the kitchen
the video of the dissembly will be uploaded tomorrow by me
good night guys!
slimfady said:
I bought the ebay one. It's surprisingly well built (Not Teflon though).
The sad part is that my touch screen got screwed up during the installation. The bottom part of the screen is no longer functional and the sensitivity is messed up overall. Did the replacement in a local phone shop.
Now trying to find a way to fix it.
Click to expand...
Click to collapse
Where can I find new display glass for HTC hero? or can I just buy something generic?
I don't mind giving you my old backcover though it's in a very bad shape (which is why I wanted to replace it in the first place).
Theres some great deals on ebay on new housings, has anyone here successfully transfered the touch screen to a new housing? Its glued on there I think, Ive had mine apart before to replace a button but the screen is a different story, can it safely be done? Any tips? Hoping for some insight, thanks
A friend of mine has an ATT Titan (phone says PI39100) with a cracked front glass. I was looking to purchase a new front lens/digitizer for her phone and do the replacement. Most of what I find online are for the x310e.
Long question short: is the front lens for the x310e the same exact one as for the PI39100? or are the two not compatible?
Also, if someone can point to a DIY for doing this I'd appreciate it - otherwise, i'll take on it the same as the Galaxy Tab 10.1 I did earlier this week (using a hair dryer and an exacto knife) I would like to at least know the lens is the same so I can order soon.
Thanks in advance.
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
malvo26 said:
The screens are the same. The only difference will be that the new screen will have the HTC-Brand name instead of AT&T. Is it just the glass cover that's broken or is the whole touch screen? You can either replace just the glass cover or the entire touch screen. At least that is what I understand because I've seen both parts offered separately.
Regarding the DIY replacement have a look here:
http://forum.xda-developers.com/showthread.php?t=1569714
Hope this helps.
Click to expand...
Click to collapse
Excellent. This is EXACTLY what I was looking for. Thank you VERY much for your assistance
Oh, and it's the glass cover that's broken, because she's still able to (and currently continues to) use the phone. On ebay, I've seen the glass and digitizer going for under $30 shipped, so I think it's reasonable enough.
Thanks again. :good:
Glad to help. That's we are all here for: help each other.