Related
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
I have the PDAir Aluminium one, and think it's great. I'm very rough with my electronic toys, since they are "tools" for me, and a good tool has to stand me Also bought some pretty leather case (don't remember the name), because I thought it would be a bit smaller than the PDAir, but it wasn't, and you don't see the screen with those, so I'm back to PDAir. Looking at all the scratches it already has, it seems it does it's job well...
Re: Opinions on this wizard case? Seems to fit great and pro
xboxhaxorz said:
http://search.ebay.com/search/searc...ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1
I have a krussel case for my nokia 6620. I thought another krussel would not be a bad choice. Although if anybody has a wonderful case they can suggest that is great.
Basically i want a case that is always on, since i can drop the unit when its not in the case that was included.
Click to expand...
Click to collapse
Is it possible to extend the keyboard without removing the phone from the case?
:?:
Yup I got the solid aluminium for travel and running around and the Krussel Cabriolet is on order for evening out or light use.
Cy
I think Krussel is the best. The prices are another story, this is about 50$.
http://cgi.ebay.com/BLK-PIEL-FRAMA-...3QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
does the cabriolet from krusell protect the screen with some type of plastic over it? or does it just expose the screen?
this is the one im referring to
http://cgi.ebay.com/Krusell-Leather...QQihZ008QQcategoryZ108604QQrdZ1QQcmdZViewItem
That case doesn't protect the screen at all
Is it just me, or are the Monaco and PDAir cases identical (including the same pictures!)??
Monaco vs PDAir
More importantly, does anyone see a problem with one of these Case & Car charger combos on ebay?
has anyone ever got/seen one of these before?
http://cgi.ebay.co.uk/Black-Alumini...0QQihZ005QQcategoryZ48673QQrdZ1QQcmdZViewItem
looks absolutly fantastic, and lets you use the keyboard too.
Cases
Hello there. I have the silver aluminum case. I really liked the case after I got use to it. The only problem, my phone would freeze. Lock up totally. Only way out was to hard reset the phone. I know this sounds rediculous, but I've ruled out everything else. Ever since I stopped using the case my phone hasn't needed even a soft reset.
Currently I am using this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230007898731
But I just heard about this on XDA's site:
http://cgi.ebay.com/Cingular-8125-V...ryZ48673QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Hi,
Here it is from Clove!
http://www.clove.co.uk/viewProduct....&product=1D0A78F8-C643-40C0-A006-1157B4C8200C
£45.83 inc VAT
A bit expensive considering their active car holders are usually £33-ish.
Will defo get one when it is available in more places!
If anyone has got one already, please post a review
Thanks.
i have a Brodit passive holder....
just a quick comment on it..
I have had a brodit holder for every PDA i have had for the last X amount of years and have never been unhappy in the least bit...
When i picked up the holder for the TC from the local shop here in Sweden, I looked at it and said "boy that looks tiny".... i thought maybe my head was playing tricks on me...
i took it out of the package at the counter and tried to shove my phone in it.... I would have needed a crow bar, and elephant and some butter to get it in there....
luckily the shop that i bought it from also doubles as a car stereo installation/ car mod shop.....
one of the guys from the shop was there and whisked me into the back and got out his heat gun and heated it up and together we made it fit to a T.
now it is perfect and i love it....
(i wonder, did brodit try to make this only with dimension from HTC, or had they an actual unit during their manufacturing process???)
anyway now i am once again a satisfied Brodit customer....
Proclip
I just got my holder yesterday. While tyhese are a little more than all the others I have seen it looks to be about the best holder I hqave ever had. I had one of the cheap ones off ebay and it broke already. This one seems to be very well made. They offer a few different models for the TC. With or without tilt or charger. I got one with the tilt and I like it. For what these phones cost it is worth it to get a quality holder for the car.
This my carholder-active, orginal for P3300
I got the Brodit as well as I've used them before and they are really well made....that is, except for this one which is as tight as you like. The o2 orbit2 does not fit it properly and I'm now having to debate sending it back vs. finding someone with a heat gun !!!!
In fact, I returned it and have just received another one....problem is that this one is even tighter. Will now have to find someone with a heat gun !!!!
Mine is a tight fit too but far better than the one I had for my last pda. If it isn't tight it buggers up the mini usb connection. The fitting kit for the car works fine too but it would have been better if the curley cable was shorter and the straight bit from the mount was longer just to make it easier to route the cable.
If you're looking for a car holder for the touch cruise, go to best buy in the auto dept., look for one made for the iphone and ipod both. It is around $12 and clips onto your air vent. The cruise fits in it perfectly.
I was going to buy this Piel Frama case for my Rhodium, but I can't really see from the pictures whether I have access to the mini-USB or not. Anyone who can enlighten me? Can I use my headset while using this case?
Of course, I could upgrade to this wonderful case, but it is more expensive ordering from Spain, and it does look a lot more bulky than the classic model. EDIT: Ordering from Norway, it's around 400 NOK for the Classic case from the US vs close to 700 NOK for the iMagnum one from Spain.
Alternatively I have been looking at this PDair case which is a good deal cheaper, but I haven't found any reports on its durability and general usefulness yet. Did anyone here try it out? If so, is it any good?
While searching for the others I also found an aluminum exoskeleton of sorts and it does look cool I think. It doesn't add too much size and weight to the TP2, so it might be a contender as well. Again I ask for opinions
Hy
when i bought my TP2 i got a case very similar to the second one you post (this wanderful case)
i never used it.
it makes the Ppc huge. extremely unconfortable.
at the moment i am using a case which was designed for iphone or something like that.
it has a clip for the belt and a hook that goes on the jeans. it's basically like one of that sock but a bit better.
it's much slimmer, easy to access, secure and when i use the phone i don't have the case attached.
my suggestion is not to buy that cases, but go into some shop and try some up
ciao
fabrizio
mhurg said:
I was going to buy this Piel Frama case for my Rhodium, but I can't really see from the pictures whether I have access to the mini-USB or not. Anyone who can enlighten me? Can I use my headset while using this case?
Of course, I could upgrade to this wonderful case, but it is more expensive ordering from Spain, and it does look a lot more bulky than the classic model. EDIT: Ordering from Norway, it's around 400 NOK for the Classic case from the US vs close to 700 NOK for the iMagnum one from Spain.
Alternatively I have been looking at this PDair case which is a good deal cheaper, but I haven't found any reports on its durability and general usefulness yet. Did anyone here try it out? If so, is it any good?
While searching for the others I also found an aluminum exoskeleton of sorts and it does look cool I think. It doesn't add too much size and weight to the TP2, so it might be a contender as well. Again I ask for opinions
Click to expand...
Click to collapse
That aluminum case looks like the tp2 would slide around in there. I've tried a few cases, but they all added too much bulk. Did find a cheap clear plastic one, and it's awesome. Looks great, fits better than any other ones, and adds hardly any bulk. CHeck this thread out.
http://forum.xda-developers.com/showthread.php?t=578050&highlight=clear+hard+case
This is what I have. It does add bulk to the phone but has saved my phone twice already.
http://www.amazon.com/Body-Glove-Elements-Rubberized-Tmobile/dp/B002JQRW68
Comes in 2 configurations, 1 for belt clip and other for pocket. You cannot have both as there is a notch at the back which is interchangeable depending on how you want to use the case.
* Another thing, I believe this case was designed more for the Touch Pro 2 for t-mobile as I don't have issues like the other reviewers had.
Tmob Version TP2 seems to be an Orphan amoung case makers
I am in the same boat trying to find a nice case that my phone does not have to be removed from to be used. In the past I went with Krusell cases and that was great for many years and different devices now the Krusell for the TP2 is known to be junk.
I would buy Piel Frama magnum from your post If I had the Reg Ver Tp2.
http://www.pielframa.com/htc-touch-pro-ii-imagnum-cases.htm
Unfortunately I have the USA T-mobile Version of the TP2 and this phone is turning out to be the bastard orphan amoung case makers.
I have narrowed it down to two cases and would like any opinions for my Tmob TP2
Proporta Aluminium Lined Leather Case (HTC Touch Pro 2) Model 30263
http://www.proporta.com/F02/PPF02P05.php?t_id=4871&t_mode=des
Noreve HTC Touch Pro2 Tradition leather case Model 21526 (Not sure if this will work with my Tmob version It says "Not for T-Mobile MDA Vario version" I have never heard to TP2 called MDA Vario
http://www.noreveusa.com/brand/HTC/product/HTC_Touch_Pro2_Tradition_leather_case.html
a small rant.........
With so many versions of the same model phone the waters are becoming murky. I wish they would just give them different Model Numbers and Names.
Thanks and Best of Luck with the search for the best case for our phones.
JK Minoch
Just got my Touch pro2, with a htc pouch and htc case.
Case is fine, but I dislike to have to open it to get the phone out. Also, I can't use the usb while in the case, another deal breaker.
The pouch is better, but would like more protection.
What I found perfect is the slide case I got with my Touch pro. Sure one can get better protection, but considering how fast was to use the case and how small the case is, the phone looks like new without any scratches.
Any recommendations for such a case?
Last night i purchased ...
...the clear acrylic case from the AT&T store. It is a 2 piece case that snaps on AND has a touch sensitive screen protector. I do not like the plastic belt clips as I have bumped/snagged them on things and broken the clip. I prefer a holster type case (horizontal) as i carry another object directly on my side/hip.
the best would be a richter/HR-compatible plate as i have the acessoiries for other handsets in this system
I'm using my old HTC Hero Richter plate. Fits okay and no marks yet on my white Blade after 3 weeks use.
Mine sits in my old G1 cradle
Sent from my ZTE Blade using Tapatalk
I'm using one of these, got it on ebay:
"PREMIUM WINDSCREEN CAR HOLDER FOR SAMSUNG i900 OMNIA"
It fits well enough, and is cheap
My first post here, so they wont let me include a link.
Try Nokia CR-115, check out the photos from a Portuguese site.
http://www.androidpt.com/index.php?...88346&limit=10&limitstart=10&Itemid=30#101059
could anyone of you make a foto with the blade inserted in the plate ?
to the nokia and maybe the i900: i clearly want a richter-compatible solution as it is the most comfortable way for me
but the first thing, i will try now, is to use a clingo necklet and try to maybe mount it on an old plate or cutting the richter-holes into it. dont know, if it is a good idea, but we´ll see
I'm using my old HTC Hero Richter plate. Fits okay and no marks yet on my white Blade after 3 weeks use.
Click to expand...
Click to collapse
even if there where marks, i would not care. not even my original backplate fits perfectly. but it is a 100€-handy, it is the cheapest smartphone, i ever had. and as long, as the screen doesnt get hurt, i dont care. it just has to be stable on the mount.
Buy an universal from eBay like this one http :// cgi.ebay.co.uk/CAR-WINDSCREEN-HOLDER-MOUNT-ORANGE-ZTE-BLADE-NEW-/280635418963?pt=UK_Mobiles_Accessories_RL&hash=item41572ca953
like i mentioned several times: i will not use a new system just because of one handy... and universal ones are crap
Hi,
you can buy brodi specific support.
i've just order one, I used one for my iPhone for 2 years and it's really good support.
ref : 511235 Passive holder with tilt swivel (http://www.brodit.com/)
regards
looks good. i just have to find any reseller in germany
The Arkon slimgrip is well worth a go, I got one last week from ebay for £14.
It comes with a windscreen suction mount and a piece of plastic that you can stick to the dash as an alternative place to mount it.
Once your sure it's stuck to the screen you have a great range of adjustment in it as well.
Im using a universal holder from ebay.Was cheap and does the job well.
I got spoiled recently by having a case that had a slide compartment for credit cards on my Note.
I was wondering if anyone had any ideas for the ultimate case ...... I would like to have ability to have at least a credit card (or 2) and my DL , still be able to use a wireless charger (esp in my car ) and still be able to connect to a holster or belt clip.
I saw this and it looked promising (maybe by being detachable it will work with a wireless charger) but no belt clip or holster
http://www.casemecase.com/product/caseme-008-samsung-galaxy-s9-plus-wallet-case/
Any ideas ? (for the case that does it all)
I'm looking for a case similar too. If I find one I will post the link
I found this one on Amazon
https://www.amazon.com/dp/B078XS9ZQM/ref=cm_sw_r_other_apa_cnrABbFA94704
I bought a wallet case at http://www.casemecase.com. After 15 months of use, I bought another one.