Related
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
mitcheloc said:
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
Click to expand...
Click to collapse
the ROM you are talking about isnt exploited to my knowledge... but it is old and i think 3DES has stopped supporting it...
you are also in the wrong Forum... you should have posted in Hermes Windows Mobile 6... download this ROM and try it...
Thanks for the fast reply. I'll switch over to that ROM. Something is definitely up with this ROM though.
Thanks again,
Mitchel
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
marinic said:
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
Click to expand...
Click to collapse
I think it is normal if you are calling someone with the call waiting feature enabled, we won't hear anything either engaged tone or ringing tone as our calls in waiting/queue mode. Only he/she will hear the beep sound stating that someone is calling.
Me too,
I'm come from Bangkok, Thailand and All Rom i ever install is at the same problem (WM5 Original, WM5 O2asia, WM6 Charteux last edition, WM6 Charteux current edition)
Problem is sometime calling, It just no any sound at all and keep showing "Dialing" and may be nothing happen (may be freeze or long wait) when press end key on screen or hangup button. But i don't sure about the reach is busy or cann't connect (Used to ask my friend that his call is busy when i'm calling, he told not) Sometime cann't reach the network, it could happen again, It's seem better when use WM6 (Can ending, not wait for long time)
Is it may be radio ROM?? Or Bug??
Thanks marinic to bringing the issue up.
All my friends using ATOM and me too is facing the problem from the very first ROM to till today the latest ROM of Jiggs.
All other devices show status Waiting while ATOM show status Dialing.
Is this a problem of DialPad or anything else.
Does anyone have any solution. Please inform....
Thanks guys for your responses.
For clarification to powerwoot, my experience so far with call waiting from other handsets like Nokia, Motorola, Sony-Ericsson is the display shows a message "Call Waiting..." and then ringing tone is played. So I come to know that other party is busy with some other conversation.
Hope I make you all understand the problem. For your information this feature worked perfectly in O2 XDA II mini with the official ROM.
Regards,
Marinic.
Bosses...
Why silent? is it very much tough for you guys? Can anybody explain the problem technically in more details??
Best regards.
yes
you are right i have the same problem
is there any way to have the user notified of the status of the party that you are calling?
ie/ if i make a call, and it will display "call waiting..." when i'm trying to reach someone on the other end...
I have a WM6 device. Thanks
This may help...
Hi,
Go to Start>Settings>Phone in Services tab set the settings for Call Waiting to Notify me.
I am not sure, but it may help cause I get status Busy... now at least.
its problem with all windows mobile....
My phone has been great since updating to DCD's latest cocktail but today I started having a really weird problem.
I would manually dial a number in the dialer screen (# was not in my contacts) and it would instead dial a similar number of one of my contacts. Tried it 5 times and even tried soft-resetting and it kept doing it.
After the soft Re-set and clearing my call memory it started choosing a different number to call but still the same issue. The numbers is chose were very similar, all had the same area code and the 1st 2 numbers were the same but after that completely different.
Is there a way to go to the stock dialer? I'm on a Verizon 6800.
Thanks.
Dbl_Tap said:
My phone has been great since updating to DCD's latest cocktail but today I started having a really weird problem.
I would manually dial a number in the dialer screen (# was not in my contacts) and it would instead dial a similar number of one of my contacts. Tried it 5 times and even tried soft-resetting and it kept doing it.
After the soft Re-set and clearing my call memory it started choosing a different number to call but still the same issue. The numbers is chose were very similar, all had the same area code and the 1st 2 numbers were the same but after that completely different.
Is there a way to go to the stock dialer? I'm on a Verizon 6800.
Thanks.
Click to expand...
Click to collapse
Are you talking about smartdialing? If so this is normal
What it is doing is that when you dial a number whether it is in your contacts or not, it is trying to recognize numbers that you have dialed. If it matches it will display the name of the contact and options to give information.
But if you keep dialing and the numbers don't match with any contact then nothing will appear. It will just let you dial the number that you are trying to dial with out having to look through a familiar contact.
it was doing the smart thing narrowing it down as I entered more numbers but after the 6th number nothing matched so it showed just the number in the dialing section of the screen. Hit the send button and it would then choose a contact to dial instead.
Dbl_Tap said:
it was doing the smart thing narrowing it down as I entered more numbers but after the 6th number nothing matched so it showed just the number in the dialing section of the screen. Hit the send button and it would then choose a contact to dial instead.
Click to expand...
Click to collapse
Hmm that is odd... If you dont really use Smart dial, try disabling it in the options menu of the dial screen. This might help. Are you running a custom ROM or Stock?
DCD's newest custom ROM with the custom dial. I was hoping there was a way to load the stock dialer instead to see if that helped.
Wow... funny, I had the same thing happen a few times exactly as described. I dialed the complete 10 digit number and instead it dialed one of my contacts with the same area code and partial prefix. I figured it was just me.
I'll try disabling Smart Dialing and see if that fixes it.
Also I looked at the numbers I called and I was trying to dial XXX-761-2056 but it dialed XXX-709-8039 so not even close. The other time it tried dialing XXX-701-5325.
Dbl_Tap said:
Also I looked at the numbers I called and I was trying to dial XXX-761-2056 but it dialed XXX-709-8039 so not even close. The other time it tried dialing XXX-701-5325.
Click to expand...
Click to collapse
So you guys cooked your own ROMS and when you cooked it you put the Vogue Dialer , Vouge Skin, and Smartdial?
Or the Stock Titan Dialer ?
Because I installed the Vouge options with smartdial and mine works perfectly.
I will provide you with the Mogul / 6800 Big Button CAB which will replace your dialer and the Touch Skin CAB to skin the dialer.... This might work "you can always uninstall it"
I didn't do any cooking, I just took DCD's basic ROM and loaded that but it came with a different dialer than stock for the XV6800.
I'll give those dialers a shot, that a lot.
Turns out that this is the same dialer as the one built into DCD's ROM but what is interesting is no numbers showed on the keypad. It also showed up as HTC HTC Home for the install in remove programs
Well crap. Turns out the HTC HTC Home listing in remove did remove the HTC home plug in but not the dialer and now I've got not #'s on the keys. I can't find the uninstall line for this dialer, any ideas? Oh wait think I found it. The Bullfrog Big Button Dialer right?
I installed the Wizard reTouched dialer (installing it will fix your no number issue). I haven't tried just dialing a random number though... lemme give it a shot.
Ok, I just tested it and it worked fine, let me find the dialer. It looks EXACTLY the same as the "stock" one in DCD's rom, but I found it's a little different.
Ok, here it is, it's attached in the first post of this thread. There are some skins for it too.
http://forum.xda-developers.com/showthread.php?t=315685
I noticed that when I tried to skin the stock dialer it didn't skin right. I'd have no numbers, or some of the buttons wouldn't map right. I installed the dialer in the thread above and I was able to skin it fine, and it makes calls without issue.
P.S. The test number I dialed has the same area code and exchange as a few contacts.
Oh, and the Wizard dialer will show up in your remove programs list.
You guys need to install the Big Button dialer along with the Touch CAB
The Big Button Dialer just installs the Dialer and the Touch CAB skins the Dialer with the key pad.
I have tried the Wizard Retouched one, but I removed it because it looks wack to me because you can't modify it like the big button can.
So for those with not having a dial pad
Install the Mogul Big Button Dialer
Then
The Touch CAB
Or they can pick whichever one they prefer.
You know, choices and all...
J Shed said:
Or they can pick whichever one they prefer.
You know, choices and all...
Click to expand...
Click to collapse
True, but after all it was an opinion not a fact.
Fact is that with the big button dialer and the Touch skin cab it is easy to make your own skins by replacing the ones that the Touch skin cab created.
This is meant for true modifiers. Because you wont have to be installing cab after cab after cab or even worrying about getting a gsm dialer that removes certain features on your phone.
Since I really don't care for the custom dialers I deselected the dialer skin and the smartdailing in DCD's kitchen. Now I have an original WM6 Dialer with WM6 smartdialing and I really like it.
[email protected]$ said:
True, but after all it was an opinion not a fact.
Fact is that with the big button dialer and the Touch skin cab it is easy to make your own skins by replacing the ones that the Touch skin cab created.
This is meant for true modifiers. Because you wont have to be installing cab after cab after cab or even worrying about getting a gsm dialer that removes certain features on your phone.
Click to expand...
Click to collapse
UPDATE
I am assuming you guys use CDMA since it is a TITAN Forum. Be advised that using the Wizard Touch Dialer will not only give you memory leaks, BUT
also disable the ability to use 911 and other features such as the advanced configuration mode on your phone.
Check out post 170 on the same link that redirects you to the Wizard dialer
http://forum.xda-developers.com/showthread.php?t=315685&page=17
Workaround
I have found that when you are dialing a number that is similar, or if it happens more than once, push up on the directional pad after dialing the number which deselects the smart dialing number in the window. then press the green button as usual. This seemed to help and hasn't done it for me in several days.
Serf, Since I'm a newb at custom ROMS I didn't do the kitchen thing. Maybe I need to give that a shot so I can get the stock dialer back.
Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
I love my Mogul but the one thing i cant stand is the slow dialer. I cooked a rom with DCDs latest and picked the bliss dialer or something. No matter which one i pick they are very unresponsive. Does anyone know of a dialing pad that is quick like the Treos.
Thanks
Mike
did you turn off the keypad sounds? on the dialer hit menu>options>keypad: off
I just did and it really helped, but is there anything faster. It is still not responsive enough. If i dial quick, it misses half the keys.
Thanks
Mike
mk23169 said:
I just did and it really helped, but is there anything faster. It is still not responsive enough. If i dial quick, it misses half the keys.
Thanks
Mike
Click to expand...
Click to collapse
I second that. I used to have HP iPaq HW6515 with wm2003 (by the way, first communicator with GPS) and it had THE MOST responsive touch I ever used. I mean, response was in mil-seconds. I saw mogul response as drawback when I first used it but other thingsmade up for it...
I started using Inesoft Address Book about a month ago. I know it isn't free (30.00) but the dialer is fast ( even if you turn on the vibrate key mode ). Its probably more than you are looking for but it might be worth your while.
This is the dialer i just found the other day. with the tones off it is 100x faster than the stock dialer, I haven't noticed any issues with it after a few days.
http://forum.xda-developers.com/showthread.php?t=380466
gc suggested this the other day, and its definitely a keeper for me. by far the fastest and most responsive dialer ive ever used. its a CDMA version of the iPhone dialer.
aguas said:
gc suggested this the other day, and its definitely a keeper for me. by far the fastest and most responsive dialer ive ever used. its a CDMA version of the iPhone dialer.
Click to expand...
Click to collapse
Awesome find, thanks for sharing
wacktool said:
Awesome find, thanks for sharing
Click to expand...
Click to collapse
thank gcincotta
************I had to call 911 just moments ago....the iphone dialer does not dial through to 911*********
Check before you use it!!!!!
rleejr79 said:
************I had to call 911 just moments ago....the iphone dialer does not dial through to 911*********
Check before you use it!!!!!
Click to expand...
Click to collapse
That's because it doesn't work with CDMA phones. ## codes don't work either.
nonegiven said:
That's because it doesn't work with CDMA phones. ## codes don't work either.
Click to expand...
Click to collapse
"Attached Files
File Type: zip iPhone Dialer (CDMA).zip (197.1 KB, 92 views)"
rleejr79 said:
"Attached Files
File Type: zip iPhone Dialer (CDMA).zip (197.1 KB, 92 views)"
Click to expand...
Click to collapse
And? It doesn't work with 911 or ##codes. It also doesn't work with redial or last number dialed. Figure it out.
And? It doesn't work with 911 or ##codes. It also doesn't work with redial or last number dialed. Figure it out.
Click to expand...
Click to collapse
************I had to call 911 just moments ago....the iphone dialer does not dial through to 911*********
Check before you use it!!!!!
Click to expand...
Click to collapse
Ok for the third thread now....this dialer is a CDMA dialer and DOES work with both ## codes AND 911. I'm not sure why 911 wasn't working for you, but it's likely something rewrote registry keys.
gcincotta said:
Ok for the third thread now....this dialer is a CDMA dialer and DOES work with both ## codes AND 911. I'm not sure why 911 wasn't working for you, but it's likely something rewrote registry keys.
Click to expand...
Click to collapse
You're claiming that last number dialed and redial also work?
You're claiming that last number dialed and redial also work?
Click to expand...
Click to collapse
Yes I am. You need to install the dialer and copy EtPhone.dll to \Windows.
nonegiven said:
And? It doesn't work with 911 or ##codes. It also doesn't work with redial or last number dialed. Figure it out.
Click to expand...
Click to collapse
Why the hostility? You told me that it wasn't CDMA, and I was simply showing you that it was in the title of the software. If it did not work on mine, maybe it was a fluke but a fluke that had to be brought to people's attention as reading this single thread did not lead to believe so. I would hate for someone not be aware and not try it, to only have an emergency and not be able to dial 911.
rleejr79 said:
Why the hostility? You told me that it wasn't CDMA, and I was simply showing you that it was in the title of the software. If it did not work on mine, maybe it was a fluke but a fluke that had to be brought to people's attention as reading this single thread did not lead to believe so. I would hate for someone not be aware and not try it, to only have an emergency and not be able to dial 911.
Click to expand...
Click to collapse
Lots of people have trouble with that dialer on CDMA phones. 911, ##codes, data arrows, redial, smartdialing, last number dialed, etc.
Redial and smartdialing didn't work using the etphone.dll in this thread but do work using the one found here: http://forum.xda-developers.com/showthread.php?t=394518 Still a little buggy with the display though.
gcincotta said:
Yes I am. You need to install the dialer and copy EtPhone.dll to \Windows.
Click to expand...
Click to collapse
i get an error trying to copy this to /windows. it wont replace the one already there saying there is some sort of memory error. is it supposed to replace it?
Lots of people have trouble with that dialer on CDMA phones. 911, ##codes, data arrows, redial, smartdialing, last number dialed, etc.
Redial and smartdialing didn't work using the etphone.dll in this thread but do work using the one found here: http://forum.xda-developers.com/showthread.php?t=394518 Still a little buggy with the display though.
Click to expand...
Click to collapse
Ok first of all that is a dialpad skin, NOT a dialer. The dialer it uses is the EXACT same dialer I posted and the one you're saying doesn't work. So I'm not sure what you're doing over there, but everything you just mentioned works perfectly fine on the Titan using the dialer I linked and the provided EtPhone.dll. If you'd like me to record a youtube video showing you it works then I will.